Copolymerization of propylene oxide (PO) and ethylene oxide (EO) using double metal cyanide (DMC) complex as the catalyst was carried out. The structure of random copolymers was confirmed by C-13-NMR and IR spectra. H...Copolymerization of propylene oxide (PO) and ethylene oxide (EO) using double metal cyanide (DMC) complex as the catalyst was carried out. The structure of random copolymers was confirmed by C-13-NMR and IR spectra. H-1-NMR analysis shows that the EO content in the copolymer is the same as that in the initial monomer feed. Moderate molecular weight copolymers with various EO content were obtained and their values of molecular weight distribution (MWD) fell in the range of 1.21-1.55. It was found that the molecular weight of copolymers is controlled by the mass ratio of EO+PO to initiator moles used, The reaction rate as well as polymer yield decrease with increasing EO content in the feed composition.展开更多
Various novel double metal cyanide （DMC） catalysts were successfully prepared by modifying the central metal （M） and one of cyanide ion （CN-） in Zna[M（CN）b]c complex. Such modifications have significant impact...Various novel double metal cyanide （DMC） catalysts were successfully prepared by modifying the central metal （M） and one of cyanide ion （CN-） in Zna[M（CN）b]c complex. Such modifications have significant impact on the catalytic efficiency as well as the polymer selectivity for the reaction of PO/CO2. Zn-Ni（Ⅱ） DMC is a potential catalyst for alternating copolymerization of PO/CO2,and DMC catalysts based on Zn3[Co（CN）5X]2 （X = Br^- and N3^-） exhibit moderate efficiency for the production of polycarbonates.This research presents the preliminary exploration of novel DMC complex via chemical modification of its central metal and ligand.展开更多
Highly active calcium chloride（CaCl2） doped Zn-Co^Ⅲdouble metal-cyanide（Ca-DMC） catalysts were firstly reported.Ca-DMCs presented a very higher polymer yield（54 kg polymer/g catalyst） at relative low temperatur...Highly active calcium chloride（CaCl2） doped Zn-Co^Ⅲdouble metal-cyanide（Ca-DMC） catalysts were firstly reported.Ca-DMCs presented a very higher polymer yield（54 kg polymer/g catalyst） at relative low temperature（80-115℃） toward ringopening polymerization（ROP） of propylene oxide（PO） than did DMC catalysts without modification.展开更多
The effects of organic ethers such as diethyl ether, ethylene glycol diethyl ether and diethyl glycol diethyl ether on the structure of double metal cyanide complex catalyst and the structural changes of such catalyst...The effects of organic ethers such as diethyl ether, ethylene glycol diethyl ether and diethyl glycol diethyl ether on the structure of double metal cyanide complex catalyst and the structural changes of such catalyst in the process of propylene oxide polymerization were investigated by EXAFS. The results show that Co in all DMC catalysts is still coordinated by six cyanogens, while Zn is coordinated by O atom in organic complex. The more numerous the number of the ether bond, the higher the coordination numbers of O to Zn ion, the more active the catalyst we make. Five or six O atoms coordinated Zn ion may be the real active center in the process of propylene oxide polymerization.展开更多
文摘Copolymerization of propylene oxide (PO) and ethylene oxide (EO) using double metal cyanide (DMC) complex as the catalyst was carried out. The structure of random copolymers was confirmed by C-13-NMR and IR spectra. H-1-NMR analysis shows that the EO content in the copolymer is the same as that in the initial monomer feed. Moderate molecular weight copolymers with various EO content were obtained and their values of molecular weight distribution (MWD) fell in the range of 1.21-1.55. It was found that the molecular weight of copolymers is controlled by the mass ratio of EO+PO to initiator moles used, The reaction rate as well as polymer yield decrease with increasing EO content in the feed composition.
基金the National Natural Science Foundation of China(No.50273031)China Postdoctoral Science Foundation(No.20060400339).
文摘Various novel double metal cyanide （DMC） catalysts were successfully prepared by modifying the central metal （M） and one of cyanide ion （CN-） in Zna[M（CN）b]c complex. Such modifications have significant impact on the catalytic efficiency as well as the polymer selectivity for the reaction of PO/CO2. Zn-Ni（Ⅱ） DMC is a potential catalyst for alternating copolymerization of PO/CO2,and DMC catalysts based on Zn3[Co（CN）5X]2 （X = Br^- and N3^-） exhibit moderate efficiency for the production of polycarbonates.This research presents the preliminary exploration of novel DMC complex via chemical modification of its central metal and ligand.
基金the financial supports of the National Science Foundation of the People's Republic of China(No.20704034)Provincial Natural Science Foundation of Zhejiang(No.Y4090047)
文摘Highly active calcium chloride（CaCl2） doped Zn-Co^Ⅲdouble metal-cyanide（Ca-DMC） catalysts were firstly reported.Ca-DMCs presented a very higher polymer yield（54 kg polymer/g catalyst） at relative low temperature（80-115℃） toward ringopening polymerization（ROP） of propylene oxide（PO） than did DMC catalysts without modification.
文摘The effects of organic ethers such as diethyl ether, ethylene glycol diethyl ether and diethyl glycol diethyl ether on the structure of double metal cyanide complex catalyst and the structural changes of such catalyst in the process of propylene oxide polymerization were investigated by EXAFS. The results show that Co in all DMC catalysts is still coordinated by six cyanogens, while Zn is coordinated by O atom in organic complex. The more numerous the number of the ether bond, the higher the coordination numbers of O to Zn ion, the more active the catalyst we make. Five or six O atoms coordinated Zn ion may be the real active center in the process of propylene oxide polymerization.
