Research on Transmission Line Tower Tilting and Foundation State Monitoring Technology Based onMulti-Sensor Cooperative Detection and Correction

The transmission line tower will be affected by bad weather and artificial subsidence caused by the foundation and other factors in the power transmission.The tower’s tilt and severe deformation will cause the building to collapse.Many small changes caused the tower’s collapse,but the early staff often could not intuitively notice the changes in the tower’s state.In the current tower online monitoring system,terminal equipment often needs to replace batteries frequently due to premature exhaustion of power.According to the need for real-time measurement of power line tower,this research designed a real-time monitoring device monitoring the transmission tower attitude tilting and foundation state based on the inertial sensor,the acceleration of 3 axis inertial sensor and angular velocity raw data to pole average filtering pre-processing,and then through the complementary filtering algorithm for comprehensive calculation of tilt angle,the system meets the demand for inclined online monitoring of power line poles and towers regarding measurement accuracy,with low cost and power consumption.The optimization multi-sensor cooperative detection and correction measured tilt angle result relative accuracy can reach 1.03%,which has specific promotion and application value since the system has the advantages of unattended and efficient calculation.

The Integrated System of Aerial Photogrammetry and Tower Locations Optimization for Transmission Lines

This paper describes the functions and the features of the integrated system of aerial survey and tower locations optimization for transmission lines, which includes all stages from data acquisition, data transmission and data processing to automatic optimization of the tower locations and drawing. The paper also briefly describes the economic benefit gained from this system, and finally proposes the directions of the future development for this system.

The changing process and trend of ground temperature around tower foundations of Qinghai-Tibet Power Transmission line

After the construction of Qinghai-Tibet Highway and Railway, the Qinghai-Tibet Power Transmission(QTPT) line is another major permafrost engineering project with new types of engineering structures. The changing process and trend of ground temperature around tower foundations are crucial for the stability of QTPT. We analyzed the change characteristics and tendencies of the ground temperature based on field monitoring data from 2010 to 2014. The results reveal that soil around the tower foundations froze and connected with the artificial permafrost induced during the construction of footings after the first freezing period, and the soil below the original permafrost table kept freezing in subsequent thawing periods. The ground temperature lowered to that of natural fields, fast or slowly for tower foundations with thermosyphons,while for tower foundations without thermosyphons, the increase in ground temperature resulted in higher temperature than that of natural fields. Also, the permafrost temperature and ice content are significant factors that influence the ground temperature around tower foundations. Specifically, the ground temperature around tower foundations in warm and ice-rich permafrost regions decreased slowly, while that in cold and ice poor permafrost regions cooled faster. Moreover, foundations types impacted the ground temperature, which consisted of different technical processes during construction and variant of tower footing structures. The revealed changing process and trend of the ground temperature is beneficial for evaluating the thermal regime evolution around tower foundations in the context of climate change.

Dynamic Analysis of Overhead Transmission Lines under Turbulent Wind Loading

Transmission tower-line systems are designed using static loads specified in various codes. This paper compares the dynamic response of a test transmission line with the response due to static loads given by Eurocode. Finite element design software SAP2000 was used to model the towers and lines. Non-linear dynamic analysis including the large displacement effects was carried out. Macroscopic aspects of wind coherence along element length and integration time step were investigated. An approach is presented to compare the probabilistic dynamic response due to 7 different stochastically simulated wind fields with the response according to EN-50341. The developed model will be used to study the response recorded on a test line due to the actual wind speed time history recorded. It was found that static load from EN overestimated the strength of conductor cables. The response of coupled system considering towers and cables was found to be different from response of only cables with fixed supports.

Process Analysis of Double Circuit Transmission Line Trip-out on the Same Tower Due to Lightning

In recent years,several failures of double circuit transmission line on the same tower due to lightning were happened in Beijing power grid.Although it can be reclosed successful,the lightning strike caused a grave threat to the power grid security.The cause of the accident and the accident process were studied for the sake of further understanding of the impact of lightning on power grid.As an example,110 kV double circuit transmission line(Xilong-line) was analyzed.At first,the system topology was given.Through the analysis on relay protection actions and the fault recorder data,over voltage on the insulator strings was calculated.Based on the analysis and the calculation,accident cause and the process were presented respectively.Secondly,it comes to the conclusion that the lightning failure was caused by counterattack.The wave of the lightning over voltage would spread to the not grounded neutral point of the transformers,and make the neutral protective gap breakdown,then cause freewheeling with the frequency of 50 Hz.As results of the relay protection,the double circuit transmission line all tripped out.Finally,the causes of the accident were proposed that included terrain features,large corner towers,strong thunderstorm weather and poor grounded contact of the tower.

Dynamic Responses of Long-Span Transmission Tower-Line System Subjected to Broken Wires

A macroscopic finite element modeling approach was proposed to calculate the vibration of a tower-line system subjected to broken wires with software ANSYS/LS-DYNA. In the finite element model, not only the nonlinearity of wires and suspension insulators are considered, but also the support towers are included. The incremental and iterative approaches are combined by applying the unbalanced loads incrementally during each iteration cycle. The approach was illustrated with an example of a Hanjiang- River long-span transmission line system subjected to a shield wire and a conductor failure, respectively. The analysis results showed that the proposed dynamic simulation approach can demonstrate the kinetic process of the tower-line system subjected to wire ruptures： The frequencies of line components were lower and densely distributed, but the frequencies of tower components were higher and sparsely distributed. Anyhow, the dynamic effects of wire ruptures on tower-line system could not be ignored in analysis of tower-line system subjected wire failures.

Evaluating transmission towers potentials during ground faults

During ground faults on transmission lines,a number of towers near the fault are likely to acquire high potentials to ground.These tower voltages,if excessive,may present a hazard to humans and animals.This paper presents analytical methods in order to determine the transmission towers potentials during ground faults,for long and short lines.The author developed a global systematic approach to calculate these voltages,which are dependent of a number of factors.Some of the most important factors are:magnitudes of fault currents,fault location with respect to the line terminals,conductor arrangement on the tower and the location of the faulted phase,the ground resistance of the faulted tower,soil resistivity,number,material and size of ground wires.The effects of these factors on the faulted tower voltages have been also examined for different types of power lines.

Fault location of untransposed double-circuit transmission lines based on an improved Karrenbauer matrix and the QPSO algorithm

Some double-circuit transmission lines are untransposed,which results in complex coupling relations between the parameters of the transmission lines.If the traditional modal transformation matrix is directly used to decouple the parameters,it can lead to large errors in the decoupled modal parameter,errors which will be amplified in the fault location equation.Consequently,it makes the fault location results of the untransposed double-circuit transmission lines less accurate.Therefore,a new modal transformation method is needed to decou-ple the parameter matrix of untransposed double-circuit transmission lines and realize the fault location according to the decoupled modal parameter.By improving the basis of the Karrenbauer matrix,a modal transformation matrix suitable for decoupling parameters of untransposed double-circuit transmission lines is obtained.To address the dif-ficulties in solving the fault location equation of untransposed double-circuit transmission lines,a new fault location method based on an improved Karrenbauer matrix and the quantum-behaved particle swarm optimization(QPSO)algorithm is proposed.Firstly,the line parameter matrix is decomposed into identical and inverse sequence compo-nents using the identical-inverse sequence component transformation.The Karrenbauer matrix is then transformed to obtain the improved Karrenbauer matrix for untransposed double-circuit transmission lines and applied to identi-cal and inverse sequence components to solve the decoupled modal parameter.Secondly,based on the principle that voltage magnitudes at both ends are equal,the fault location equation is expressed using sequence compo-nents at each end,and the QPSO algorithm is introduced to solve the equation.Finally,the feasibility and accuracy of the proposed method are verified by PSCAD simulation.The simulation results fully demonstrate that the innova-tive improvement on the basis of the traditional modal transformation matrix in this paper can realize the modal transformation of the complex coupling parameters of the untransposed double-circuit transmission lines.It causes almost no errors in the decoupling process.The QPSO algorithm can also solve the fault location equation more accu-rately.The new fault location method can realize the accurate fault location of untransposed double-circuit transmis-sion lines.

颗粒阻尼器对输电塔线系统减震性能研究

对输电塔线系统进行缩尺模型振动台实验,从时域和频域的角度,对比了调谐质量阻尼器和颗粒阻尼器对输电塔的减震效果。利用ABAQUS建立了颗粒阻尼器控制输电塔线系统的离散元-有限元高精度耦合数值模型,对比了实验和模拟结果,并对塔线系统的耗能情况及颗粒阻尼器内部颗粒运动碰撞情况进行分析。研究结果表明:在地震激励下,颗粒阻尼器的减震效果较调谐质量阻尼器有更好的鲁棒性;该文所建立的颗粒阻尼器控制输电塔线系统模型能够良好地反映试件的动力特性和地震响应;在颗粒阻尼器的控制下,塔线系统总能量降低24.12%。当颗粒之间的碰撞次数和颗粒与容器的碰撞次数满足一定比例关系时,颗粒阻尼器能实现更优的控制效果。

Statistical Analysis of Radio Interference of 1000 kV UHV AC Double-circuit Transmission Lines in Foul Weather

Analyzing the impact of radio interference(RI)variation during foul weather conditions is an area that has received limited study.This paper provides a statistical analysis of RI measurements obtained from a long-term observation station close to the world’s first commercially operating 1000 kV UHV AC double-circuit transmission line in China.During six months of observations,the impact of RI was studied on the line during fog,drizzle,and light snow and rain.It was found that RI increases linearly with the natural logarithm of the precipitation intensity.The Levenberg-Marquardt algorithm(LMA)is employed to fit the RI value with the precipitation intensity.The reasonable distribution of RI in different foul weather is verified by one-sample K-S test.This test is seen as beneficial for further RI prediction based on statistical weather mode.

台风灾害输电线路杆塔脆弱性与风险评估:以浙江省为例

台风大风可导致输电线路杆塔断裂倒塌等事故,影响电力系统运行安全,因而台风灾害输电线路杆塔风险评估具有重要意义。以浙江省全域杆塔为例,基于杆塔属性、地理信息及台风灾情资料,提出了一种基于“超额损失”的针对连续型和离散型变量的输电线路台风灾害杆塔脆弱性评估模型;利用68 a台风参数风场再分析数据,基于极值理论,建立了台风大风危险性评估模型;基于区域灾害系统理论,通过台风大风、杆塔脆弱性之间耦合分析,建立了台风输电线路杆塔风险评估模型。结果显示:台风大风危险性呈从东南向西北递减态势,随重现期增大呈非线性增大趋势,以20和100 a一遇极大风速为例,浙江省全域风速强度分别为23.5~50.9和32.6~68.9 m/s;台风影响下的杆塔综合脆弱性总体呈南高北低且与地形联系紧密的分布态势,脆弱性高值(>1)区域主要在浙中南和沿海地区;输电线路杆塔风险总体呈南高北低、沿海高内陆低的特点,局部差异性较大。应根据具体线路特点采取差异性较大的抗风策略。

服役输电线路风致响应及寿命预测分析

庞大的输电系统是国家最重要的基础设施之一,确保其在长期风荷载作用下的安全性和可靠性,是应该重视的关键问题。采用Abaqus建立了输电塔线体系的精细化有限元模型,对风荷载进行了模拟,考虑受压杆件失稳,通过动力计算方法分析了塔线体系响应并据此确定了其薄弱位置。进一步地,以薄弱杆件的应力时程为指标,基于Miner线性准则描述的损伤规律,采用雨流法预测了不同风速下塔线体系的寿命;随后研究了风荷载模拟关键参数对结构预测寿命的影响,对线路进行整体上的评估。结果表明:以构件失效作为塔线体系结构整体破坏的准则,可为塔线体系的寿命预测提供一定的参考;结构的预测寿命主要由薄弱构件(变坡处主材)控制;此外,风荷载模拟参数对预测寿命有较大影响,持时不同预测寿命差距较大,Kaimal谱模型预测寿命比随机Fourier谱更偏于保守;粗糙长度与预测寿命负相关。

随机脉动风场作用下输电塔线体系的动力响应分析

输电杆塔及塔线体系(简称塔线体系)是整个电力系统中输电环节的核心部分,沿海地区的强风对塔线体系有着重要影响。为研究在随机脉动风场作用下塔线体系的动力响应特性,文中以广东某地区的1W2C9型鼓型自立式输电杆塔为研究对象,建立输电杆塔的单塔及一塔两线的塔线耦联有限元模型,结合Davenport风速谱与四阶自回归法模拟具有空间相关性的单塔9节点及塔线体系49节点的脉动风场,研究在此脉动风场下的单塔及塔线体系的动力响应,并探究不同风向角对其动力响应的影响。研究结果表明:单塔及塔线体系的动力响应最大值大于其拟静力响应;由于塔线耦联效应的存在,输电线会增加塔线体系的稳定性,降低其动力响应;90°是输电杆塔单塔及塔线体系动力响应的最不利风向角。

土-岩组合地基变截面锚杆承载性能与机制研究

以山区输电线路工程为背景,针对实践中广泛遇到的上土下岩二元层状地基,提出了一种变截面锚杆技术,其原理为通过增大上覆土层中锚杆的截面积,达到充分利用上覆土层和下部岩层承载力的目的。为检验变截面锚杆的性能,采用现场真型试验和数值模拟相结合的手段,探讨了其承载力提升机制,分析了不同因素对承载特性的影响规律。研究表明,较等截面锚杆,变截面锚杆的上拔、下压以及水平承载力均有所提升。其中,水平承载性能提升效果最显著。场地覆土层厚度对锚杆上拔承载力影响较大,对下压和水平承载性能影响较小。场地地形坡度对锚杆水平承载性能有较大影响,二者呈负相关。此外,“上拔荷载+水平荷载”模式下,变截面群锚基础的承载性能优于等截面群锚基础和传统复合基础,且具有土方开挖量小以及更适用于斜坡地形的优点。研究成果可为该新型基础的推广应用提供技术支撑。

基于BP-Adaboost算法的输电塔-线结构整体可靠性分析

针对传统结构可靠性分析方法的应用局限性和计算成本较大等不足,引入BP-Adaboost集成学习算法,提出一种准确高效、简单易行的输电塔线结构整体可靠性分析方法。首先,建立输电塔线结构有限元分析模型,分析结构的失效准则并推导相应的极限状态功能函数;然后,将BP-Adaboost集成学习算法与蒙特卡洛模拟方法相结合,建立高精度预测模型来替代分析过程复杂的有限元模型,提出基于BP-Adaboost模型的输电塔线结构整体可靠性分析方法;最后,通过数值算例对所提方法进行应用与验证,证明所提方法具有更高的精度和效率,并进一步将其应用于实际输电塔线结构工程,分析多失效模式下输电塔线结构的整体可靠性。

海岛大跨越输电塔线体系风振响应及动力失稳分析

跨海输电塔线体系具有铁塔高、跨度大、风速大、恢复困难等特点,是岛屿电网的关键薄弱位置,尤其受台风等灾害天气影响严重,为进一步认识跨海输电塔线体系的风振响应特点和强风作用下的铁塔风致失稳特征,以温州洞头某线路典型跨海段(耐—直—直—耐)线路为研究对象,采用ABAQUS软件建立该跨海段两塔三线有限元分析模型。首先分析导线、裸塔及塔线体系的动力特性参数,然后开展不同风向角下的风振响应分析及位移风振系数计算,最后,采用增量动力分析方法(incrementaldynamicanalysis,IDA)模拟强风作用下考虑塔线耦合效应的铁塔非线性倒塌过程。研究表明:大跨越导线、地线对输电塔在不同风向角下的风振响应影响存在差异,0°风向角下,大跨越导线、地线增大体系的阻尼,降低风振响应;90°风向角下,大跨越导线、地线在横向风作用下产生较大面外位移,增大塔线体系的风振响应;强风作用下,输电塔斜材相较于主材更容易发生动力失稳,引起结构内力重分布,使得塔身中上部受力集中,最终导致输电塔发生渐进式倒塌。

强风作用下带横隔面输电塔动力响应及破坏机理研究

增设横隔面是对输电塔结构进行抗风加固的一种简单有效方式,但增设横隔面后输电塔的动力稳定性变化和破坏机理差异尚未明晰。以某220 kV同塔双回线路ZY2输电塔为研究对象,通过建立输电塔线耦联体系有限元模型,对比了增设横隔面前后的单塔及塔线体系的模态差异,验证了在靠近塔腿节间的交叉斜材处增设横隔面对于输电塔局部振型的抑制作用。采用随机风场模拟,计算不同风速下不同塔段处斜材增设横隔面前后轴力响应变化,结合动力不稳定区域理论计算斜材动力稳定性参数,将其与动力不稳定区域绘制在同一参数平面内并根据某一风速下斜材是否进入动力不稳定区域,来判断不同塔段处斜材增设横隔面前后的失稳风速。结果表明,合理增设横隔面最高可将杆塔破坏风速提高3 m/s。

特高压重冰区地线支架脱冰动力响应安全性研究

为了探究特高压重冰区输电塔地线支架在脱冰动力荷载作用下的安全性,基于脱冰数值计算理论,建立了地线的脱冰数值模型和塔线耦合数值模型,研究了地线在不同工况下的脱冰动力响应和不同地线脱冰情况下铁塔地线支架的承载力安全性。脱冰研究表明:地线脱冰时,高差越大,脱冰产生的上拔力越大;档距越大,纵向不平衡张力越大;覆冰越厚,地线脱冰产生的纵向不平衡张力越大,产生的的上拔力越小。塔线耦合脱冰研究表明:多档模型下,地线脱冰时,悬垂直线塔地线支架正面和底部斜材存在应力比超限情况,现有设计方法偏于不安全;耐张塔地线支架不受脱冰动力响应控制。建议重覆冰区地线支架设计时仅考虑地线脱冰产生的上拔力影响,上拔力取地线最大使用张力的1.0%~5.0%,覆冰越厚,上拔荷载可越小,厚度为20 mm、30 mm、40 mm、50 mm、60 mm冰区的上拔荷载分别取为最大使用张力的4.0%~5.0%、3.0%~4.0%、2.5%~3.0%、2.0%~2.5%和1.0%~2.0%。

±1100 kV特高压输电塔线体系风振响应分析

为研究角度风下长横担输电塔线体系动力响应,采用有限元时程方法分析准东—华东±1100 kV特高压输电线路单塔及塔线体系风振响应。首先,利用线性滤波法计算得到三维脉动风速场,并结合准定常理论得到单塔及输电塔线体系脉动风荷载。其次,建立单塔及输电塔线体系有限元模型,利用模态分析方法计算结构的动力特性,研究导地线及长横担结构对输电塔动力特性的影响。最后,利用有限元时程方法对单塔及塔线体系进行动力分析,研究了风向角、长横担结构及塔线耦合效应等因素对结构动力响应的影响。结果表明:长横担结构会导致扭转频率降低,扭转振型出现顺序前移;塔线耦合效应降低了塔架结构自振频率,提高了结构阻尼比;根据位移均值计算结果,最不利风向角为15°和75°;根据扭转角均方根计算结果,最不利风向角为0°;单塔顺风向响应主要受背景分量和1阶振型的影响,塔线体系还受到导地线低阶共振分量的影响,扭转角主要受扭转1阶振型影响。

改善同塔混压双回直流输电线路电磁环境研究

为了改善高压直流输电线路日益严重的电磁影响,提出混压双回直流输电线路布置的新方案。新方案线路布置通过改变极导线空间几何架构,重构极导线电晕后正负离子的空间分布状态来减弱直流输电线路对环境的电磁影响,研究其电磁环境具有重要意义。本文基于Kaptzov假设,运用COMSOL多物理场耦合计算了新方案和常规布置下直流线路的离子流浓度、合成电场、走廊宽度以及合成电场在不同风速下的变化。结果表明,选择合适的新布置方案可有效改善电磁环境影响,节约输电走廊资源。此外,新方案布置下直流线路特有的低值域不对称电磁环境具有优异的抗风性与稳定性。