Sound Transmission Loss Analysis of a Double Plate-Acoustic Cavity Coupling System with In-Plane Functionally Graded Materials

In this paper, the isogeometric analysis (IGA) is employed to develop an acoustic radiation model for a double plate-acoustic cavity coupling system, with a focus on analyzing the sound transmission loss (STL). The functionally graded (FG) plate exhibits a different material properties in-plane, and the power-law rule is adopted as the governing principle for material mixing. To validate the harmonic response and demonstrate the accuracy and convergence of the isogeometric modeling, ANASYS is utilized to compare with numerical examples. A plane wave serves as the acoustic excitation, and the Rayleigh integral is applied to discretize the radiated plate. The STL results are compared with the literature, confirming the reliability of the coupling system. Finally, the investigation is conducted to study impact of cavity depth and power-law parameter on the STL.

Increase of brightness and transmission efficiency in fiat panel display through serial synchronous scanning mode with double buffers

This paper presents a serial synchronous scanning mode in fiat panel display （FPD） by adding a latch buffer between the serializer and the driving buffer. Comparing with conventional techniques, the proposed structure can efficiently reduce the brightness loss and improve the transmission performance. Theoretical analysis and experimental results show that the ratio between the lightest weight display time and the relative transmission time is a tradeoff between brightness loss and transmission efficiency.

Reflection and transmission properties of double submerged rectangular blocks

An analytic method is used to study the reflection and transmission coefficients of the double submerged rectangular blocks （DSRBs） in oblique waves. The scattering potentials are obtained by means of the eigenfunction expansion method, and expressions for the reflection and transmission coefficients are determined. The boundary element method is employed to verify the correctness of the present analytical method. The DSRBs have better performance than the single submerged rectangular block （SSRB） in certain cases. The reflection and transmission properties of the DSRBs are investigated for some specific cases, and the influences of the geometric parameters are also presented.

Effects of fabricated error on transmission performance of double layer frequency selective surface configuration

Based on the experimental results, in which the fabricated error of the double layer frequency selective surface (FSS) leads to the transmission loss and the resonant frequency leaves away the design resonant frequency, the inter-layer separation distance (ISD) and the unit cell aligning error (UAE) were used as main variables to study the transmission performance attenuation of the double layer FSS configuration. The numerical analysis model for ISD and UAE was established and also was used to simulate the ring unit cell FSS transmission performance by the finite element and periodic moment methods. The double layer ring aperture FSS configuration designed was used as the numerical model. As a result of the numerical analysis, it is shown that both ISD and UAE produce insertion transmission loss (ITL) and insertion phase distortion (IPD) directly. Furthermore, ISD results in more loss of the amplitude of the transmitted signal for the FSS than UAE. It is significant for the designer of the multiplayer FSS to assign the fabricated error of the FSS dielectric layers. The UAE introduces the insertion phase variation badly.

Power transmission through double-walled laminated composite panels considering porous layer-air gap insulation

The acoustic behavior of double-walled laminated composite panels consisting of two porous and air gap middle layers is studied within the classical laminated plate theory （CLPT）. Thus, viscous and inertia coupling in a dynamic equation, as well as stress transfer, thermal and elastic coupling of porous material ave based on the Biot theory. In addition, the wave equations are extracted according to the vibration equation of composite layers. The transmission loss （TL） of the structure is then calculated by solving these equations simultaneously. Statistical energy analysis （SEA） is developed to divide the structure into specific subsystems, and power transmission is extracted with balancing power flow equations of the subsystems. Comparison between the present work and the results reported elsewhere shows excellent agreement. The results also indicate that, although favorable enhancement is seen in noise control particularly at high frequencies, the corresponding parameters associated with fluid phase and solid phase of the porous layer are important on TL according to the boundary condition interfaces. Finally, the influence of composite material and stacking sequence on power transmission is discussed.

Process Analysis of Double Circuit Transmission Line Trip-out on the Same Tower Due to Lightning

In recent years,several failures of double circuit transmission line on the same tower due to lightning were happened in Beijing power grid.Although it can be reclosed successful,the lightning strike caused a grave threat to the power grid security.The cause of the accident and the accident process were studied for the sake of further understanding of the impact of lightning on power grid.As an example,110 kV double circuit transmission line(Xilong-line) was analyzed.At first,the system topology was given.Through the analysis on relay protection actions and the fault recorder data,over voltage on the insulator strings was calculated.Based on the analysis and the calculation,accident cause and the process were presented respectively.Secondly,it comes to the conclusion that the lightning failure was caused by counterattack.The wave of the lightning over voltage would spread to the not grounded neutral point of the transformers,and make the neutral protective gap breakdown,then cause freewheeling with the frequency of 50 Hz.As results of the relay protection,the double circuit transmission line all tripped out.Finally,the causes of the accident were proposed that included terrain features,large corner towers,strong thunderstorm weather and poor grounded contact of the tower.

Double transmission peaks electromagnetically induced transparency induced by simultaneously exciting the electric and magnetic resonance in one unit cell

In this paper, we investigate a metamaterial formed by a planar array of a metallic L-shaped structure and a cut wire(CW), which behaves as an analogue of the electromagnetically induced transparency(EIT). The double transmission peaks are formed by the destructive interference of two bright-modes and a quasi-dark mode. The two bright-modes are respectively excited by the L-shaped structure and CW. The unit structure itself performs a quasi-dark mode. The group refractive indexes are over 20 in the first transmission peak, and 117 in the second transmission peak, thus offering potential applications in slow light devices. Finally, all the above characteristics are achieved in just one simple unit cell.

Fault location of two-parallel transmission line for double phase-to-earth fault using one-terminal data

An accurate algorithm for fault location of double phase-to-earth fault on transmission line of direct ground neutral system is presented. The algorithm, which employs the faulted phase network and zero-sequence network as fault-location model in which the source impedance at the remote end is not involved, ef-fectively eliminates the effect of load flow and fault resistance on the accuracy of fault location. The algorithm achieves accurate location by measuring only one local end data and is used in a procedure that provides automatic determination of faulted types and phases, and does not require the engineer to specify them. Simulation results showed the effectiveness of the algorithm under the condition of double phase-to-earth fault.

Role of localised surface plasmon polaritons coupling in optical transmission through double-layer metal apertures

In this paper, we investigate the optical properties of the double-layer metal films perforated with single apertures by analysing the coupling of localized surface plasmon polaritons （LSPPs）. It is found that the amplitude and the wavelength of transmission peak in such a structure can be adjusted by changing the longitudinal interval D between two films and the lateral displacements dx and dy which are parallel and perpendicular to the polarization direction of incident light, respectively. The variation of longitudinal interval D results in the redshift of transmission peak due to the change of coupling strength of LSPPs near the single apertures. The amplitude of transmission peak decreases with the increase of dy and is less than that in the case of dx, which originates from the difference in coupling manner between LSPPs and the localized natures of LSPPs.

A Novel Fault Location Algorithmfor Double-Circuit Transmission Lines based on Distributed Parameter

Anewfault location algorithmfor double-circuit transmissionlines is described inthis paper.Theproposed method uses data extractedfromtwo ends of the transmissionlines andthus eliminates the effects ofthe source impedance andthe fault resistance.The distributed parameter model and the modal transformationare also employed.Depending on modal transformation,the coupled equations of the lines are converted intodecoupled ones.Inthis way,the mutual coupling effects between adjacent circuits of the lines are eliminatedandtherefore an accurate fault location can be achieved.The proposed methodis tested via digital simulationusing EMTP in conjunction with MATLAB.The test results corroborate the high accuracy of the proposedmethod.

基于Double-Nakagami-m的非对称全双工AF中继车载通信系统

针对车载通信系统通信中断问题,提出基于Double-Nakagami-m的非对称全双工AF(amplify-and-forward)中继车载通信系统。全双工技术允许通信车辆节点在一个时隙内完成信息交换,AF物理层网络编码技术可降低系统解码复杂度。假设信道服从Double-Nakagami分布,为了解决车辆行驶中由于相对速度过大对系统性能产生的影响的问题,采用全双工AF中继转发车辆通信的信息,以保证该系统容量满足行驶车辆通信要求,并提高通信频谱资源使用效率。为了仿真非对称速率车载通信环境,假设不同速度的车辆进行通信,并用中断概率衡量该通信系统是否可靠。数值分析结果表明,速率非对称程度越低,系统可靠性能越好,当速率非对称程度从1/9变化至1时,系统最低中断概率减小了约5.3×10^-2,且信道衰落系数对系统性能影响比信道功率因子的影响程度要高,改变信道衰落系数可以使得系统中断概率减小至4.83×10^-5,从而提高了系统可靠性。

Development and genetic analysis of wheat double substitution lines carrying Hordeum vulgare 2H and Thinopyrum intermedium 2Ai#2 chromosomes

Thinopyrum intermedium and barley are two close relatives of wheat and carry many genes that are potentially valuable for the improvement of various wheat traits. In this study we created wheat double substitution lines by hybridizing different wheat–Th. intermedium and wheat–barley disomic alien substitution lines, with the aim of using genes in Th. intermedium and barley for wheat breeding and investigating the genetic behavior of alien chromosomes and their wheat homoeologs. As expected, we obtained two types of wheat double substitution lines,2D2Ai#2(2B)2H( A) and 2A2 Ai#2(2B)2H(2D), in which different group 2 wheat chromosomes were replaced by barley chromosome 2 H and Th. intermedium chromosome 2Ai#2. The new materials were characterized using molecular markers, genomic in situ hybridization(GISH), and fluorescent in situ hybridization(FISH). GISH and FISH experiments revealed that the double substitution lines harbor 42 chromosomes including 38 wheat chromosomes, a pair of barley chromosomes, and a pair of Th. intermedium chromosomes. Analysis using specific DNA markers showed that two pairs of wheat homoeologous group 2 chromosomes in the new lines were substituted by a pair of 2H and a pair of 2Ai#2 chromosomes. Chromosome 2H showed a higher transmission rate than 2Ai#2, and both chromosomes were preferentially transmitted between generations via female gametes. Evaluation of botanic and agronomic traits demonstrated that,compared with their parents, the new lines showed similar growth habits and plant type but differences in plant height, flowering date, and self-fertility. Cytological observations using different probes suggested that the double substitution lines showed nearly normal genetic behavior before and during meiosis. The novel substitution lines can potentially be used in wheat meiosis research and breeding programs.

Design and Dynamics Simulation of a Novel Double-Ring-Plate Gear Reducer

A patented double-ring-plate gear reducer was designed and its dynamic performance was simulated. One unique characteristic of this novel drive is that the phase angle difference between two parallelogram mechanisms is a little less than 180 degree and four counterweights on two crankshafts are designed to balance inertia forces and inertia moments of the mechanisms. Its operating principle, advantages, and design issues were discussed. An elasto-dynamics model was presented to acquire its dynamic response by considering the elastic deformations of ring-plates, gears, bearings, etc. The simulation results reveal that compared with housing bearings, planetary bearings work in more severe conditions. The fluctuation of loads on gears and bearings indicates that the main reason for reducer vibration is elastic deformations of the system rather than inertia forces and inertia moments of the mechanisms.

Liquid Level Measurement in Oil Tanks Based on Double-differential Pressure Technique

The system principle and configuration of the double differential pressure method for measuring oil tank level are presented. The fundamental method and circuit of fiber optic transmission are analyzed .The accuracy and security of level measurement in the oil tanks have been greatly improved.

液晶填充一维阶梯型Double-period结构局域模的调控特性

利用传输矩阵法研究了向列相液晶填充一维阶梯型Double-period第4代准周期结构局域模的电场方向、外界温度调控特性。通过改变电场方向和外界温度,研究该结构透射谱的调控特性。结果表明：温度一定时,液晶的有效折射率都随着夹角θ的增大而逐渐减小,局域模波长随夹角θ的增大而发生蓝移;当夹角θ接近54°时,向列相液晶的有效折射率与温度呈现近正比线性关系;夹角θ小于54°时,向列相液晶的有效折射率随温度升高而逐渐减小,局域模波长随外界温度（300~378.15K）的升高而发生蓝移;夹角θ大于54°时,随温度升高,向列相液晶的有效折射率先减小后增大,局域模波长先发生蓝移再发生红移。无论是外界温度升高还是电场方向夹角的增大,局域模的调控量始终是减小的,且局域模的调控量与液晶有效折射率差值成正比线性关系。

含液晶缺陷层的Double-period结构缺陷模的电控可调特性

采用传输矩阵法研究含一向列相液晶缺陷层的一维Double-period第五代准周期结构缺陷模的电控可调特性.计算外加电压与向列相液晶有效折射率的变化关系,数值模拟缺陷模波长的大小与外加电压的变化关系以及介质层中缺陷模波长的光场分布.结果表明:随外加电压的增大,缺陷模波长的大小向短波方向移动.介质层中缺陷模波长的光场分布呈现出局域现象,并且光场分布主要集中在缺陷层.

Study on Galloping Stability Mechanism of Conductor and Its Application to Anti-Galloping of Transmission Lines

Galloping of conductor is a major hazard to safe operation of transmission lines. This paper introduces the basic galloping stability mechanism of conductor, design method of anti-galloping and the application of anti-galloping double pendulum and integral eccentric pendulum in China. Galloping stability mechanism of conductor was established based on vertical galloping mechanism developed by Den Hartog and torsional galloping mechanism developed by O. Nigel. A design method of anti-galloping was derived and anti-galloping double pendulum and integral eccentric pendulum were developed. Applications to several transmission lines including a 500 kV transmission line of large span indicated that they have played important roles in anti-galloping.

Transport properties through double-magnetic-barrier structures in graphene

We study electrons tunneling through a double-magnetic-barrier structure on the surface of monolayer graphene. The transmission probability and the conductance are calculated by using the transfer matrix method. The results show that the normal incident transmission probability is blocked by the magnetic vector potential and the Klein tunneling region depends strongly on the direction of the incidence electron. The transmission probability and the conductance can be modulated by changing structural parameters of the barrier, such as width and height, offering a possibility to control electron beams on graphene.

特勒根似功率保护在同塔双回交流输电线路中的应用

随着我国电网规模快速扩张,输电通道资源日渐紧缺,同塔多回输电技术逐渐得到广泛应用。超/特高压远距离输电线路一般以差动保护作为双重主保护,与纵联距离/方向保护构成双重化配置。但用于同塔双回输电线路时,分布电容电流将影响差动保护的灵敏度;同时,由于双回线线间和相间较强的电磁耦合作用,线间互感的影响将会降低纵联距离、纵联方向保护判断的正确性,导致原来的保护配置方案难以直接应用。将特勒根似功率保护原理推广至同塔双回线路,提出了一种基于特勒根似功率定理的同塔双回输电线路纵联保护方法,能够不受双回线内部复杂电磁耦合、分布电容、系统负荷等影响,并验证了该保护的对时方案在双回线路中的适用性。采用MATLAB/Simulink仿真软件搭建1000kV特高压同塔双回输电线示范工程模型,经大量仿真实验,验证了所提保护方法的有效性。

双摆线针齿传动齿廓特性与啮合特性分析

将双摆线齿廓运用到NN型少齿差行星齿轮传动领域,通过分析内外摆线轮齿廓的凹凸性、曲率和曲率半径,获得了内、外摆线齿廓的特性;通过图解法推导双摆线针齿传动中内、外摆线轮的压力角计算公式,获得了啮合过程压力角变化规律,以及双摆线针齿主要参数对于内、外摆线轮压力角的影响;通过对等距修形和移距修形进行研究,表明齿廓修形对齿形有明显影响。