通过对BPZ 220/5 W JA55型阳光球泡灯进行额定功率下40℃和60℃温度应力加速寿命实验,分析了该款LED球泡灯的失效机理.通过推导激活能计算公式,建立了计算光衰激活能的理论模型,给出了测试LED球泡灯光衰激活能方法.通过实验测定该款球...通过对BPZ 220/5 W JA55型阳光球泡灯进行额定功率下40℃和60℃温度应力加速寿命实验,分析了该款LED球泡灯的失效机理.通过推导激活能计算公式,建立了计算光衰激活能的理论模型,给出了测试LED球泡灯光衰激活能方法.通过实验测定该款球泡灯的光衰激活能数值为0.67 eV.展开更多
In order to meet the requirements of indoor illumination, a LED daylight lamp model was designed, it can replace traditional fluorescent lamp without insteading additional power supply establishment. The optical prope...In order to meet the requirements of indoor illumination, a LED daylight lamp model was designed, it can replace traditional fluorescent lamp without insteading additional power supply establishment. The optical properties of the model were simulated using optical analysis software. Its luminous efficiency is about 30.4 lm/W, and the illuminance is about 38 lux when the distance is 1.5 m between the center of the model and measured spot. With the theoretically-optimized design of LED model, experiments based on the results of the optimal simulation in the laboratory were conducted to verify the performance of the proposed LED model, it reaches a power factor of about 0.8 at 6 W. The simulation results are very similar with the measured values. It is testified that simulative method is one of the effective tools for LED lighting optical design.展开更多
The Rwandan State-run Energy Water and Sanitation Authority Company (EWSA) is rapidly increasing the number of population having access to electrical power energy. 30% of electrical energy is used in lighting. The inc...The Rwandan State-run Energy Water and Sanitation Authority Company (EWSA) is rapidly increasing the number of population having access to electrical power energy. 30% of electrical energy is used in lighting. The incandescent bulbs, compact fluorescent lamp bulbs as well as fluorescent tubes are mostly used to convert electrical energy into light. The said light sources have many disadvantages such as excessive power consumption leading to giant bills of electricity, short life span leading to continuous replacement of lamps, and emission of CO2. Application of light-emitting diode (LED) lamps in lighting in long term suppresses the aforementioned problems resulting into saving of money that will be used for running new small investments.展开更多
The purpose of this paper is to present a methodology for optimizing the geometry of the LED （light emitting diode） secondary lens. The research objective is to uniform the illumination distribution on a target plan...The purpose of this paper is to present a methodology for optimizing the geometry of the LED （light emitting diode） secondary lens. The research objective is to uniform the illumination distribution on a target plane for nonimaging application. In order to achieve this, a software that simulates ray tracing is used, in conjunction with a heuristic process for enhancing the optimized parameters that form the geometry of the LED secondary lens. Spherical lenses was opted for optimization due to its lower manufacture complexity.展开更多
基金Key Scientific and Technological Research Projects of Henan Province(072102240027) Doctor Foundationof Henan Polytechnic University(648602)Postgraduate Degree Thesis Innovation Foundation of Henan Polytechnic University(644005)
文摘In order to meet the requirements of indoor illumination, a LED daylight lamp model was designed, it can replace traditional fluorescent lamp without insteading additional power supply establishment. The optical properties of the model were simulated using optical analysis software. Its luminous efficiency is about 30.4 lm/W, and the illuminance is about 38 lux when the distance is 1.5 m between the center of the model and measured spot. With the theoretically-optimized design of LED model, experiments based on the results of the optimal simulation in the laboratory were conducted to verify the performance of the proposed LED model, it reaches a power factor of about 0.8 at 6 W. The simulation results are very similar with the measured values. It is testified that simulative method is one of the effective tools for LED lighting optical design.
文摘The Rwandan State-run Energy Water and Sanitation Authority Company (EWSA) is rapidly increasing the number of population having access to electrical power energy. 30% of electrical energy is used in lighting. The incandescent bulbs, compact fluorescent lamp bulbs as well as fluorescent tubes are mostly used to convert electrical energy into light. The said light sources have many disadvantages such as excessive power consumption leading to giant bills of electricity, short life span leading to continuous replacement of lamps, and emission of CO2. Application of light-emitting diode (LED) lamps in lighting in long term suppresses the aforementioned problems resulting into saving of money that will be used for running new small investments.
文摘The purpose of this paper is to present a methodology for optimizing the geometry of the LED （light emitting diode） secondary lens. The research objective is to uniform the illumination distribution on a target plane for nonimaging application. In order to achieve this, a software that simulates ray tracing is used, in conjunction with a heuristic process for enhancing the optimized parameters that form the geometry of the LED secondary lens. Spherical lenses was opted for optimization due to its lower manufacture complexity.
