Mesoscopic characteristics of a clayey soil specimen subjected to macroscopic loading are examined using a medi- cal-use computerized tomography (CT) instrument. Disturbed state concept (DSC) theory is based on the ut...Mesoscopic characteristics of a clayey soil specimen subjected to macroscopic loading are examined using a medi- cal-use computerized tomography (CT) instrument. Disturbed state concept (DSC) theory is based on the utilization of the hard- ening model. DSC indirectly describes material behavior by claiming that the actual response of the material is expressed in terms of the relative intact (RI) response and the fully adjusted (FA) response. The occurrence of mesoscopic structural changes of material has similarities with the occurrence of a macroscopic response of the material under loadings. In general, the relative changing value of a softening material is three to five times more than that of a hardening material. Whether special zones exist or not in a specimen cross section does not affect the following conclusion: hardening material and softening material show me- chanical differences with CT statistical indices values prominently changing, and the change is related to the superposing of a disturbance factor. A new disturbance factor evolution function is proposed. Thus, mesoscopic statistical indices are introduced to describe macroscopic behavior through the new evolution function. An application of the new evolution function proves the effectiveness of the amalgamation of a macroscopic and a mesoscopic experimental phenomenon measurement methods.展开更多
The theoretical formulations of Coulomb and Rankine still remain as the fundamental approaches to the analysis of most gravity-type retaining wall,with the assumption that sufficient lateral yield will occur to mobili...The theoretical formulations of Coulomb and Rankine still remain as the fundamental approaches to the analysis of most gravity-type retaining wall,with the assumption that sufficient lateral yield will occur to mobilize fully limited conditions behind the wall.The effects of the magnitude of wall movements and different wall-movement modes are not taken into consideration.The disturbance of backfill is considered to be related to the wall movement under translation mode.On the basis of disturbed state concept(DSC),a general disturbance function was proposed which ranged from-1 to 1.The disturbance variables could be determined from the measured wall movements.A novel approach that related to disturbed degree and the mobilized internal frictional angle of the backfill was also derived.A calculation method benefited from Rankine's theory and the proposed approach was established to predict the magnitude and distribution of earth pressure from the cohesionless backfill under translation mode.The predicted results,including the magnitude and distribution of earth pressure,show good agreement with those of the model test and the finite element method.In addition,the disturbance parameter b was also discussed.展开更多
A unified constitutive modeling approach is highly desirable to characterize a wide range of engineeringmaterials subjected simultaneously to the effect of a number of factors such as elastic, plastic and creepdeforma...A unified constitutive modeling approach is highly desirable to characterize a wide range of engineeringmaterials subjected simultaneously to the effect of a number of factors such as elastic, plastic and creepdeformations, stress path, volume change, microcracking leading to fracture, failure and softening,stiffening, and mechanical and environmental forces. There are hardly available such unified models. Thedisturbed state concept （DSC） is considered to be a unified approach and is able to provide materialcharacterization for almost all of the above factors. This paper presents a description of the DSC, andstatements for determination of parameters based on triaxial, multiaxial and interface tests. Statementsof DSC and validation at the specimen level and at the boundary value problem levels are also presented.An extensive list of publications by the author and others is provided at the end. The DSC is considered tobe a unique and versatile procedure for modeling behaviors of engineering materials and interfaces. 2016 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. This is an open access article under the CC BY-NC-ND license展开更多
Behavior of rockfills was investigated experimentally and theoretically.A series of standard triaxial compression tests were carried out on a quarried rockfill material at different stress levels.It was found that bot...Behavior of rockfills was investigated experimentally and theoretically.A series of standard triaxial compression tests were carried out on a quarried rockfill material at different stress levels.It was found that both the stress level and the shear stress ratio,like most of granular materials,controls the behavior of rockfill materials.At lower shear stress ratios the behavior is much more similar to a nonlinear elastic solid.When the shear stress goes further,the stressstrain curve shows an elasto-plastic behavior which suggests using the disturbed state concept to develop a constitutive model to predict the stress-strain behavior.The presented constitutive model complies reasonably with the experimental data.展开更多
文摘Mesoscopic characteristics of a clayey soil specimen subjected to macroscopic loading are examined using a medi- cal-use computerized tomography (CT) instrument. Disturbed state concept (DSC) theory is based on the utilization of the hard- ening model. DSC indirectly describes material behavior by claiming that the actual response of the material is expressed in terms of the relative intact (RI) response and the fully adjusted (FA) response. The occurrence of mesoscopic structural changes of material has similarities with the occurrence of a macroscopic response of the material under loadings. In general, the relative changing value of a softening material is three to five times more than that of a hardening material. Whether special zones exist or not in a specimen cross section does not affect the following conclusion: hardening material and softening material show me- chanical differences with CT statistical indices values prominently changing, and the change is related to the superposing of a disturbance factor. A new disturbance factor evolution function is proposed. Thus, mesoscopic statistical indices are introduced to describe macroscopic behavior through the new evolution function. An application of the new evolution function proves the effectiveness of the amalgamation of a macroscopic and a mesoscopic experimental phenomenon measurement methods.
基金Project(50678158) supported by the National Natural Science Foundation of China
文摘The theoretical formulations of Coulomb and Rankine still remain as the fundamental approaches to the analysis of most gravity-type retaining wall,with the assumption that sufficient lateral yield will occur to mobilize fully limited conditions behind the wall.The effects of the magnitude of wall movements and different wall-movement modes are not taken into consideration.The disturbance of backfill is considered to be related to the wall movement under translation mode.On the basis of disturbed state concept(DSC),a general disturbance function was proposed which ranged from-1 to 1.The disturbance variables could be determined from the measured wall movements.A novel approach that related to disturbed degree and the mobilized internal frictional angle of the backfill was also derived.A calculation method benefited from Rankine's theory and the proposed approach was established to predict the magnitude and distribution of earth pressure from the cohesionless backfill under translation mode.The predicted results,including the magnitude and distribution of earth pressure,show good agreement with those of the model test and the finite element method.In addition,the disturbance parameter b was also discussed.
文摘A unified constitutive modeling approach is highly desirable to characterize a wide range of engineeringmaterials subjected simultaneously to the effect of a number of factors such as elastic, plastic and creepdeformations, stress path, volume change, microcracking leading to fracture, failure and softening,stiffening, and mechanical and environmental forces. There are hardly available such unified models. Thedisturbed state concept （DSC） is considered to be a unified approach and is able to provide materialcharacterization for almost all of the above factors. This paper presents a description of the DSC, andstatements for determination of parameters based on triaxial, multiaxial and interface tests. Statementsof DSC and validation at the specimen level and at the boundary value problem levels are also presented.An extensive list of publications by the author and others is provided at the end. The DSC is considered tobe a unique and versatile procedure for modeling behaviors of engineering materials and interfaces. 2016 Institute of Rock and Soil Mechanics, Chinese Academy of Sciences. Production and hosting byElsevier B.V. This is an open access article under the CC BY-NC-ND license
文摘Behavior of rockfills was investigated experimentally and theoretically.A series of standard triaxial compression tests were carried out on a quarried rockfill material at different stress levels.It was found that both the stress level and the shear stress ratio,like most of granular materials,controls the behavior of rockfill materials.At lower shear stress ratios the behavior is much more similar to a nonlinear elastic solid.When the shear stress goes further,the stressstrain curve shows an elasto-plastic behavior which suggests using the disturbed state concept to develop a constitutive model to predict the stress-strain behavior.The presented constitutive model complies reasonably with the experimental data.
