Spatial and Temporal Distribution Characteristics of Snowstorm in Ulanqab City in Recent 30 Years

Based on the data of daily snowfall and weather phenomena of 11 national meteorological stations in Ulanqab City from 1991 to 2020,the spatial and temporal distribution characteristics of snowstorm were analyzed.The results show that the snowstorm in Ulanqab had obvious seasonal distribution characteristics,mainly happening in spring(March-May)and autumn(September-November).It also had obvious regional distribution in space,and the snowstorm center appeared in Chahar Right Wing Middle Banner and Jining District,namely the east side of the Yinshan Mountain.In the past 30 years,the amount of snowstorm in the whole year in Ulanqab showed a certain fluctuation trend,and the number of snowstorm days had shown an obvious upward trend since 2011.

Study on concentration distribution and detonation characteristics for non-axisymmetric fuel dispersal

The study of non-axisymmetric fuel dispersal and detonation can provide reference for the prevention of industrial cloud explosion accidents and the design of fuel air explosive(FAE).The concentration and detonation fields of 85 kg cylindrical and fan-shaped fuel are investigated by experiments and numerical simulations.A dynamic model of the whole process for fuel dispersal and detonation is built.The concentration distribution of fuel is used as the initial condition to calculate the detonation stage,thus solving the initial value problem of detonation field.The phase and component changes of fuel cloud at different locations are compared.The fuel cloud is divided into directions of 0°,90°,135°and 180°.The results show that the maximum cloud radius is 20.94 m in 135°and the minimum is 12.04 m in 0°.The diameter of the detonation fireball is 53.6 m,and the peak temperature is 3455 K.The highest peak overpressure is 3.44 MPa in 0°and the lowest is 2.97 MPa in 135°.The proportion of liquid phase in 0°is22.90%,and the fuel loss is 11.8% and 9% higher than that in 135°and cylindrical charge,respectively.The stable propagation distance of blast wave in 135°is 42.50% longer than 0°and 28.37% longer than cylindrical charge.

Characteristics and distribution of microstructures in high pressure die cast alloys with X-ray microtomography:A review

Al and Mg alloy high pressure die castings(HPDC)are increasingly used in automotive industries.The microstructures in the castings have decisive effect on the casting mechanical properties,in which the microstructure characteristics are fundamental for the investigation of the microstructure-property relation.During the past decade,the microstructure characteristics of HPDC Al and Mg alloys,especially micro-pores andα-Fe,have been investigated from two-dimensional(2D)to threedimensional with X-ray micro-computed tomography(μ-CT).This paper provides an overview of the current understanding regarding the 3D characteristics and formation mechanisms of microstructures in HPDC alloys,their spatial distributions,and the impact on mechanical properties.Additionally,it outlines future research directions for the formation and control of heterogeneous microstructures in HPDC alloys.

Effect of droplet characteristics on liquid-phase distribution in spray zone of internal mixing air-mist nozzle

In continuous casting production,droplet characteristics are important parameters for evaluating the nozzle atomization quality,and have a significant impact on the secondary cooling effect and the slab quality.In order to study the behavior of atomized droplets after reaching the slab surface and to optimize the spray cooling effect,the influence of droplet diameter and droplet velocity on the migration behavior of droplets in the secondary cooling zone was analyzed by FLUENT software.Results show that the droplets in the spray zone and on the slab surface are mainly concentrated in the center,thus,the liquid volume fraction in the center is higher than that of either side.As the droplet diameter increases,the region of high liquid volume fraction on the slab surface becomes wider,and the liquid phase distribution in the slab width direction becomes uneven.Although increasing the droplet velocity at the nozzle exit has little effect on droplet diffusion in the spray zone,the distribution becomes more uneven due to more liquid reaches the slab surface per unit time.A prediction formula of the maximum water flow rate on the slab surface for specific droplet characteristics was proposed based on dimensionless analysis and validated by simulated data.A nozzle spacing of 210 mm was recommended under the working conditions in this study,which ensures effective coverage of the spray water over the slab surface and enhances the distribution uniformity of water flow rate in the transverse direction.

Probability Distribution Characteristics of Strong Nonlinear Waves Under Typhoon Conditions in the Northern South China Sea

The generation and propagation mechanism of strong nonlinear waves in the South China Sea is an essential research area. In this study, the third-generation wave model WAVEWATCH Ⅲ is employed to simulate wave fields under extreme sea states. The model, integrating the ST6 source term, is validated against observed data, demonstrating its credibility. The spatial distribution of the occurrence probability of strong nonlinear waves during typhoons is shown, and the waves in the straits and the northeastern part of the South China Sea show strong nonlinear characteristics. The high-order spectral model HOS-ocean is employed to simulate the random wave surface series beneath five different platform areas. The waves during the typhoon exhibit strong nonlinear characteristics, and freak waves exist. The space-varying probability model is established to describe the short-term probability distribution of nonlinear wave series. The exceedance probability distributions of the wave surface beneath different platform areas are compared and analyzed. The results show that with an increase in the platform area, the probability of a strong nonlinear wave beneath the platform increases.

Spatial and Temporal Distribution Characteristics of Solar Energy Resources in Tibet

The Tibet Plateau is one of the regions with the richest solar energy resources in the world.In the process of achieving carbon neutrality in China,the development and utilization of solar energy resources in the region will play an important role.In this study,the gridded solar resource data with 1km resolution in Tibet were obtained by spatial correction and downscaling of SMARTS model.On this basis,the spatial and temporal distribution characteristics of solar energy resources in the region in the past 30 years(1991–2020)are finely evaluated,and the annual global horizontal radiation resource is calculated.The results show that:1)The average annual global horizontal radiation amount in Tibet is 1816 kWh/m^(2).More than 60%of the area belongs to the“Most abundant”(GHI≥1750 kWh/m^(2))area of China’s solar energy resources category A,and nearly 40%belongs to the“Quite abundant”(1400≤GHI<1750)area of China’s solar energy resource category B.2)In space,the solar energy resources in Tibet increased gradually from north to south and from east to west.Lhasa,Central and Eastern Shigatse,Shannan,and Southwestern Ali are the most abundant cities,with a maximum annual radiation level of 2189 kWh/m2.3)In terms of time,the total horizontal radiation in Tibet was the highest in May and the lowest in December.74%of the total area belongs to the“Very stable”(R_(w)≥0.47)area of solar resource stability category A,and 26%belongs to the“stable”(0.36≤R_(w)<0.47)area of solar resource stability category B.Solar energy resources in the region show the characteristics of both strong and stable.Average solar energy resources in the region have shown a fluctuating downward trend over the past 30 years,with an average decline of about 12.86(kWh/m2)per decade.4)In terms of solar radiation resources reaching the earth’s surface,the theoretical total amount of annual horizontal radiation in Tibet is about 240.07 billion tons of standard coal or 222.91 billion kilowatts on average.

Spatial distribution characteristics and influence factor analysis of landslides——case study of the Hanwang area in Qinba Mountains

The geological hazards of landslides in Hanwang Town, Ziyang County, Ankang City, Shaanxi Province, have emerged. Yet, the current understanding of the spatial distribution characteristics and influencing factors of landslides in this area remains unclear. Combining the results of remote sensing interpretation and field investigation, seven influencing factors, namely, elevation, slope direction, slope gradient, distance from rivers, distance from faults, engineering geologic lithology, and distance from roads, are selected for the study. The distribution characteristics of landslides in each influencing factor and the influence of the resolution of the Digital Elevation Model(DEM) on the results are statistically and analytically analyzed. Furthermore, two highrisk landslides within the study area were subjected to comprehensive analysis, integrating the findings from drilling and other field investigations in order to examine their deformation mechanisms. Based on this analysis,the following conclusions were derived:(1) 34 landslides in the study area, mainly small earth landslides, with a distribution density of 0.42/km~2, threatening 414 people and property of about 55.87 million Yuan.(2)The landslides in the study area easily occur in the <400 m elevation range;the landslides are developed in all slope directions, the gradient is mainly concentrated in the range of 10°–40°, the distribution density of the landslides is higher in the closer distance from the river and the faults(0–200 m), the landslide-prone strata are mainly the softer and weaker metamorphic rocks, and the landslides are mainly around roads.(3) The resolution of the DEM should be selected based on the specific conditions of the study area, the requirements of the investigation, and the scale of the landslide. Opting for an appropriate DEM resolution is advantageous for understanding the patterns of landslides and conducting risk assessments in the region.(4) The Zhengjiabian landslide is a traction Landslide. The landslide body is a binary structure of gravel soil and slate weathering layer, and the damage process can be divided into three stages:(1)damage to the leading edge and stress release,(2)continuous creep and cracking,(3)rainfall infiltration and damage. The predominant slope material in the Brickyard landslide comprises clay, and the landslide is triggered by a combination of the traction effect resulting from the excavation at the slope's base and the nudging effect caused by the stacking load of the brick factory. Additionally, the Brickyard landslide exhibits persistent creep deformation. The study results provide a scientific basis for disaster prevention and mitigation in the Hanwang Township area.

The Spatiotemporal Distribution Characteristics of Cloud Types and Phases in the Arctic Based on CloudSat and CALIPSO Cloud Classification Products

The cloud type product 2B-CLDCLASS-LIDAR based on CloudSat and CALIPSO from June 2006 to May 2017 is used to examine the temporal and spatial distribution characteristics and interannual variability of eight cloud types(high cloud, altostratus, altocumulus, stratus, stratocumulus, cumulus, nimbostratus, and deep convection) and three phases(ice,mixed, and water) in the Arctic. Possible reasons for the observed interannual variability are also discussed. The main conclusions are as follows:(1) More water clouds occur on the Atlantic side, and more ice clouds occur over continents.(2)The average spatial and seasonal distributions of cloud types show three patterns: high clouds and most cumuliform clouds are concentrated in low-latitude locations and peak in summer;altostratus and nimbostratus are concentrated over and around continents and are less abundant in summer;stratocumulus and stratus are concentrated near the inner Arctic and peak during spring and autumn.(3) Regional averaged interannual frequencies of ice clouds and altostratus clouds significantly decrease, while those of water clouds, altocumulus, and cumulus clouds increase significantly.(4) Significant features of the linear trends of cloud frequencies are mainly located over ocean areas.(5) The monthly water cloud frequency anomalies are positively correlated with air temperature in most of the troposphere, while those for ice clouds are negatively correlated.(6) The decrease in altostratus clouds is associated with the weakening of the Arctic front due to Arctic warming, while increased water vapor transport into the Arctic and higher atmospheric instability lead to more cumulus and altocumulus clouds.

Remaining oil distribution characteristics in an oil reservoir with ultra-high water-cut

An accurate mapping and understanding of remaining oil distribution is very important for water control and stabilize oil production of mature oilfields in ultra-high water-cut stage.Currently,the Tuo-21 Fault Block of the Shengtuo Oilfield has entered the stage of ultra-high water cut(97.2%).Poor adaptability of the well pattern,ineffective water injection cycle and low efficiency of engineering measures(such as workover,re-perforation and utilization of high-capacity pumps)are the significant problems in the ultra-high water-cut reservoir.In order to accurately describe the oil and water flow characteristics,relative permeability curves at high water injection multiple(injected pore volume)and a semiquantitative method is applied to perform fine reservoir simulation of the Sand group 3e7 in the Block.An accurate reservoir model is built and history matching is performed.The distribution characteristics of remaining oil in lateral and vertical directions are quantitatively simulated and analyzed.The results show that the numerical simulation considering relative permeability at high injection multiple can reflect truly the remaining oil distribution characteristics after water flooding in an ultrahigh water-cut stage.The distribution of remaining oil saturation can be mapped more accurately and quantitatively by using the‘four-points and five-types’classification method,providing a basis for potential tapping of various remaining oil types of oil reservoirs in late-stage of development with high water-cut.

Spatial Morphology Evolution Characteristics Analysis of the Resident Population Distribution in Henan, China

The population spatial distribution pattern and its evolving pattern play an important role in regional allocation of social resources and production factors, formulation of regional development plans, construction of a better life society, and promotion of regional economic development. Based on the resident population statistics data of Henan province from 2006 to 2021, with county as the basic study unit, the paper studies the spatial morphology characteristics and its evolution patterns of resident population distribution, by using spatial analysis methods such as population distribution center, standard deviation ellipse, and spatial auto correlation analysis. The results show that: the resident population spatial distribution shows unbalanced state, the population agglomeration areas mainly distribute in the northeast part and north part, where the resident population growth rate is significantly higher than other regions, over time, this trend is gradually becoming significant. The resident population distribution has a trend of centripetal concentration, with the degree and trend of centripetal gradually strengthening. The resident population distribution has obvious directional characteristics, but the significance is not high, the weighted resident population average center is approximately located at (4.13740˚N, 113.8935˚E), and the azimuth of the distribution axis is approximately 11.19˚. The population distribution has obvious agglomeration characteristics, with the built-up areas of Zhengzhou and Luoyang as their centers, where have a significant siphon effect on the surrounding population. The southern and southwestern regions in the province form a relatively stable belt area of Low-Low agglomeration areas.

Species and Distribution Characteristics of Alien Invasive Plants in Garden Greenbelt of Shijiazhuang City

[Objectives]The paper was to investigate the garden greenbelt in 30 sample plots such as parks,roads,communities,etc.in Shijiazhuang City.[Methods]The species,abundance and frequency of weeds in the greenbelt of public gardens were recorded through point-line-surface investigation,and typical plants were sampled.[Results]There were 56 species of alien invasive plants in garden greenbelts of Shijiazhuang City,belonging to 44 genera and 20 families.In terms of life form,herbaceous plants were absolutely dominant,accounting for 92.8%of the total.The most alien invasive plants were native to America,accounting for 66.1%of the total.In terms of introduction path,the plants introduced artificially and unintentionally accounted for almost half.The species and quantity of alien invasive plants were related to the size of greenbelt area,the length of the build time of the surveyed plot,the composition structure of greenbelt and the level of green management and protection.There was larger distribution of alien invasive plants in the sample plots with large greenbelt area,long build time,herbaceous-dominated greenbelt and low level of green management and protection.Among the 56 alien invasive plants,3 plants were toxic.From the perspective of invasiveness,the alien invasive plants in the garden greenbelt of Shijiazhuang City could be divided into 5 levels:invasive alien species of malignant consequences,invasive alien species of severe consequences,invasive alien species of partial consequences,invasive alien species of average consequences,and invasive alien species to be observed.[Conclusions]This study will provide a reference for the prevention and control of alien plant invasion,and lay a foundation for the prevention and control of existing invasive plants.

Distribution Characteristics and Shielding Effects of Ion Clouds

The latest research shows that the ions generated by the corona discharge of lightning rod have dual functions of attracting and shielding lightning discharge. After the lightning rod is installed at a certain height on the ground,the lightning rod tip reaches the corona threshold to ionize the surrounding air and generate positive and negative ions under the action of the electric field at the end of the lightning downward leader. Constrained by Coulomb’s Law,its positive ions( opposite charges attract each other) form an upward leader( streamer),which moves towards the end of the lightning downward leader and is connected to the downward leader,establishing a discharge channel to attract lightning to the needle tip and discharge the current to the ground,and playing a role in attracting lightning. Its negative ions are repelled by the electric field at the end of the lightning downward leader( repelled by isotropic charges) and influenced by the wind,and diffuse in the downwind area to form an ion cloud,inhibiting the growth of corona at the tip of ground objects,and playing a role in shielding lightning. In this paper,Franklin’s understanding of the role of lightning rod and Yang Shaojie’s new definition of the working principle of lightning rod are briefly introduced. The formation mechanism,distribution characteristics,shielding effect,and impact on lightning strike point distribution of ion clouds are analyzed. Additionally,the important role of shielding effects of ion clouds in regional lightning protection is introduced,which provides a theoretical basis for the correct understanding and use of lightning rod.

Epidemiological Characteristics and Spatiotemporal Distribution Patterns of Human Norovirus Outbreaks in China, 2012–2018

Objective To clarify the epidemiological characteristics and spatial distribution patterns of human norovirus outbreaks in China, identify high-risk areas, and provide guidance for epidemic prevention and control.Methods This study analyzed 964 human norovirus outbreaks involving 50,548 cases in 26 provinces reported from 2012 to 2018. Epidemiological analysis and spatiotemporal scanning analysis were conducted to analyze the distribution of norovirus outbreaks in China.Results The outbreaks showed typical seasonality, with more outbreaks in winter and fewer in summer, and the total number of infected cases increased over time. Schools, especially middle schools and primary schools, are the most common settings of norovirus outbreaks, with the major transmission route being life contact. More outbreaks occurred in southeast coastal areas in China and showed significant spatial aggregation. The highly clustered areas of norovirus outbreaks have expanded northeast over time.Conclusion By identifying the epidemiological characteristics and high-risk areas of norovirus outbreaks, this study provides important scientific support for the development of preventive and control measures for norovirus outbreaks, which is conducive to the administrative management of high-risk settings and reduction of disease burden in susceptible areas.

Enrichment conditions and distribution characteristics of lacustrine medium-to-high maturity shale oil in China

Successful breakthroughs have been made in shale oil exploration in several lacustrine basins in China,indicating a promising future for shale oil exploration and production.Current exploration results have revealed the following major conditions of lacustrine shale oil accumulation:(1)stable and widely distributed shale with a high organic abundance and appropriate thermal maturity acts as a fundamental basis for shale oil retention.This shale exhibits several critical parameters,such as total organic carbon content greater than 2%,with optimal values ranging from 3% to 4%,kerogen Ⅰ and Ⅱ_(1) as the dominant organic matter types,and vitrinite reflectance(R_(o))values greater than 0.9%(0.8% for brackish water environments).(2)Various types of reservoirs exhibiting brittleness and a certain volume of micro-nanoscale pores are critical conditions for shale oil accumulation,and these reservoirs have porosities greater than 3% to 6%.Moreover,when diagenesis is incipient,pure shales are not favorable for medium-to-high maturity shale oil enrichment,whereas tight sandstone and hybrid rocks with clay content less than 20% are favorable;however,for medium-to-late-stage diagenesis,pure shales with a clay content of 40% are favorable.(3)The retention of a large amount of high-quality hydrocarbons is the factor that best guarantees shale oil accumulation with good mobility.Free hydrocarbon content exceeding a threshold value of 2 mg/g is generally required,and the optimum value is 4 mg/g to 6 mg/g.Moreover,a gas-oil ratio exceeding a threshold value of 80 m^(3)/m^(3) is required,with the optimal value ranging from 150 m^(3)/m^(3) to 300 m^(3)/m^(3).(4)High-quality roof and floor sealing conditions are essential for the shale oil enrichment interval to maintain the overpressure and retain a sufficient amount of hydrocarbons with good quality.Lacustrine shale oil distributions exhibit the following characteristics:(1)major enrichment areas of shale oil are located in semi-deep to deep lacustrine depositional areas with external materials,such as volcanic ash fallout,hydrothermal solutions,and radioactive substances with catalytic action,as inputs;(2)intervals with“four high values and one preservation condition”govern the distribution of shale oil enrichment intervals;and(3)favorable assemblages of lithofacies/lithologies determine the distribution of enrichment area.According to preliminary estimates,China has 131×10^(8) to 163×10^(8) t of total shale oil resources with medium-to-high thermal maturity,among which 67×10^(8) to 84×10^(8) t is commercial.These resources are primarily located in the Chang 7^(1+2) interval in the Ordos Basin,Qing 1+2 members in Gulong sag in the Songliao Basin,Kongdian and Shahejie formations of Cangdong sag,Qikou sag and the Jiyang depression in the Bohai Bay Basin,and Lucaogou Formation in the Junggar Basin.

Study on Distribution Characteristics and Occurrence Form of Soil Fluorine in Sorghum Base of Renhuai City

In order to find out the effects of soil fluorine on ecological environment and crop safety in the sorghum cultivation base of Renhuai City, Guizhou Province, the content and the occurrence forms of soil fluorine and its influencing factors of Maoba Town were investigated and studied. The results showed that the total fluorine content in the soil of the sorghum base ranged from 668.60 to 2 596.80 mg/kg, with an average of 1 483.25 mg/kg, which was 3.10 and 1.85 times of the national soil background value and the average value of the soil in endemic areas, respectively. The spatial distribution of fluorine in the soil of the study area was uneven, and the fluorine content was in the order of Anliang Village>Yangliu Village>Houba Village>Xiongfeng Village. The soil fluorine contents of various forms varied greatly, and the distribution law was as follows: residual state>water soluble state>organically bound state>exchangeable state>Fe/Mn-F state. The residual fluorine content was the highest, accounting for more than 99% of total fluorine content, while the sum of other four forms was less than 1%, with their respective proportions ranging from 0.10% to 0.30%. The content and proportion of available fluorine in water-soluble and exchangeable states were relatively low, which had limited influence on the surrounding water environment and crop safety. The physicochemical properties of soil, such as pH, organic matter, cation exchange capacity and clay particles had a certain influence on the occurrence forms of soil fluorine, thus changing the availability and migration of soil fluorine, which might endanger the ecological environment safety, food safety and human health.

Statistical Characteristics of Raindrop Size Distribution in the South China Monsoon Region(Guangdong Province)

While heavy rainfall frequently takes place in southern China during summer monsoon seasons,quantitative precipitation forecast skills are relatively poor.Therefore,detailed knowledge about the raindrop size distribution(DSD)is useful in improving the quantitative precipitation estimation and forecast.Based on the data during 2018-2022 from 86stations in a ground-based optical disdrometer measurement network,the characteristics of the DSD in Guangdong province are investigated in terms of the particle size distribution(N(D)),mass-weighted mean diameter(Dm) and other integral DSD parameters such as radar reflectivity(Z),rainfall rate(R) and liquid water content(LWC).In addition,the effects of geographical locations,weather systems(tropical cyclones,frontal systems and the summer monsoon) and precipitation types on DSD characteristics are also considered.The results are shown as follows.1) Convective precipitation has a broader N(D) and larger mean particle diameter than the stratiform precipitation,and the DSD observations in Guangdong are consistent with the three-parameter gamma distribution.The relationships between the Z and R for stratiform and convective precipitation are also derived for the province,i.e.,Z=332.34 R1.32and Z=366.26R1.42which is distinctly different from that of the Next-generation Weather Radar(NEXRAD) Z-R relationship in United States.2) In the rainy season(April-September),the Dm, R and LWC are larger than those in the dry season(OctoberMarch).Moreover the above parameters are larger,especially in mid-May,which is the onset of the South China Sea summer monsoon.3) The spatial analysis of DSD shows that the coastal station observations indicate a smaller Dmand a larger normalized intercept parameter(log10Nw),suggestive of maritime-like rainfall.Dmis larger and log10Nwis smaller in the inland area,suggestive of continental-like rainfall.4) Affected by such weather systems as the tropical cyclone,frontal system and summer monsoon,the DSD shows characteristics with distinct differences.Furthermore,frontal system rainfall tends to present a continental-like rainfall,tropical cyclone rainfall tends to have a maritime-like rainfall,and summer monsoon rainfall characteristic are between maritime-and continental-like cluster(raindrop concentration and diameter are higher than continental cluster and maritime cluster,respectively.)

Sediment yield and erosion–deposition distribution characteristics in ephemeral gullies in black soil areas under geocell protection

Investigating the effect of geocells on the erosion and deposition distribution of ephemeral gullies in the black soil area of Northeast China can provide a scientific basis for the allocation of soil and water conservation measures in ephemeral gullies.In this study,an artificial simulated confluence test and stereoscopic photogrammetry were used to analyze the distribution characteristics of erosion and deposition in ephemeral gullies protected by geocells and the effect of different confluence flows on the erosion process of ephemeral gullies.Results showed that when the confluence flow was larger,the effect of geocell was more evident,and the protection against ephemeral gully erosion was stronger.When the confluence flow rates were 0.6,1.8,2.4,and 3.0 m^(3)/h,ephemeral gully erosion decreased by 37.84%,26.09%,21.40%,and 35.45%.When the confluence flow rates were 2.4 and 3.0 m^(3)/h,the average sediment yield rate of the ephemeral gully was close to 2.14 kg/(m^(2)•min),and the protective effect of ephemeral gully erosion was enhanced.When the flow rate was higher,the surface fracture of the ephemeral gully was more serious.With an increase in confluence flow rate,the ratio of erosion to deposition increased gradually,the erosion area of ephemeral gullies was expanded,and erosion depth changed minimally.In conclusion,geocell measures changed erosion patterns by altering the rill erosion/deposition ratio,converting erosion from rill erosion to sheet erosion.

Numerical analysis of the effects of vesicle distribution characteristics on the engineering properties of volcanic rocks

Vesicles can be of different sizes and shapes and can be randomly distributed within vesicular volcanic rocks. This study investigates the variation of engineering properties of vesicular rocks due to the changes in vesicle distribution characteristics for different cases of bulk porosity and vesicle diameter using a systematic numerical simulation program using the finite element method-based rock failure process analysis (RFPA) software. Models with uniform-size vesicles and combinations of different proportions of different-sized vesicles were considered to resemble natural vesicular rocks more closely, and ten different random vesicle distributions were tested for each case. Increasing bulk porosity decreased the uniaxial compressive strength (UCS) and elastic modulus of the specimens, and the specimens with the lowest bulk porosity showed the greatest range of UCS values in the case of uniform-size vesicles. The effect of vesicle diameter on UCS showed an unsystematic response which was understood to be a result of different vesicle distribution patterns, some of which facilitated a shear failure. Specimens with multiple-size vesicles in different proportions revealed that the variation of UCS due to vesicle distribution characteristics is minimum when the bulk porosity is equally shared by different size vesicles. In addition, when the proportion of smaller-sized vesicles is higher, UCS showed an increase compared to that of the equal proportion of different size vesicles case at low porosities, but a decrease at higher porosities. Variation of elastic modulus showed minor, unsystematic fluctuations as a function of vesicle diameter and different proportions of different-sized vesicles, and the range for different vesicle distribution patterns was narrow in general. Overall, the findings of this study recommend cautious use of the engineering properties determined through a limited number of laboratory tests on vesicular rocks.

Distribution,abundance,and realized niches of meroplankton by two different mesh size nets during spring 2017 in the Southern Yellow Sea,China

Meroplankton play a crucial role in both benthic and pelagic ecosystems.Existing quantitative research on estimating the quantities of meroplankton groups is both underrepresented and inaccurate.To investigate and evaluate the influence of varying mesh sizes(505 and 160μm)on the sampling efficiency of meroplankton,we conducted an examination using two commonly used plankton nets during the spring season in the Southern Yellow Sea(SYS).Our study revealed a total of 12 meroplankton groups,with 9 groups identified in the 505-μm mesh nets and 11 groups in the 160-μm mesh nets.The results demonstrated the superior collection efficiency of the 160-μm net compared to the 505-μm net across the majority of meroplankton groups.Furthermore,we focused on exploring the abundance,distribution patterns,and realized niches of meroplankton collected by the two mesh size nets,and observed that the distribution of meroplankton closely resembled the distribution of possible benthic adults in the SYS.Correlation analysis of the six dominant groups collected in the 160-μm mesh nets revealed that seawater temperature and salinity emerged as the key environmental factors driving variations in meroplankton abundance within the SYS.This study also found that a smaller mesh size net does not necessarily capture meroplankton more comprehensively.A comprehensive understanding of the ecological characteristics of meroplankton requires the combination of two types of nets for research.Our research significantly advances our understanding of the quantification,abundance,and distribution of meroplankton,serving as a valuable contribution to the broader landscape of detailed quantitative meroplankton studies.

The abundance,distribution,and enrichment mechanism of harmful trace elements in coals from Guizhou,Southwestern China

Coal seams can enrich a variety of harmful trace elements under specific geological conditions.The spatial distribution of harmful trace elements in coal is extremely uneven,and the distribution characteristics of each element content are different.The harmful elements released in the process of coal mining and utilization will cause serious harm to the environment and the human body.It is of great resource significance to study the geochemistry of coal that affects the enrichment and distribution characteristics of harmful trace elements.Based on the domestic and foreign literature on coal geochemistry in Guizhou published by previous investigators,this study counted 1097 sample data from 23 major coal-producing counties in Guizhou Province,systematically summarized the relevant research results of harmful trace elements in the coal of Guizhou,and revealed the overall distribution and enrichment characteristics of harmful trace elements in the coal of Guizhou.The results show that the average contents of Cd,Pb,Se,Cu,Mo,U,V,As,Hg,and Cr in coal of Guizhou are higher than those in Chinese coal and world coal.A variety of harmful trace elements in the coal of Guizhou have high background values,especially in Liupanshui,Xingyi and Qianbei coalfield.The enrichment of various harmful trace elements in the Late Permian coal in Guizhou is mainly related to the combined action of various geological and geochemical factors.The supply of terrigenous debris and sedimentary environment may be the basic background of the enrichment of harmful elements in western Guizhou,while low-temperature hydrothermal activity and volcanic ash deposition may be the main reasons for the enrichment of harmful elements in southwestern Guizhou.