Seismic isolation is an effective strategy to mitigate the risk of seismic damage in tunnels.However,the impact of surface-reflected seismic waves on the effectiveness of tunnel isolation layers remains under explored...Seismic isolation is an effective strategy to mitigate the risk of seismic damage in tunnels.However,the impact of surface-reflected seismic waves on the effectiveness of tunnel isolation layers remains under explored.In this study,we employ the wave function expansion method to provide analytical solutions for the dynamic responses of linings in an elastic half-space and an infinite elastic space.By comparing the results of the two models,we investigate the seismic isolation effect of tunnel isolation layers induced by reflected seismic waves.Our findings reveal significant differences in the dynamic responses of the lining in the elastic half-space and the infinitely elastic space.Specifically,the dynamic stress concentration factor(DSCF)of the lining in the elastic half-space exhibits periodic fluctuations,influenced by the incident wave frequency and tunnel depth,while the DSCF in the infinitely elastic space remain stable.Overall,the seismic isolation application of the tunnel isolation layer is found to be less affected by surface-reflected seismic waves.Our results provide valuable insights for the design and assessment of the seismic isolation effect of tunnel isolation layers.展开更多
To investigate the influence of unloading effect of a circular tunnel face on rockburst process,by innovatively combining rock drilling unloading devices and triaxial systems,the strain rockburst simulation under the ...To investigate the influence of unloading effect of a circular tunnel face on rockburst process,by innovatively combining rock drilling unloading devices and triaxial systems,the strain rockburst simulation under the entire stress path of“high initial stressþinternal unloadingþstress adjustment”(HUS test)was realized for the intact cubic red sandstone samples(100 mm×100 mm×100 mm).Comparative tests were conducted on cubic red sandstone samples with prefabricated circular holes(425 mm)under the stress path of“prefabricated circular hole+þhigh initial stress+stress adjustment”(PHS test),thereby highlighting the influence of internal unloading on rockburst failure.The test results revealed that with an increase in vertical stress,the sidewalls in both the HUS and PHS tests suffered strain rockburst failure.Compared with the PHS test,the initial failure stress in the HUS test is lower,and it is easier to induce sidewall rockbursts.This indicates that the internal unloading influences the sidewall failure,causing an obvious strength-weakening effect,which becomes more significant with an increase in buried depth.The strain rockburst failure was more severe in the HUS test owing to the influence of internal unloading.V-shaped rockburst pits were formed in the HUS tests,whereas in the PHS test,arcshaped rockburst pits were produced.It was also found that strain rockburst failure may occur only when the rock has a certain degree of rockburst proneness.展开更多
The present paper aims to establish a versatile strength theory suitable for elasto-plastic analysis of underground tunnel surrounding rock. In order to analyze the effects of intermediate principal stress and the roc...The present paper aims to establish a versatile strength theory suitable for elasto-plastic analysis of underground tunnel surrounding rock. In order to analyze the effects of intermediate principal stress and the rock properties on its deformation and failure of rock mass, the generalized nonlinear unified strength theory and elasto-plastic mechanics are used to deduce analytic solution of the radius and stress of tunnel plastic zone and the periphery displacement of tunnel under uniform ground stress field. The results show that: intermediate principal stress coefficient b has significant effect on the plastic range,the magnitude of stress and surrounding rock pressure. Then, the results are compared with the unified strength criterion solution and Mohr–Coulomb criterion solution, and concluded that the generalized nonlinear unified strength criterion is more applicable to elasto-plastic analysis of underground tunnel surrounding rock.展开更多
Rock burst in a circular tunnel under high in-situ stress conditions was investigated with a numerical method coupled the rock failure process theory (RFPA) and discontinuous deformation theory (DDA). Some numerical t...Rock burst in a circular tunnel under high in-situ stress conditions was investigated with a numerical method coupled the rock failure process theory (RFPA) and discontinuous deformation theory (DDA). Some numerical tests were carraied out to investigate the failuer patterns of circular tunnel under unloading conditions. Compared the results under loading conditions,the shapes of failure zones are more regular under the unloading conditions. The failure pat-terns in the same type of rock mass are clearly different because of non-homogeneity of the rock material. The extension of cracks shows some predictability with an increasing of in-situ stress. When the homogeneity index of rocks (m) is ei-ther relatively high or low and lateral pressure coefficients (λ) is high,the number of regular shear slide cracks decreases and the probability of a rock burst also becomes lower. Our numerical simulation results show that the stability of sur-face rock and the natural bedding stratification of rock material greatly affect rock bursts. Installing bolts with due dili-gence and suitably can effectively prevent rock bursts. However,it is not effective to control rock bursts by releasing the strain energy with normal pre-boreholes.展开更多
The relationship between the Hoek-Brown parameters and the mechanical response of circular tunnels is il-lustrated. Closed-form and approximate solutions are given for the extent of the plastic zone and the stress and...The relationship between the Hoek-Brown parameters and the mechanical response of circular tunnels is il-lustrated. Closed-form and approximate solutions are given for the extent of the plastic zone and the stress and dis-placement fields under axisymmetrical and asymmetric stress conditions. For the same rock masses and under axisym-metrical stress conditions,the radius of the plastic zone in terms of Hoek-Brown criterion is generally an approximation of the radius in terms of the Mohr-Coulomb criterion. The radius in terms of the Hoek-Brown criterion is larger under low stress conditions. For poor quality rock masses (GSI<25),measures (such as grouting,setting rock bolts,etc.) that improve the GSI of rock masses are effective in improving the stability of tunnels. It is not advisable to improve the sta-bility of the tunnels by providing a small support resistance p through shotcrete,except for very poor quality jointed rock masses. Without reference to the quality of the rock mass,the disturbance factor D should not less than 0.5. Meas-ures which disturb rock masses during tunnel construction should be taken carefully when the tunnel depth increases.展开更多
Mechanism of circular tunnel rockburst is that, when the carrying capacity of the centralized zone of plastic deformation in limiting state reduces, the comparatively intact part in rock mass unloads by way of elastic...Mechanism of circular tunnel rockburst is that, when the carrying capacity of the centralized zone of plastic deformation in limiting state reduces, the comparatively intact part in rock mass unloads by way of elasticity; rockburst occurs immediately when the elastic energy released by the comparatively intact part exceeds the energy dissipated by plastic deformation. The equivalent strain was taken as a state variable to establish a catastrophe model of tunnel rockburst, and the computation expression of the earthquake energy released by tunnel rockburst was given. The analysis shows that, the conditions of rockburst occurrence are relative to rock's ratio of elastic modulus to descendent modulus and crack growth degree of rocks; to rock mass with specific rockburst tendency, there exists a corresponding critical depth of softened zone, and rockburst occurs when the depth of softened zone reaches.展开更多
Explicit solution techniques have been widely used in geotechnical engineering for simulating the coupled hydro-mechanical(H-M) interaction of fluid flow and deformation induced by structures built above and under sat...Explicit solution techniques have been widely used in geotechnical engineering for simulating the coupled hydro-mechanical(H-M) interaction of fluid flow and deformation induced by structures built above and under saturated ground, i.e. circular footing and deep tunnel. However, the technique is only conditionally stable and requires small time steps, portending its inefficiency for simulating large-scale H-M problems. To improve its efficiency, the unconditionally stable alternating direction explicit(ADE)scheme could be used to solve the flow problem. The standard ADE scheme, however, is only moderately accurate and is restricted to uniform grids and plane strain flow conditions. This paper aims to remove these drawbacks by developing a novel high-order ADE scheme capable of solving flow problems in nonuniform grids and under axisymmetric conditions. The new scheme is derived by performing a fourthorder finite difference(FD) approximation to the spatial derivatives of the axisymmetric fluid-diffusion equation in a non-uniform grid configuration. The implicit Crank-Nicolson technique is then applied to the resulting approximation, and the subsequent equation is split into two alternating direction sweeps,giving rise to a new axisymmetric ADE scheme. The pore pressure solutions from the new scheme are then sequentially coupled with an existing geomechanical simulator in the computer code fast Lagrangian analysis of continua(FLAC). This coupling procedure is called the sequentially-explicit coupling technique based on the fourth-order axisymmetric ADE scheme or SEA-4-AXI. Application of SEA-4-AXI for solving axisymmetric consolidation of a circular footing and of advancing tunnel in deep saturated ground shows that SEA-4-AXI reduces computer runtime up to 42%-50% that of FLAC’s basic scheme without numerical instability. In addition, it produces high numerical accuracy of the H-M solutions with average percentage difference of only 0.5%-1.8%.展开更多
A numerical code called Rock Failure Process Analysis (RFPA2D) was em- ployed to investigate the closure,damage and failure behavior of the horizontal tunnels.In this code the time-dependent deformation was described ...A numerical code called Rock Failure Process Analysis (RFPA2D) was em- ployed to investigate the closure,damage and failure behavior of the horizontal tunnels.In this code the time-dependent deformation was described in terms of evolution of meso- scopic structure,leading to progressive degradation of elastic modulus and failure strength of material.In terms of material degradation,a series of numerical simulations were per- formed to study the convergence and subsequent failure in circular tunnels.The numerical results provide a complete illumination for the closure,damage and failure behavior with different loading conditions.It is shown that the depth and the ratio of far field stresses play an important role in the creep behavior of tunnels.Creep failure is expected to occur in the direction of the smallest far field stress component,which means that rheological failure of tunnels is influenced not only by the rock characteristic around the tunnels but also by the orientation and distribution of far field stress on a global scale.展开更多
The two-dimensional transient response of an imperfect bonded circular lined pipeline lying in an elastic infinite medium is investigated.Imperfect boundary conditions between the surrounding elastic rock and the tunn...The two-dimensional transient response of an imperfect bonded circular lined pipeline lying in an elastic infinite medium is investigated.Imperfect boundary conditions between the surrounding elastic rock and the tunnel are modelled with a two-linear-spring design.The novelty of the manuscript consists in studying at the same time transient regimes and imperfect bonded interfaces for simulating the dynamic response of a tunnel embedded in an elastic infinite rock.Wave propagation fields in tunnel and rock are expressed in terms of infinite Bessel and Hankel series.To solve the transient problem,the Laplace transform and the associated Durbin’s algorithm are performed.To exhibit the dynamic responses,influences of various parameters such as the quality of the interface conditions and the thickness of the lining are presented.The dynamic hoop stresses and the solid displacements of both the tunnel and the rock are also proposed.展开更多
Large shear deformation problems are frequently encountered in geotechnical engineering.To expose the shear failure mechanism of rock tunnels,compression-shear tests for rock models with circular tunnel were carried o...Large shear deformation problems are frequently encountered in geotechnical engineering.To expose the shear failure mechanism of rock tunnels,compression-shear tests for rock models with circular tunnel were carried out,including single tunnel and adjacent double tunnels.The failure process is recorded by the external video and miniature cameras around the tunnel,accompanied by real-time acoustic emission monitoring.The experiments indicate that the shearing processes of rock tunnel can be divided into four steps:(i)cracks appeared around tunnels,(ii)shear cracks and spalling ejection developed,(iii)floor warping occurred,and(iv)shear cracks ran through the tunnel model.Besides,the roughness of the sheared fracture surface decreased with the increase in normal stress.Corresponding numerical simulation indicates that there are tensile stress concentrations and compressive stress concentrations around the tunnel during the shearing process,while the compressive stress concentration areas are under high risk of failure and the existence of adjacent tunnels will increase the degree of stress concentration.展开更多
基金supported by the National Natural Science Foundation of China[grant number 51991393]support from the Guangdong Provincial Key Laboratory of Earthquake Engineering and Applied Technology and Key Laboratory of Earthquake Resistance,Earthquake Mitigation,and Structural Safety funded by the Ministry of Education。
文摘Seismic isolation is an effective strategy to mitigate the risk of seismic damage in tunnels.However,the impact of surface-reflected seismic waves on the effectiveness of tunnel isolation layers remains under explored.In this study,we employ the wave function expansion method to provide analytical solutions for the dynamic responses of linings in an elastic half-space and an infinite elastic space.By comparing the results of the two models,we investigate the seismic isolation effect of tunnel isolation layers induced by reflected seismic waves.Our findings reveal significant differences in the dynamic responses of the lining in the elastic half-space and the infinitely elastic space.Specifically,the dynamic stress concentration factor(DSCF)of the lining in the elastic half-space exhibits periodic fluctuations,influenced by the incident wave frequency and tunnel depth,while the DSCF in the infinitely elastic space remain stable.Overall,the seismic isolation application of the tunnel isolation layer is found to be less affected by surface-reflected seismic waves.Our results provide valuable insights for the design and assessment of the seismic isolation effect of tunnel isolation layers.
基金This work was supported by the National Natural Science Foundation of China(Grant No.42077244)the Open Research Fund of State Key Laboratory of Deep Earth Science and Engineering(Sichuan University)(Grant No.DESE 202201)the Fundamental Research Funds for the Central Universities(Grant No.2242022k30054).
文摘To investigate the influence of unloading effect of a circular tunnel face on rockburst process,by innovatively combining rock drilling unloading devices and triaxial systems,the strain rockburst simulation under the entire stress path of“high initial stressþinternal unloadingþstress adjustment”(HUS test)was realized for the intact cubic red sandstone samples(100 mm×100 mm×100 mm).Comparative tests were conducted on cubic red sandstone samples with prefabricated circular holes(425 mm)under the stress path of“prefabricated circular hole+þhigh initial stress+stress adjustment”(PHS test),thereby highlighting the influence of internal unloading on rockburst failure.The test results revealed that with an increase in vertical stress,the sidewalls in both the HUS and PHS tests suffered strain rockburst failure.Compared with the PHS test,the initial failure stress in the HUS test is lower,and it is easier to induce sidewall rockbursts.This indicates that the internal unloading influences the sidewall failure,causing an obvious strength-weakening effect,which becomes more significant with an increase in buried depth.The strain rockburst failure was more severe in the HUS test owing to the influence of internal unloading.V-shaped rockburst pits were formed in the HUS tests,whereas in the PHS test,arcshaped rockburst pits were produced.It was also found that strain rockburst failure may occur only when the rock has a certain degree of rockburst proneness.
文摘The present paper aims to establish a versatile strength theory suitable for elasto-plastic analysis of underground tunnel surrounding rock. In order to analyze the effects of intermediate principal stress and the rock properties on its deformation and failure of rock mass, the generalized nonlinear unified strength theory and elasto-plastic mechanics are used to deduce analytic solution of the radius and stress of tunnel plastic zone and the periphery displacement of tunnel under uniform ground stress field. The results show that: intermediate principal stress coefficient b has significant effect on the plastic range,the magnitude of stress and surrounding rock pressure. Then, the results are compared with the unified strength criterion solution and Mohr–Coulomb criterion solution, and concluded that the generalized nonlinear unified strength criterion is more applicable to elasto-plastic analysis of underground tunnel surrounding rock.
基金Projects 50639100 supported by the National Natural Science Foundation of China50539100 by the New Century Talents Plan of Education Depart- ment
文摘Rock burst in a circular tunnel under high in-situ stress conditions was investigated with a numerical method coupled the rock failure process theory (RFPA) and discontinuous deformation theory (DDA). Some numerical tests were carraied out to investigate the failuer patterns of circular tunnel under unloading conditions. Compared the results under loading conditions,the shapes of failure zones are more regular under the unloading conditions. The failure pat-terns in the same type of rock mass are clearly different because of non-homogeneity of the rock material. The extension of cracks shows some predictability with an increasing of in-situ stress. When the homogeneity index of rocks (m) is ei-ther relatively high or low and lateral pressure coefficients (λ) is high,the number of regular shear slide cracks decreases and the probability of a rock burst also becomes lower. Our numerical simulation results show that the stability of sur-face rock and the natural bedding stratification of rock material greatly affect rock bursts. Installing bolts with due dili-gence and suitably can effectively prevent rock bursts. However,it is not effective to control rock bursts by releasing the strain energy with normal pre-boreholes.
基金Project 50639100 supported by the National Natural Science Foundation of China
文摘The relationship between the Hoek-Brown parameters and the mechanical response of circular tunnels is il-lustrated. Closed-form and approximate solutions are given for the extent of the plastic zone and the stress and dis-placement fields under axisymmetrical and asymmetric stress conditions. For the same rock masses and under axisym-metrical stress conditions,the radius of the plastic zone in terms of Hoek-Brown criterion is generally an approximation of the radius in terms of the Mohr-Coulomb criterion. The radius in terms of the Hoek-Brown criterion is larger under low stress conditions. For poor quality rock masses (GSI<25),measures (such as grouting,setting rock bolts,etc.) that improve the GSI of rock masses are effective in improving the stability of tunnels. It is not advisable to improve the sta-bility of the tunnels by providing a small support resistance p through shotcrete,except for very poor quality jointed rock masses. Without reference to the quality of the rock mass,the disturbance factor D should not less than 0.5. Meas-ures which disturb rock masses during tunnel construction should be taken carefully when the tunnel depth increases.
基金Project supported by the National Natural Science Foundation of China (No.50274044) the Educational Committee of Shandong Province of China (No.G04D15) the Natural Science Foundation of Shandong Province of China (No.Y2002-A03)
文摘Mechanism of circular tunnel rockburst is that, when the carrying capacity of the centralized zone of plastic deformation in limiting state reduces, the comparatively intact part in rock mass unloads by way of elasticity; rockburst occurs immediately when the elastic energy released by the comparatively intact part exceeds the energy dissipated by plastic deformation. The equivalent strain was taken as a state variable to establish a catastrophe model of tunnel rockburst, and the computation expression of the earthquake energy released by tunnel rockburst was given. The analysis shows that, the conditions of rockburst occurrence are relative to rock's ratio of elastic modulus to descendent modulus and crack growth degree of rocks; to rock mass with specific rockburst tendency, there exists a corresponding critical depth of softened zone, and rockburst occurs when the depth of softened zone reaches.
基金the support from the University Transportation Center for Underground Transportation Infrastructure at the Colorado School of Mines for partially funding this research under Grant No. 69A3551747118 of the Fixing America's Surface Transportation Act (FAST Act) of U.S. DoT FY2016
文摘Explicit solution techniques have been widely used in geotechnical engineering for simulating the coupled hydro-mechanical(H-M) interaction of fluid flow and deformation induced by structures built above and under saturated ground, i.e. circular footing and deep tunnel. However, the technique is only conditionally stable and requires small time steps, portending its inefficiency for simulating large-scale H-M problems. To improve its efficiency, the unconditionally stable alternating direction explicit(ADE)scheme could be used to solve the flow problem. The standard ADE scheme, however, is only moderately accurate and is restricted to uniform grids and plane strain flow conditions. This paper aims to remove these drawbacks by developing a novel high-order ADE scheme capable of solving flow problems in nonuniform grids and under axisymmetric conditions. The new scheme is derived by performing a fourthorder finite difference(FD) approximation to the spatial derivatives of the axisymmetric fluid-diffusion equation in a non-uniform grid configuration. The implicit Crank-Nicolson technique is then applied to the resulting approximation, and the subsequent equation is split into two alternating direction sweeps,giving rise to a new axisymmetric ADE scheme. The pore pressure solutions from the new scheme are then sequentially coupled with an existing geomechanical simulator in the computer code fast Lagrangian analysis of continua(FLAC). This coupling procedure is called the sequentially-explicit coupling technique based on the fourth-order axisymmetric ADE scheme or SEA-4-AXI. Application of SEA-4-AXI for solving axisymmetric consolidation of a circular footing and of advancing tunnel in deep saturated ground shows that SEA-4-AXI reduces computer runtime up to 42%-50% that of FLAC’s basic scheme without numerical instability. In addition, it produces high numerical accuracy of the H-M solutions with average percentage difference of only 0.5%-1.8%.
基金the"973"Program(2007CB209400)the National Natural Science Foundation of China(40638040)the Opening Foundation of State Key Laboratory of Geohazards Prevention and Geoenvironment Protection,Chengdu University of Technology
文摘A numerical code called Rock Failure Process Analysis (RFPA2D) was em- ployed to investigate the closure,damage and failure behavior of the horizontal tunnels.In this code the time-dependent deformation was described in terms of evolution of meso- scopic structure,leading to progressive degradation of elastic modulus and failure strength of material.In terms of material degradation,a series of numerical simulations were per- formed to study the convergence and subsequent failure in circular tunnels.The numerical results provide a complete illumination for the closure,damage and failure behavior with different loading conditions.It is shown that the depth and the ratio of far field stresses play an important role in the creep behavior of tunnels.Creep failure is expected to occur in the direction of the smallest far field stress component,which means that rheological failure of tunnels is influenced not only by the rock characteristic around the tunnels but also by the orientation and distribution of far field stress on a global scale.
文摘The two-dimensional transient response of an imperfect bonded circular lined pipeline lying in an elastic infinite medium is investigated.Imperfect boundary conditions between the surrounding elastic rock and the tunnel are modelled with a two-linear-spring design.The novelty of the manuscript consists in studying at the same time transient regimes and imperfect bonded interfaces for simulating the dynamic response of a tunnel embedded in an elastic infinite rock.Wave propagation fields in tunnel and rock are expressed in terms of infinite Bessel and Hankel series.To solve the transient problem,the Laplace transform and the associated Durbin’s algorithm are performed.To exhibit the dynamic responses,influences of various parameters such as the quality of the interface conditions and the thickness of the lining are presented.The dynamic hoop stresses and the solid displacements of both the tunnel and the rock are also proposed.
基金financial support from the National Natural Science Foundation of China(Grant Nos.U1965205 and 51779251)。
文摘Large shear deformation problems are frequently encountered in geotechnical engineering.To expose the shear failure mechanism of rock tunnels,compression-shear tests for rock models with circular tunnel were carried out,including single tunnel and adjacent double tunnels.The failure process is recorded by the external video and miniature cameras around the tunnel,accompanied by real-time acoustic emission monitoring.The experiments indicate that the shearing processes of rock tunnel can be divided into four steps:(i)cracks appeared around tunnels,(ii)shear cracks and spalling ejection developed,(iii)floor warping occurred,and(iv)shear cracks ran through the tunnel model.Besides,the roughness of the sheared fracture surface decreased with the increase in normal stress.Corresponding numerical simulation indicates that there are tensile stress concentrations and compressive stress concentrations around the tunnel during the shearing process,while the compressive stress concentration areas are under high risk of failure and the existence of adjacent tunnels will increase the degree of stress concentration.