Central region coarse grains and centerline segregation are common defects in aluminum ingots fabricated by direct chill(DC)casting.A double cooling field was introduced into the DC casting process to reduce these def...Central region coarse grains and centerline segregation are common defects in aluminum ingots fabricated by direct chill(DC)casting.A double cooling field was introduced into the DC casting process to reduce these defects,whereby the external cooling was supplied by the mold and water jets,and intercooling was achieved by inserting a rod of the same alloy into the molten pool along the central axis of the ingot.Rather than forming a good metallurgical interface during solid-liquid compound casting,in the present work,the purpose of inserting the rod is to enforce internal cooling and consequently decrease the sump depth.Moreover,the insertion provides more nucleation sites with the unmoltenα-Al particles.The structure and the macrosegregation of 2024 Al alloy ingots prepared by DC casting with and without the inserts were investigated.Results show that when the inserting position is 50 mm above the upper edge of the graphite ring,significant grain refinement in the central region of the ingot and a reduced centerline segregation are achieved.展开更多
基金financially supported by the Natural Science Foundation of Liaoning Province(Nos.2019-ZD-0002,2019KF-0503)the Fundamental Research Funds for the Central Universities(Nos.N2002025,N2109006)the National Natural Science Foundation of China(No.51674078)。
文摘Central region coarse grains and centerline segregation are common defects in aluminum ingots fabricated by direct chill(DC)casting.A double cooling field was introduced into the DC casting process to reduce these defects,whereby the external cooling was supplied by the mold and water jets,and intercooling was achieved by inserting a rod of the same alloy into the molten pool along the central axis of the ingot.Rather than forming a good metallurgical interface during solid-liquid compound casting,in the present work,the purpose of inserting the rod is to enforce internal cooling and consequently decrease the sump depth.Moreover,the insertion provides more nucleation sites with the unmoltenα-Al particles.The structure and the macrosegregation of 2024 Al alloy ingots prepared by DC casting with and without the inserts were investigated.Results show that when the inserting position is 50 mm above the upper edge of the graphite ring,significant grain refinement in the central region of the ingot and a reduced centerline segregation are achieved.
