Analysis of displacement damage effects on the charge-coupled device induced by neutrons at Back-n in the China Spallation Neutron Source

Displacement damage effects on the charge-coupled device(CCD)induced by neutrons at the back-streaming white neutron source(Back-n)in the China Spallation Neutron Source(CSNS)are analyzed according to an online irradiation experiment.The hot pixels,random telegraph signal(RTS),mean dark signal,dark current and dark signal non-uniformity(DSNU)induced by Back-n are presented.The dark current is calculated according to the mean dark signal at various integration times.The single-particle displacement damage and transient response are also observed based on the online measurement data.The trends of hot pixels,mean dark signal,DSNU and RTS degradation are related to the integration time and irradiation fluence.The mean dark signal,dark current and DSNU2 are nearly linear with neutron irradiation fluence when nearly all the pixels do not reach saturation.In addition,the mechanisms of the displacement damage effects on the CCD are demonstrated by combining the experimental results and technology computer-aided design(TCAD)simulation.Radiation-induced traps in the space charge region of the CCD will act as generation/recombination centers of electron-hole pairs,leading to an increase in the dark signal.

Radiation-hardened property of single-walled carbon nanotube film-based field-effect transistors under low-energy proton irradiation

Strong C-C bonds,nanoscale cross-section and low atomic number make single-walled carbon nanotubes(SWCNTs)a potential candidate material for integrated circuits(ICs)applied in outer space.However,very little work combines the simulation calculations with the electrical measurements of SWCNT field-effect transistors(FETs),which limits further understanding on the mechanisms of radiation effects.Here,SWCNT film-based FETs were fabricated to explore the total ionizing dose(TID)and displacement damage effect on the electrical performance under low-energy proton irradiation with different fluences up to 1×1015 p/cm2.Large negative shift of the threshold voltage and obvious decrease of the on-state current verified the TID effect caused in the oxide layer.The stability of the subthreshold swing and the off-state current reveals that the displacement damage caused in the CNT layer is not serious,which proves that the CNT film is radiation-hardened.Specially,according to the simulation,we found the displacement damage caused by protons is different in the source/drain contact area and channel area,leading to varying degrees of change for the contact resistance and sheet resistance.Having analyzed the simulation results and electrical measurements,we explained the low-energy proton irradiation mechanism of the CNT FETs,which is essential for the construction of radiation-hardened CNT film-based ICs for aircrafts.

Internal co-seismic deformation and curvature effect based on an analytical approach

In this study, we present a new method to compute internal co-seismic deformations of a homoge- neous sphere, based on our previous approach （Dong et al. 2016）. In practical numerical computations, we consider a strike-slip point source as an example, and compute the vertical co-seismic displacement on different internal spherical surfaces （including the Earth surface）. Numerical results show that the internal co-seismic deformations are generally larger than that on the Earth surface; especially, the maximum co-seismic displacement appears around the seismic source. The co-seismic displacements are opposite in sign for the areas over and beneath the position of the seismic source. The results also indicate that the curvature effect of the internal deformation is pretty large, and larger than that on the Earth surface. The results indicate that the dislocation theory for a sphere is necessary in computing internal co-seismic deformations.

Study of Polymer Flooding in Heterogeneous Porous Media by Using Nuclear Magnetic Resonance

Polymer has been successfully used to enhance crude oil recovery at high water cut stage.However,the application of polymer flooding is limited by the heterogeneity of reservoir.In this work,the role of polymer flooding in heterogeneous reservoir was explored by nuclear magnetic resonance(NMR)spectroscopy.Parallel core displacement experiments were carried out to study polymer flooding in heterogeneous formation.The results showed that the polymer flooding area was related to permeability and pore connectivity.At the end of the water flooding stage,the residual oil was not evenly distributed in porous media.The percent crude oil recovery increased with the increase of pore diameter.Crude oil recovery from cores with larger pores was higher,and water broke through the highly permeable core first.After 0.3 PV polymer injection,the water mobility of the high permeability core decreased.Polymer injection showed a dual effect,an oil displacement effect and a traction effect.The oil displacement effect was responsible for driving out the crude oil in large pores,whereas the traction effect was responsible for driving out residual oil from small pores.After 1 PV polymer injection,the polymer solution channeled through the highly permeable core rapidly.The crude oil in large pores was washed out completely.The NMR water-phase spectrum line of the highly permeable core was much higher than that of the low permeable core.Under different core permeability and porosity,the NMR peak of the crude oil-phase spectrum line indicated that the polymer flooding is mainly effective on pores>40μm.

Effect of industrial robot use on China’s labor market:Evidence from manufacturing industry segmentation

This paper empirically investigates the impact of industrial robot use on China’s labor market using data from 13 segments of manufacturing industry between 2006 and 2016.According to the findings,the use of industrial robots has a displacement effect on labor demand in manufacturing industry.The specific performance is that for every 1%increase in industrial robot stock,labor demand falls by 1.8%.After endogenous processing and a robustness test,this conclusion remains valid.This paper also discusses the effects of industrial robots across industries and genders.According to the results,industrial robot applications have a more pronounced displacement effect in low-skilled manufacturing than in high-skilled manufacturing.In comparison to female workers,industrial robot applications are more likely to decrease the demand for male workers.Moreover,this paper indicates that the displacement effect is significantly influenced by labor costs.Finally,we make appropriate policy recommendations for the labor market’s employment stability based on the findings.

A time-dependent numerical model of the mild-slope equation

On the basis of the previous studies, the simplest hyperbolic mild-slope equation has been gained and the linear time - dependent numerical model for the water wave propagation has been established combined with different boundary conditions. Through computing the effective surface displacement and transforming into the real transient wave motion, related wave factors will be calculated. Compared with Lin＇s model, analysis shows that calculation stability of the present model is enhanced efficiently, because the truncation errors of this model are only contributed by the dissipation terms, but those of Lin＇s model are induced by the convection terms, dissipation terms and source terms. The tests show that the present model succeeds the merit in Lin＇ s model and the computational program is simpler, the computational time is shorter, and the computational stability is enhanced efficiently. The present model has the capability of simulating transient wave motion by correctly predicting at the speed of wave propagation, which is important for the real - time forecast of the arrival time of surface waves generated in the deep sea. The model is validated against analytical solution for wave diffraction and experimental data for combined wave refraction and diffraction over a submerged elliptic shoal on a slope. Good agreements are obtained. The model can be applied to the theory research an d engineering applications about the wave propagation in a biggish area.

COMPETITIVE INVESTMENT STRATEGIES IN ADOPTION OF NEW TECHNOLOGY WITH A FURTHER NEW TECHNOLOGY ANTICIPATED

In dynamic uncertain environments, the investment timing of the firm about adopting the existing new technology is influenced by the rival's actions and technological progress. This paper employs option games approach to present a simplified duopoly continuous time model of technology adoption. In the model, the irreversible investment in adoption of the existing new technology is in strategic competitive circumstances and facing the threat of a further new technology after the competition setting is established. The purpose of the paper is to examine the effect of technological displacement on firms' strategic investment. The results show that rapid displacement of the technology encourages the leader's investment and discourages the follower's investment. Comparing with the optimal timing without the expectation of a further new technology, the firm hastens to invest when no firm has invested; however, once one firm has invested first, the firm will delay its investment. Using mixed strategy analysis, competitive investment strategies with sequential exercise and simultaneous exercise are derived.