Architecture of HLA Based Distributed Virtual Geographic Environment

Integrating the theory of distributed virtual geographic environment (DVGE) and high level architecture(HLA), the architecture of DVGE based on HLA is designed. The data flow and the object models of the architecture are also discussed. The architecture basically meets the need of DVGE in real-time communication, distribution, collaboration, reusing and interoperation, expansion, and standard.

A Mobile Agent-Based Prototype of HeterogeneousDistributed Virtual Environment Systems

Mobile agents provide a new method for the distributed computation. This paper presents the advantages of using mobile agents in a distributed virtual environment (DVE) system, and describes the architecture of heterogeneous computer's distributed virtual environment system (HCWES) designed to populate some mobile agents as well as stationary agents. Finally, the paper introduces how heterogeneous computer network communication is to be realized.

Types, Metallogenic Environments and Characteristics of Temporal and Spatial Distribution of Copper Deposits in China

Based upon a comprehensive study of 123 copper deposits in China. this paper reaches the following conclusions: 1. The crust in China was solidified pretty late; with the accretion of the plate, the copper mineralization moved towards its margin in space and became successively younger in age. 2. The major copper ore types ever found in the world have mostly been discovered in China, in which the porphyry type seems to be the most important and the massive sulfide type in the transitional bed between marine clastic and carbonate rocks is clearly defined. 3. Carbonate strata are widespread in China and their deposition lasted for a long geological period, so the proportion of copper deposits occurring in them is large as compared with other parts of the world. 4. Seven metallogenic epochs can be recognized, in which the Mesozoic one plays the leading role and the middle(late) Palaeozoic and Cenozoic ones are next in importance. Mineralization was comparatively simple in the early geological period. and became diversified later on. In the early epochs copper deposits related to basaltic magmatism and metamorphosed marine sediments predominated, whereas in the later epochs those related to granitic magmatism and continental sedimentation were dominant. 5. There exist in China thirteen metallogenic provinces, of which the Lower Yangtze downwarping belt, Sanjiang fold system, Jiangnan axis and Xikang-Yunnan axis are of greater significance. 6. The crustal mobility in China was rather pronounced, the polycyclic evolution of the crust has resulted in such obvious phenomena as the inheritance of mineralization, the coexistence of various types and the superposition of different genetic types.

Authorization Administration in a Distributed Multi-application Environment

To meet the authorization administration requirements in a distributedcomputer network environment, this paper extends the role-based access control model with multipleapplication dimensions and establishes a new access control model ED-RBAC(Extended Role Based AccessControl Model) for the distributed environment. We propose an extendable hierarchical authorizationassignment framework and design effective role-registeringi role-applying and role-assigningprotocol with symmetric and asymmetric cryptographic systems. The model can be used to simplifyauthorization administration in a distributed environment with multiple applications.

Novel ensemble learning based on multiple section distribution in distributed environment

Because most ensemble learning algorithms use the centralized model, and the training instances must be centralized on a single station, it is difficult to centralize the training data on a station. A distributed ensemble learning algorithm is proposed which has two kinds of weight genes of instances that denote the global distribution and the local distribution. Instead of the repeated sampling method in the standard ensemble learning, non-balance sampling from each station is used to train the base classifier set of each station. The concept of the effective nearby region for local integration classifier is proposed, and is used for the dynamic integration method of multiple classifiers in distributed environment. The experiments show that the ensemble learning algorithm in distributed environment proposed could reduce the time of training the base classifiers effectively, and ensure the classify performance is as same as the centralized learning method.

A Distributed LRTCO Algorithm in Large-Scale DVE Multimedia Systems

In the large-scale Distributed Virtual Environment(DVE)multimedia systems,one of key challenges is to distributedly preserve causal order delivery of messages in real time.Most of the existing causal order control approaches with real-time constraints use vector time as causal control information which is closely coupled with system scales.As the scale expands,each message is attached a large amount of control information that introduces too much network transmission overhead to maintain the real-time causal order delivery.In this article,a novel Lightweight Real-Time Causal Order(LRTCO)algorithm is proposed for large-scale DVE multimedia systems.LRTCO predicts and compares the network transmission times of messages so as to select the proper causal control information of which the amount is dynamically adapted to the network latency variations and unconcerned with system scales.The control information in LRTCO is effective to preserve causal order delivery of messages and lightweight to maintain the real-time property of DVE systems.Experimental results demonstrate that LRTCO costs low transmission overhead and communication bandwidth,reduces causal order violations efficiently,and improves the scalability of DVE systems.

Research on Application Technology Oriented Rapid Response Manufacturing in the Distributed Network Environment

A new chance of developing traditional manufacturing industry comes forth with the development of network technology. Application technology oriented rapid response manufacturing in the distributed network environments, that is, how to take advantage of the Intranet and Internet, combine the numerous manufacturing resources spread around the region, the country and even the globe is the key to the agile design, manufacturing and the buildup of comprehensively competitive power, at the same time, is also an important research direction in the field of advanced manufacturing technology. Rapid response manufacturing in the distributed network environment is a newly manufactory pattern that can be used to implement the conception of agile design and manufacturing, but there are some new problems coming with it, which will directly influence the enterprise’s ability of rapid response in the distributed network manufacturing pattern and lead to the failure of the league and the lost of the given orders. In this paper, we establish some approaches to solve these problems in product development process. The paper then presents the research on key application technologies and solutions includes: network safety strategy which guarantees data transferring among the leaguer members, production data management based on Web/DOT (Distributed Object Technology) and XML criteria which guarantees data exchange in structure-variance characteristic environments, the network platform which provides the conversion service of different types of CAD files each other. All of these solutions are aim for technology problems existing in the distributed network environments and among the league members. Finally, the paper takes one project, that is, the establishment of the online application service system for Shanghai Advance Manufacturing Technology Research Center as a good instance.

Internet based design of distributed virtual environment for multi-robot teleoperation

Studies the design of distributed virtual environments （DVEs） for tele-multi-robotics. The proposed design, incorporating two models （ distributlon-supported model and VE-supported model）, attempts to represent common functionality, communication issues, and requirements found in multi-operator DVEs. The distribution-supported model concentrates on the introduction of computer-supported collaborative work （CSCW） to realize the coordination of multi-operators, while the VE-supported model concentrates on the utilization of an object-oriented approach to strengthen the expandability and robustness of the system. Finally, the configuration anti running environments of the system are given.

Distributed Trusted Computing for Blockchain-Based Crowdsourcing

A centralized trusted execution environment(TEE)has been extensively studied to provide secure and trusted computing.However,a TEE might become a throughput bottleneck if it is used to evaluate data quality when collecting large-scale data in a crowdsourcing system.It may also have security problems compromised by attackers.Here,we propose a scheme,named dTEE,for building a platform for providing distributed trusted computing by leveraging TEEs.The platform is used as an infrastructure of trusted computations for blockchain-based crowdsourcing systems,especially to securely evaluate data quality and manage remuneration:these operations are handled by a TEE group.First,dTEE uses a public blockchain with smart contracts to manage TEEs without reliance on any trusted third parties.Second,to update TEE registration information and rule out zombie TEEs,dTEE uses a reporting mechanism.To attract TEE owners to join in and provide service of trusted computations,it uses a fair monetary incentive mechanism.Third,to account for malicious attackers,we design a model with Byzantine fault tolerance,not limited to a crash-failure model.Finally,we conduct an extensive evaluation of our design on a local cluster.The results show that dTEE finishes evaluating 10,000 images within one minute and achieves about 65 tps throughput when evaluating Sudoku solution data with collective signatures both in a group of 120 TEEs.

The Network Architecture and Protocols for Distributed Virtual Environment

In this paper, the properties of distributed virtual environment (DVE) and the requirements on computer networks is briefly reviewed. A multicast protocol, called sender initiated grouping multicast protocol for DVE (SIGMP), is proposed. This new multicast protocol is based on a novel concept, multicast group (MG), which divides all participants in a DVE system into groups, among which there is a multicast group trustee (MGT) node to manage the group. The protocol provides unreliable/reliable, totally ordered and multiple to multiple multicast transmission service for DVE systems without sacrificing the communication efficiency heavily. At the same time, reliable unicast and one to multiple multicast transmission services are also supported. The performance analysis of the new protocols is also presented. Based on SIGMP, a simple demonstration of DVE system is designed and implemented. This demo system is running on several SGI workstations connected by a FDDI and Ethernet network.

Integration of Manufacturing Services into Virtual Environments over the Internet

Virtual reality (VR) is a rapidly developing technology that has a wide spectrum of industrial and commercial applications. Networked (distributed or shared) virtual environments (VE) are of growing interest to modern manufacturing industry; a dominating use of networked virtual manufacturing environments (VMEs) is on-line visualisation and collaborative control of 3D information. This has to be supported by real-time data transfer. To meet a broad range of common requirements for Internet-based VE communications, particularly for virtual manufacturing and collaborative design and control, this paper presents a networked virtual environment system that is designed to support networked virtual design and manufacturing. The system is implemented with manufacturing message specification (MMS) standards so as to integrate a range of manufacturing services into networked VEs over the Internet.

Distributed virtual environment-based safety control for Internet tele-robots

The inherent complexity and uncertainty of multi-operator multi-robot （MOMR） tele-operation system make its safeguard an essential problem. Hazardous factors in the system are analyzed using fault tree analysis（FTA） technology, and three-layer interactive safety architecture with information flow is designed in modules to control the factors according to the holistic control mode. After that, distributed virtual environment （DVE） including the characteristics of virtual guide （VG） technology is discussed to help the operators achieve some tasks through the visibility of control commands, time-delay, movement collision and operators＇ intentions. Finally an experiment is implemented to test the efficiency of safety control architecture by using two robots to place some building blocks in the same workspace.

The concept, structure and characteristics of the distributed virtual coal-mine geographical environment

Distributed virtual coal-mine geography environment（CM-DVGE） researches the virtual reality simulation of coal-mine environment in cyberspace and the performance of coal production process. The goal is to deal with the practical safety problems of observation, analysis, design and training during the underground coal production process. This paper first probed into the evolution of CM-DVGE from a historical point of view, then respectively analyzed the characteristics of its physical progressive levels according to the cognitivd law and its logical structure of data on the basis of data flow, and concluded by putting forward the prospect of the application of CM-DVGE, thus enriched and developed the method of synthetic study of coal mine.

A hybrid DVE architecture based on temp server

A hybrid distributed virtual environment （DVE） architecture is presented by importing a peer-to-peer （P2P） idea into the traditional client/server （C/S） architecture to improve the DVE system＇s scalability. The mathematical model of the overload of the center server was built and a series of simulation experiments were performed to validate the conclusions. When the client number increases to a certain value, the hybrid architecture can reduce server overload with some special clients （temp servers） selected with a certain heuristic strategy. With this architecture, the DVE system can support more system clients with the same server hardware than the C/S architecture can. The server overload ＂pulse＂ phenomena causing by the exiting of the temp server can be resolved by adopting a more optimized temp server selecting strategy and by reducing the child client capability of the temp server. By combining the advantages of the C/S architecture and the P2P architecture, the hybrid DVE architecture can effectively improve the scalability of the DVE system. This is validated by theoretical analysis and simulation experiments.

Effect of drying environment on engineering properties of an expansive soil and its microstructure

This paper investigates the effect of drying environment, i.e. temperature and relative humidity, on the engineering properties and microscopic pore size distribution of an expansive soil. The shrinkage tests under different drying temperatures and relative humidity are carried out in a constant climate chamber. Then, the undisturbed samples, prepared in different drying environment, are used for the triaxial tests and mercury intrusion tests. It is found that the drying environment has noticeable influence on the engineering properties of expansive soils and it can be characterized by the drying rate. The linear shrinkage and strength increase with the decrease of the drying rate. The non-uniform deformation tends to happen in the high drying rate, which subsequently furthers the development of cracks. In addition, during the drying process, the variation of pores mainly focuses on the inter-aggregate pores and inter-particle pores. The lower drying rate leads to larger variation of pore size distribution.

Analysis of the negative effects of groundwater exploitation on geological environment in Asia

This paper summarizes the negative effects on geological environment caused by groundwater exploitation and its distribution. There are seven main types of the geological environment negative effects, which are generally as follows:(1) Constant decrease of groundwater level is mainly distributed in China(East Asia), India(South Asia), Tajikistan(Central Asia) and Saudi Arabia(West Asia);(2) land subsidence occurs mainly in eastern plains of East Asia and west Siberian Plain of North Asia;(3) seawater intrusion occurs mainly in China, Japan and South Korea in East Asia, Philippines and Indonesia in Southeast Asia, the Indian coastal areas in South Asia;(4) groundwater level decline caused by groundwater exploitation in oil fields;(5) mining collapse is mainly in 50° to 70° north latitude band;(6) the total area of karst collapse in China of East Asia is as much as 197.05 km^2; and(7) ground fracture is mainly distributed in the North China Plain, Fenwei Plain and the Yangtze River Delta. Asia can be divided into 6 zones in terms of the geological environment negative effect caused by groundwater exploitation. According to analysis, with the increasing intensity of human activities, geological environment issues become more and more serious, therefore it is vital to control the human activities within the scope of 5× 10~5 people/km^2 to 9.9× 10~5 people/km^2 for the effective control of the size of the affected area by geological environment problems.

Distributed sound source localization algorithm with sound velocity calibration in windy environments

A new sound source localization method with sound speed compensation is proposed to reduce the wind influence on the performance of conventional TDOA （Time Difference of Arrival） algorithms. First, the sound speed is described as a set of functions of the unknown source location, to approximate the acoustic velocity field distribution in the wind field. Then, they are introduced into the TDOA algorithm, to construct nonlinear equations. Finally, the particle swarm optimization algorithm is used to estimate the source location. The simulation results show that the proposed algorithm can significantly improve the localization accuracy for different wind velocities, source locations and test area sizes. The experimental results show that the proposed method can reduce localization errors to about 40% of the original error in a four nodes localization system.

Research on Networked Rapid Product Development Process

Today the cycle time of the product develop is requ ir ed to be shortened. At the same time the requirement of the customers becomes mo re and more diverse and complex. The capability of the develop unit is limited b ecause of the existence of heterogeneous systems and distributed environments. I n this paper, we bring forward a new approach to solve the problem in product de velopment process. We also settle part key technologies in it. A great deal of information from all kinds of sources in the distributed develop ment process is interweaved. The solution to organize the workflow and manage th e information in the process is called for anxiously. We use a new approach that is asynchronous and synchronous coupling product development approach based on the network. The approach extends the develop process from the time axis. Then t he activities in the process are organized from the asynchronous and synchronous aspects. The state of every activity projects at the ASN (active semantic netwo rk). The ASN includes decision system, intelligent agent, user interface and net work. The ASN decides the types and states of the activities and deals with the couple relationship among them. The knowledge stored in ASN is open to all users through the relative interfaces. Every specialist keeps contact with their user s relying on collaborative platform implements CSCW (computer support collaborat ive work) that integrated product/process design and development. The lack of gl obal communication in product development process can be prevented in the most d egree. The key technologies that exist in the asynchronous and synchronous coupling pro duct develop approach include: integrated development structure, orderly organiz ation of information, transparent management of process, agile transfer of infor mation and rapid prototype. The development process can be completed quickly by these technologies. The technologies involve wide content. In this paper, we dis cuss some key technologies. We validate the approach by the projectrapid response manufacturing a pplication in the distributed environment. The expensive device, high technology and low using lead to RE (Rapid engineering) and RP (Rapid prototype) service a pplication by the network. RE and RP develop rapidly due to the accelerated prod uct development process. RE and RP application service platform is built in the project.

Maintaining Consistency Based on Timely Updating Records List in Workflow Data

In order to settle the problem of workflow data consis-tency under the distributed environment, an invalidation strategy based-on timely updating record list is put forward. The strategy adopting the method of updating the records list and the recovery mechanism of updating message proves the classical invalidation strategy. When the request cycle of duplication is too long, the strategy uses the method of updating the records list to pause for sending updating message; when the long cycle duplication is requested again, it uses the recovery mechanism to resume the updating message. This strategy not only ensures the consistency of the workflow data, but also reduces the unnecessary network traffic. From theoretical comparison with those common strategies, the unnecessary network traffic of this strategy is fewer and more stable. The simulation results validate this conclusion.

Research Progress of Trust Evaluation Model

Software systems in distributed environment are changing from a close and relatively static form, whose users are familiar with each other, to an open and highly dynamic mode, which can be visited by public. In such circumstance, trust evaluation model becomes focus of intense research at current time. Trust evaluation model establishes a management framework of trust relationship between entities, involving expression and measurement of trust, comprehensive calculation of direct trust value and recommended trust value, and recognition of malicious entities and recommendations. Based on the analysis of several typical trust evaluation models, the classification of trust evaluation ideas and modes is discussed, the questions existing in current research and the directions of future research are pointed out.