Design of Non-contact On-load Automatic Regulating Voltage Transformer

At present, an automatic-mechanic contact tap-changer is widely used in power system, but it can not frequently operate. In addition, arc will occur when the switch changes. In order to solve these two problems, this paper presented an automatic on-load voltage-regulating distributing transformer which employed non-contact solid-state relay as tap-changer, and mainly introduced its structure, basic principal, design method of each key link and experimental results. Laboratory simulation experiments informed that the scheme was feasible. It was a smooth and effective experiment device, which was practical in application.

Parametric Collaborative Design of Network-based Mechanical Products

Aiming at the problems of low-level information sharing, slow transmission and repetitive work in the designing process of product series, the internet-oriented parametric collaborative design method is proposed, in which the problems of sharing conflict and network heterogeneous in the distributed collaborative design are analyzed, and the construction method of collaborative design platforms based on PDMWorks Workgroup is put forward. Through studying the mechanism of roles distribution and function allocation and data concurrency control, the communication mechanism of internet-oriented collaborative design is formulated. On the basis of structure features of overhead travelling crane, through combining parametric variant design with collaborative design, internet-oriented parametric collaborative design system of overhead travelling crane is developed and verified through main girder design. In the paper, the internet-oriented parametric collaborative design method is proposed, aiming to solve the problems of low-level information sharing, slow transmission and repetitive work in the designing process of product series. The problems of sharing conflict and network heterogeneous in the distributed collaborative design are analyzed. The construction method of collaborative design platforms based on PDMWorks Workgroup is put forward. The communication mechanism of internet-oriented collaborative design is formulated, through studying the mechanism of roles distribution and function allocation and data concurrency control. On the basis of structure features of overhead travelling crane, through combining parametric variant design with collaborative design, internet-oriented parametric collaborative design system of overhead travelling crane is developed and verified through main girder design.

Knowledge-Based Platform for Collaborative Innovation Development of Products

The platform of distributed design and resource sharing is important for medium-sized and small companies in developing products to improve competitiveness. As a background of creative product design, a knowledge model based on product collaborative innovation development of products (CIDP) is proposed. Characteristics of CIDP are analyzed, and the framework and key technologies of the CIDP-platform based knowledge studied. Through integration of existing system and interface designs, a development platform has been built to support the PCID within knowledge-based engineering (KBE). An example is presented, indicating that the prototype system is maneuverable and practical.

CHARACTERISTCS OF FLUID FILM IN OPTIMIZED SPIRAL GROOVE MECHANICAL SEAL

In order to investigate the sealing performance variation resulted from the thermal deformation of the end faces, the equations to calculate the fluid film pressure distribution, the bearing force and the leakage rate are derived, for the fluid film both in parallel gap and in wedgy gap. The geometrical parameters of the sealing members are optimized by means of heat transfer analysis and complex method. The analysis results indicate that the shallow spiral grooves can generate hydrodynamic pressure while the rotating ring rotates and the bearing force of the fluid film in spiral groove end faces is much larger than that in the flat end faces. The deformation increases the bearing force of the fluid film in flat end faces, but it decreases the hydrodynamic pressure of the fluid film in spiral groove end faces. The gap dimensions which determine the characteristics of the fluid film is obtained by coupling analysis of the frictional heat and the thermal deformation in consideration of the equilibrium condition of the bearing force and the closing force. For different gap dimensions, the relation- ship between the closing force and the leakage rate is also investigated, based on which the leakage rate can be controlled by adjusting the closing force.

Waveguide distribution system of the HEPS linac

Purpose The High-Energy Photon Source(HEPS)is a 6 GeV storage ring-based light source under construction in Beijing,China.Its accelerator consists of a 6 GeV storage ring,a full-energy booster,an S-band normal-conducting 500 MeV linac,and three transport lines.As the beginning of HEPS,a stable linac is quite important,which needs a qualified waveguide distribution system to transmit microwave power from klystrons to accelerating structures.Methods Installation and high-power conditioning of the HEPS linac were performed from February to September 2022.The assembly and conditioning of the waveguide distribution system were completed in April and July,respectively.The design of the waveguide distribution system began in 2018 and was finalized at the end of 2020 after multiple iterations.Results Owing to careful design,fabrication,and assembly preparation,the assembly and conditioning of the system proceeded smoothly and considerable time was saved.Conclusion The entire process from the design to the ultimate realization of the system is introduced in detail in this paper.Satisfactory measurement results were obtained for some waveguide components.