A Review of the Application of Process Evaluation in Junior High School English Teaching under “Double Reduction”

The “Double Reduction” policy is not only to reduce the excessive learning burden of students, but also to improve the quality of students’ learning and to promote their overall development. In order to achieve the goal of the “Double Reduction” policy, it is necessary to focus on the implementation of measures to strengthen process evaluation as proposed in the “General Plan for Deepening Education Evaluation Reform in a New Era”. Therefore, the article will analyze the current situation of the research from three aspects: the connotation of “Double Reduction” and process evaluation, process evaluation under “Double Reduction” and process evaluation in English teaching, and look forward to the future development trend, with the aim of implementing the “Double Reduction” policy and giving full play to process evaluation. The aim is to implement the policy of “Double Reduction” and give full play to the role of process evaluation, so as to effectively guide the practice of English teaching.

A Giant Granuloma of the Vocal Process after Double-Lumen Bronchial Catheter Insertion: A Rare Case Report and Literature Review

Background: Double-lumen endotracheal (DLT) is commonly used for one-lung ventilation and lung separation during thoracic surgery. There are case reports of medically induced laryngeal granulomas, mainly in patients after single-lumen endotracheal (SLT) tube intubation and tracheotomy, and giant granulomas of the vocal cords due to double-lumen bronchial tube insertion have rarely been reported. Case presentation: A 49-year-old female patient underwent single-port thoracoscopy after DLT intubation as well as a wedge resection of the lower lobe of the left lung, which caused giant vocal process granulomas (VPGs) postoperatively. Based on a retrospective analysis of the general condition, current medical history, past medical history, and visual laryngoscopic observation of the vocal folds tissue, which ruled out preoperative vocal fold granuloma formation, we hypothesized that double-lumen bronchial catheter intubation may have been the primary cause of her vocal fold granuloma formation. Conclusions: Giant granuloma of the vocal folds after DLT insertion is a rare postoperative complication;therefore, if DLT intubation is to be performed, the anesthesiologist should choose an appropriate intubation plan and deal with it promptly to avoid the risk factors to ensure that the patient’s perioperative period is safe and smooth. In addition, if postoperative complications are encountered, they should be followed up and observed on time.

Numerical simulation of dynamic thermal process during doublesided asymmetrical TIG backing welding of large thick plates

The dynamic thermal process during double-sided asymmetrical TIG backing welding of large thick plates （ 1 000 mm×700 mm×50 mm） is numerically simulated using MSC. MARC. The effect of arc distance on the thermal cycle in weld zone during double-sided asymmetrical T1G backing welding is investigated. The results show that the workpiece experiences double-peak thermal cycle in double-sided asymmetrical TIG backing welding. On the one hand, the fore arc has the pre- heating effect on the rear pass, and the pre-heating temperature depends on the distance between the double arcs, the heat input of fore arc, and the initial temperature of workpiece. On the other hand, the rear arc has the post-heating effect on the fore pass. The mutual effects of two heat sources decrease with the increase of arc distance.

High performance RE–Fe–B sintered magnets with high-content misch metal by double main phase process

Double main phase process is applied to fabricate [(Pr, Nd)1 – xMMx]13.8FebalM1.5B5.9 (x = 0.5 and 0.7;M = Cu, Al, Co, and Nb) sintered magnets with high misch metal (MM) content. In comparison to the magnets by single main phase process, the enhanced magnetic properties have been achieved. For magnets of x = 0.7, Hcj increases to 371.9 kA/m by 60.5%, and (BH)max is significantly enhanced to 253.3 kJ/m3 by 56.9%, compared with those of the single main phase magnets of the same nominal composition. In combination with minor loops and magnetic recoil curves, the property improvement of magnets with double main phase method is well explained. As a result, it is demonstrated that double main phase technology is an effective approach to improve the permanent magnetic properties of MM based sintered magnets.

Reinforced temperature control of a reactive double dividing-wall distillation column

The mass and thermal coupling makes the control of the reactive double dividing-wall distillation column(R-DDWDC) an especially challenging issue with a highly interactive nature. With reference to the separation of an ideal endothermic quaternary reversible reaction with the most unfavorable ranking of relative volatilities(A + B ■ C + D with α_(A)>α_(C)>α_(D)>α_(B)), the operation rationality of the R-DDWDC is studied in this contribution. The four-point single temperature control system leads to great steady-state discrepancies in the compositions of products C and D and the reason stems essentially from the failure in keeping strictly the stoichiometric ratio between reactants A and B. A temperature plus temperature cascade control scheme is then employed to reinforce the stoichiometric ratio control and helps to secure a substantial abatement in the steady-state discrepancies. A temperature difference plus temperature cascade control scheme is finally synthesized and leads even to better performance than the most effective double temperature difference control scheme. These outcomes reveal not only the operation feasibility of the R-DDWDC but also the general significance of the proposed temperature difference plus temperature cascade control scheme to the inferential control of any other complicated distillation columns.

A Double Shot Noise Process and Its Application in Insurance

The authors consider a compound Cox model of insurance risk with the additional economic assumption of a positive interest rate. As the authors note a duality result relating a compound Cox model of insurance risk with a positive interest rate and a double shot noise process, the authors analyze a double shot noise process systematically for its theoretical distributional properties, based on the piecewise deterministic Markov process theory, and the martingale methodology. The authors also obtain the moments of aggregate accumulated/discounted claims where the claim arrival process follows a Cox process with shot noise intensity. Removing the parameters in a double shot noise process gradually, the authors show that it becomes a compound Cox process with shot noise intensity, a single shot noise process and a compound Poisson process. Numerical comparisons are shown between the moments （i.e. means and variances） of a compound Poisson model and their counterparts of a compound Cox model with/without considering a positive interest rate. For that purpose, the authors assume that claim sizes and primary event sizes follow an exponential distribution, respectively.

Boosting Peroxymonosulfate Activation via Co-Based LDH-Derived Magnetic Catalysts:A Dynamic and Static State Assessment of Efficient Radical-Assisted Electron Transfer Processes

Heterogeneous catalysts promoting efficient production of reactive species and dynamically stabilized electron transfer mechanisms for peroxomonosulfates(PMS)still lack systematic investigation.Herein,a more stable magnetic layered double oxides(CFLDO/N-C),was designed using self-polymerization and high temperature carbonization of dopamine.The CFLDO/N-C/PMS system effectively activated PMS to remove 99%(k=0.737 min^(-1))of tetracycline(TC)within 10 min.The CFLDO/N-C/PMS system exhibited favorable resistance to inorganic anions and natural organics,as well as satisfactory suitability for multiple pollutants.The magnetic properties of the catalyst facilitated the separation of catalysts from the liquid phase,resulting in excellent reproducibility and effectively reducing the leaching of metal ions.An electronic bridge was constructed between cobalt(the active platform of the catalyst)and PMS,inducing PMS to break the O-O bond to generate the active species.The combination of static analysis and dynamic evolution confirmed the effective adsorption of PMS on the catalyst surface as well as the strong radical-assisted electron transfer process.Eventually,we further identified the sites where the reactive species attacked the TC and evaluated the toxicity of the intermediates.These findings offer innovative insights into the rapid degradation of pollutants achieved by transition metals in SR-AOPs and its mechanistic elaboration.

Surface alloying of Cu with Ti by double glow discharge process

The surface of pure copper alloyed with Ti using double glow discharge process was investigated. The morphology, structure and forming mechanism of the Cu-Ti alloying layer were analyzed. The microhardness and wear resistance of the Cu-Ti alloying layer were measured, and compared with those of pure copper. The results indicate that the surface of copper activated by Ar and Ti ions bombardment is favorable to absorption and diffusion of Ti element. In current experimental temperature, as the Ti content increases, the liquid phase occurs between the deposited layer and diffused layer, which makes the Ti ions and atoms easy to dissolve and the thickness of Cu-Ti alloying layer increase rapidly. After cooling, the structure of the alloying layer is composed of CuTi, Cu4Ti and （Cu（Ti）） solid solution. The solid solution strengthening and precipitation strengthening effects of Ti result in high surface hardness and wear resistance.

Hybrid Micro-forming Processes and Quality Evaluation of Micro-double Gear

Micro-gear is an important actuating component used widely in the micro electro mechanical systems(MEMS) devices.The technologies of micro-forming and precision assembly are urgently developed to manufacture the micro-double gear with central shaft.In the paper,a novel hy-brid-forming process with two kinds of piercing method have been proposed to manufacture the micro-double gear using micro forming technology.The tests of hybrid forming process were carried out with two steps and the micro-double gear was successfully manufactured with good surface quality.The results also show that the hybrid micro-forming process with central piercing method can improve the defects of inclining shaft generated by double-ended piercing method.The quality evaluation of micro-double gear was conducted with surface roughness,micro-hardness and impact tests.The results show that the micro-double gear with good mechanical properties can meet the requirements of application for milli-machines.

Penetration mechanism of aluminum alloy in double-sided GTAW process

The penetration mechanism of aluminum alloy in double-sided gas tungsten arc welding (GTAW) process was probed by means of theoretical analysis, experimentation and numerical simulation. The results show that, firstly, the welding current goes straight through the weld zone, forms a stronger electromagnetic force field, and causes a stronger fluid flow in the weld pool. Secondly, during double-sided GTAW process, when the weld is partial penetrated, a heat-congregated zone forms between the bottoms of the two weld pools, where the temperature can increase quickly even though only a small amount of heat is input. Thirdly, the buoyancy force causes an inward flow in the bottom weld pool, which can drive the hot liquid on the surface to the bottom of the pool.

Comparative Analysis between Triple Cross and Double Cross among Three Parents of Crop

In this paper, the triple cross and double cross were compared by analysing the characteristics of genetic variation in progeny of triple cross hybrid and double cross hybrid among three parents, based on the successful breeding practices of Beijing No.10. The results showed that the selection duration of double cross was one year shorter than that of triple cross. The F1 generations of single cross hybrids of double cross showed higher breeding value, and the multiple cross-ing timing of triple cross was more flexible. More wheat varieties have been bred by triple cross, instead of double cross. Moreover, the double cross has a disad-vantage of heavy workload.

An Incursion of Off-Equatorial Subsurface Cold Water and Its Role in Triggering the “Double Dip” La Nia Event of 2011

Based on Global Ocean Data Assimilation System （GODAS） and NCEP reanalysis data, atmospheric and oceanic pro- cesses possibly responsible for the onset of the 2011/12 La Nifia event, which followed the 2010/11 La Nifia even--referred to as a ＂double dip＂ La Nifia--are investigated. The key mechanisms involved in activating the 2011/12 La Nifia are illus- trated by these datasets. Results show that neutral conditions were already evident in the equatorial eastern Pacific during the decaying phase of the 2010/11 La Nifia. However, isothermal analyses show obviously cold water still persisting at the surface and at subsurface depths in off-equatorial regions throughout early 2011, being most pronounced in the tropical South Pacific. The negative SST anomalies in the tropical South Pacific acted to strengthen a southern wind across the equator. The subsurface cold water in the tropical South Pacific then spread northward and broke into the equatorial region at the thermo- cline depth. This incursion process of off-equatorial subsurface cold water successfully interrupted the eastern propagation of warm water along the equator, which had previously accumulated at subsurface depths in the warm pool during the 2010/11 La Nifia event. Furthermore, the incursion process strengthened as a result of the off-equatorial effects, mostly in the tropical South Pacific. The negative SST anomalies then reappeared in the central basin in summer 2011, and acted to trigger local coupled air-sea interactions to produce atmospheric-oceanic anomalies that developed and evolved with the second cooling in the fall of 2011.

Local Measurement of Gas-Liquid Bubbly Flow with a Double-Sensor Probe

A double-sensor probe was used to measure local interfacial parameters of a gas-liquid bubbly flow in a horizontal tube. The parameters included void fraction, interfacial concentration, bubble size distribution, bubble frequency and bubble interface velocity. The authors paid special attention to the probe design and construction for minimizing measurement errors. Measures were also taken in the design of sensor ends for preventing corrosions in the flow. This is an effort to improve the current double-sensor probe technique to meet the ever-increasing needs to local parameter measurements in gas-liquid two-phase flows.

Relocation of the 1998 Zhangbei-Shangyi earthquake sequence using the double difference earthquake location algorithm

On January 10, 1998, at 11h50min Beijing Time (03h50min UTC), an earthquake of ML=6.2 occurred in the border region between the Zhangbei County and Shangyi County of Hebei Province. This earthquake is the most significant event to have occurred in northern China in the recent years. The earthquake-generating structure of this event was not clear due to no active fault capable of generating a moderate earthquake was found in the epicentral area, nor surface ruptures with any predominate orientation were observed, no distinct orientation of its aftershock distribution given by routine earthquake location was shown. To study the seismogenic structure of the Zhangbei- Shangyi earthquake, the main shock and its aftershocks with ML3.0 of the Zhangbei-Shangyi earthquake sequence were relocated by the authors of this paper in 2002 using the master event relative relocation technique. The relocated epicenter of the main shock was located at 41.145癗, 114.462癊, which was located 4 km to the NE of the macro-epicenter of this event. The relocated focal depth of the main shock was 15 km. Hypocenters of the aftershocks distributed in a nearly vertical plane striking 180~200 and its vicinity. The relocated results of the Zhangbei-Shangyi earthquake sequence clearly indicated that the seismogenic structure of this event was a NNE-SSW-striking fault with right-lateral and reverse slip. In this paper, a relocation of the Zhangbei-Shangyi earthquake sequence has been done using the double difference earthquake location algorithm (DD algorithm), and consistent results with that obtained by the master event technique were obtained. The relocated hypocenters of the main shock are located at 41.131癗, 114.456癊, which was located 2.5 km to the NE of the macro-epicenter of the main shock. The relocated focal depth of the main shock was 12.8 km. Hypocenters of the aftershocks also distributed in a nearly vertical N10E-striking plane and its vicinity. The relocated results using DD algorithm clearly indicated that the seismogenic structure of this event was a NNE-striking fault again.

Simulation of the plasticizing behavior of composite modified doublebase(CMDB)propellant in grooved calendar based on adaptive grid technology

The frequent occurrence of safety accidents during the calendering process is caused by the flammable and explosive properties of composite modified double-base(CMDB)propellant.Optimization of process parameters with the aid of fluid simulation technology could effectively ensure the safety of the calendering process.To improve the accuracy of the simulation results,material parameters and model structure were corrected based on actual conditions,and adaptive grid technology was applied in the local mesh refinement.In addition,the rheological behavior,motion trajectories and heat transfer mechanisms of CMDB propellant slurry were studied with different gaps,rotational rates and temperatures of two rollers.The results indicated that the refined mesh could significantly improve the contour clarity of boundaries and simulate the characteristics of CMDB propellant slurry reflux movement caused by the convergent flow near the outlet.Compared with the gap,the increased rotational rate of roller could promote the reflux movement and intensify the shear flow of slurry inside the flow region by viscous shear dragging.Meanwhile,under the synergistic effect of contact heat transfer as well as convective heat exchange,heat accumulated near the outlet and diffused along the reflux movement,which led to the countercurrent heat dissipation behavior of CMDB propellant slurry.The plasticizing mechanism of slurry and the safety of calendering under different conditions were explored,which provided theoretical guidance and reference data for the optimization of calendering process conditions.Based on the simulation results,the safety of the CMDB propellant calendering process could be significantly improved with a few tests conducted during a short research and development cycle.

基于Double Deep Q Network的无人机隐蔽接敌策略

基于深度强化学习的连续状态空间无人机隐蔽接敌问题,提出了基于马尔可夫决策过程的隐蔽接敌双深度Q网络(DDQN)方法。利用DDQN生成目标值函数的方法解决了传统DQN的过拟合问题;采用按优先级随机抽样的方法获取训练样本,加速了神经网络的训练速度;设定贪婪系数按照指数下降的方法,解决了传统强化学习的“探索利用窘境”;在势函数奖赏函数设计中引入角度因子,使其更加符合实际作战情况。仿真实验结果表明,DDQN具有较好的收敛性,能有效生成隐蔽接敌策略。

Comparative Study of Earing Behavior in Cold Rolled-batch Annealed and Cold Rolled-Continuous Annealed of DoubleReduced (DR) Tinplate Steels

Two double cold reduction-drawn and redrawn(DRD) tinplate steels of the same chemistries that have been processed by continuous and batch annealing line have been researched. The composition of fibers were studied through X-ray diffraction. The results indicate that a strong intensity of {114}<110> was formed in the continuous annealing steel and a strong intensity of {111}<112> was formed in the batch annealing steel; not only that but the γ fiber slowly rotated to the low angel α fiber with the angel being about 30° nearly {112}<110>texture owing to the higher second reduction.

Lattice-Preferred orientations of olivine in subducting oceanic lithosphere derived from the observed seismic anisotropies in double seismic zones

Subduction zones can generally be classified into Mariana type and Chilean type depending on plate ages, plate thicknesses, subduction angles, back-arc deformation patterns, etc. The double seismic zones （DSZs） in sub- duction zones are mainly divided into type I and type II which, respectively, correspond to the Mariana type and Chilean type in most cases. Seismic anisotropy is an important parameter characterizing the geophysical fea- tures of the lithosphere, including the subduction zones, and can be described by the two parameters of delay time ~t and fast wave polarization direction ~b. We totally col- lected 524 seismic anisotropy data records from 24 DSZs and analyzed the statistical correlations between seismic anisotropy and the related physical parameters of DSZs. Our statistical analysis demonstrated that the fast wave polarization directions are parallel to the trench strike with no more than 30~ for most type I DSZs, while being nearlyperpendicular to the trench strike for type II DSZs. We also calculated roughly linear correlations that the delay time 6t increases with dip angles but decreases with subduction rates. A linear equation was summarized to describe the strong correlation between DSZ＇s subduction angle DSZ and seismic anisotropy in subduction zones. These results suggest that the anisotropic structure of the subducting lithosphere can be described as a possible equivalent crystal similar to the olivine crystal with three mutually orthogonal polarization axes, of which the longest and the second axes are nearly along the trench-perpendicular and trench-parallel directions, respectively.

Qualitative Properties and Numerical Solution of the Kolmogorov-Fisher Type Biological Population Task with Double Nonlinear Diffusion

In the present work we study the global solvability of the Kolmogorov-Fisher type biological population task with double nonlinear diffusion and qualitative properties of the solution of the task based on the self-similar analysis. In additional, in this paper we consider the model of two competing population with dual nonlinear cross-diffusion.

An Overview of Double JPEG Compression Detection and Anti-detection

JPEG(Joint Image Experts Group)is currently the most widely used image format on the Internet.Existing cases show that many tampering operations occur on JPEG images.The basic process of the operation is that the JPEG file is first decompressed,modified in the null field,and then the tampered image is compressed and saved in JPEG format,so that the tampered image may be compressed several times.Therefore,the double compression detection of JPEG images can be an important part for determining whether an image has been tampered with,and the study of double JPEG compression anti-detection can further advance the progress of detection work.In this paper,we mainly review the literature in the field of double JPEG compression detection in recent years with two aspects,namely,the quantization table remains unchanged and the quantization table is inconsistent in the double JPEG compression process,Also,we will introduce some representative methods of double JPEG anti-detection in recent years.Finally,we analyze the problems existing in the field of double JPEG compression and give an outlook on the future development direction.