Cascade Kalman filter for gravity anomaly distortion correction based on second order potential model

Using a gravity anomaly covariance function based on the second-order Ganssian Markov gravity anomaly potential model, the state equation of a gravity anomaly signal is obtained in marine gravimetry. Combined with the system state equation and the measurement equation, a new method of the cascade Kalman filter is proposed and applied to the correction of gravity anomaly distortion. In the signal processing procedure, an inverse Kalman filter is used to restore the gravity anomaly signal and high frequency noises first. Then an adaptive Kalman filter, which uses the gravity anomaly state equation as the system equation, is set to estimate the actual gravity anomaly data. Emulations and experiments indicate that both the cascade Kalman filter method and the single inverse Kalman filter method are effective in alleviating the distortion of the gravity anomaly signal, but the performance of the cascade Kalman filter method is better than that of the single inverse Kalman filter method.

X-ray image distortion correction based on SVR

X-ray image has been widely used in many fields such as medical diagnosis,industrial inspection,and so on.Unfortunately,due to the physical characteristics of X-ray and imaging system,distortion of the projected image will happen,which restrict the application of X-ray image,especially in high accuracy fields.Distortion correction can be performed using algorithms that can be classified as global or local according to the method used,both having specific advantages and disadvantages.In this paper,a new global method based on support vector regression（SVR）machine for distortion correction is proposed.In order to test the presented method,a calibration phantom is specially designed for this purpose.A comparison of the proposed method with the traditional global distortion correction techniques is performed.The experimental results show that the proposed correction method performs better than the traditional global one.

Straight line feature based image distortion correction

An image distortion correction method is proposed, which uses the straight line features. Many parallel lines of different direction from different images were extracted, and then were used to optimize the distortion parameters by nonlinear least square. The thought of step by step was added when the optimization method working. 3D world coordination is not need to know, and the method is easy to implement. The experiment result shows its high accuracy.

Correction Optimization of Lens Radial Distortion with Bending Measurement Function

In this paper, a distortion correction method with reduced complexity is proposed. With the singleparameter division model, the initial approximation of distortion parameters and the distortion center can be calibrated. Based on the distance from the image center to the fitting lines of the extracted curves, a bending measurement function with a weighted factor is proposed to optimize the initial value. Simulation and experiments verify the proposed method.

Stick-slip nonuniform rotation distortion correction in distal scanning optical coherence tomography catheters

We present a robust and fiducial-marker-free algorithm that can identify and correct stick-slip distortion caused by nonuniform rotation(or beam scanning)in distally scanned catheters for endoscopic optical coherence tomography(OCT)images.This algorithm employs spatial fre-quency analysis to select and remove distortions.We demonstrate the feasibility of this algorithm on images acquired from ex vivo rat colon with a distally scanned DC motor-based endoscope.The proposed algorithm can be applied to general endoscopic OCT images for correcting non-uniform rotation distortion.

Application of the Delaunay triangulation interpolation in distortion XRII image

To alleviate the distortion of XRII X-ray image intensifier images in the C-arm CT computer tomography imaging system an algorithm based on the Delaunay triangulation interpolation is proposed.First the causes of the phenomenon the classical correction algorithms and the Delaunay triangulation interpolation are analyzed.Then the algorithm procedure is explained using flow charts and illustrations. Finally experiments are described to demonstrate its effectiveness and feasibility. Experimental results demonstrate that the Delaunay triangulation interpolation can have the following effects.In the case of the same center the root mean square distances RMSD and standard deviation STD between the corrected image with Delaunay triangulation interpolation and the ideal image are 5.760 4 ×10 -14 and 5.354 2 ×10 -14 respectively.They increase to 1.790 3 2.388 8 2.338 8 and 1.262 0 1.268 1 1.202 6 after applying the quartic polynomial model L1 and model L2 to the distorted images respectively.The RMSDs and STDs between the corrected image with the Delaunay triangulation interpolation and the ideal image are 2.489 × 10 -13 and 2.449 8 ×10 -13 when their centers do not coincide. When the quartic polynomial model L1 and model L2 are applied to the distorted images they are 1.770 3 2.388 8 2.338 8 and 1.269 9 1.268 1 1.202 6 respectively.

BUNDLE ADJUSTMENTS CCD CAMERA CALIBRATION BASED ON COLLI NEARITY EQUATION

The solid template CCD camera calibration method of bundle adjustments basedon collinearity equation is presented considering the characteristics of space large-dimensionon-line measurement. In the method, a more comprehensive camera model is adopted which is based onthe pinhole model extended with distortions corrections. In the process of calibration, calibrationprecision is improved by imaging at different locations in the whole measurement space,multi-imaging at the same location and bundle adjustments optimization. The calibration experimentproves that the calibration method is able to fulfill calibration requirement of CCD camera appliedto vision measurement.

Evaluation and extraction of weak gravity and magnetic anomalies

In this paper, I introduce what are called weak gravity and magnetic anomalies and propose standards for estimating their reliability. I also introduce new techniques for processing this kind of weak anomaly. These techniques consist of interference elimination and weak signal extraction. Practical applications have proved their effectiveness, Weak gravity and magnetic anomalies will get more attention with the development of targeted exploration.

Spatial weight matrix in dimensionality reduction reconstruction for microelectromechanical system-based photoacoustic microscopy

A micro-electromechanical system(MEMS)scanning mirror accelerates the raster scanning of optical-resolution photoacoustic microscopy(OR-PAM).However,the nonlinear tilt angular-voltage characteristic of a MEMS mirror introduces distortion into the maximum back-projection image.Moreover,the size of the airy disk,ultrasonic sensor properties,and thermal effects decrease the resolution.Thus,in this study,we proposed a spatial weight matrix(SWM)with a dimensionality reduction for image reconstruction.The three-layer SWM contains the invariable information of the system,which includes a spatial dependent distortion correction and 3D deconvolution.We employed an ordinal-valued Markov random field and the Harris Stephen algorithm,as well as a modified delay-and-sum method during a time reversal.The results from the experiments and a quantitative analysis demonstrate that images can be effectively reconstructed using an SWM;this is also true for severely distorted images.The index of the mutual information between the reference images and registered images was 70.33 times higher than the initial index,on average.Moreover,the peak signal-to-noise ratio was increased by 17.08%after 3D deconvolution.This accomplishment offers a practical approach to image reconstruction and a promising method to achieve a real-time distortion correction for MEMS-based OR-PAM.

A corrected method of distorted printed circuit board image

This paper proposes a corrected method of distorted image based on adaptive control. First, the adaptive control relationship of pixel point positions between distorted image and its corrected image is given by using polynomial fitting, thus control point pairs between the distorted image and its corrected image are found. Secondly, the value of both image distortion centre and polynomial coefficient is obtained with least square method, thus the relationship of each control point pairs is deduced. In the course of distortion image processing, the gray value of the corrected image is changed into integer with bilinear interpolation. Finally, the experiments are performed to correct two distorted printed circuit board images. The results are perfect and the mean square errors of residual error are tiny.

Ray tracing particle image velocimetry-Challenges in the application to a packed bed

Ray tracing Particle Image Velocimetry(RT-PIV)is an optical technique for high resolution velocity measurements in challenging optical systems,such as transparent packed beds,that uses ray tracing to correct for distortions introduced by transparent geometries in the light paths.The ray tracing based correction is a post processing step applied to the raw PIV particle images before classical PIV evaluation.In this study,RT-PIV is performed in the top layer of a body centred cubic(bcc)sphere packing with gaseous flow,where optical access is obtained by the use of transparent N-BK7 glass balls with a diameter of d=40 mm.RT-PIV introduces new experimental and numerical challenges,for example a limited field of view,illumination difficulties,a very large required depth of field and high sensitivity to geometric parameters used in the ray tracing correction.These challenges and their implications are the main scope and discussed in the present work.Further,the validation of the ray tracing reconstruction step is presented and examples for the obtained corrected vector fields in a packed bed are given.The results show the strength of the method in reconstructing velocity fields behind transparent spheres that would not have been accessible by optical measurement techniques without the ray tracing correction.

Lens distortion correction based on one chessboard pattern image

This paper proposes a detection method of chessboard comer to correct camera distortions -including radial distortion, decentering distortion and prism distor- tion. This proposed method could achieve high comer detection rate. Then we used iterative procedure to optimize distortion parameter to minimize distortion residual. In this method, first, non-distortion points are evaluated by four points near image center; secondly, Levenberg-Marquardt nonlinear optimization algorithm was adopted to calculate distortion parameters, and then to correct image by these parameters; thirdly, we calculated comer points on the corrected image, and repeated previous two steps until distortion parameters converge. Results showed the proposed method by iterative procedure can make the impact of slight distortion around image center negligible and the average of distortion residual of one line is almost 0.3 pixels.

Distortion correction for the elemental images of integral imaging by introducing the directional diffuser

A distortion correction method for the elemental images of integral imaging（Ⅱ） by utilizing the directional diffuser is demonstrated. In the traditional Ⅱ, the distortion originating from lens aberration wraps elemental images and degrades the image quality severely. According to the theoretical analysis and experiments, it can be proved that the farther the three-dimensional image is displayed from the lens array, the more serious the distortion is. To analyze the process of eliminating lens distortion, one lens and its corresponding elemental image are separated from the traditional Ⅱ. By introducing the directional diffuser, the aperture stop of the separated optical system changes from the eye＇s pupil to the lens. In terms of contrast experiments, the distortion of the improved display system is corrected effectively. In the experiment, when the distance between the reconstructed image and lens array is equal to 120 mm, the largest lens distortion is decreased from 46.6% to 3.3%.

Correction of dispersion distortion of femtosecond pulses by using the non-planar surface of diffractive optical elements

Peculiarities of propagation of femtosecond pulses through a focusing diffractive optical element (DOE) are considered. It is shown that the time delay between the pulse and phase wavefronts can be decreased by fabricating the DOE on the optimal curvilinear surface.