Semiconductor quantum dots(QDs) were used for labeling many biomacromolecules and small molecules,but it remains a challenge to couple it with short active peptides without any limitation,which play critical roles in ...Semiconductor quantum dots(QDs) were used for labeling many biomacromolecules and small molecules,but it remains a challenge to couple it with short active peptides without any limitation,which play critical roles in many physiological processes.Several coupling methods known about QDs and short peptides have some limitations.In this research,we report a method for the synthesis of QDs labeled peptides to be appropriate to any short peptide.The QDs(CdTe)-labeled short peptides were verified and characterized by RP-HPLC.The result shows that the surface of the T cell treated with QDs-TP5 emits yellow fluoresence.These results indicate that QDs-TP5 tends to aggregate on the surface of T cells.They were applied to monitoring the specific binding between the immune peptides and T cell surface receptors.The binding and the resultant fluorescence were observed and monitored by fluorescence microscope in vitro.The QDs-labeled immune peptides provide a powerful method for studying the immune modulating activity of TP5 in vivo.展开更多
This paper reported an efficient and rapid method to produce highly monodispersed CdSe quantum dots (QDs), in which the traditional trioctylphosphine oxide (TOPO) was replaced by paraffin liquid as solvent and oleic a...This paper reported an efficient and rapid method to produce highly monodispersed CdSe quantum dots (QDs), in which the traditional trioctylphosphine oxide (TOPO) was replaced by paraffin liquid as solvent and oleic acid as the reacting media. The experimental conditions and the properties of QDs had been studied in detail. The resulting samples were confirmed of uniform size distribution with transmission electronic microscopy (TEM), while UV-vis absorption and photoluminescence (PL) spectra clearly indicated that such synthesized QDs had good fluorescence properties.展开更多
The 1.55-μm quantum-dot (QD) micropillar cavities are strongly required as single photon sources (SPSs) for silica-fiber-based quantum information processing. Theoretical analysis shows that the adiabatic distributed...The 1.55-μm quantum-dot (QD) micropillar cavities are strongly required as single photon sources (SPSs) for silica-fiber-based quantum information processing. Theoretical analysis shows that the adiabatic distributed Bragg reflector (DBR) structure may greatly improve the quality of a micropillar cavity. An InGaAsP/InP micropillar cavity is originally difficult, but it becomes more likely usable with inserted tapered (thickness decreased towards the center) distributed DBRs. Simulation turns out that, incorporating adiabatically tapered DBRs, a Si/SiO2- InP hybrid micropillar cavity, which enables weakly coupling InAs/InP quantum dots (QDs), can even well satisfy strong coupling at a smaller diameter. Certainly, not only the tapered structure, other adiabatic designs, e.g., both DBR layers getting thicker and one thicker one thinner, also improve the quality, reduce the diameter, and degrade the fabrication difficulty of Si/SiO2-InP hybrid micropillar cavities. Furthermore, the problem of the thin epitaxial semiconductor layer can also be greatly resolved by inserting adiabatic InGaAsP/InP DBRs. With tapered DBRs, the InGaAsP/InP-air-aperture micro-pillar cavity serves as an efficient, coherent, and monolithically producible 1.55-μm single-photon source (SPS). The adiabatic design is thus an effective way to obtain prospective candidates for 1.55-μm QD SPSs.展开更多
The cytotoxicity and DNA damage caused by thioglycolic acid（TGA）-capped cadmium telluride（CdTe） quantum dots（QDs） to hepatocyte line HL-7702 were investigated.Cell viability was measured by 3-（4,5-dimethylthiaz...The cytotoxicity and DNA damage caused by thioglycolic acid（TGA）-capped cadmium telluride（CdTe） quantum dots（QDs） to hepatocyte line HL-7702 were investigated.Cell viability was measured by 3-（4,5-dimethylthiazol-2-yl）-2,5-diphenyltetrazolium bromide（MTT） assay;DNA damage was detected by single cell gel electrophoresis（SCGE）;the change of cell cycle progression was examined by propidium iodide（PI）-flow cytometry（FCM）;apoptosis was measured by acridine orange/ethidium bromide（AO/EB） assay and Annexin V-FITC/PI-FCM（FITC：fluorescein isothiocyanate）.The results show that the cytotoxicity induced by CdTe QDs was increased in a dose-dependent and time-dependent manner;after exposure to QDs for 24 h,as the exposure dose increased,the rate of DNA damage was significantly increased（P0.05）,and the degree of DNA damage was elevated.As the dose of CdTe QDs increased,the percentage of G 0 /G 1 phase cells was significantly decreased（P0.001）,while the percenttages of S and G 2 /M phases cells were significantly increased（P0.001）.In AO/EB assay,apoptotic cells could be observed under a fluorescence microscope,and apoptotic rate was increased as exposure dose increased.In Annexin V-FITC/PI-FCM assay,the apoptotic rates of CdTe QDs treated groups were significantly increased compared with that of control group（P0.05）.Our studies indicate that CdTe QDs could influence cell viability,and induce DNA damage,the S and G2 /M phases arrest and apoptosis of HL-7702.展开更多
In this work the enhanced molecularly imprinted optosensing material based on graphene oxide-quantum dots （ GO- QDs） was synthesized for highly selective and sensitive specific recognition of the target protein, bov...In this work the enhanced molecularly imprinted optosensing material based on graphene oxide-quantum dots （ GO- QDs） was synthesized for highly selective and sensitive specific recognition of the target protein, bovine serum albumin （BSA）. Here, GO was introduced to enhance the efficiency of mass-transfer in recognition of target protein. Molecularly imprinted polymer coated GO-QDs using BSA as template （BMIP-coated GO-QDs ） exhibited a fast mass-transfer speed, which could be ascribed to the high volume of efficient surface area and high target recognition efficiency of the synthesized nanoscale device. Under optimal conditions, it was found that the BSA as target protein could remarkably quench the relative fluorescence intensity of BMIP- coated GO-QDs linearly in a concentration-dependent manner that was best described by a Stern-Volmer equation. The Ksv （Stern- Volmer constant） for template BSA was much higher than bovine hemoglobin （BHb） and lysozyme （Lyz）, implying a highly selective recognition ability of the BMIP-coated GO-QDs to BSA. This enhanced fluorescent nanoscale device may provide opportunities to develop a system that is efficient and effective and has potential in the design of highly effective fluorescent receptor for recognition of target protein in Droteomics studies.展开更多
A simple chemical-etching approach is used to prepare the silicon carbide quantum dots (QDs). The raw materials of silicon carbide (SiC) with homogeneous nanoparticles fabricated via self-propagating combustion synthe...A simple chemical-etching approach is used to prepare the silicon carbide quantum dots (QDs). The raw materials of silicon carbide (SiC) with homogeneous nanoparticles fabricated via self-propagating combustion synthesis are corroded in mixture etchants of nitric and hydrofluoric acid. After sonication and chromatography in the ultra-gravity field for the etched products, aqueous solution with QDs can be obtained. The microstructure evolution of raw particles and optical properties of QDs were measured. Different organophilic groups on the surface like carboxyl, oxygroup, and hyfroxy were produced in the process of etching. Fluorescent labeling and imaging for living cells of Aureobasidium pulluans were investigated. The results indicated that SiC QDs were not cytotoxic and could stably label due to the conjugation between organophilic groups of QDs and specific protein of cells, it can be utilized for fluorescent imaging and tracking cells with in vivo and long-term-distance. Moreover, mechanism and specificity of mark were also analyzed.展开更多
Electrospun porous films doped with the green-synthesized CdSe quantum dots were synthesized. Glycerol was chosen to prepare the quantum dots （ QDs）, with the highest quantum yield of 78.28%. Polycaprolactone （PCL...Electrospun porous films doped with the green-synthesized CdSe quantum dots were synthesized. Glycerol was chosen to prepare the quantum dots （ QDs）, with the highest quantum yield of 78.28%. Polycaprolactone （PCL） was electrospun with CdSe QDs to avoid the QDs＇ toxicity and improve the QDs＇ cytocompatibility. The electrospun QDs-doped films preserve the original QDs＇ fluorescence. Pores can be detected from the SEM of the films, predicting the possibility of loading drugs in the cancer therapy. The cell proliferation assay shows excellent cytocompatibility of the eletrospun CdSe-QDs-doped films. The present eletrospun CdSe- QDs-doped porous films are cytocompatibale, highly-fluorescent and ootential to load drugs in cancer therapy.展开更多
A novel quantum dots （QDs） optical fiber amplifier was proposed and demonstrated. It was fabricated by dipcoating the PbSe QDs doped sol onto the taper region of fiber coupler. The PbSe QDs was synthesized according...A novel quantum dots （QDs） optical fiber amplifier was proposed and demonstrated. It was fabricated by dipcoating the PbSe QDs doped sol onto the taper region of fiber coupler. The PbSe QDs was synthesized according to a colloidal method. A lower refractive index sol was also synthesized as the host of PbSe QDs. A standard single mode fiber was used to make the fusion tapered fiber coupler which had double input and output ports. With the simple structure, a signal and a pump can be injected into the amplifier and excite the PbSe QDs through evanescent wave. The experimental results indicated that the amplified light wave was observed at 1 550 nm wavelength with 980 nm .wavelength laser diode as pump.展开更多
Novel CdTe/CdS quantum dots(QDs)coated with a hybrid of SiO_2 and ZnS were fabricated through a simple two-step approach.The hybrid SiO_2/ZnS coated CdTe/CdS quantum dots was characterized by transmission electron mic...Novel CdTe/CdS quantum dots(QDs)coated with a hybrid of SiO_2 and ZnS were fabricated through a simple two-step approach.The hybrid SiO_2/ZnS coated CdTe/CdS quantum dots was characterized by transmission electron microscopy(TEM),UV and fluorescence spectrometer.Results indicated that the core-shell structure gave the QDs outstanding photoluminescence properties,includinganarrowphotoluminescencespectrum,high photoluminescence(PL)quantum yield and long emission lifetime(average PL lifetime of increased from 26.4 ns to 49.1 ns).Cellular studies showed the QDs had good cytocompatibility with Hela cells as determined by the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide(MTT)assay after coating SiO_2/ZnS,and also proved the feasibility of using the hybrid SiO_2/ZnS coated QDs as optical probes for in vitro cell imaging.The synthesis method of QDs is highly promising for the production of robust and functional optical probes for bio-imaging and sensing applications.展开更多
文摘Semiconductor quantum dots(QDs) were used for labeling many biomacromolecules and small molecules,but it remains a challenge to couple it with short active peptides without any limitation,which play critical roles in many physiological processes.Several coupling methods known about QDs and short peptides have some limitations.In this research,we report a method for the synthesis of QDs labeled peptides to be appropriate to any short peptide.The QDs(CdTe)-labeled short peptides were verified and characterized by RP-HPLC.The result shows that the surface of the T cell treated with QDs-TP5 emits yellow fluoresence.These results indicate that QDs-TP5 tends to aggregate on the surface of T cells.They were applied to monitoring the specific binding between the immune peptides and T cell surface receptors.The binding and the resultant fluorescence were observed and monitored by fluorescence microscope in vitro.The QDs-labeled immune peptides provide a powerful method for studying the immune modulating activity of TP5 in vivo.
基金Project supported by the National Natural Science Foundation of China (No. 30672017)the Swedish Foundation for Strategic Research (SSF)
文摘This paper reported an efficient and rapid method to produce highly monodispersed CdSe quantum dots (QDs), in which the traditional trioctylphosphine oxide (TOPO) was replaced by paraffin liquid as solvent and oleic acid as the reacting media. The experimental conditions and the properties of QDs had been studied in detail. The resulting samples were confirmed of uniform size distribution with transmission electronic microscopy (TEM), while UV-vis absorption and photoluminescence (PL) spectra clearly indicated that such synthesized QDs had good fluorescence properties.
基金supported by the Sichuan Science and Technology Program under Grant No.2018JY0084
文摘The 1.55-μm quantum-dot (QD) micropillar cavities are strongly required as single photon sources (SPSs) for silica-fiber-based quantum information processing. Theoretical analysis shows that the adiabatic distributed Bragg reflector (DBR) structure may greatly improve the quality of a micropillar cavity. An InGaAsP/InP micropillar cavity is originally difficult, but it becomes more likely usable with inserted tapered (thickness decreased towards the center) distributed DBRs. Simulation turns out that, incorporating adiabatically tapered DBRs, a Si/SiO2- InP hybrid micropillar cavity, which enables weakly coupling InAs/InP quantum dots (QDs), can even well satisfy strong coupling at a smaller diameter. Certainly, not only the tapered structure, other adiabatic designs, e.g., both DBR layers getting thicker and one thicker one thinner, also improve the quality, reduce the diameter, and degrade the fabrication difficulty of Si/SiO2-InP hybrid micropillar cavities. Furthermore, the problem of the thin epitaxial semiconductor layer can also be greatly resolved by inserting adiabatic InGaAsP/InP DBRs. With tapered DBRs, the InGaAsP/InP-air-aperture micro-pillar cavity serves as an efficient, coherent, and monolithically producible 1.55-μm single-photon source (SPS). The adiabatic design is thus an effective way to obtain prospective candidates for 1.55-μm QD SPSs.
基金Supported by the Funding Project for Academic Human Resources Development in Higher Learning Institution Under the Jurisdiction of Beijing Municipality,China(No.PHR201006110)the Innovative Team Project of Beijing Education Committee,China(No.PHR201107116)
文摘The cytotoxicity and DNA damage caused by thioglycolic acid（TGA）-capped cadmium telluride（CdTe） quantum dots（QDs） to hepatocyte line HL-7702 were investigated.Cell viability was measured by 3-（4,5-dimethylthiazol-2-yl）-2,5-diphenyltetrazolium bromide（MTT） assay;DNA damage was detected by single cell gel electrophoresis（SCGE）;the change of cell cycle progression was examined by propidium iodide（PI）-flow cytometry（FCM）;apoptosis was measured by acridine orange/ethidium bromide（AO/EB） assay and Annexin V-FITC/PI-FCM（FITC：fluorescein isothiocyanate）.The results show that the cytotoxicity induced by CdTe QDs was increased in a dose-dependent and time-dependent manner;after exposure to QDs for 24 h,as the exposure dose increased,the rate of DNA damage was significantly increased（P0.05）,and the degree of DNA damage was elevated.As the dose of CdTe QDs increased,the percentage of G 0 /G 1 phase cells was significantly decreased（P0.001）,while the percenttages of S and G 2 /M phases cells were significantly increased（P0.001）.In AO/EB assay,apoptotic cells could be observed under a fluorescence microscope,and apoptotic rate was increased as exposure dose increased.In Annexin V-FITC/PI-FCM assay,the apoptotic rates of CdTe QDs treated groups were significantly increased compared with that of control group（P0.05）.Our studies indicate that CdTe QDs could influence cell viability,and induce DNA damage,the S and G2 /M phases arrest and apoptosis of HL-7702.
文摘In this work the enhanced molecularly imprinted optosensing material based on graphene oxide-quantum dots （ GO- QDs） was synthesized for highly selective and sensitive specific recognition of the target protein, bovine serum albumin （BSA）. Here, GO was introduced to enhance the efficiency of mass-transfer in recognition of target protein. Molecularly imprinted polymer coated GO-QDs using BSA as template （BMIP-coated GO-QDs ） exhibited a fast mass-transfer speed, which could be ascribed to the high volume of efficient surface area and high target recognition efficiency of the synthesized nanoscale device. Under optimal conditions, it was found that the BSA as target protein could remarkably quench the relative fluorescence intensity of BMIP- coated GO-QDs linearly in a concentration-dependent manner that was best described by a Stern-Volmer equation. The Ksv （Stern- Volmer constant） for template BSA was much higher than bovine hemoglobin （BHb） and lysozyme （Lyz）, implying a highly selective recognition ability of the BMIP-coated GO-QDs to BSA. This enhanced fluorescent nanoscale device may provide opportunities to develop a system that is efficient and effective and has potential in the design of highly effective fluorescent receptor for recognition of target protein in Droteomics studies.
文摘A simple chemical-etching approach is used to prepare the silicon carbide quantum dots (QDs). The raw materials of silicon carbide (SiC) with homogeneous nanoparticles fabricated via self-propagating combustion synthesis are corroded in mixture etchants of nitric and hydrofluoric acid. After sonication and chromatography in the ultra-gravity field for the etched products, aqueous solution with QDs can be obtained. The microstructure evolution of raw particles and optical properties of QDs were measured. Different organophilic groups on the surface like carboxyl, oxygroup, and hyfroxy were produced in the process of etching. Fluorescent labeling and imaging for living cells of Aureobasidium pulluans were investigated. The results indicated that SiC QDs were not cytotoxic and could stably label due to the conjugation between organophilic groups of QDs and specific protein of cells, it can be utilized for fluorescent imaging and tracking cells with in vivo and long-term-distance. Moreover, mechanism and specificity of mark were also analyzed.
基金Shanghai Leading Academic Discipline Project,China，Shanghai Key Laboratory Project,China，Doctoral Fund of Ministry of Education of China，National Natural Science Foundation of China
文摘Electrospun porous films doped with the green-synthesized CdSe quantum dots were synthesized. Glycerol was chosen to prepare the quantum dots （ QDs）, with the highest quantum yield of 78.28%. Polycaprolactone （PCL） was electrospun with CdSe QDs to avoid the QDs＇ toxicity and improve the QDs＇ cytocompatibility. The electrospun QDs-doped films preserve the original QDs＇ fluorescence. Pores can be detected from the SEM of the films, predicting the possibility of loading drugs in the cancer therapy. The cell proliferation assay shows excellent cytocompatibility of the eletrospun CdSe-QDs-doped films. The present eletrospun CdSe- QDs-doped porous films are cytocompatibale, highly-fluorescent and ootential to load drugs in cancer therapy.
基金Project supported by the Innovation Program of Shanghai Municipal Education Commission (Grant No.10YZ12)the Science and Technology of Commission of Shanghai Municipality (Grant No.0952nm06800)the Shanghai Leading Academic Discipline Project (Grant No.S30108)
文摘A novel quantum dots （QDs） optical fiber amplifier was proposed and demonstrated. It was fabricated by dipcoating the PbSe QDs doped sol onto the taper region of fiber coupler. The PbSe QDs was synthesized according to a colloidal method. A lower refractive index sol was also synthesized as the host of PbSe QDs. A standard single mode fiber was used to make the fusion tapered fiber coupler which had double input and output ports. With the simple structure, a signal and a pump can be injected into the amplifier and excite the PbSe QDs through evanescent wave. The experimental results indicated that the amplified light wave was observed at 1 550 nm wavelength with 980 nm .wavelength laser diode as pump.
基金The Fundamental Research Funds for the Central Universities,China(No.2232015D3-15)Shanghai Natural Science Foundation,China(No.14ZR1401300)“111 Project”Biomedical Textile Materials Science and Technology,China(No.B07024)
文摘Novel CdTe/CdS quantum dots(QDs)coated with a hybrid of SiO_2 and ZnS were fabricated through a simple two-step approach.The hybrid SiO_2/ZnS coated CdTe/CdS quantum dots was characterized by transmission electron microscopy(TEM),UV and fluorescence spectrometer.Results indicated that the core-shell structure gave the QDs outstanding photoluminescence properties,includinganarrowphotoluminescencespectrum,high photoluminescence(PL)quantum yield and long emission lifetime(average PL lifetime of increased from 26.4 ns to 49.1 ns).Cellular studies showed the QDs had good cytocompatibility with Hela cells as determined by the 3-(4,5-dimethyl-2-thiazolyl)-2,5-diphenyl-2-H-tetrazolium bromide(MTT)assay after coating SiO_2/ZnS,and also proved the feasibility of using the hybrid SiO_2/ZnS coated QDs as optical probes for in vitro cell imaging.The synthesis method of QDs is highly promising for the production of robust and functional optical probes for bio-imaging and sensing applications.
