Performance and Application of Double-layered Microcapsule Corrosion Inhibitors

Double-layered microcapsule corrosion inhibitors were developed by sodium monofluorophosphate as the core material,polymethyl methacrylate as the inner wall material,and polyvinyl alcohol as the outer wall material combining the solvent evaporation method and spray drying method.The protection by the outer capsule wall was used to prolong the service life of the corrosion inhibitor.The dispersion,encapsulation,thermal stability of microcapsules,and the degradation rate of capsule wall in concrete pore solution were analyzed by ultra-deep field microscopy,scanning electron microscopy,thermal analyzer,and sodium ion release rate analysis.The microcapsules were incorporated into mortar samples containing steel reinforcement,and the effects of double-layered microcapsule corrosion inhibitors on the performance of the cement matrix and the actual corrosion-inhibiting effect were analyzed.The experimental results show that the double-layered microcapsules have a moderate particle size and uniform distribution,and the capsules were completely wrapped.The microcapsules as a whole have good thermal stability below 230 ℃.The monolayer membrane structure microcapsules completely broke within 1 day in the simulated concrete pore solution,and the double-layer membrane structure prolonged the service life of the microcapsules to 80 days in the simulated concrete pore solution before the core material was completely released.The mortar samples containing steel reinforcement incorporated with the double-layered microcapsule corrosion inhibitors still maintained a higher corrosion potential than the monolayer microcapsule corrosion inhibitors control group at 60 days.The incorporation of double-layered microcapsules into the cement matrix has no significant adverse effect on the setting time and early strength.

THE DOUBLE-LAYER STRUCTURE OF THE HADLEY CIRCULATION AND ITS INTERDECADAL EVOLUTION CHARACTERISTICS

Based on the three-pattern decomposition of global atmospheric circulation(TPDGAC), this study investigates the double-layer structure of the Hadley circulation(HC) and its interdecadal evolution characteristics by using monthly horizontal wind field from NCEP/NCAR reanalysis data from 1948—2011. The following major conclusions are drawn: First, the double-layer structure of the HC is an objective fact, and it constantly exists in April,May, June, October and November in the Southern Hemisphere. Second, the double-layer structure is more obvious in the Southern than in the Northern Hemisphere. Since the double-layer structure is sloped in the vertical direction, it should be taken into consideration when analyzing the variations of the strength and location of the center of the HC.Third, the strength of the double-layer structure of the HC in the Southern Hemisphere consistently exhibits decadal variations with a strong, weak and strong pattern in all five months(April, May, June, October, and November), with cycles of 20-30 a and 40-60 a. Fourth, the center of the HC(mean position of the double-layer structure) in the Southern Hemisphere consistently and remarkably shifts southward in all the five months. The net poleward shifts over the 64 years are 5.18°, 2.11°, 2.50°, 1.79° and 5.76° for the five respective months, with a mean shift of 3.47°.

Numerical Analysis of the Structure of High-Strength Double-Layer Steel Plate Concrete Shaft by Drilling Method of Water-Bearing Weak Rock Formation

In order to ensure the safety of coal mine shaft construction, a double-layer steel plate concrete composite shaft wall structure was proposed. However, fewer studies were conducted on this structure, which made engineers too confused to fully recognize its feasibility of this structure. Hence, based on the previous experimental research on the Taohutu mine construction project in Ordos in Inner Mongolia, this research paper aims to provide a widely deep numerical analysis by the usage of the finite element software, in fact, to establish the corresponding numerical analysis model and make a comparison with the experimental data to get the rationality of the verified model. The influence of the composite characteristics of the steel plate and concrete on the ultimate bearing capacity and stress field of the shaft wall structure is studied here through the method of multi-factor analysis. Also, the optimal design scheme of the double-layer steel plate and concrete composite shaft wall structure is proposed in this research paper.

Preparation and Microwave Absorbing Properties of Double-layer Fine Iron Tailings Cementitious Materials

To develop the microwave absorbing(MA)properties of cementitious material mixed with mine solid waste,the iron tailings cementitious microwave absorbing materials were prepared.The iron tailings was treated into different particle sizes by planetary ball mill,and the physicochemical properties of iron tailings were tested by laser particle size analyzer and scanning electron microscope(SEM).The electromagnetic parameters of iron tailings cementitious materials were characterized by a vector network analyzer and simulated MA properties,and the MA properties of iron tailings-cement composite system with steel fiber as absorber was studied.Based on the design of the single-layer structure,optimum mix ratio and thickness configuration method of double-layer structure were further studied,meanwhile,the mechanical properties and engineering application were analyzed and discussed.The results show that the particle size of iron tailings can afiect its electromagnetic behavior in cementitious materials,and the smaller particles lead the increase of demagnetisation efiect induced by domain wall motion and achieve better microwave absorbing properties in cementitious materials.When the thickness of matching layer and absorbing layer is 5 mm,the optimized microwave absorbing properties of C1/C3 double-layer cementitious material can obtain optimal RL value of-27.61 dB and efiective absorbing bandwidth of 0.97 GHz,which attributes to the synergistic efiect of impedance matching and attenuation characteristics.The double-layer microwave absorbing materials obtain excellent absorbing properties and show great design flexibility and diversity,which can be used as a suitable candidate for the preparation of favorable microwave absorbing cementitious materials.

Double-layer microwave absorber of nanocrystalline strontium ferrite and iron microfibers

Microwave absorption properties of the nanocrystalline strontium ferrite （SrFe12O19） and iron （α-Fe） microfibers for single-layer and double-layer structures are investigated in a frequency range of 2 GHz 18 GHz. For the singlelayer absorbers, the nanocrystalline SrFe12O19 microfibers show some microwave absorptions at 6 GHz 18 GHz, with a minimum reflection loss （RL） value of -11.9 dB at 14.1 GHz for a specimen thickness of 3.0 mm, while for the nanocrystalline α-Fe microfibers, their absorptions largely take place at 15 GHz-18 GHz with the RL value exceeding -10 dB, with a minimum .RL value of about -24 dB at 17.5 GHz for a specimen thickness of 0.7 mm. For the doublelayer absorber with an absorbing layer of α-Fe microfibers with a thickness of 0.7 mm and matching layer of SrFe12O19 microfibers with a thickness of 1.3 ram, the minimum RL value is about -63 dB at 16.4 GHz and the absorption band width is about 6.7 GHz ranging from 11.3 GHz to 18 GHz with the RL value exceeding -10 dB which covers the whole Ku-band （12.4 GHz 18 GHz） and 27% of X-band （8.2 GHz 12.4 GHz）.

Double-layer indium doped zinc oxide for silicon thin-film solar cell prepared by ultrasonic spray pyrolysis

Indium doped zinc oxide （ZnO：In） thin films were prepared by ultrasonic spray pyrolysis on corning eagle 2000 glass substrate. 1 and 2 at.% indium doped single-layer ZnO：In thin films with different amounts of acetic acid added in the initial solution were fabricated. The 1 at.% indium doped single-layers have triangle grains. The 2 at.% indium doped single-layer with 0.18 acetic acid adding has the resistivity of 6.82 × 10^-3 Ω. cm and particle grains. The doublelayers structure is designed to fabricate the ZnO：In thin film with low resistivity （2.58 × 10^-3 Ω. cm） and good surface morphology. It is found that the surface morphology of the double-layer ZnO：In film strongly depends on the substratelayer, and the second-layer plays a large part in the resistivity of the doublewlayer ZnO：In thin film. Both total and direct transmittances of the double-layer ZnO：In film are above 80% in the visible light region. Single junction a-Si：H solar cell based on the double-layer ZnO：In as front electrode is also investigated.

Ultrahigh-power electrochemical double-layer capacitors based on structurally integrated 3D carbon tube arrays

The rational design of electrodes is the key to achieving ultrahigh-power performance in electrochemical energy storage devices.Recently,we have constructed well-organized and integrated three-dimensional(3D)carbon tube(CT)grids(3D-CTGs)using a 3D porous anodic aluminum oxide template-assisted method as electrodes of electrical double-layer capacitors(EDLCs),showing excellent frequency response performance.The unique design warrants fast ion migration channels,excellent electronic conductivity,and good structural stability.This study achieved one of the highest carbon-based ultrahigh-power EDLCs with the 3D-CTG electrodes,resulting in ultrahigh power of 437 and 1708 W·cm−3 with aqueous and organic electrolytes,respectively.Capacitors constructed with these electrodes would have important application prospects in the ultrahigh-power output.The rational design and fabrication of the 3D-CTGs electrodes have demonstrated their capability to build capacitors with ultrahighpower performance and open up new possibilities for applications requiring high-power output.

Preparation and properties of T-ZnO_(w) enhanced BCP scaffolds with double-layer structure by digital light processing

Bone scaffolds require both good bioactivity and mechanical properties to keep shape and promote bone repair.In this work,T-ZnO_(w) enhanced biphasic calcium phosphate(BCP)scaffolds with triply periodic minimal surface(TPMS)-based double-layer porous structure were fabricated by digital light processing(DLP)with high precision.Property of suspension was first discussed to obtain better printing quality.After sintering,T-ZnO_(w) reacts with b-tricalcium phosphate(β-TCP)to form Ca_(19)Zn_(2)(PO_(4))14,and inhibits the phase transition toα-TCP.With the content of T-ZnO_(w) increasing from 0 to 2 wt%,the flexural strength increases from 40.9 to 68.5 MPa because the four-needle whiskers can disperse stress,and have the effect of pulling out as well as fracture toughening.However,excessive whiskers will reduce the cure depth,and cause more printing defects,thus reducing the mechanical strength.Besides,T-ZnO_(w) accelerates the deposition of apatite,and the sample with 2 wt%T-ZnO_(w) shows the fastest mineralization rate.The good biocompatibility has been proved by cell proliferation test.Results confirmed that doping T-ZnO_(w) can improve the mechanical strength of BCP scaffolds,and keep good biological property,which provides a new strategy for better bone repair.

Simplified Method of Simulating Double-Layer Micro-Perforated Panel Structure

The micro-perforated panel(MPP)structure has been widely used in various noise control applications,and thus its acoustic performance prediction has been receiving increasing attention.The acoustic performance of simple MPP structures,such as a MPPsound absorber,has been predicted using an analytical calculation method.However,this is not a suitable approach toward predicting the acoustic performance of complicated MPP structures,owing to the structural complexity of these structures.Moreover,the many perforations of submillimeter scale diameter render the MPP structures very difficult to analyze using numerical simulation.Thus,this study focused on two different simplified MPP simulation methods:the transfer admittance method and the equivalent fluid method,and their application on double-layer MPP structures.Based on the two simplified MPP simulation methods,the transmission loss value of the double-layer MPP mufflers with two sets of different structural parameters was calculated,respectively.The predicted results were compared with the impedance tube measurements.The results revealed that the two simplified MPP simulation methods could effectively predict the acoustic performance of doublelayer MPP structures.Moreover,the prediction based on the transfer admittance method can outperform the two simplified simulation methods.

仿古建筑复杂异型结构施工技术

针对曲阜尼山圣境世界儒学文化中心项目复杂异型结构施工技术难题,研究并采用了高大空间异型穹顶施工技术、高空超大异形悬挑飞檐施工技术以及大跨度钢桁架动态液压整体提升关键技术,涉及空间放线技术、大跨度转化层施工、悬挑飞檐上拉下撑、复杂大跨度钢结构拼装、液压提升吊点布设、全过程动态提升等内容,提出了配套的施工方法及技术措施,保证了整体结构全过程的安全可靠,工程实施效果良好,可以为类似工程提供借鉴。

轻钢建筑围护结构节点的改进研究

轻钢建筑通常采用金属屋面和金属墙面作为围护结构.在分析常规轻钢建筑围护结构节点缺陷的基础上,对轻钢建筑的屋脊节点和檐口处节点进行了改进研究,从而妥善解决了该结构在使用、构造和施工等方面的问题。

汽车车身后柱流水槽结构设计

主要讲述汽车车身后柱流水槽结构设计,以及防止雨水进入车体的一些结构及工艺,分析了流水槽结构设计需注意的方面和为了保证其外观配合等的一些设计方案。

Robust double-layered ANF/MXene-PEDOT:PSS Janus films with excellent multi-source driven heating and electromagnetic interference shielding properties

The strategy of incorporating polymers into MXene-based functional materials has been widely used to improve their mechanical properties,however with inevitable sacrifice of their electrical conductivity and electromagnetic interference(EMI)shielding performance.This study demonstrates a facile yet efficient layering structure design to prepare the highly robust and conductive double-layer Janus films comprised of independent aramid nanofiber(ANF)and Ti3C2Tx MXene/poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)layers.The ANF layer serves to provide good mechanical stability,whilst the MXene/PEDOT:PSS layer ensures excellent electrical conductivity.Doping PEDOT:PSS into the MXene layer enhances the interfacial bonding strength between the MXene and ANF layers and improves the hydrophobicity and water/oxidation resistance of MXene layer.The resultant ANF/MXene-PEDOT:PSS Janus film with a conductive layer thickness of 4.4μm was shown to display low sheet resistance(2.18Ω/sq),good EMI shielding effectiveness(EMI SE of 48.1 dB),high mechanical strength(155.9 MPa),and overall toughness(19.4 MJ/m^(3)).Moreover,the excellent electrical conductivity and light absorption capacity of the MXene-PEDOT:PSS conductive layer mean that these Janus films display multi-source driven heating functions,producing excellent Joule heating(382℃ at 4 V)and photothermal conversion(59.6℃ at 100 mW/m^(2))properties.

重庆涪陵地区穿斗架民居挑檐结构做法研究

文章基于已掌握的近一百座涪陵地区民居的调研资料及十余座民居的精细测绘资料,采取分型分类的研究方法,从涪陵区常见挑檐结构的结构性与装饰性两个大的方面入手研究,通过对一般出檐、瓜角出檐两种主要的出檐类型进行做法、用料、装饰三个方面的分析,试图总结该地区常见挑檐结构的一般做法及特征,并对挑檐在结构性和装饰性二者的关系问题上提出可能的推断。

Design of Supercapacitor Electrodes Using Molecular Dynamics Simulations

Electric double-layer capacitors(EDLCs) are advanced electrochemical devices for energy storage and have attracted strong interest due to their outstanding properties. Rational optimization of electrode–electrolyte interactions is of vital importance to enhance device performance for practical applications. Molecular dynamics(MD) simulations could provide theoretical guidelines for the optimal design of electrodes and the improvement of capacitive performances, e.g., energy density and power density. Here we discuss recent MD simulation studies on energy storage performance of electrode materials containing porous to nanostructures. The energy storage properties are related to the electrode structures, including electrode geometry and electrode modifications. Altering electrode geometry, i.e., pore size and surface topography,can influence EDL capacitance. We critically examine different types of electrode modifications, such as altering the arrangement of carbon atoms, doping heteroatoms and defects, which can change the quantum capacitance. The enhancement of power density can be achieved by the intensified ion dynamics and shortened ion pathway.Rational control of the electrode morphology helps improve the ion dynamics by decreasing the ion diffusion pathway. Tuning the surface properties(e.g., the affinity between the electrode and the ions) can affect the ionpacking phenomena. Our critical analysis helps enhance the energy and power densities of EDLCs by modulating the corresponding electrode structures and surface properties.

Annealing of Oriented PP/PE Double-layer Film within the Melting Range of PE:the Role of Partial Melting and Self-nucleation

Due to the mechanical stability of the PP layer,the oriented PP/PE double-layer film with a row-nucleated crystalline structure can be annealed at a higher temperature than the PE monolayer film.In this work,the effects of annealing temperature within the melting range of PE on the crystalline structure and properties of PP/PE double-layer films were studied.When the annealing temperature is between 100 and 130℃,below the melting point of PE,the crystallinity,the long period,lateral dimension and orientation of the lamellae in the PE layer increase with the annealing temperature due to the melting of thin lamellae and the self-nucleated effect of partially-melted melts during annealing.With the annealing temperature further increasing to 138℃,near the melting ending point of PE,since the lamellae melt completely and the melt memory becomes weak during annealing,some spherulite structures are formed in the annealed sample,resulting in a decrease of orientation.In contrast,the annealing only causes the appearance of a low-temperature endothermic plateau in the PP layer.The improved size and orientation of lamellar structure in the PE layer increase the pore arrangement and porosity of the stretched PP/PE microporous membrane.This study successfully applies the self-nucleation effect of partially-melted polymer melt into the practical annealing process,which is helpful to guide the production of high-performance PP/PE/PP lithium batteries separator and the annealing process of other multilayer products.

关于中国古建筑若干问题的思考

针对中国建筑史的研究至今不过七八十年,且多有中断,许多问题均悬而未决的现状,就斗拱的起源、木构建筑在中国建筑史的统治地位、大屋顶的反宇飞檐等问题作了探索性的分析和思考,从而提高人们对古建筑的认识。

高空双层斜面大跨混凝土挑檐结构的施工

在高层建筑中运用斜面挑檐,施工难度大,工序复杂,也带来了高昂的施工措施费。针对上述问题,比选多个工程案例,形成了一套针对高空大挑檐施工的高效施工关键技术,取得较好的效果,可为今后类似工程提供技术借鉴。

青州博物馆悬挑13m钢结构挑檐安装技术

为解决青州博物馆悬挑13 m钢结构挑檐安装施工难题,通过方案对比选定了整体吊装与高空散装相结合的安装方法。采用盘扣式架体作为安装支撑胎架,并对胎架进行了设计和计算。利用手拉倒链解决了三角形钢桁架吊装空中姿态难题,使用BIM技术对盘扣式支撑胎架搭设和吊装过程进行了仿真模拟。应用结果表明:盘扣式支撑胎架相较传统型钢胎架,搭设速度快,施工成本更经济。BIM技术对于钢结构施工中工程量统计、成本动态管理、方案优化、三维可视化交底等方面具有较大优势。

In-situ constructed polymer/alloy composite with high ionic conductivity as an artificial solid electrolyte interphase to stabilize lithium metal anode

Lithium(Li)metal is regarded as the best anode material for lithium metal batteries(LMBs)due to its high theoretical specific capacity and low redox potential.However,the notorious dendrites growth and extreme instability of the solid electrolyte interphase(SEI)layers have severely retarded the commercialization process of LMBs.Herein,a double-layered polymer/alloy composite artificial SEI composed of a robust poly(1,3-dioxolane)(PDOL)protective layer,Sn and LiCl nanoparticles,denoted as PDOL@Sn-LiCl,is fabricated by the combination of in-situ substitution and polymerization processes on the surface of Li metal anode.The lithiophilic Sn-LiCl multiphase can supply plenty of Li-ion transport channels,contributing to the homogeneous nucleation and dense accumulation of Li metal.The mechanically tough PDOL layer can maintain the stability and compact structure of the inorganic layer in the long-term cycling,and suppress the volume fluctuation and dendrites formation of the Li metal anode.As a result,the symmetrical cell under the double-layered artificial SEI protection shows excellent cycling stability of 300 h at 5.0 mA·cm^(−2)for 1 mAh·cm^(−2).Notably,the Li||LiFePO_(4)full cell also exhibits enhanced capacity retention of 150.1 mAh·g^(−1)after 600 cycles at 1.0 C.Additionally,the protected Li foil can effectively resist the air and water corrosion,signifying the safe operation of Li metal in practical applications.This present finding proposed a different tactic to achieve safe and dendrite-free Li metal anodes with excellent cycling stability.