GAS AND OIL POWER DISTRIBUTION RATIO OF A NEW HYDRAULIC BREAKER

The working principle of a new hydraulic breaker operated jointly by gas and hydraulic flow which has a reasonable structure, high efficiency and long piston life-span, is analyzed, and the optimal power distribution ratio of the sealed nitrogen gas to the high-pressure oil in the process of piston impacting is studied. Through theoretical analysis, optimization simulation and detailed calculation, it is determined that the impact system has optimal mechanical performance and highest efficiency when the distribution ratio φ is between 0.3 and 0.5. The theoretical result is also verified by repeated tests.

Red cell distribution width/platelet ratio estimates the 3-year risk of decompensation in Metabolic Dysfunction-Associated Steatotic Liver Disease-induced cirrhosis

BACKGROUND For compensated advanced chronic liver disease(cACLD)patients,the first decompensation represents a dramatically worsening prognostic event.Based on the first decompensation event(DE),the transition to decompensated advanced chronic liver disease(dACLD)can occur through two modalities referred to as acute decompensation(AD)and non-AD(NAD),respectively.Clinically Significant Portal Hypertension(CSPH)is considered the strongest predictor of decompensation in these patients.However,due to its invasiveness and costs,CSPH is almost never evaluated in clinical practice.Therefore,recognizing noninvasively predicting tools still have more appeal across healthcare systems.The red cell distribution width to platelet ratio(RPR)has been reported to be an indicator of hepatic fibrosis in Metabolic Dysfunction-Associated Steatotic Liver Disease(MASLD).However,its predictive role for the decompensation has never been explored.AIM In this observational study,we investigated the clinical usage of RPR in predicting DEs in MASLD-related cACLD patients.METHODS Fourty controls and 150 MASLD-cACLD patients were consecutively enrolled and followed up(FUP)semiannually for 3 years.At baseline,biochemical,clinical,and Liver Stiffness Measurement(LSM),Child-Pugh(CP),Model for End-Stage Liver Disease(MELD),aspartate aminotransferase/platelet count ratio index(APRI),Fibrosis-4(FIB-4),Albumin-Bilirubin(ALBI),ALBI-FIB-4,and RPR were collected.During FUP,DEs(timing and modaities)were recorded.CSPH was assessed at the baseline and on DE occurrence according to the available Clinical Practice Guidelines.RESULTS Of 150 MASLD-related cACLD patients,43(28.6%)progressed to dACLD at a median time of 28.9 months(29 NAD and 14 AD).Baseline RPR values were significantly higher in cACLD in comparison to controls,as well as MELD,CP,APRI,FIB-4,ALBI,ALBI-FIB-4,and LSM in dACLD-progressing compared to cACLD individuals[all P<0.0001,except for FIB-4(P:0.007)and ALBI(P:0.011)].Receiving operator curve analysis revealed RPR>0.472 and>0.894 as the best cut-offs in the prediction respectively of 3-year first DE,as well as its superiority compared to the other non-invasive tools examined.RPR(P:0.02)and the presence of baseline-CSPH(P:0.04)were significantly and independently associated with the DE.Patients presenting baseline-CSPH and RPR>0.472 showed higher risk of decompensation(P:0.0023).CONCLUSION Altogether these findings suggest the RPR as a valid and potentially applicable non-invasive tool in the prediction of timing and modalities of decompensation in MASLD-related cACLD patients.

Distribution ratio of sulfur between high alumina slag and carbonsaturated iron

High alumina slag is widely found in pyrometallurgical extractions of ferronickel,ferrochromium,and platinum group metals.The effects of MgO,Al_(2)O_(3),and CaO/SiO_(2) on the sulfur distribution ratio between high-alumina CaO–SiO_(2)–MgO–Al_(2)O_(3) slag and carbon-saturated iron were investigated.The slag consisted of Al_(2)O_(3) content in the range of 27.61–40.00 wt.%,CaO/SiO_(2) ratio of 0.8–1.1,and MgO content of 8–16 wt.%.The theoretical liquid areas of CaO–SiO_(2)–MgO–Al_(2)O_(3) slag were analyzed through the phase diagrams.The sulfur distribution ratio was measured via the slag–metal equilibrium technique at 1500ºC.It was observed that the sulfur distribution ratio increased with higher MgO content and higher CaO/SiO_(2) ratio largely due to the increase in free O^(2-)ions and the decrease in activity coefficient of sulfur ion in slag,but slightly decreased with the increasing Al_(2)O_(3) content because of the decrease in free O^(2-).

Study on the Effects of Dome Fuel Distribution Ratio on Lean Blowout of a Model Combustor

The experimental studies and numerical simulation were conducted on the effects of the dome fuel distribution ratio on the lean blowout of a model combustor.The experimental results indicate that as the key parameter,the dome fuel distribution ratio,increases from 2.06%to 16.67%,the lean blowout equivalence ratio declines obviously at the beginning,and then the decrease slows down,in addition,the amplitude of the pressure fluctuation in the combustor reduces significantly while the dominant frequency keeps basically constant.In order to analyze the experimental results,the numerical simulation is adopted.The temperature and local equivalence ratio distributions are employed to explain the reason why the lean blowout performance improves with the increase of the dome fuel distribution ratio.

Branching ratio and angular distribution of ejected electrons from Eu 4f^76p_(1/2)nd auto-ionizing states

The branching ratios of ions and the angular distributions of electrons ejected from the Eu 4f^76p_（1/2）nd auto-ionizing states are investigated with the velocity-map-imaging technique.To populate the above auto-ionizing states,the relevant bound Rydberg states have to be detected first.Two new bound Rydberg states are identified in the region between41150 cm^（-1）and 44580 cm^（-1）,from which auto-ionization spectra of the Eu 4f^76p_（1/2）nd states are observed with isolated core excitation method.With all preparations above,the branching ratios from the above auto-ionizing states to different final ionic states and the angular distributions of electrons ejected from these processes are measured systematically.Energy dependence of branching ratios and anisotropy parameters within the auto-ionization spectra are carefully analyzed,followed by a qualitative interpretation.

Red blood cell distribution width derivatives in alcohol-related liver cirrhosis and metabolic-associated fatty liver disease

BACKGROUND Looking for undiscovered blood markers of liver fibrosis and steatosis still remains an issue worth exploring.There are still plenty of unresolved issues related to the actual role of hematological indices as potential markers of liver function.AIM To study red blood cell distribution width(RDW),RDW-to-platelet ratio(RPR)and RDW-to-lymphocyte ratio(RLR) in alcohol-related liver cirrhosis(ALC) and metabolic-associated fatty liver disease(MAFLD).METHODS The study group was composed of 302 people:142 patients with ALC and 92 with MAFLD;68 persons were included as controls.RDW,RPR and RLR were measured in each person.Indirect and direct parameters of liver fibrosis were also assessed [aspartate transaminase to alkaline transaminase ratio,aspartate transaminase to platelet ratio index(APRI),fibrosis-4(FIB-4),gamma-glutamyl transpeptidase to platelet ratio(GPR),procollagen I carboxyterminal propeptide,procollagen Ⅲ aminoterminal propeptide,transforming growth factor-α,plateletderived growth factor AB,laminin].MELD score in ALC patients and nonalcoholic fatty liver disease(NAFLD) fibrosis score together with BARD score were obtained in the MAFLD group.The achieved results were compared to controls.Then a correlation between assessed markers was done.Diagnostic value of each investigated parameter and its suggested cut-off in the research group RESULTS RDW,RPR and RLR values turned out to be significantly higher in ALC and MAFLD groups compared to controls(ALC:P<0.0001;NAFLD:P<0.05,P<0.0001 and P<0.0001,respectively).RPR correlated positively with MELD score(P<0.01) and indirect indices of liver fibrosis(FIB-4 and GPR;P<0.0001) in ALC patients;negative correlations were found between PDGF-AB and both:RDW and RPR(P<0.01 and P<0.0001,respectively).RPR correlated positively with NAFLD fibrosis score and APRI(P<0.0001) in the MAFLD group;a positive relationship was observed between RDW and FIB-4,too(P<0.05).AUC values and suggested cut-offs for RDW,RPR and RLR in ALC patients were:0.912(>14.2%),0.965(>0.075) and 0.914(>8.684),respectively.AUC values and suggested cut-offs for RDW,RPR and RLR in MAFLD patients were:0.606(>12.8%),0.724(>0.047) and 0.691(>6.25),respectively.CONCLUSION RDW with its derivatives appear to be valuable diagnostic markers in patients with ALC.They can also be associated with a deterioration of liver function in this group.

Log Likelihood Ratio-Based Relaying for Distributed Turbo Codes

A distributed turbo codes（ DTC） scheme with log likelihood ratio（ LLR）-based threshold at the relay for a two-hop relay networks is proposed. Different from traditional DTC schemes,the retransmission scheme at the relay,where imperfect decoding occurs,is considered in the proposed scheme. By employing a LLR-based threshold at the relay in the proposed scheme,the reliability of decoder-LLRs can be measured. As a result,only reliable symbols will be forwarded to the destination and a maximum ratio combiner（ MRC） is used to combine signals received from both the source and the relay. In order to obtain the optimal threshold at the relay,an equivalent model of decoderLLRs is investigated,so as to derive the expression of the bit error probability（ BEP） of the proposed scheme under binary phase shift keying（ BPSK） modulation. Simulation results demonstrate that the proposed scheme can effectively mitigate error propagation at the relay and also outperforms other existing methods.

Reduction of chromium oxides in stainless steel dust

The recovery of metal oxides from stainless steel dust using C（graphite）, SiFe, and Al as reductants was investigated under various conditions. The apparent distribution ratio of Cr（L Cr ′^m/s ） in the recovered metal and residual slag phases was defined as the major performance metric. The results show that the recovery ratio of metals increases as the ratio of CaO ：SiO2 by mass in the residual slag increases to 1.17. The residual content of metals in the slag decreases as the Al2O3 content of the slag is increased from approximately 8wt% to 10wt%. The recovery ratio of Cr increases with increasing L Cr ′^ m/s , and a linear relationship between L Cr ′^m/s and the activity coefficient ratio of CrO in the slag and the recovered metal phase is observed. The combination of C and SiFe or Al as the reducing agents reveals that Si is the more effective coreductant.

Denitrogenization from Liquid Steel by Fluxes Treatment

By measuring the solubility of nitrogen in BaO-contained and TiO_2-contained fluxes at 1623K, the nitride capacity and nitrogen distribution ratio were calculated. Both fluxes had high nitride capacity and nitrogen distribution ratio. The results indicated that Both fluxes treatment were available for denitrogenizing steel. The kinetic studies about denitrogenization showed that nitrogen transfer in liquid steel is the controlled step of denitrogenization reaction, so to improve the mass transfer condition in liquid steel could accelerate the rate of denitrogenization. Under proper test conditions, it was proved to be possible to remove nitrogen over 70 percent from steel with TiO_2 contained fluxes.

Cluster planting impact on cotton growth, yield and biomass accumulation in an arid region oasis

The cluster planting pattern （3 plants per hole） for cotton （Gossypium hirsutum L.） may increase economic yield over those of the traditional planting pattern （1 plant per hole） in arid regions of China. This increase in yield depends on either increased biomass production or greater partitioning to fruit. This study was conducted to determine whether differences in biomass accumulation or partitioning to reproductive growth contributed to higher yield in the cluster planting pattern compared with the traditional one. Growth parameters, biomass accumulation, crop growth rate and partitioning between cluster planting pattern and traditional planting pattern was compared in northwest of China. The biomass production and partitioning in cluster planting plot was higher than in traditional planting one. Biomass accumulation was faster early in the clustered treatment, and it was also higher at harvest time. Total dry matter production per unit area was significantly higher than in the traditional planting. On a per plant basis, dry matter accumulation was faster and total biomass production was significantly higher in the cluster planting pattern. Numbers of sympodia and boll sizes were also larger, indicating that facilitation among plants was promoting crop yield. The increase in yield in the cluster planting treatment occurred through increased partitioning of dry matter to fruits than in the traditional planting pattern, resulting in more bolls and increased lint yield in arid regions.

Study on separation of rare earth elements in complex system

The effect of the feed acidity,acetic acid concentration and rare earth concentration on the distribution ratio,separation coefficient and extraction capacity of light rare earth elements were studied in the P204(DEHPA)-HCl system and P507(HEH/EHP)-HCl system both containing acetic acid,respectively. The results showed that the distribution ratio and separation coefficient decreased with increasing of acidity,and increased with increasing of acetic acid concentration and rare earths concentration,and the extraction capacity increased with increasing of acetic acid concentration. When pH value of feed was 2.0,[RE]/[acetic acid] was 1:1 and rare earth concentration 0.35 mol/L,in P204(DEHPA) -HCl system with acetic acid,the maximum separation coefficient(β) reached to βCe /La=4.09,βPr/Ce=1.96 and βNd/Pr=1.53,and the separation ability of this extraction system was better than P507(DEHPA)-HCl system.

Distribution of P2O5 between solid solution and liquid phase in dephosphorization slag of CaO-SiO2-FeO-P2O5-Na2O system

A multi-phase slag containing Na2O is potential to efficiently dephosphorize high-P hot metal.After dephosphorization,the generated slag with high P2O5 content is regarded as a P resource.Because P2O5 was mainly concentrated in the 2CaO SiO2-3CaO P2O5 solid solution,the recovery of P from dephosphorization slag primarily depends on the separation of the solid solution from other phases.The distribution ratios of P2O5 between solid solution and liquid phase in the CaOSiO2-FeO-P2O5-Nslag system were investigated.The results indicated that the addition of Na2O facilitated the enrichment of P2O5 in the solid solution because it increased not only the distribution ratio of P2O5 but also the mass fraction of the solid solution.The distribution ratio of P2O5 was independent of the P2O5 content in slag.A higher P2O5 content in slag resulted in higher P2O5 and Na2O contents in the solid solution.The distribution ratio of P2O5 increased with the total Fe content in the liquid phase,regardless of the valence of Fe.An increase in the FeO content in slag brought a higher P2O5 content in the solid solution.As slag basicity increased,the distribution ratio of P2O5 increased,but the P2O5 content in the solid solution decreased.

Study on separation technology of Pr and Nd in D_2EHPA-HCl-LA coordination extraction system

The separation coefficient of Nd/Pr was lower in D2EHPA-HCl system. Pointing to this problem,the effect of the acidity of feed and the concentration of lactic acid on the distribution ratio,separation coefficient and extraction capacity was investigated in unsaponified D2EHPA-HCl-LA system,and the regression equations were calculated in this paper. The results showed that the distribution ratio and separation coefficient both increased with decreasing of feed acidity and increasing of the lactic acid concentration,and the extraction capacity increased with increasing of lactic acid concentration in D2EHPA-HCl-LA system. When the pH value of the feed was 3.5 and lactic acid concentration was 0.6 mol/L,the max separation coefficient was 1.57,and the extraction capacity was 27.87 g/L.

Discrete element modeling of the effect of particle size distribution on the small strain stiffness of granular soils

Discrete element modeling was used to investigate the effect of particle size distribution on the small strain shear stiffness of granular soils and explore the fundamental mechanism controlling this small strain shear stiffness at the particle level. The results indicate that the mean particle size has a negligible effect on the small strain shear modulus. The observed increase of the shear modulus with increasing particle size is caused by a scale effect. It is suggested that the ratio of sample size to the mean particle size should be larger than 11.5 to avoid this possible scale effect. At the same confining pressure and void ratio, the small strain shear modulus decreases as the coefficient of uniformity of the soil increases. The Poisson＇s ratio decreases with decreasing void ratio and increasing confining pressure instead of being constant as is commonly assumed. Microscopic analyses indicate that the small strain shear stiffness and Poisson＇s ratio depend uniquely on the soil＇s coordination number.

Experimental Study on Deep Desulfurizer in LF Process

CaO-Al2O3-SiO2-CaF2-MgO was selected as the slag system for desulfurization in LF process.The reaction between steel and slag during desulfurization has been simulated by using Factsage software to study the influence of component on the sulfur distribution ratio.In order to research the influence of CaO content,aluminum powder content and its granularity on desulfurization,laboratory experiments have been carried out in a 200 kg inductive furnace.Results showed that the optimal composition of deep desulfurizer is wCaO=64% and aluminium powder 10% with a granularity of 30 μm.Industrial trials showed that the main composition range of final slag in LF process is wCaO=53.0%-57.0%,wAl2O3=23.4%-25.1%,wSiO2=8.1%-10.0%,and wCaF2=3.2%-4.7%.The sulfur mass percent in steel is lower than 0.0008% with a desulfurization rate above 89%.According to the result of industrial production,this desulfurizer could meet the production requirement for ultra-low sulfur steel,of which sulfur mass percent is under 0.0015%