Direct Yaw Moment Control for Distributed Drive Electric Vehicle Handling Performance Improvement

For a distributed drive electric vehicle（DDEV） driven by four in-wheel motors, advanced vehicle dynamic control methods can be realized easily because motors can be controlled independently, quickly and precisely. And direct yaw-moment control（DYC） has been widely studied and applied to vehicle stability control. Good vehicle handling performance： quick yaw rate transient response, small overshoot, high steady yaw rate gain, etc, is required by drivers under normal conditions, which is less concerned, however. Based on the hierarchical control methodology, a novel control system using direct yaw moment control for improving handling performance of a distributed drive electric vehicle especially under normal driving conditions has been proposed. The upper-loop control system consists of two parts： a state feedback controller, which aims to realize the ideal transient response of yaw rate, with a vehicle sideslip angle observer; and a steering wheel angle feedforward controller designed to achieve a desired yaw rate steady gain. Under the restriction of the effect of poles and zeros in the closed-loop transfer function on the system response and the capacity of in-wheel motors, the integrated time and absolute error（ITAE） function is utilized as the cost function in the optimal control to calculate the ideal eigen frequency and damper coefficient of the system and obtain optimal feedback matrix and feedforward matrix. Simulations and experiments with a DDEV under multiple maneuvers are carried out and show the effectiveness of the proposed method： yaw rate rising time is reduced, steady yaw rate gain is increased, vehicle steering characteristic is close to neutral steer and drivers burdens are also reduced. The control system improves vehicle handling performance under normal conditions in both transient and steady response. State feedback control instead of model following control is introduced in the control system so that the sense of control intervention to drivers is relieved.

Research on Direct Yaw Moment Control Strategy of Distributed-Drive Electric Vehicle Based on Joint Observer

Combined with the characteristics of the distributed-drive electric vehicle and direct yaw moment control,a double-layer structure direct yaw moment controller is designed.The upper additional yaw moment controller is constructed based on model predictive control.Aiming at minimizing the utilization rate of tire adhesion and constrained by the working characteristics of motor system and brake system,a quadratic programming active set was designed to optimize the distribution of additional yaw moments.The road surface adhesion coefficient has a great impact on the reliability of direct yaw moment control,for which joint observer of vehicle state parameters and road surface parameters is designed by using unscented Kalman filter algorithm,which correlates vehicle state observer and road surface parameter observer to form closed-loop feedback correction.The results show that compared to the“feedforward+feedback”control,the vehicle’s error of yaw rate and sideslip angle by the model predictive control is smaller,which can improve the vehicle stability effectively.In addition,according to the results of the docking road simulation test,the joint observer of vehicle state and road surface parameters can improve the adaptability of the vehicle stability controller to the road conditions with variable adhesion coefficients.

STUDY ON LOADS AND CONTACT STRESSES FOR TOROIDAL DRIVE

The load distribution and calculating formulae of the contact stresses in the rotor worm and stator helical surface for toroidal drive are given. The effecting factors on contact stresses and their effects are analyzed. The results is useful for reference purposes in manufacture and design of the drive.

Combined Estimation of Vehicle Dynamic State and Inertial Parameter for Electric Vehicles Based on Dual Central Difference Kalman Filter Method

Distributed drive electric vehicles(DDEVs)possess great advantages in the viewpoint of fuel consumption,environment protection and traffic mobility.Whereas the effects of inertial parameter variation in DDEV control system become much more pronounced due to the drastic reduction of vehicle weights and body size,and inertial parameter has seldom been tackled and systematically estimated.This paper presents a dual central difference Kalman filter(DCDKF)where two Kalman filters run in parallel to simultaneously estimate vehicle different dynamic states and inertial parameters,such as vehicle sideslip angle,vehicle mass,vehicle yaw moment of inertia,the distance from the front axle to centre of gravity.The proposed estimation method only integrates and utilizes real-time measurements of hub torque information and other in-vehicle sensors from standard DDEVs.The four-wheel nonlinear vehicle dynamics estimation model considering payload variations,Pacejka tire model,wheel and motor dynamics model is developed,the observability of the DCDKF observer is analysed and derived via Lie derivative and differential geometry theory.To address system nonlinearities in vehicle dynamics estimation,the DCDKF and dual extended Kalman filter(DEKF)are also investigated and compared.Simulation with various maneuvers are carried out to verify the effectiveness of the proposed method using Matlab/Simulink-CarsimR.The results show that the proposed DCDKF method can effectively estimate vehicle dynamic states and inertial parameters despite the existence of payload variations and variable driving conditions.This research provides a boot-strapping procedure which can performs optimal estimation to estimate simultaneously vehicle system state and inertial parameter with high accuracy and real-time ability.

Human-Machine Shared Lateral Control Strategy for Intelligent Vehicles Based on Human Driver Risk Perception Reliability

Intelligent vehicle(Ⅳ)technology has developed rapidly in recent years.However,achieving fully unmanned driving still presents numerous challenges,which means that human drivers will continue to play a vital role in vehicle operation for the foreseeable future.Human-machine shared driving,involving cooperation between a human driver and an automated driving system(AVS),has been widely regarded as a necessary stage for the development of IVs.Focusing onⅣdriving safety,this study proposed a human-machine shared lateral control strategy(HSLCS)based on the reliability of driver risk perception.The HSLCS starts by identifying the effective areas of driver risk perception based on eye movements.It establishes an anisotropic driving risk field,which serves as the foundation for the AVS to assess risk levels.Building upon the cumulative and diminishing effects of risk perception,the proposed approach leverages the driver's risk perception effective area and converts the risk field into a representation aligned with the driver's perspective.Subsequently,it quantifies the reliability of the driver's risk perception by using area-matching rules.Finally,based on the driver’s risk perception reliability and dif-ferences in lateral driving operation between the human driver and the AVS,the dynamic distribution of driving authority is achieved through a fuzzy rule-based system,and the human-machine shared lateral control is completed by using model predictive control.The HSLCS was tested across various scenarios on a driver-in-the-loop test platform.The results show that the HSLCS can realize the synergy and complementarity of human and machine intelligence,effectively ensuring the safety ofⅣoperation.

Progress in Automotive Transmission Technology

Much progress has been made in the development of automotive transmissions over the past 20 years,e.g.,an increased speed number,expanded ratio spread and improved efficiency and shift quality.Automotive transmissions are moving toward electrification in response to stringent legislation on emissions and the pressing demand for better fuel economy.This paper reviews progress in automotive transmission technology.Assisted by computer-aided programs,new transmission schemes are constantly being developed.We therefore first introduce the synthesis of the transmission scheme and parameter optimization.We then discuss the progress in the transmission technology of a conventional internal combustion engine vehicle in terms of new layouts;improved efficiency;noise,vibration and harshness technology;and the shifting strategy and control technology.As the major development trend,transmission electrification is subsequently discussed;this discussion includes the configuration design,energy management strategy,hybrid mode shifting control,single-speed and multi-speed electric vehicle transmission and distributed electric drive.Finally,a summary and outlook are presented for conventional automotive transmissions,hybrid transmissions and electric vehicle transmissions.