Application of the Double-difference Relocation Method Combined with Waveform Cross-correlation on the Three Gorges Reservoir Seismicity

In this paper,we use the double difference location method based on waveform crosscorrelation algorithm for precise positioning of the Three Gorges Reservoir( TGR)earthquakes and analysis of seismic activity. First,we use the bi-spectrum cross-correlation method to analyze the seismic waveform data of TGR encrypted networks from March,2009 to December,2010,and evaluate the quality of waveform cross-correlation analysis.Combined with the waveform cross-correlation of data obtained, we use the double difference method to relocate the earthquake position. The results show that location precision using bi-spectrum verified waveform cross-correlation data is higher than that by using other types of data,and the mean 2 sig-error in EW,NS and UD are 3.2 m,3.9 m and 6.2 m,respectively. For the relocation of the Three Gorges Reservoir earthquakes,the results show that the micro-earthquakes along the Shenlongxi river in the Badong reservoir area obviously show the characteristics of three linear zones with nearly east-west direction,which is in accordance with the small faults and carbonate strata line of the neotectonic period,revealing the reservoir water main along the underground rivers or caves permeated and induced seismic activity. The stronger earthquakes may have resulted from small earthquakes through the active layers.

Analysis on Double-difference Earthquake Location and the Seismicity Pattern of the Yangjiang Earthquake Sequences

The locations of about 400 earthquakes in Yangjiang, Guangdong Province are determined using the double, difference earthquake location algorithm （DDA）. The seismicity pattern becomes concentrated from discrete grids. The rupture characteristics of the Yangjiang earthquake sequence show a conjugated distribution in NW and NE directions. The major distribution trends NE and dips NE with an angle of 30^o and a length of 30km,and the minor distribution trends NW and dips SE with an angle of 30^o and a length of 20km. The focal depth is 5km - 15km. The distribution of the Enping earthquake sequence,which is not far from Yangjiang,is NW-trending. The relationship between hypocenter distribution and geological structure is discussed.

Discussion on the Precise Relocation and Seismo-Tectonics of the Jiujiang-Ruichang Earthquake

Based on relocating the Jiujiang-Ruichang earthquake sequence which occurred on November 26, 2005 in Jiangxi Province with the double-difference （DD） algorithm and master event technique, the paper discusses the focal mechanism of the main shock （MsS.7） and the probable seismo-tectonics. The precise relocation results indicate that the average horizontal error is 0.31kin in a EW direction and 0.40kin in a NS direction, and the average depth error is 0.48kin. The focal depths vary from 8kin to 14kin, with the predominant distribution at 10kin - 12kin. The epicenter of the main shock is relocated to be 29.69^oN, 115.74^oE and the focal depth is about 10.Skin. Combining the predominant distribution of the earthquake sequence, the focal mechanism of the main shock and the tectonic conditions of N-E- and NW-strike faults growth in the seismic region, we infer that the main shock of the earthquake sequence was caused by a NW striking buried fault in the Rnichang basin. The nature of seismic faults needs to be further explored.

Research on the Accurate Location of the 2007 M_S6.4 Ning'er, Yunnan Earthquake

Five mobile digital seismic stations were set up by the Earthquake Administration of Yunnan Province near the epicenter of the main shock after the Ning＇er M6. 4 earthquake on June 3, 2007. In this paper, the aftershock sequence of the Ning＇er M6. 4 earthquake is relocated by using the double difference earthquake location method. The data is from the 5 mobile digital seismic stations and the permanent Simao seismic station. The results show that the length of the aftershock sequence is 40kin and the width is 30km, concentrated obviously at the lateral displacement area between the Pu＇er fault and the NNE-trending faults, with the majority occurring on the Pu＇er fault around the main shock. The depths of aftershocks are from 2kin to 12km, and the predominant distribution is in the depth of 8 ~ 10km. The mean depth is 7. 9kin. The seismic fault dips to the northwest revealed from the profile parallel to this aftershock sequence, which is identical to the dip of the secondary fault of the NE-trending Menglian-Mojiang fault in the earthquake area. There are more earthquakes concentrated in the northwest segment than in the southeast segment, which is perhaps related to the underground medium and faults. The depth profile of the earthquake sequence shows that the relocated earthquakes are mainly located near the Pu＇er fault and the seismic faults dip to the southwest, consistent with the dip of the west branch of the Pu＇er fault. In all, the fault strike revealed by earthquake relocations matches well with the strike in the focal mechanism solutions. The main shock is in the top of the aftershock sequence and the aftershocks are symmetrically distributed, showing that faulting was complete in both the NE and SW directions.

Accurate relocation of earthquakes in central-western China using the double-difference earthquake location algorithm

The double-difference earthquake relocation algorithm (DD algorithm) has been applied to the accurate relocation of 10057 earthquakes in the central-western China (21°-36°N, 98°-112E°) during the period of 1992-1999. In total, 79706 readings for P waves and 72169 readings for S waves were used in the relocation, and the source parameters of 6496 events were obtained. The relocation results revealed a more complete picture of the hypocentral distribution in the central-western China. In several seismic belts the relocated epicenters present a more defined lineation feature, reflecting the close correlation between the seismicity and the active tectonic structures. The relocated focal depths confirmed that most earthquakes (91 percent of the 6496 relocated events) in the central-western China were located at shallower depths not deeper than 20 km. The distribution of focal depths indicates that the seismogenic layer in the central-western China is located in the upper-mid crust with its thickness no deeper than 20 km.

The MW5.5 earthquake on August 6,2023,in Pingyuan,Shandong,China:A rupture on a buried fault

On August 6,2023,a magnitude MW5.5 earthquake struck Pingyuan County,Dezhou City,Shandong Province,China.This event was significant as no large earthquakes had been recorded in the region for over a century,and no active fault had been previously identified.This study collects 1309 P-wave arrival times and 866 S-wave arrival times from 74 seismic stations less than 200 km to the epicenter to constrain the spatial distribution of the mainshock and its 125 early aftershocks by the double difference earthquake relocation method,and selects 864 P-waveforms from 288 stations located within 800 km of the epicenter to constrain the focal mechanism solution of the mainshock through centroid moment tensor inversion.The relocation and the inversion indicate,the Pingyuan MW5.5 earthquake was caused by a rupture on a buried fault,likely an extensive segment of the Gaotang fault.This buried fault exhibited a dip of approximately 75°to the northwest,with a strike of 222°,similar to the Gaotang fault.The rupture initiated at the depth of 18.6 km and propagated upward and northeastward.However,the ground surface was not broken.The total duration of the rupture was~6.0 s,releasing the scalar moment of 2.5895×1017 N·m,equivalent to MW5.54.The moment rate reached the maximum only 1.4 seconds after the rupture initiation,and the 90%scalar moment was released in the first 4.6 s.In the first 1.4 seconds of the rupture process,the rupture velocity was estimated to be 2.6 km/s,slower than the local S-wave velocity.As the rupture neared its end,the rupture velocity decreased significantly.This study provides valuable insights into the seismic characteristics of the Pingyuan MW5.5 earthquake,shedding light on the previously unidentified buried fault responsible for the seismic activity in the region.Understanding the behavior of such faults is crucial for assessing seismic hazards and enhancing earthquake preparedness in the future.

2013年通辽M_S5.3地震及其前震序列判定

以2013年4月22日内蒙古通辽MS5.3地震为研究对象,在序列统计分析的基础上,通过HypoD D双差定位和震源机制求解,分析了之前的ML4.4地震与MS5.3地震的关系。结果表明,通辽MS5.3地震是在震中区中小地震长期平静和震前短期活动增强的背景下发生的一次中强地震;地震精确定位结果显示,通辽MS5.3地震序列整体呈NW向展布,延伸约10km,ML≥3.0余震集中发生于主震南侧约2km处;MS5.3主震和ML4.4前震的震中相距约1.8km,震源深度分别为7.208、7.089km,表明两者的震源位置比较接近,可能发生于同一断层面;震源机制结果表明,通辽MS5.3主震的震源机制为走滑型,余震震源机制类型比较凌乱,由前期的走滑为主转变为后期的正断层和逆冲型;3次较大前震的震源机制解具有一致性,均为正断层,一定程度上表现了震中区地壳介质在宏观破裂前存在明显的各向异性,具体表现为裂隙的定向排列,这种"一致性"的震兆状态在应力的进一步作用下孕育发生了主震。根据地震序列的时空分布特点和震源机制相似性,综合判定通辽MS5.3地震应为前震-主震-余震型。

2008年攀枝花6.1级地震序列精定位

利用四川和云南区域数字地震台网震相到时资料,并结合Hypo2000＋Hypo DD对2008年8月30日攀枝花MS6.1地震序列进行了定位。定位结果表明,地震序列的震中在空间上呈近SN向展布,余震密集区长度约为30km,主震震源深度约为14km。序列深度的分布范围主要为0~4、5~20km,而4~5km范围显示为明显的少震层。沿序列长轴的深度剖面显示,余震区中段存在1个不规则的少震的＂空区＂,为1955年634级地震的破裂区,该地震发生在空区的南端。分析认为,2008年8月30日攀枝花MS6.1地震是因汶川8.0级地震后的应力调整造成未破裂的小凹凸体发生破裂所致。余震密集分布区沿垂直于破裂长轴的两个剖面则显示了在其北端地震震源分布更深,且断层面向NW倾斜,与已知的红格断裂的倾向一致。

2015年阿拉善左旗M_(S)5.8地震序列研究:余震演化与发震构造

1研究背景2015年4月15日内蒙古阿拉善左旗发生M_(S)5.8地震。震中位于吉兰泰盆地内,且震中所在地区测震台站稀疏,地震监测能力较低,为此次地震的发震构造和余震演化分析带来了困难。阿拉善左旗M_(S)5.8地震距离磴口—本井断裂较近,该断裂是依据磁航资料推测的一条隐伏断裂,长约120 km,由于地表被覆盖,对于它的产状及第四纪活动特点尚不清楚。同时,对吉兰泰盆地内部结构至今了解不多。

一款无源定位系统集成式测试信号源设计

为满足某款无源定位系统功能测试的需要,设计了一款以FPGA芯片为控制核心的模拟信号源。信号源基于直接数字频率合成器(DDS)技术生成特征频段的模拟辐射信号;同时,信号源内部GPS接收模块解码自身实时位置,并通过无线通信同步传输给地面无源定位系统。比较系统对信号源位置的探测结果和GPS定位结果,可对系统定位功能进行评估和完善。结果表明特征频段(VHF、VLF/LF)信号频率抖动范围在0.1%以内,并能实现信号源位置信息秒级的同步收发,基本达到预期目标。

Aftershock sequence relocation of the 2021 M_(S)7.4 Maduo Earthquake, Qinghai, China

The 2021 Qinghai Maduo M_(S)7.4 earthquake was one of the strongest earthquakes that occurred in the Bayan Har block of the Tibetan Plateau during the past 30 years,which spatially filled in the gap of strong earthquake in the eastern section of the northern block boundary.In this study,the aftershock sequence within 8 days after the mainshock was relocated by double difference algorithm.The results show that the total length of the aftershock zone is approximately 170 km;the mainshock epicenter is located in the center of the aftershock zone,indicating a bilateral rupture.The aftershocks are mainly distributed along NWW direction with an overall strike of 285°.The focal depth profiles indicate that the seismogenic fault is nearly vertical and dips to southwest or northeast in different sections,indicating a complex geometry.There is an aftershock gap located to the southeast of the mainshock epicenter with a scale of approximately 20 km.At the eastern end of the aftershock zone,horsetaillike branch faults show the terminal effect of a large strike-slip fault.There is a NW-trending aftershock zone on the north side of the western section,which may be a branch fault triggered by the mainshock.The location of the aftershock sequence is close to the eastern section of the Kunlun Mountain Pass-Jiangcuo(KMPJ)fault.The sequence overlaps well with surface trace of the KMPJ fault.We speculate that the KMPJ fault is the main seismogenic fault of the M_(S)7.4 Maduo earthquake.

Spatiotemporal evolution of the 2021 M_(S)6.4 Yangbi earthquake sequence

Based on the seismic phase reports of the Yangbi area from January 1 to June 25,2021,and the waveform data of M≥4 earthquakes,we obtained the relocation results and focal mechanism solutions of the M_(S)6.4 Yangbi earthquake sequence using the HypoDD and CAP methods.Based on our results,our main conclusions are as follows:(1)the M_(S)6.4 Yangbi earthquake sequence is a typical foreshock-mainshock-aftershock sequence.The fore-shocks of the first two stages have the obvious fronts of migration and their migration rate increased gradually.There was no apparent front of migration during the third stage,and the occurrence of the mainshock was related to stress triggering from a M5.3 foreshock.We tentatively speculate that the rupture pattern of the Yangbi earthquake sequence conforms to the cascading-rupture model;and(2)the main fault of the M_(S)6.4 Yangbi earthquake sequence is a NW-trending right-lateral strike-slip fault.As time progressed,a minor conjugate aftershock belt formed at the northwest end of this fault,and a dendritic branching structure emerged in the southern fault segment,showing a complex seismogenic fault structure.We suggested that the fault of the Yangbi earthquake sequence may be a young sub-fault of the Weixi-Weishan fault.

The Characteristic Analysis and Seismic Triggering Study of the M6.2 and M6.1 Dayao Earthquake Sequences in 2003

The high-resolution hypocenter locations of the mainshocks on July 21 （M6.2） and October 16, 2003 （M6.1） and their aftershock sequences are determined in Dayao, Yunnan by using a double-difference earthquake location algorithm. The results show that the epicenters of the two mainshocks are very close to each other and the distribution of the aftershock sequence appears to be very linear. The distribution of the earthquake sequence is very consistent with the focal mechanism, and both mainshocks are of nearly vertical right-lateral fault. Unlike most other double earthquakes in the Yunmm area, the aftershock distribution of the M6.2 and M6.1 Dayao earthquakes does not appear to be a conjugated distribution but to be in a line, and there are some stacks in the two earthquake sequences. It can be inferred that they are all controlled by the same fault. The distribution of aftershocks is asymmetrical with respect to the mainshock location and appears to be unilateral. The aftershocks of the M6.2 mainshock centralize in the northwest of M6.2 earthquake and the aftershocks of the M6.1 earthquake are in the southeast of the mainshock, moreover, the M6.1 earthquake appears to be another rupture on the southeastern extensiou of the same fault as the M6.2 earthquake. The results of Coulomb failure static stress changes △σf show that the earthquake on July 21 （M6.2） apparently triggered the earthquake on October 16 （M6.1）, the two mainshocks have stress triggering to their off-fault aftershocks to different extents, and the M6.5 earthquake that occurred in Yao＇an in 2000 also triggered the occurrence of the two Dayao earthquakes.

复杂信号环境下的辐射源定位技术

简述了辐射源定位技术的作用、发展方向以及各种基本定位方法的优缺点。介绍了一种基于TDOA和DD进行定位的新型定位方法;该方法利用辐射源信号到达两架飞机的时间差(TDOA)和时间差的变化率(DD)来对该辐射源进行定位。

Seismic analysis of the Xiluodu reservoir area and insights into the geometry of seismogenic faults

The Xiluodu(XLD)reservoir is the second largest reservoir in China and the largest in the Jinsha River basin.The occurrence of two M>5 earthquakes after reservoir impoundment has aroused great interest among seismologists and plant operators.We comprehensively analyzed the seismicity of the XLD reservoir area using precise earthquake relocation results and focal mechanism solutions and found that the seismicity of this area was weak before impoundment.Following impoundment,earthquake activity increased significantly.The occurrence of M≥3.5 earthquakes within five years of impoundment also appear to be closely related to rapid rises and falls in water level,though this correlation weakened after five years because earthquake activity was far from the reservoir area.Earthquakes in the XLD reservoir area are clustered;near the dam(Area A),small faults are intermittently distributed along the river,while Area B is composed of multiple NW-trending left-lateral strikeslip faults and a thrust fault and Area C is composed of a NW-trending left-lateral strike-slip main fault and a nearly EWtrending right-lateral strike-slip minor fault.The geometries of the deep and the shallow parts of the NW-trending fault differ.Under the action of the NW-trending background stress field,a series of NW-trending left-lateral strike-slip faults and NE-trending thrust faults in critical stress states were dislocated due to the stress caused by reservoir impoundment.The two largest earthquakes in the XLD reservoir area were tectonic earthquakes that were directly triggered by impoundment.

P-wave velocity structure beneath reservoirs and surrounding areas in the lower Jinsha River

The lower reaches of the Jinsha River are rich in hydropower resources because of the high mountains,deep valleys,and swift currents in this area.This region also features complex tectonic structures and frequent earthquakes.After the impoundment of the reservoirs,seismic activity increased significantly.Therefore,it is necessary to study the P-wave velocity structure and earthquake locations in the lower reaches of the Jinsha River and surrounds,thus providing seismological support for subsequent earthquake prevention and disaster reduction work in reservoir areas.In this study,we selected the data of 7.670 seismic events recorded by the seismic networks in Sichuan.Yunnan,and Chongqing and the temporary seismic arrays deployed nearby.We then applied the double-difference tomography method to this data,to obtain the P-wave velocity structure and earthquake locations in the lower reaches of the Jinsha River and surrounds.The results showed that the Jinsha River basin has a complex lateral P-wave velocity structure.Seismic events are mainly distributed in the transition zones between high-and low-velocity anomalies,and seismic events are particularly intense in the Xiluodu and Baihetan reservoir areas.Vertical cross-sections through the Xiangjiaba and Xiluodu reservoir areas revealed an apparent high-velocity anomaly at approximately 6 km depth:this high-velocity anomaly plays a role in stress accumulation,with few earthquakes distributed inside the high-velocity body.After the impoundment of the Baihetan reservoir,the number of earthquakes in the reservoir area increased significantly.The seismic events in the reservoir area north of 27°N were related to the enhanced activity of nearby faults after impoundment:the earthquakes in the reservoir area south of 27°N were probably induced by additional loads(or regional stress changes),and the multiple microseismic events may have been caused by rock rupture near the main faults under high pore pressure.

Determination of Focal Depths of the MS5.8 Alxa Left Banner,Inner Mongolia Earthquake Sequence

Using the double-difference earthquake location algorithm,the deterministic method (PTD method) and the CAP seismic moment tensor inversion method,the paper selects the primary waveform data of 78 earthquakes recorded by the "China Earthquake Science Array Probe Project in the Northern Part of North South Seismic Belt ",the "China Earthquake Scientific Exploration Array Data Center"of Institute of Geophysics,China Earthquake Administration,and the Inner Mongolia Digital Seismic Network to calculate the focal depths of the mainshock and the seismic sequence of the M_S5.8 Alxa Left Banner earthquake in Inner Mongolia. The results show that the focal depth of the main shock is 20. 6 km,determined by the double-difference earthquake location method,18. 1 km by the PTD method,and 19. 2 km by the CAP method. The focal depth of the earthquake sequence calculated by the double-difference location method is larger. The deterministic method (PTD method) and double-difference location method are the methods that fit the tectonic characteristics of the seismic source area,and the CAP method is suitable for larger earthquakes.