Preliminary analysis of distribution and variation of perennialmonthly mean water masses in the Bohai Sea,the Huanghai Sea and the East China Sea

On the basis of perennial monthly mean temperature and salinity data, the classification of monthly water masses at the surface and the bottom in the Bohai Sea, the Huanghai Sea and the East China Sea, has been made by using the method of fuzzy cluster from the modified characteristic of water masses in the shallow water area. In this paper, the basic features, growth and decline patterns of water masses in relation to fishing grounds in the whole shelves of the Bohai Sea, the Huanghai Sea and the East China Sea are discussed with emphasis.

Complex Seismic Focus Structure and Earthquake-Triggered Landslide Distribution:Analysis of the 2014 Ludian M_w6.1 Earthquake in Yunnan

Objective The 2014 Ludian Mw6.1 earthquake in Yunnan occurred in a mountainous area with complex tectonics and topography, which caused serious damage as well as co-seismic landslides of an unusual large scale. Because the suspected seismogenic faults on the surface, distribution of aftershocks and focal mechanism solutions are not consistent, it remains difficult to determine what is the real causal fault or seismogenic structure for this event. Actually, it may imply the complicity of the seismic source at depth. In addition, the distribution of the co- seismic landslides also exhibits some diffusion that is different from general eases, likely associated with the seismic focus structure.

Spatial pattern analysis and associations of different growth stages of populations of Abies georgei var.smithii in Southeast Tibet,China

Abies georgei var.smithii is an important plant species in Southeast Tibet,China.It has high ecological value in terms of biodiversity protection,as well as soil and water conservation.We analyzed the spatial pattern and associations of A.georgei var.smithii populations at different growth stages by using Ripley's L function for point pattern analysis.The diameter structure was a nearly reverse 'J' shape.The amount of saplings and medium-sized trees accounts for a large part of the entire population,suggesting a high regeneration rate and an expanding population.In the transition from saplings to medium trees or to large trees,saplings show a significant aggregation distribution at small scales,while medium trees and large trees show a random distribution.There are significant inverse associations between saplings and medium trees and large trees at small scales,while there are no obvious associations between medium trees and large trees.The natural regeneration was affected by interspecific competition,and it was also affected by intraspecific competition.The joint effects of biological characteristics and environmental factors contribute to the spatial distribution pattern and associations of this A.georgei var.sm ithii population.

Impact Analysis of MPL on a PEFC Cell’s Temperature Distribution with Thin PEM and GDL for Operating at Higher Temperature than Usual

According to the New Energy and Industry Technology Development Organization(NEDO)road map 2017 of Japan,polymer electrolyte fuel cell(PEFC)system is required to be operated at 90°C and 100°C for stationary and mobility applications,respectively.However,the general PEFC,which has Nafion membrane is operated within the temperature range between 60°C and 80°C.It is important to understand the temperature distribution in a PEFC cell for analyzing performance on working life span of PEFC.This study focuses on the combination of thin polymer electrolyte membrane(PEM)and thin gas diffusion layer(GDL)to improve power generation performance under relatively higher temperature operation conditions.In addition,this study also focuses on effect of micro porous layer(MPL),which can promote the mass transfer,over temperature distribution.The key aim of this study is to analyze impact of MPL of temperature distribution on the reaction surface(Treact)of a cell of PEFC using thin PEM and GDL with variations of H2 and O2 supply flow rates and their relative humidity(RH)with changing the initial operating temperature(Tini)from 80°C to 100°C.As a result,the distribution of Treact without MPL,for anode and cathode at 80%RH and Tini at 80°C and 90°C,is higher than normal conditions.There is a small difference in temperature distribution among different RH conditions with MPL.The distributions of Treact are relatively flat and almost the same among different RH conditions without MPL at Tini=100°C,while the distributions of Treact with MPL are almost the same among different RH conditions.This study is revealed that more even temperature distribution and higher power generation performance can be obtained in the case without MPL compared to the case with MPL.

Wave Energy Estimation by Using A Statistical Analysis and Wave Buoy Data near the Southern Caspian Sea

Statistical analysis was done on simultaneous wave and wind using data recorded by discus-shape wave buoy. The area is located in the southern Caspian Sea near the Anzali Port. Recorded wave data were obtained through directional spectrum wave analysis. Recorded wind direction and wind speed were obtained through the related time series as well. For 12-month measurements（May 25 2007-2008）, statistical calculations were done to specify the value of nonlinear auto-correlation of wave and wind using the probability distribution function of wave characteristics and statistical analysis in various time periods. The paper also presents and analyzes the amount of wave energy for the area mentioned on the basis of available database. Analyses showed a suitable comparison between the amounts of wave energy in different seasons. As a result, the best period for the largest amount of wave energy was known. Results showed that in the research period, the mean wave and wind auto correlation were about three hours. Among the probability distribution functions, i.e Weibull, Normal, Lognormal and Rayleigh, ＂Weibull＂ had the best consistency with experimental distribution function shown in different diagrams for each season. Results also showed that the mean wave energy in the research period was about 49.88 k W/m and the maximum density of wave energy was found in February and March, 2010.

UHAS-MIDA Software Package: Mass Isotopomer Distribution Analysis-Applying the Inverse Matrix for the Determination of Stable Isotopes of Chromium Distribution during Red Blood Cell Labelling

Clinical assessment of fluid volume status in children during malaria can be taxing and often inaccurate. During malaria, changes in fluid volume are rather multifarious and estimating this parameter, especially in sick children is very challenging for clinicians who frequently rely on indices such as long capillary refill times, tachycardia, central venous pressure and decreased urine volume as guides. Here, we present the UHAS-MIDA, an open-source software tool that calculates the red blood cell (RBC) concentration and blood volume during malaria in children determined using a stable isotope of chromium (53Cr as the label) by gas chromatography-mass spectrometry in selective ion monitoring (GC/MS-SIM) analysis. A key component involves the determination of the compositions of the most abundant naturally occurring isotopes of Cr (50Cr, 52Cr, 53Cr), and converting the proportions into a 3 × 3 matrix. To estimate unknown proportions of chromium isotopic mixtures from the measured abundances of three ions, an inverse matrix was calculated. The inverse together with several inputs is then used to calculate the corrected MS ion abundances. Thus, we constructed the software tool UHAS- MIDA using HTML, CSS/Bootstrap, JavaScript, and PHP scripting languages. The tool enables the user to efficiently determine RBC concentration and fluid volume. The source code, binary packages and associated materials for UHAS-MIDA are freely available at https://github.com/bentil078/Abaye-et-al_UHASmida

A Statistical Analysis of the Fuel Tanks＇ Corrosion Loss over Some Aged Bulk Carriers

This paper deals with modeling corrosion wastage over the fuel tanks＇ structures at the exemplar of ten aged bulk carriers. In this paper, employed method might be treated as a long term one, and it is based on Weibull distribution parameters analysis. The purpose of these analyses is optimal assessing of the average corrosion losses for the bulk carriers＇ fuel tanks areas at different points of time during the whole period of the exploitation, due to uprising the structural stability and safety of bulk carriers in operation. Though, the applied approach, among others, might be of particular importance in determining the amounts （percentage/depths） of time-dependent corrosion losses over different areas of aging bulk carriers＇ fuel tanks during the operational circles, with the ultimate goal of keeping stability and safety of these vital vessels＇ structural components.

Relationships between femoral strength evaluated by nonlinear finite element analysis and BMD,material distribution and geometric morphology

Precisely quantifying the strength of the proximal femur and accurately assessing hip fracture risk would enable those at high risk to be identified so that preventive interventions could be taken.Development of better measures of femoral strength using the clinically

The Thermo-Hydraulic Analysis for Sub-Module of ITER HC-SB TBM Design

As the ITER （international thermonuclear experiment reactor ） project is being carried out further, original parties （ EU, JA, RF ） of ITER had accomplished their ITER TBM （ test blanket module ） design in 2001. China joined the negotiation of 1TER project and planed to develop own TBM modules in 2003. A preliminary design description document （ DDD ） for the CH HCSB （ chinese helium-cooled solid breeder ） TBM module design had been completed at SWIP in 2004. A modified structure design based on the 2004 version had been carried out subsequently. Main modification of structure design is that the sub-module design is adopted instead of the previous integrative module design. The modified design enforces the reliability and the flexibility of TBM module structure. The integral TBM module consists of 9 sub-modules. The thermo-hydraulic analysis for sub-module is very important, because the sub-module as a relative independent module has the most basic function of the test blanket module, such as depositing heat, producing tritium, etc.

Reduction of distortion and improvement of efficiency for gridding of scattered gravity and magnetic data

This paper presents a reasonable gridding-parameters extraction method for setting the optimal interpolation nodes in the gridding of scattered observed data. The method can extract optimized gridding parameters based on the distribution of features in raw data. Modeling analysis proves that distortion caused by gridding can be greatly reduced when using such parameters. We also present some improved technical measures that use human- machine interaction and multi-thread parallel technology to solve inadequacies in traditional gridding software. On the basis of these methods, we have developed software that can be used to grid scattered data using a graphic interface. Finally, a comparison of different gridding parameters on field magnetic data from Ji Lin Province, North China demonstrates the superiority of the proposed method in eliminating the distortions and enhancing gridding efficiency.

Distribution and segregation of dissolved elements in pipeline slab

The chemical composition in a cross section of a high grade pipeline slab was measured point by point （in a scale of 1 μm） using original position statistic distribution analysis （OPA）. The result indicated that negative segregation strips of Si, Mn, Mo, Ni, Cr, Nb, Cu, Ti, and V exist in the two sides 24 mm away from the central line, with a width of 8-12 mm, Negative segregation inside the central line is more severe than that outside the central line, and the highest positive segregation of the elements appears closely by the inner sides of the negative segregation strips. No obvious negative segregation strip of S and P is found. Segregation of the elements in the central area is higher than that in the outer and inner arc areas. The segregation of C, Ti, S, and P is high and that of Cr, Cu, Si, and Mn is low in the slab.

Development of a mass model in estimating weight-wise particle size distribution using digital image processing

Particle size distribution of coarse aggregates through mechanical sieving gives results in terms of cumu- lative mass percent. But digital image processing generated size distribution of particles, while being fast and accurate, is often expressed in terms of area function or number of particles. In this paper, a mass model is developed which converts the image obtained size distribution to mass-wise distribution, mak- ing it readily comparable to mechanical sieving data. The concept of weight/particle ratio is introduced for mass reconstruction from 2D images of particle aggregates. Using this mass model, the effects of several particle shape parameters （such as major axis, minor axis, and equivalent diameter） on sieve-size of the particles is studied. It is shown that the sieve-size of a particle strongly depend upon the shape param- eters, 91% of its variation being explained by major axis, minor axis, bounding box length and equivalent diameter. Furthermore, minor axis gives an overall accurate estimate of particle sieve-size, error in mean size （D-50） being just 0.4%. However, sieve-size of smaller particles （〈20 ram） strongly depends upon the length of the smaller arm of the bounding box enclosing them and sieve-sizes of larger particles （〉20 mm） are highly correlated to their equivalent diameters. Multiple linear regression analysis has been used to generate overall mass-wise particle size distribution, considering the influences of all these shape parameters on particle sieve-size. Multiple linear regression generated overall mass-wise particle size distribution shows a strong correlation with sieve generated data. The adjusted R-square value of the regression analysis is found to be 99 percent （w.r,t cumulative frequency）. The method proposed in this paper provides a time-efficient way of producing accurate （up to 99%） mass-wise PSD using digital image processing and it can be used effectively to renlace the mechanical sieving.

Spatiotemporal heterogeneity of phytoplankton diversity and its relation to water environmental factors in the southern waters of Miaodao Archipelago,China

To study the water quality influenced by the anthropogenic activities and its impact on the phytoplankton diversity in the surface waters of Miaodao Archipelago, the spatiotemporal variations in phytoplankton communities and the environmental properties of the surface waters surrounding the Five Southern Islands of Miaodao Archipelago were investigated, based on seasonal field survey conducted from November 2012 to August 2013. During the survey, a total of 109 phytoplankton species from 3 groups were identified in the southern waters of Miaodao Archipelago, of which 77 were diatoms, 29 were dinoflagellates, and 3 were chrysophytes. Species number was higher in winter（73）, moderate in autumn（70）, but lower in summer（31） and spring（27）. The species richness index in autumn（5.92） and winter（4.28） was higher than that in summer（2.83） and spring（1.41）.The Shannon-Wiener diversity index was high in autumn（2.82）, followed by winter（1.99） and summer（1.92）, and low in spring（0.07）. The species evenness index in autumn（0.46） and summer（0.39） was higher than that in winter（0.32） and spring（0.02）. On the basis of principal component analysis（PCA） and redundancy analysis（RDA）, we found that dissolved inorganic nitrogen（DIN） and chemical oxygen demand（COD） in spring, COD in summer, p H in autumn, and salinity and oil pollutant in winter, respectively, showed the strongest association with the distribution of phytoplankton diversity. The spatial heterogeneity of the southern waters of Miaodao Archipelago was quite obvious, and three zones, i.e., northeastern, southwestern and inter-island water area, were identified by cluster analysis（CA） based on key environmental variables.

THEORETICAL INVESTIGATION ON STATE OF LOAD DISTRIBUTION AMONG CONTACT BEARINGS OF DOUBLE CIRCULAR ARC HELICAL GEARS

A dynamic analysis approcach to investigate the state of load distribution among contact bearings of double circular are belical gears is proposed and a computer program is developed for calculating the factor of iced distribution based on the theory of W-N gears. The changing situations of load distribution among contact bearings of the gears influenced by main issues are analyzed by a series of parametric studies.

Night Vehicle Detection Using Variable Haar-Like Feature

This paper proposes a night-time vehicle detection method using variable Haar-like feature.The specific features of front vehicle cannot be obtained in road image at night-time because of light reflection and ambient light,and it is also difficult to define optimal brightness and color of rear lamp according to road conditions.In comparison,the difference of vehicle region and road surface is more robust for road illumination environment.Thus,we select the candidates of vehicles by analysing the difference,and verify the candidates using those brightness and complexity to detect vehicle correctly.The feature of brightness difference is detected using variable horizontal Haar-like mask according to vehicle size in the location of image.And the region occurring rapid change is selected as the candidate.The proposed method is evaluated by testing on the various real road conditions.

Spatial Distribution Characteristics of Surface Tidal Currents in the Southwest of Taiwan Strait

This study was conducted on the spatial distribution characteristics of surface tidal currents in the southwestern Taiwan Strait based on the quasi-harmonic analysis of current data obtained by two high frequency surface wave radar(HFSWR) systems. The analysis shows that the tidal current pattern in the southwestern Taiwan Strait is primarily semi-diurnal and influenced significantly by shallow water constituents. The spatial distribution of tidal current ellipses of M2 is probably affected by the interaction between two different systems of tide wave, one from the northern mouth of Taiwan Strait and the other from the Bashi Channel. The directions of the major axes of M2 tidal current ellipses coincide roughly with the axis of the Taiwan Strait. The spatial distribution of the magnitudes of the probable maximum current velocity(PMCS) shows gradual increase of the velocity from northeast to southwest, which is in accordance with the spatial distribution of the measured maximum current velocity(MMCS). The directions of the residual currents are in accordance with the direction of the prevailing monsoon wind at the Taiwan Strait and the direction of the Taiwan warm current during summer. The bathymetry also shows a significant effect on the spatial distribution characteristics of tidal currents.

Study on original position statistic quantitative method for the content of Al in inclusions from steels

The inclusions of Al in steels have great influence on the properties and the quality of steels.But there are some difficulties on the content determination of Al inclusions with accuracy and rapidity.Conventional quantity analysis of stable inclusions is electrolysis method with the disadvantages of long analytical period,trivial operation and a little loss of some fine and instable oxides.The content of insoluble aluminum can be obtained by the subtraction between the content of total Al and acid soluble Al determined by chemical methods with the disadvantage of complicate procedure.Original position statistic distribution analysis(OPA) can be used for the determination of inclusions by collecting and discriminating the signals produced by single spark discharge in the way of no pre-sparking,scanning and emitting continuously.In this study the element of Al in some spectrum certified reference materials of carbon and medium or low-alloyed steels was analyzed by original opposition statistic distribution technique.Two quantitative mathematical models used by original position distribution analysis technology for the analysis of the content of Al inclusions have been investigated and been applied to the analysis of the content of Al inclusions in many kinds of spectrum certified reference materials and some medium and low-alloyed steel samples.The scope of application of the models and their limited conditions were discussed.It was found that the results calculated by OPA had great difference with the value by chemical method for some samples with the total content of Al above 0.2%.The reason is that some intensity of abnormal sparks have gone beyond the range of the largest intensity that can be determined by the instrument so that there is a certain deviation on the identification of abnormal sparks and the calculation of threshold value.It was found that the size distribution of Al inclusions had a great influence on the application of the two models.For most of certified reference materials for spectrum analysis and real steel samples the results of the content of Al in inclusions calculated by model 1 was satisfied and had good coincidence with the value of insoluble Al by chemical method. But for the samples with so many large inclusions of Al existed,the influence of intensity should be considered because the signal increase did not vary in the form of simple function.So model 2 was more suitable for the content calculation of Al in inclusions in this case.In order to choose suitable model to be used it is suggested that the size distribution of inclusions should be determined by OPA before content determination of Al in inclusions. The results of the content of Al inclusions calculated by the selected mathematical model were satisfied and had good coincidence with the value of insoluble Al obtained by the subtraction between the content of total Al and soluble Al determined by chemical methods when the content of total aluminum was below 0.2%.

Multifractal modeling of the production of concentrated sugar syrup crystal

High quality, concentrated sugar syrup crystal is produced in a critical step in cane sugar production： the clarification process. It is characterized by two variables： the color of the produced sugar and its clarity degree. We show that the temporal variations of these variables follow power-law distributions and can be well modeled by multiplicative cascade multifractal processes. These interesting properties suggest that the degradation in color and clarity degree has a systemwide cause. In particular, the cascade multifractal model suggests that the degradation in color and clarity degree can be equivalently accounted for by the initial ＂impurities＂ in the sugarcane. Hence, more effective cleaning of the sugarcane before the clarification stage may lead to substantial improvement in the effect of clarification.

Case-specificity and Its Implications in Distribution Network Analysis with Increasing Penetration of Photovoltaic Generation

Distribution system analysis(DSA)currently faces several challenges due to inclusion of distributed energy resources(DERs),which have many characteristics,such as inherent variability,uncertainty,possibility of flexible four quadrant converter operations with distributed generation(DG),and the need for efficient operations to improve reliability of the supply system.This article argues for a high degree of case-specificity and discusses its implications in distribution networks with increasing DG penetration.The research is based on the exhaustive yearly simulation analyses of 132 candidate scenarios and investigates the effects of feeder-specific factors,such as geo-electric size and feeder spread,load density,and phase unbalancing.Nineteen(19)feeder variants—with phase-domain detailed modeling of all feeder components,including DGs,are subjected to increasing penetration of photovoltaic generation without altering the type and location of DGs.The objective is to analyze the role of feederspecific factors on feeder response characteristics in terms of annualized operational parameters,such as energy losses,feeder voltage profile,average power factor,and peak demand at a substation node,as well as tap-changer operations of voltage regulating equipment and their interaction with shunt compensation.Recorded annual load profiles—industrial,commercial,and residential—as well as location specific weather data are used to simulate the candidate scenarios based on three IEEE test feeders and one actual spot network in India.Results signify the consideration of feeder-specific factors in the planning exercise of grouping“similar”feeders for formulating the strategies that can improve daily operations of distribution feeders.The demonstrated case-specificity also implies that optimization algorithms for improved operations with DGs will need to be based on an integrated approach that accounts for feeder-specific factors as well as cyclic variability of DERs.

Power distribution analysis for multiple modulation formats in an all-optical sampling wavelength division multiplexing system

An optimal power distribution analysis for an all-optical sampling orthagonal frequency division multiplexing(OFDM) scheme with multiple modulation formats including diferential phase shift keyed(DPSK), diferential quadrature phase shift keyed(DQPSK), and non-return-to-zero(NRZ) is proposed. The noise tolerances of different modulation formats are analyzed, and the optimal input power ratio between phase and intensity modulation formats for the best overall receiving performance is investigated under unchanged total input power. Moreover, this scheme can seamlessly coexist with the traditional WDM channel.