Six degrees of freedom(6DoF)input interfaces are essential formanipulating virtual objects through translation or rotation in three-dimensional(3D)space.A traditional outside-in tracking controller requires the instal...Six degrees of freedom(6DoF)input interfaces are essential formanipulating virtual objects through translation or rotation in three-dimensional(3D)space.A traditional outside-in tracking controller requires the installation of expensive hardware in advance.While inside-out tracking controllers have been proposed,they often suffer from limitations such as interaction limited to the tracking range of the sensor(e.g.,a sensor on the head-mounted display(HMD))or the need for pose value modification to function as an input interface(e.g.,a sensor on the controller).This study investigates 6DoF pose estimation methods without restricting the tracking range,using a smartphone as a controller in augmented reality(AR)environments.Our approach involves proposing methods for estimating the initial pose of the controller and correcting the pose using an inside-out tracking approach.In addition,seven pose estimation algorithms were presented as candidates depending on the tracking range of the device sensor,the tracking method(e.g.,marker recognition,visual-inertial odometry(VIO)),and whether modification of the initial pose is necessary.Through two experiments(discrete and continuous data),the performance of the algorithms was evaluated.The results demonstrate enhanced final pose accuracy achieved by correcting the initial pose.Furthermore,the importance of selecting the tracking algorithm based on the tracking range of the devices and the actual input value of the 3D interaction was emphasized.展开更多
The reduced weight and improved efficiency of modern aeronautical structures result in a decreasing separation of frequency ranges of rigid and elastic modes.Particularly,a high-aspect-ratio flexible flying wing is pr...The reduced weight and improved efficiency of modern aeronautical structures result in a decreasing separation of frequency ranges of rigid and elastic modes.Particularly,a high-aspect-ratio flexible flying wing is prone to body freedomflutter(BFF),which is a result of coupling of the rigid body short-periodmodewith 1st wing bendingmode.Accurate prediction of the BFF characteristics is helpful to reflect the attitude changes of the vehicle intuitively and design the active flutter suppression control law.Instead of using the rigid body mode,this work simulates the rigid bodymotion of the model by using the six-degree-of-freedom(6DOF)equation.A dynamicmesh generation strategy particularly suitable for BFF simulation of free flying aircraft is developed.An accurate Computational Fluid Dynamics/Computational Structural Dynamics/six-degree-of-freedom equation(CFD/CSD/6DOF)-based BFF prediction method is proposed.Firstly,the time-domain CFD/CSD method is used to calculate the static equilibrium state of the model.Based on this state,the CFD/CSD/6DOF equation is solved in time domain to evaluate the structural response of themodel.Then combinedwith the variable stiffnessmethod,the critical flutter point of the model is obtained.This method is applied to the BFF calculation of a flyingwing model.The calculation results of the BFF characteristics of the model agree well with those fromthe modalmethod andNastran software.Finally,the method is used to analyze the influence factors of BFF.The analysis results show that the flutter speed can be improved by either releasing plunge constraint or moving the center ofmass forward or increasing the pitch inertia.展开更多
Non-uniform linear array(NULA)configurations are well renowned due to their structural ability for providing increased degrees of freedom(DOF)and wider array aperture than uniform linear arrays(ULAs).These characteris...Non-uniform linear array(NULA)configurations are well renowned due to their structural ability for providing increased degrees of freedom(DOF)and wider array aperture than uniform linear arrays(ULAs).These characteristics play a significant role in improving the direction-of-arrival(DOA)estimation accuracy.However,most of the existing NULA geometries are primarily applicable to circular sources(CSs),while they limitedly improve the DOF and continuous virtual aperture for noncircular sources(NCSs).Toward this purpose,we present a triaddisplaced ULAs(Tdis-ULAs)configuration for NCS.The TdisULAs structure generally consists of three ULAs,which are appropriately placed.The proposed antenna array approach fully exploits the non-circular characteristics of the sources.Given the same number of elements,the Tdis-ULAs design achieves more DOF and larger hole-free co-array aperture than its sparse array competitors.Advantageously,the number of uniform DOF,optimal distribution of elements among the ULAs,and precise element positions are uniquely determined by the closed-form expressions.Moreover,the proposed array also produces a filled resulting co-array.Numerical simulations are conducted to show the performance advantages of the proposed Tdis-ULAs configuration over its counterpart designs.展开更多
【目的】探究欧李Dof(DNA-binding with one zinc finger)锌指蛋白在非生物胁迫条件下的功能,为ChDof基因的研究与利用奠定基础。【方法】基于欧李全基因组和转录组数据对Dof基因家族进行鉴定,并利用实时定量PCR分析Dof基因在非生物胁...【目的】探究欧李Dof(DNA-binding with one zinc finger)锌指蛋白在非生物胁迫条件下的功能,为ChDof基因的研究与利用奠定基础。【方法】基于欧李全基因组和转录组数据对Dof基因家族进行鉴定,并利用实时定量PCR分析Dof基因在非生物胁迫下的表达情况。【结果】欧李共有23个Dof基因家族成员,其编码区CDS序列长度为226~515 bp,相对分子质量为24227.52~55368.21,理论等电点为4.78~9.36,且其在欧李的8条染色体上都有分布。在构建欧李和拟南芥的系统进化树中发现,欧李共分为9个亚组,同一亚族成员中的基因结构和蛋白保守基序均具有较高的相似性,且欧李Dof基因家族成员主要分布在D1亚组中。在对其亚细胞定位时发现,绝大多数ChDof基因主要分布于细胞核中。对欧李Dof家族成员启动子区域顺式调控元件的预测结果表明,其启动子区存在着至少1个激素调节及逆境胁迫反应元件。qRT-PCR分析结果表明,绝大多数的ChDof基因在盐、高温和低温胁迫下的表达量均上调,而ChDof11、ChDof12、ChDof17基因在盐、渗透(PEG)、高温和低温4种胁迫下的表达量均上升,ChDof03基因对高盐胁迫的反应最敏感,ChDof01基因对低温胁迫的响应最敏感,ChDof11基因在渗透、高温和低温胁迫下的表达量均有极显著的提高,而ChDof7和ChDof08基因在4种胁迫诱导下的表达量均降低。【结论】共鉴定出23个Dof家族成员,欧李ChDof11、ChDof12、ChDof17这3个基因在逆境胁迫中均有控制功能,ChDof7和ChDof08这2个基因则在逆境胁迫中均起负调节作用。Dof基因在欧李对逆境胁迫的响应中发挥着重要作用。展开更多
阐述DNA-binding with one finger(Dof)转录因子在作物中应答极端温度、干旱和盐胁迫等逆境的分子机制及其改良农艺性状的作用;介绍Dof转录因子在作物中响应逆境的信号感知方式和信号转导途径,分析其基因表达调控过程的调控机理以及对...阐述DNA-binding with one finger(Dof)转录因子在作物中应答极端温度、干旱和盐胁迫等逆境的分子机制及其改良农艺性状的作用;介绍Dof转录因子在作物中响应逆境的信号感知方式和信号转导途径,分析其基因表达调控过程的调控机理以及对胁迫耐受力与重要次生代谢产物(RFOs等)等积累的影响。同时从多信号网络调控机制以及全球气候变化对作物可持续和高质量生产的需求角度,对进一步研究和利用Dof转录因子进行作物生物育种的前景和方向作展望。展开更多
The Unmanned Surface Vehicle(USV)navigation system needs an accurate,firm,and reliable performance to avoid obstacles,as well as carry out automatic movements during missions.The Global Positioning System(GPS)is often...The Unmanned Surface Vehicle(USV)navigation system needs an accurate,firm,and reliable performance to avoid obstacles,as well as carry out automatic movements during missions.The Global Positioning System(GPS)is often used in these systems to provide absolute position information.However,the GPS measurements are affected by external conditions such as atmospheric bias and multipath effects.This leads to the inability of the stand-alone GPS to provide accurate positioning for the USV systems.One of the solutions to correct the errors of this sensor is by conducting GPS and Inertial Measurement Unit(IMU)fusion.The IMU sensor is complementary to the GPS and not affected by external conditions.However,it accumulates noise as time elapses.Therefore,this study aims to determine the fusion of the GPS and IMU sensors for the i-Boat navigation system,which is a USV developed by Institut Teknologi Sepuluh Nopember(ITS)Surabaya.Using the Unscented Kalman filter(UKF),sensor fusion was carried out based on the state equation defined by the dynamic and kinematic mathematical model of ship motion in 6 degrees of freedom.Then the performance of this model was tested through several simulations using different combinations of attitude measurement data.Two scenarios were conducted in the simulations:attitude measurement inclusion and exclusion(Scenarios I and II,respectively).The results showed that the position estimation in Scenario II was better than in Scenario I,with the Root Mean Square Error(RMSE)value of 0.062 m.Further simulations showed that the presence of attitude measurement data caused a decrease in the fusion accuracy.The UKF simulation with eight measurement parameters(Scenarios A,B and C)and seven measurement parameters(Scenarios D,E and F),as well as analytical attitude movement,indicated that yaw data had the largest noise accumulation compared to roll and pitch.展开更多
Bridge frequency(BF)identification using the vehicle scanning method has attracted considerable attention during the last two decades.However,most previous studies have adopted unrealistic vehicle models,thus finding ...Bridge frequency(BF)identification using the vehicle scanning method has attracted considerable attention during the last two decades.However,most previous studies have adopted unrealistic vehicle models,thus finding limited practical applications.This study proposes a smartphone-based BF identification method that uses the contact-point acceleration response of a four degree-of-freedom vehicle model.The said response can be inferred from the vehicle body response measured by a smartphone.For realizing practical applications,this method is incorporated into a self-developed smartphone app to obtain data smoothly and identify BFs in a timely manner.Numerical and experimental investigations are performed to verify the effectiveness of the proposed method.In particular,the robustness of this method is investigated numerically against various factors,including the vehicle speed,bridge span,road roughness,and bridge type.Furthermore,laboratory calibration tests are performed to investigate the accuracy of the smartphone gyroscope in measuring the angular velocity,where anomalous data are detected and eliminated.Laboratory experiment results for a simply supported bridge indicate that the proposed method can be used to identify the first two BFs with acceptable accuracy.展开更多
3Do F VR是VR视频的一种代表性形态,也是目前虚拟现实领域普遍应用的形式。图像质量是一项会影响用户真实沉浸视觉感受的VR视频QoE的重要指标。目前国内外暂未形成VR视频领域图像质量主观评价的标准方法,为此,本文研究提出了一套3Do F V...3Do F VR是VR视频的一种代表性形态,也是目前虚拟现实领域普遍应用的形式。图像质量是一项会影响用户真实沉浸视觉感受的VR视频QoE的重要指标。目前国内外暂未形成VR视频领域图像质量主观评价的标准方法,为此,本文研究提出了一套3Do F VR视频图像质量主观评价方法。文章首先对VR视频主观评价的挑战、国内外进展进行分析调研,随后着重阐述了3Do F VR视频主观评价前期准备研究、主观评价量表设计、主观评价打分方法改进、实验序列制作等环节,最后进行了3DoF VR视频图像质量主观评价实验,并对实验数据进行了分析和总结。展开更多
【目的】全基因组水平鉴定并解析玉米Dof(DNA binding with one finger)基因家族。【方法】基于玉米V3基因组数据鉴定玉米Dof基因家族,并从基因的结构、系统发育关系、染色体的位置分布、玉米不同组织和不同生理发育阶段基因的表达谱以...【目的】全基因组水平鉴定并解析玉米Dof(DNA binding with one finger)基因家族。【方法】基于玉米V3基因组数据鉴定玉米Dof基因家族,并从基因的结构、系统发育关系、染色体的位置分布、玉米不同组织和不同生理发育阶段基因的表达谱以及在充足氮(sufficient nitrogen,SN)和低氮(limiting nitrogen,LN)条件下V3期叶组织基因的差异表达5个方面分析玉米Dof基因家族。【结果】玉米参考基因组中存在46个Dof结构域基因,命名为Zm V3Dof1—Zm V3Dof46。通过系统发育关系和序列相似性将该基因家族分为8个亚类(Subgroup)S1—S8,每个亚类有3—8个Dof基因。通过分析该家族染色体分布,发现玉米10条染色体,除Chr.9外,均有Dof基因的分布,其中,在Chr.1上分布最为密集,有12个Zm V3Dofs;在Chr.5和Chr.3上分布次之,分别为8和7个Zm V3Dofs;在其他染色体上则分布较少,此外,Dofs在Chr.1的底部、Chr.5的顶部和底部分布密度相对较高。表达谱分析结果表明,Dof基因家族成员在不同组织及不同发育阶段均有差异表达,预示不同Dof基因功能的多样性以及在植物发育过程中扮演着不同角色,且同一亚类Dof基因表达模式存在一定程度的相似性。此外,玉米Dof基因家族对氮响应较为敏感,充足氮(SN)和低氮(LN)条件下,V3期叶组织基因的RNAseq表达结果显示35个Dof基因在2种氮处理下表达量存在差异,其中13个基因表达量差异较大。值得注意的是21个Dof基因在低氮处理下表达量上调,其中8个基因只在低氮条件下表达。【结论】基于最新版基因组数据鉴定玉米在自交系B73基因组中存在46个Dof基因,Dof基因家族成员参与玉米不同生理发育过程中,部分基因可能在氮代谢调控中发挥积极作用。展开更多
采用SMART-RACE技术克隆了茶树Dof(DNA binding with one finger)基因CsCDF1的全长c DNA序列,并利用在线生物信息学软件对其进行了分析。采用实时荧光定量PCR分析该Dof基因在茶树不同组织间的表达差异和昼夜表达规律,及其在氮饥饿处理2...采用SMART-RACE技术克隆了茶树Dof(DNA binding with one finger)基因CsCDF1的全长c DNA序列,并利用在线生物信息学软件对其进行了分析。采用实时荧光定量PCR分析该Dof基因在茶树不同组织间的表达差异和昼夜表达规律,及其在氮饥饿处理2周后对不同浓度氮素诱导的响应。该c DNA序列全长1 606 bp,包含1个编码464个氨基酸的完整开放阅读框,含有高度保守的DOF结构域,推导的蛋白分子量为50.8 k Da,理论等电点(PI)为5.52;其编码的蛋白序列与茸毛烟草、马铃薯和美花烟草的CDF蛋白(Cycling dof factor)相似性分别为69%、67%、68%。系统发育分析结果表明,该基因编码的氨基酸序列与拟南芥CDF蛋白聚为一类,因此将其命名为CsCDF1;CsCDF1在3个不同茶树品种根系中的表达量均高于一芽二叶和成熟叶;在一天中,该基因的表达呈现出昼夜节律变化;在氮饥饿后重新供氮,不同组织中该基因对不同浓度氮素的响应均为上调。展开更多
文摘Six degrees of freedom(6DoF)input interfaces are essential formanipulating virtual objects through translation or rotation in three-dimensional(3D)space.A traditional outside-in tracking controller requires the installation of expensive hardware in advance.While inside-out tracking controllers have been proposed,they often suffer from limitations such as interaction limited to the tracking range of the sensor(e.g.,a sensor on the head-mounted display(HMD))or the need for pose value modification to function as an input interface(e.g.,a sensor on the controller).This study investigates 6DoF pose estimation methods without restricting the tracking range,using a smartphone as a controller in augmented reality(AR)environments.Our approach involves proposing methods for estimating the initial pose of the controller and correcting the pose using an inside-out tracking approach.In addition,seven pose estimation algorithms were presented as candidates depending on the tracking range of the device sensor,the tracking method(e.g.,marker recognition,visual-inertial odometry(VIO)),and whether modification of the initial pose is necessary.Through two experiments(discrete and continuous data),the performance of the algorithms was evaluated.The results demonstrate enhanced final pose accuracy achieved by correcting the initial pose.Furthermore,the importance of selecting the tracking algorithm based on the tracking range of the devices and the actual input value of the 3D interaction was emphasized.
基金This work was supported by the National Natural Science Foundation of China(No.11872212)and a project funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions.
文摘The reduced weight and improved efficiency of modern aeronautical structures result in a decreasing separation of frequency ranges of rigid and elastic modes.Particularly,a high-aspect-ratio flexible flying wing is prone to body freedomflutter(BFF),which is a result of coupling of the rigid body short-periodmodewith 1st wing bendingmode.Accurate prediction of the BFF characteristics is helpful to reflect the attitude changes of the vehicle intuitively and design the active flutter suppression control law.Instead of using the rigid body mode,this work simulates the rigid bodymotion of the model by using the six-degree-of-freedom(6DOF)equation.A dynamicmesh generation strategy particularly suitable for BFF simulation of free flying aircraft is developed.An accurate Computational Fluid Dynamics/Computational Structural Dynamics/six-degree-of-freedom equation(CFD/CSD/6DOF)-based BFF prediction method is proposed.Firstly,the time-domain CFD/CSD method is used to calculate the static equilibrium state of the model.Based on this state,the CFD/CSD/6DOF equation is solved in time domain to evaluate the structural response of themodel.Then combinedwith the variable stiffnessmethod,the critical flutter point of the model is obtained.This method is applied to the BFF calculation of a flyingwing model.The calculation results of the BFF characteristics of the model agree well with those fromthe modalmethod andNastran software.Finally,the method is used to analyze the influence factors of BFF.The analysis results show that the flutter speed can be improved by either releasing plunge constraint or moving the center ofmass forward or increasing the pitch inertia.
基金supported by the National Natural Science Foundation of China(62031017,61971221)the Fundamental Research Funds for the Central Universities of China(NP2020104)。
文摘Non-uniform linear array(NULA)configurations are well renowned due to their structural ability for providing increased degrees of freedom(DOF)and wider array aperture than uniform linear arrays(ULAs).These characteristics play a significant role in improving the direction-of-arrival(DOA)estimation accuracy.However,most of the existing NULA geometries are primarily applicable to circular sources(CSs),while they limitedly improve the DOF and continuous virtual aperture for noncircular sources(NCSs).Toward this purpose,we present a triaddisplaced ULAs(Tdis-ULAs)configuration for NCS.The TdisULAs structure generally consists of three ULAs,which are appropriately placed.The proposed antenna array approach fully exploits the non-circular characteristics of the sources.Given the same number of elements,the Tdis-ULAs design achieves more DOF and larger hole-free co-array aperture than its sparse array competitors.Advantageously,the number of uniform DOF,optimal distribution of elements among the ULAs,and precise element positions are uniquely determined by the closed-form expressions.Moreover,the proposed array also produces a filled resulting co-array.Numerical simulations are conducted to show the performance advantages of the proposed Tdis-ULAs configuration over its counterpart designs.
文摘【目的】探究欧李Dof(DNA-binding with one zinc finger)锌指蛋白在非生物胁迫条件下的功能,为ChDof基因的研究与利用奠定基础。【方法】基于欧李全基因组和转录组数据对Dof基因家族进行鉴定,并利用实时定量PCR分析Dof基因在非生物胁迫下的表达情况。【结果】欧李共有23个Dof基因家族成员,其编码区CDS序列长度为226~515 bp,相对分子质量为24227.52~55368.21,理论等电点为4.78~9.36,且其在欧李的8条染色体上都有分布。在构建欧李和拟南芥的系统进化树中发现,欧李共分为9个亚组,同一亚族成员中的基因结构和蛋白保守基序均具有较高的相似性,且欧李Dof基因家族成员主要分布在D1亚组中。在对其亚细胞定位时发现,绝大多数ChDof基因主要分布于细胞核中。对欧李Dof家族成员启动子区域顺式调控元件的预测结果表明,其启动子区存在着至少1个激素调节及逆境胁迫反应元件。qRT-PCR分析结果表明,绝大多数的ChDof基因在盐、高温和低温胁迫下的表达量均上调,而ChDof11、ChDof12、ChDof17基因在盐、渗透(PEG)、高温和低温4种胁迫下的表达量均上升,ChDof03基因对高盐胁迫的反应最敏感,ChDof01基因对低温胁迫的响应最敏感,ChDof11基因在渗透、高温和低温胁迫下的表达量均有极显著的提高,而ChDof7和ChDof08基因在4种胁迫诱导下的表达量均降低。【结论】共鉴定出23个Dof家族成员,欧李ChDof11、ChDof12、ChDof17这3个基因在逆境胁迫中均有控制功能,ChDof7和ChDof08这2个基因则在逆境胁迫中均起负调节作用。Dof基因在欧李对逆境胁迫的响应中发挥着重要作用。
文摘阐述DNA-binding with one finger(Dof)转录因子在作物中应答极端温度、干旱和盐胁迫等逆境的分子机制及其改良农艺性状的作用;介绍Dof转录因子在作物中响应逆境的信号感知方式和信号转导途径,分析其基因表达调控过程的调控机理以及对胁迫耐受力与重要次生代谢产物(RFOs等)等积累的影响。同时从多信号网络调控机制以及全球气候变化对作物可持续和高质量生产的需求角度,对进一步研究和利用Dof转录因子进行作物生物育种的前景和方向作展望。
基金the i-Boat ITS TeamDRPM ITS IndonesiaWorld-Class Professor Program (Ministry of Higher Education, Research, and Technology, Indonesia) for the data and financial support of this study
文摘The Unmanned Surface Vehicle(USV)navigation system needs an accurate,firm,and reliable performance to avoid obstacles,as well as carry out automatic movements during missions.The Global Positioning System(GPS)is often used in these systems to provide absolute position information.However,the GPS measurements are affected by external conditions such as atmospheric bias and multipath effects.This leads to the inability of the stand-alone GPS to provide accurate positioning for the USV systems.One of the solutions to correct the errors of this sensor is by conducting GPS and Inertial Measurement Unit(IMU)fusion.The IMU sensor is complementary to the GPS and not affected by external conditions.However,it accumulates noise as time elapses.Therefore,this study aims to determine the fusion of the GPS and IMU sensors for the i-Boat navigation system,which is a USV developed by Institut Teknologi Sepuluh Nopember(ITS)Surabaya.Using the Unscented Kalman filter(UKF),sensor fusion was carried out based on the state equation defined by the dynamic and kinematic mathematical model of ship motion in 6 degrees of freedom.Then the performance of this model was tested through several simulations using different combinations of attitude measurement data.Two scenarios were conducted in the simulations:attitude measurement inclusion and exclusion(Scenarios I and II,respectively).The results showed that the position estimation in Scenario II was better than in Scenario I,with the Root Mean Square Error(RMSE)value of 0.062 m.Further simulations showed that the presence of attitude measurement data caused a decrease in the fusion accuracy.The UKF simulation with eight measurement parameters(Scenarios A,B and C)and seven measurement parameters(Scenarios D,E and F),as well as analytical attitude movement,indicated that yaw data had the largest noise accumulation compared to roll and pitch.
基金National Natural Science Foundation of China under Grant Nos.51978215 and 52378295National Key R&D Program of China under Grant No.2019YFC1511100+1 种基金Guangdong Basic and Applied Basic Research Foundation under Grant No.2022A1515110587Shenzhen S&T Project under Grant Nos.JCYJ20200109112816582 and KQTD20210811090112003。
文摘Bridge frequency(BF)identification using the vehicle scanning method has attracted considerable attention during the last two decades.However,most previous studies have adopted unrealistic vehicle models,thus finding limited practical applications.This study proposes a smartphone-based BF identification method that uses the contact-point acceleration response of a four degree-of-freedom vehicle model.The said response can be inferred from the vehicle body response measured by a smartphone.For realizing practical applications,this method is incorporated into a self-developed smartphone app to obtain data smoothly and identify BFs in a timely manner.Numerical and experimental investigations are performed to verify the effectiveness of the proposed method.In particular,the robustness of this method is investigated numerically against various factors,including the vehicle speed,bridge span,road roughness,and bridge type.Furthermore,laboratory calibration tests are performed to investigate the accuracy of the smartphone gyroscope in measuring the angular velocity,where anomalous data are detected and eliminated.Laboratory experiment results for a simply supported bridge indicate that the proposed method can be used to identify the first two BFs with acceptable accuracy.
文摘3Do F VR是VR视频的一种代表性形态,也是目前虚拟现实领域普遍应用的形式。图像质量是一项会影响用户真实沉浸视觉感受的VR视频QoE的重要指标。目前国内外暂未形成VR视频领域图像质量主观评价的标准方法,为此,本文研究提出了一套3Do F VR视频图像质量主观评价方法。文章首先对VR视频主观评价的挑战、国内外进展进行分析调研,随后着重阐述了3Do F VR视频主观评价前期准备研究、主观评价量表设计、主观评价打分方法改进、实验序列制作等环节,最后进行了3DoF VR视频图像质量主观评价实验,并对实验数据进行了分析和总结。
文摘采用SMART-RACE技术克隆了茶树Dof(DNA binding with one finger)基因CsCDF1的全长c DNA序列,并利用在线生物信息学软件对其进行了分析。采用实时荧光定量PCR分析该Dof基因在茶树不同组织间的表达差异和昼夜表达规律,及其在氮饥饿处理2周后对不同浓度氮素诱导的响应。该c DNA序列全长1 606 bp,包含1个编码464个氨基酸的完整开放阅读框,含有高度保守的DOF结构域,推导的蛋白分子量为50.8 k Da,理论等电点(PI)为5.52;其编码的蛋白序列与茸毛烟草、马铃薯和美花烟草的CDF蛋白(Cycling dof factor)相似性分别为69%、67%、68%。系统发育分析结果表明,该基因编码的氨基酸序列与拟南芥CDF蛋白聚为一类,因此将其命名为CsCDF1;CsCDF1在3个不同茶树品种根系中的表达量均高于一芽二叶和成熟叶;在一天中,该基因的表达呈现出昼夜节律变化;在氮饥饿后重新供氮,不同组织中该基因对不同浓度氮素的响应均为上调。
