A cascade of in situ conversion of bicarbonate to CO_(2) and CO_(2) electroreduction in a flow cell with a Ni-N-S catalyst

Combination of CO_(2) capture using inorganic alkali with subsequently electrochemical conversion of the resultant HCO_(3)^(-)to high-value chemicals is a promising route of low cost and high efficiency.The electrochemical reduction of HCO_(3)^(-)is challenging due to the inaccessible of negatively charged molecular groups to the electrode surface.Herein,we adopt a comprehensive strategy to tackle this challenge,i.e.,cascade of in situ chemical conversion of HCO_(3)^(-)to CO_(2) and CO_(2) electrochemical reduction in a flow cell.With a tailored Ni-N-S single atom catalyst(SACs),where sulfur(S)atoms located in the second shell of Ni center,the CO_(2)electroreduction(CO_(2)ER)to CO is boosted.The experimental results and density functional theory(DFT)calculations reveal that the introduction of S increases the p electron density of N atoms near Ni atom,thereby stabilizing^(*)H over N and boosting the first proton coupled electron transfer process of CO_(2)ER,i.e.,^(*)+e^(-)+^(*)H+^(*)CO_(2)→^(*)COOH.As a result,the obtained catalyst exhibits a high faradaic efficiency(FE_(CO)~98%)and a low overpotential of 425 mV for CO production as well as a superior turnover frequency(TOF)of 47397 h^(-1),outcompeting most of the reported Ni SACs.More importantly,an extremely high FECOof 90%is achieved at 50 mA cm^(-2)in the designed membrane electrode assembly(MEA)cascade electrolyzer fed with liquid bicarbonate.This work not only highlights the significant role of the second coordination on the first coordination shell of the central metal for CO_(2)ER,but also provides an alternative and feasible strategy to realize the electrochemical conversion of HCO_(3)^(-)to high-value chemicals.

Influence of alkali metal doping on surface properties and catalytic activity/selectivity of CaO catalysts in oxidative coupling of methane

Surface properties （viz. surface area, basicity/base strength distribution, and crystal phases） of alkali metal doped CaO （alkali metal/Ca= 0.1 and 0.4） catalysts and their catalytic activity/selectivity in oxidative coupling of methane （OCM） to higher hydrocarbons at different reaction conditions （viz. temperature, 700 and 750 ℃; CH4/O2 ratio, 4.0 and 8.0 and space velocity, 5140-20550 cm^3 ·g^-1·h^-1） have been investigated. The influence of catalyst calcination temperature on the activity/selectivity has also been investigated. The surface properties （viz. surface area, basicity/base strength distribution） and catalytic activity/selectivity of the alkali metal doped CaO catalysts are strongly influenced by the alkali metal promoter and its concentration in the alkali metal doped CaO catalysts. An addition of alkali metal promoter to CaO results in a large decrease in the surface area but a large increase in the surface basicity （strong basic sites） and the C2＋ selectivity and yield of the catalysts in the OCM process. The activity and selectivity are strongly influenced by the catalyst calcination temperature. No direct relationship between surface basicity and catalytic activity/selectivity has been observed. Among the alkali metal doped CaO catalysts, Na-CaO （Na/Ca = 0.1, before calcination） catalyst （calcined at 750 ℃）, showed best performance （C2＋ selectivity of 68.8% with 24.7% methane conversion）, whereas the poorest performance was shown by the Rb-CaO catalyst in the OCM process.

High-throughput calculation-based rational design of Fe-doped MoS_(2) nanosheets for electrocatalytic p H-universal overall water splitting

Electrocatalytic water splitting is crucial for H2generation via hydrogen evolution reaction(HER)but subject to the sluggish dynamics of oxygen evolution reaction(OER).In this work,single Fe atomdoped MoS_(2)nanosheets(SFe-DMNs)were prepared based on the high-throughput density functional theory(DFT)calculation screening.Due to the synergistic effect between Fe atom and MoS_(2)and optimized intermediate binding energy,the SFe-DMNs could deliver outstanding activity for both HER and OER.When assembled into a two-electrode electrolytic cell,the SFe-DMNs could achieve the current density of 50 mA cm^(-2)at a low cell voltage of 1.55 V under neutral condition.These results not only confirmed the effectiveness of high-throughput screening,but also revealed the excellent activity and thus the potential applications in fuel cells of SFe-DMNs.

Recent progress in thermodynamic and kinetics modification of magnesium hydride hydrogen storage materials

Hydrogen energy has emerged as a pivotal solution to address the global energy crisis and pave the way for a cleaner,low-carbon,secure,and efficient modern energy system.A key imperative in the utilization of hydrogen energy lies in the development of high-performance hydrogen storage materials.Magnesium-based hydrogen storage materials exhibit remarkable advantages,including high hydrogen storage density,cost-effectiveness,and abundant magnesium resources,making them highly promising for the hydrogen energy sector.Nonetheless,practical applications of magnesium hydride for hydrogen storage face significant challenges,primarily due to their slow kinetics and stable thermodynamic properties.Herein,we briefly summarize the thermodynamic and kinetic properties of MgH2,encompassing strategies such as alloying,nanoscaling,catalyst doping,and composite system construction to enhance its hydrogen storage performance.Notably,nanoscaling and catalyst doping have emerged as more effective modification strategies.The discussion focuses on the thermodynamic changes induced by nanoscaling and the kinetic enhancements resulting from catalyst doping.Particular emphasis lies in the synergistic improvement strategy of incorporating nanocatalysts with confinement materials,and we revisit typical works on the multi-strategy optimization of MgH2.In conclusion,we conduct an analysis of outstanding challenges and issues,followed by presenting future research and development prospects for MgH2 as hydrogen storage materials.

Effect of doping elements on catalytic performance of CeO_2-ZrO_2 solid solutions

CeZr, CeYZr, LaCeZr, LaCePrZr, LaCePrYZr, and LaCePr solid solutions were prepared via the coprecipitation method, and characterized by means of X-Ray Diffraction （XRD） and Brunauer-Emmett-Teller （BET） techniques. The oxygen storage capacity （OSC） of the solid solutions was evaluated by the pulse technique and the catalytic activity was assessed using a 4-channel catalysis device. It was seen that the solid solutions presented cubic structure. The specific surface area and thermal stability could be enhanced by doping Y into the solid solutions. Doping a small amount of La had a positive effect on the thermal durability while doping a large amount of La decreased the specific surface area and the thermal stability. LaCePrZr and LaCePrYZr solid solutions synthesized using Baotou rare earth mineral residue enriched with LaCePr after Nd extraction presented a certain higher value in specific surface area and thermal stability, thereby enabling to be used as economic catalysts for automobile exhaust purification. Coating Al2O3 or SiO2 layer on the surface of ceria-zirconia solid solutions increased the specific surface area and thermal resistance.

Oxidation of propane to acrylic acid and acetic acid over alkaline earth-doped Mo-V-Sb-O_x catalysts

Alkaline earth metal （Mg,Ca,Sr and Ba）-doped Mo-V-Sb-O x catalysts,prepared by a dry-up method,have been investigated for their catalytic performance in the oxidation of propane under different reaction conditions.The catalysts have been characterized by N2 adsorption-desorption,temperature-programmed desorption （TPD） of NH3,SEM and XRD.Influence of water vapor on the catalytic performance,particularly on the selectivities to acetic acid and acrylic acid,has also been studied.The selectivity to acrylic acid was improved significantly by the doping of alkaline earth metals to Mo-V-Sb-O x catalysts.The surface acidic sites of the catalyst decreased with the doping of the catalyst with alkaline earth metals,which ultimately was found to be beneficial for obtaining high selectivity to acrylic acid.The catalytic activity and product selectivities were found to be influenced by the reaction temperature,C3H8/O2 ratio and space velocity.A significant improvement in the selectivity to acrylic acid has also been observed by the addition of water vapor in the feed of propane and oxygen in the oxidation of propane.

Preparation of Cerium Doped Cu/MIL-53(A1) Catalyst and Its Catalytic Activity in CO Oxidation Reaction

Metal-organic framework（MOF） material MIL-53（A1） with high thermal stability was prepared by a solvothermal method,serving as a support material of cerium doped copper catalyst（Ce-Cu）/MIL-53（A1） material for CO oxidation with high catalytic activity.The catalytic performance between the（CuCe）/MIL-53（A1） and the Cu/MIL-53（A1） catalytic material was compared to understand the catalytic behavior of the catalysts.The catalysts were characterized by thermogravimetric-differential scanning calorimetry（TGDSC）,N2 adsorption- desorption,X-ray diffraction（XRD）,and transmission electron microscopy（TEM）.The characterization results showed that MIL-53（A1） had good stability and high surface areas,the（Ce-Cu）nanoparticles on the MIL-53（A1） support was uniform.Therefore,the heterogeneous catalytic composite materials（Ce-Cu）/MIL-53（A1） catalyst exhibited much higher activity than that of the Cu/MIL- 53（A1） catalyst in CO oxidation test,with 100%conversion at 80 ℃.The results reveal that（Cu-Ce）/MIL-53（A1） is the suitable candidate for achieving low temperature and higher activity CO oxidation catalyst of MOFs.

Doping Effect of CuO on CeO_2 for CO Oxidation

Cu-Ce-O catalysts, prepared by the amorphous citrate precursor (ACP) method, wereinvestigated by ICP, XRD and ndcro-reactor techniques. At low copper content of Cu-Ce-Ocatalysts, fluorite structures formed at low calcining temperatures, and Cuo doped into the CeO2matrix; at high copper content, in addition to the fluorite structure, crystalline monoclinic phaseCuO formed as well at high calcining temperatures. There was no other phase formed even calcinedat 1000℃. The results show that only a little CuO dopes into the CeO2 matrix to form complexoxide, which promotes the catalytic activity of CO oxidation greatly. The optimum Cu-Ce-Ocatalyst is composed of 15% copper by Cu/(Ce+Cu) atomic ratio, and calcined at 700℃ for 4h. Thephase compositions include the crystalline CuO and the active complex oxide with fluoritestructure. The formulation of the active complex oxide is Cu0.06Ce0. 94O1.94.

Modulating the CO methanation activity of Ni catalyst by nitrogen doped carbon

Nitrogen doping has been proved to be an effective way to modify the properties of graphene and other carbon materials. Herein, we explore a composite with nitrogen doped carbon overlayers wrapping Si C substrate as a support for Ni（Ni/CN-Si C） and evaluate its effects on the methanation activity. The results show that both the activity and stability of Ni are enhanced. Characterization with STEM, XRD, XPS, Raman and H2-TPR indicates that nitrogen doping generates more defects in the carbon overlayers, which benefit the dispersion of Ni. Furthermore, the reduction of Ni is facilitated.

Natural tea-leaf-derived, ternary-doped 3D porous carbon as a high-performance electrocatalyst for the oxygen reduction reaction

To commercialize fuel cells and metal-air batteries, cost-effective, highly active catalysts for the oxygen reduction reaction （ORR） must be developed. Herein, we describe the development of low-cost, heteroatom （N, P, Fe） ternary-doped, porous carbons （HDPC）. These materials are prepared by one-step pyrolysis of natural tea leaves treated with an iron salt, without any chemical and physical activation. The natural structure of the tea leaves provide a 3D hierarchical porous structure after carbonization. Moreover, heteroatom containing organic compounds in tea leaves act as precursors to functionalize the resultant carbon frameworks. In addition, we found that the polyphenols present in tea leaves act as ligands, reacting with Fe ions to form coordination compounds; these complexes acted as the precursors for Fe and N active sites. After pyrolysis, the as-prepared HDPC electrocatalysts, especially HDPC-800 （pyrolyzed at 800℃）, had more positive onsets, half-wave potentials, and higher catalytic activities for the ORR, which proceeds via a direct four-electron reaction pathway in alkaline media, similar to commercial Pt/C catalysts. Furthermore, HDPC-X also showed enhanced durability and better tolerance to methanol crossover and CO poisoning effects in comparison to commercial Pt/C, making them promising alternatives for state-of-the-art ORR electrocatalysts for electrochemical energy conversion. The method used here provides valuable guidelines for the design of high-performance ORR electrocatalysts from natural sources at the industrial scale.

Effects of bimetallic catalysts on synthesis of nitrogen-doped carbon nanotubes as nanoscale energetic materials

Well aligned nitrogen-doped carbon nanotubes （CNx-NTs）, as energetic materials, are synthesized on a silicon substrate by aerosol-assisted chemical vapor deposition, Tungsten （W） and molybdenum （Mo） metals are respectively introduced to combine with iron （Fe） to act as a bimetallic co-catalyst layer. Cor- relations between the composition and shape of the co-catalyst and morphology, size, growth rate and nitrogen doping amount of the synthesized CNx-NTs are investigated by secondary and backscattered electron imaging in a field emission scanning electron microscope （FESEM） and X-ray photoelectron spectrometer （XPS）. Compared to pure iron catalyst, W-Fe co-catalyst can result in lower growth rate, larger diameter and wider size distribution of the CNx-NTs; while incorporation of molybdenum into the iron catalyst layer can reduce the diameter and size distribution of the nanotubes. Compared to the sole iron catalyst, Fe-W catalyst impedes nitrogen doping while Fe-Mo catalyst promotes the incorporation of nitrogen into the nanotubes. The present work indicates that CNx-NTs with modulated size, growth rate and nitrogen doping concentration are expected to be synthesized by tuning the size and composition of co-catalysts, which may find great potential in producing CNx-NTs with controlled structure and properties,