Chitosan/poly(ε-caprolactone) (PCL) blend films in different mass ratios were prepared using the chitosan/PCL mixture solutions in 80 vol.-% acetic acid by spin coating. Their surface micromorphologies were assessed ...Chitosan/poly(ε-caprolactone) (PCL) blend films in different mass ratios were prepared using the chitosan/PCL mixture solutions in 80 vol.-% acetic acid by spin coating. Their surface micromorphologies were assessed by atomic force microscopy (AFM). It was found that the micromorphology of chitosan/PCL blend films was in large extent related to the mass ratio of chitosan. 25 wt% chitosan/PCL blend film presented microphase separation. The protein adsorption of bovine serum albumin (BSA) onto chitosan/PCL blend films was investigated by using quartz crystal microbalance with dissipation monitoring (QCM-D) in real time. The results suggested that the amount of adsorbed BSA on the chitosan/PCL blend films decreased with the addition of chitosan, but the structure and viscoelastic properties of the adsorbed BSA layers were greatly affected by the surface micromorphology of chitosan/PCL blend films. BSA absorbed on the 25 wt% chitosan/PCL blend film with microphase separa- tion showed larger adsorption reversibility, and preferred to form a loose, dissipative layer in comparison with those on other chitosan/PCL blend films without microphase separation.展开更多
On the basis of thin film lubrication theory, the influence of fluid film(disordered film), ordered film and adsorbed film on tribological behavior of lubricating oil in thin-film lubrication(TFL) regime was studied. ...On the basis of thin film lubrication theory, the influence of fluid film(disordered film), ordered film and adsorbed film on tribological behavior of lubricating oil in thin-film lubrication(TFL) regime was studied. The μ-L(friction coefficient versus load) curves of different oil viscosity and additive dosage were obtained by a high frequency reciprocating test rig and the adsorption capacity of additive on steel surface were measured by QCM-D. Based on the Stribeck curve and thin film lubrication theory model, some conclusions can be drawn up, namely:(1) The μ-L curves and the parameters of L0 and μ0, obtained from the high frequency reciprocating test rig with ball-disc contact, can be used to study tribological behaviors of lubricating oil under TFL conditions.(2) In comparison with the high viscosity base fluid, the lower one can enter into TFL regime under lower load and keeps a lower friction coefficient in TFL regime.(3) The polar molecules in additive formulation produce ordered adsorbed layer on steel surface to reduce friction coefficient. And in TFL regime, the molecule's polarity, layer thickness and saturation degree on steel surface probably can influence lubricant's tribological behaviors between the moving interfaces. Moreover, the further study would be focused on the competitive adsorption of different additives, the formation of dual- and/or tri-molecular adsorption layers, and other aspects.展开更多
The effects of surface adsorption of bovine serum albumin(BSA) and human gamma-globulin(HGG) on the tribological performance of a DLC film were investigated using a quartz crystal microbalance with dissipation(QCM-D),...The effects of surface adsorption of bovine serum albumin(BSA) and human gamma-globulin(HGG) on the tribological performance of a DLC film were investigated using a quartz crystal microbalance with dissipation(QCM-D), a ball-on-disk reciprocating tribometer, and a three-electrode electrochemical cell. The results showed that the wear depth in the BSA solution was higher than that in the HGG solution. In the HGG solution, the HGG-adsorbed layer could act as a lubricating layer and protect the DLC film from wear. The wear volume of DLC film in BSA and HGG mixture solution was higher than that in single HGG solution. This may be because the BSA molecules inhibit the formation of HGG adsorbed layer during sliding.展开更多
基金Supported by the National Natural Science Foundation of China(Grant No.20504018)the National High Technology Research and Development Program of China(863 Program)(Grant No.2007AA09Z440)
文摘Chitosan/poly(ε-caprolactone) (PCL) blend films in different mass ratios were prepared using the chitosan/PCL mixture solutions in 80 vol.-% acetic acid by spin coating. Their surface micromorphologies were assessed by atomic force microscopy (AFM). It was found that the micromorphology of chitosan/PCL blend films was in large extent related to the mass ratio of chitosan. 25 wt% chitosan/PCL blend film presented microphase separation. The protein adsorption of bovine serum albumin (BSA) onto chitosan/PCL blend films was investigated by using quartz crystal microbalance with dissipation monitoring (QCM-D) in real time. The results suggested that the amount of adsorbed BSA on the chitosan/PCL blend films decreased with the addition of chitosan, but the structure and viscoelastic properties of the adsorbed BSA layers were greatly affected by the surface micromorphology of chitosan/PCL blend films. BSA absorbed on the 25 wt% chitosan/PCL blend film with microphase separa- tion showed larger adsorption reversibility, and preferred to form a loose, dissipative layer in comparison with those on other chitosan/PCL blend films without microphase separation.
基金the PetroChina for its financial support (Grant number: 2011B-2503-2)
文摘On the basis of thin film lubrication theory, the influence of fluid film(disordered film), ordered film and adsorbed film on tribological behavior of lubricating oil in thin-film lubrication(TFL) regime was studied. The μ-L(friction coefficient versus load) curves of different oil viscosity and additive dosage were obtained by a high frequency reciprocating test rig and the adsorption capacity of additive on steel surface were measured by QCM-D. Based on the Stribeck curve and thin film lubrication theory model, some conclusions can be drawn up, namely:(1) The μ-L curves and the parameters of L0 and μ0, obtained from the high frequency reciprocating test rig with ball-disc contact, can be used to study tribological behaviors of lubricating oil under TFL conditions.(2) In comparison with the high viscosity base fluid, the lower one can enter into TFL regime under lower load and keeps a lower friction coefficient in TFL regime.(3) The polar molecules in additive formulation produce ordered adsorbed layer on steel surface to reduce friction coefficient. And in TFL regime, the molecule's polarity, layer thickness and saturation degree on steel surface probably can influence lubricant's tribological behaviors between the moving interfaces. Moreover, the further study would be focused on the competitive adsorption of different additives, the formation of dual- and/or tri-molecular adsorption layers, and other aspects.
基金Funded by the National Natural Science Foundation of China(No.31570958)Science and Technology Support Program of Sichuan Province(No.2016SZ0007)
文摘The effects of surface adsorption of bovine serum albumin(BSA) and human gamma-globulin(HGG) on the tribological performance of a DLC film were investigated using a quartz crystal microbalance with dissipation(QCM-D), a ball-on-disk reciprocating tribometer, and a three-electrode electrochemical cell. The results showed that the wear depth in the BSA solution was higher than that in the HGG solution. In the HGG solution, the HGG-adsorbed layer could act as a lubricating layer and protect the DLC film from wear. The wear volume of DLC film in BSA and HGG mixture solution was higher than that in single HGG solution. This may be because the BSA molecules inhibit the formation of HGG adsorbed layer during sliding.
