Schlieren成像和声场可视化

Schlieren技术是利用声场引起透明媒质光折射率的变化而实现声场可视化的光学成像技术。它具有对声场无干扰、快速、瞬态成像的特点。本文利用二维光学Fourier变换分析了Schlieren技术的成像原理,在采用连续激光和高速ICCD的Schlieren成像系统中,实验研究了平面波声场和线聚焦声场中换能器光学校准方法和声压的定量检测技术。发展声场瞬态和动态成像技术,观测了声波的聚焦过程和固-液界面的声场分布和变化。这些结果表明Schlieren技术是一种有效的声场可视化和定量检测的光学成像技术。

面向高速流场成像的聚焦纹影研究进展

相较于传统的光学流动可视化技术,聚焦纹影技术能对非聚焦区域的流场信息进行模糊化处理,从而反映窄景深内的流场信息,具有高空间分辨率、抗干扰能力强、无需播撒示踪粒子、低成本等特点,这些特点使得聚焦纹影十分适用于高速流场的流动显示和流场测量。本文在对聚焦纹影系统成像的基本原理进行介绍的基础上,以传统聚焦纹影在格栅对准和非定常流动多平面测量方面面临的挑战为出发点,总结了聚焦纹影的国内外相关研究,并进一步展望了聚焦纹影的未来发展。

Density and temperature reconstruction of a flame-induced distorted flow field based on background-oriented schlieren(BOS) technique

An experimental system based on the background-oriented schlieren（BOS） technique is built to reconstruct the density and temperature distribution of a flame-induced distorted flow field which has a density gradient. The cross-correlation algorithm with sub-pixel accuracy is introduced and used to calculate the background-element displacement of a disturbed image and a fourth-order difference scheme is also developed to solve the Poisson equation. An experiment for a disturbed flow field caused by a burning candle is performed to validate the built BOS system and the results indicate that density and temperature distribution of the disturbed flow field can be reconstructed accurately. A notable conclusion is that in order to make the reconstructed results have a satisfactory accuracy, the inquiry step length should be less than the size of the interrogation window.

Reconstruction of the Unsteady Supersonic Flow around a Spike Using the Colored Background Oriented Schlieren Technique

In this paper, the improved Background Oriented Schlieren technique called CBOS (Colored Background Oriented Schlieren) is described and used to reconstruct the density fields of three-dimensional flows. The Background Oriented Schlieren technique (BOS) allows the measurement of the light deflection caused by density gradients in a compressible flow. For this purpose the distortion of the image of a background pattern observed through the flow is used. In order to increase the performance of the conventional Background Oriented Schlieren technique, the monochromatic background is replaced by a colored dot pattern. The different colors are treated separately using suitable correlation algorithms. Therefore, the precision and the spatial resolution can be highly increased. Furthermore a special arrangement of the different colored dot patterns in the background allows astigmatism in the region with high density gradients to be overcome. For the first time an algebraic reconstruction technique (ART) is then used to reconstruct the density field of unsteady flows around a spike-tipped model from CBOS measurements. The obtained images reveal the interaction between the free-stream flow and the high-pressure region in front of the model, which leads to large-scale instabilities in the flow.

THE CALCULATION OF THE DENSITY FIELD FROM AXISYMMETRIC SCHLIEREN INTERFEROGRAMS BY THE IMAGE PROCESSING TECHNIQUES

The schlieren interferograms used to be analyzed in a qualitative way. In this paper, by means of the powerful computational ability and the large memory of computer; the image processing method is investigated for the digitalization of an axisymmetric schlieren interferogram and the determination of the density field. This method includes the 2-D low-pass filtering, the thinning of interferometric fringes, the extraction of physical information and the numerical integration of the density field. The image processing results show that the accuracy of the quantitative analysis of the schlieren interferogram can be improved and a lot of time can be saved in dealing with optical experimental results. Therefore, the algorithm used here is useful and efficient.

Non-cycloplegic spherical equivalent refraction in adults:comparison of the double-pass system,retinoscopy,subjective refraction and a table-mounted autorefractor

AIM:To evaluate the accuracy of spherical equivalent(SE) estimates of a double-pass system and to compare it with retinoscopy,subjective refraction and a table mounted autorefractor.METHODS:Non-cycloplegic refraction was performed on 125 eyes of 65 healthy adults(age 23.5±3.0 years) from October 2010 to January 2011 using retinoscopy,subjective refraction,autorefraction(Auto kerato refractometer TOPCON KR-8100,Japan) and a double pass system(Optical Quality Analysis System,OQAS,Visiometrics S.L.,Spain).Nine consecutive measurements with the double-pass system were performed on a subgroup of 22 eyes to assess repeatability.To evaluate the trueness of the OQAS instrument,the SE laboratory bias between the double pass system and the other techniques was calculated.RESULTS:The SE mean coefficient of repeatability obtained was 0.22D.Significant correlations could be established between the OQAS and the SE obtained with retinoscopy(r=0.956,P【0.001),subjective refraction(r=0.955,P【0.001) and autorefraction(r=0.957,P【0.001).The differences in SE between the double-pass system and the other techniques were significant(P【0.001),but lacked clinical relevance except for retinoscopy;Retinoscopy gave more hyperopic values than the double-pass system-0.51±0.50D as well as the subjective refraction-0.23±0.50D;More myopic values were achieved by means of autorefraction 0.24±0.49D. CONCLUSION:The double-pass system provides accurate and reliable estimates of the SE that can be used for clinical studies.This technique can determine the correct focus position to assess the ocular optical quality.However,it has a relatively small measuring range in comparison with autorefractors(-8.00 to +5.00D),and requires prior information on the refractive state of the patient.

Quantitative Flow Visualization by Rainbow Schlieren Deflectometry and Pitot Pressure Measurements for Leek Peeler Nozzle Jets

To optimize the leek peeling performance, a new nozzle has been developed in which the nozzle has a design Mach number of 1.68, an inner diameter of 2.0 mm at the throat, and an inner diameter of 2.3 mm at the exit. Experiments have been conducted over a range of nozzle pressure ratios from 3.0 to 6.0. Flow field issued from the new nozzle is quantitatively visualized by the rainbow schlieren deflectometry and compared with that from a conventional nozzle. Density fields in the free jets are reconstructed by the Abel inversion method for the schlieren images with the horizontal rainbow filter. The density values at the exit of the conventional nozzle obtained by the rainbow schlieren are compared with the analytical results by the flow model proposed in the past. In addition, Pitot probe surveys along the jet centerline were made to obtain the impact pressure distributions. The Mach number and velocity distributions along the jet centerline are obtained from a combination of the density and Pitot pressure data to clarify the fundamental flow structure of leek peeler nozzle jets.

Application of Rainbow Schlieren Deflectometry for Jets from Round Laval Nozzles Followed by Cylindrical Ducts

The jet from a round Laval nozzle followed by a cylindrical duct with an inner diameter of 10 mm and a length of 50 mm is investigated experimentally. The Laval nozzle has a design Mach number of 1.5. Quantitative flow visualization of the jet issued from the duct exit is performed over a range of nozzle pressure ratios from 2.0 to 4.5 using the rainbow schlieren deflectometry combined with the computed tomography to investigate the jet three-dimensional structure. The flow features of the near-field shock systems in the jets are displayed with the density contour plot at the cross-section including the jet centerline. Effects of the nozzle pressure ratio on the density profile along the jet centerline are clarified quantitatively. In addition, a comparison between the present experiment and the previous one with a conventional Laval nozzle for jet centerline density profiles is carried out to examine the effect of the cylindrical duct. Furthermore, the three-dimensional structures of overexpanded and underexpanded jets are demonstrated with the isopycnic surfaces to visualize the internal flow features.

High gain fiber-solid hybrid double-passing end-pumped Nd:YVO4 picosecond amplifier with high beam quality

We propose a fiber-solid hybrid system which consists of a semiconductor saturable absorber mirror(SESAM)modelocked fiber seed with a pulse width of 10.2 ps and a repetition rate of 18.9 MHz,a two-level fiber pre-amplifier and a double-passing end-pumped Nd:YVO4 amplifier.In the solid-state amplifier,to enhance the gain and the extraction efficiency,a specially designed structure in which the seed light passes through the gain medium four times and makes full use of population inversion is used as the double-passing amplifier.Besides,the beam filling factor(the ratio of the seed light diameter to the pump light diameter)and the thermal lens effect of the double-passing amplifier are considered and its optical-to-optical conversion efficiency is further improved.To preserve the beam quality of the double-passing amplifier,a new method of spherical-aberration self-compensation based on the principles of geometrical optics is used and discussed.Our system achieves a maximum average power of 9.5Wat the pump power of 28W,corresponding to an optical-to-optical efficiency of 27%.And the beam quality factor M^2 reaches 1.3 at the maximum output power.

Multi-Schlieren CT Measurements of Supersonic Microjets from Circular and Square Micro Nozzles

Instantaneous three-dimensional (3D) density distributions of a shock-cell structure of perfectly and imperfectly expanded supersonic microjets escaping into an ambient space are measured. For the 3D observation of supersonic microjets, non-scanning 3D computerized tomography (CT) technique using a 20-directional quantitative schlieren optical system with flashlight source is employed for simultaneous schlieren photography. The 3D density distributions data of the microjets are obtained by 3D-CT reconstruction of the projection’s images using maximum likelihood-expectation maximization. Axisymmetric convergent-divergent (Laval) circular and square micro nozzles with operating nozzle pressure ratio 5.0, 4.5, 4.0, 3.67, and 3.5 have been studied. This study examines perfectly expanded, overexpanded, and underexpanded supersonic microjets issued from micro nozzles with fully expanded jet Mach numbers Mj ranging from 1.47 - 1.71, where the design Mach number is Md = 1.5. A complex phenomenon for free square microjets called axis switching is clearly observed with two types “upright” and “diagonal” of “cross-shaped”. The initial axis-switching is 45° within the first shock-cell range. In addition, from the symmetry and diagonal views of square microjets for the first shock-cells, two different patterns of shock waves are viewed. The shock-cell spacing and supersonic core length for all nozzle pressure ratios are investigated and reported.

Two-channel model based adaptive schlieren detection algorithm for BOS system

A schlieren detection algorithm is proposed for the ground-to-air background oriented schlieren(BOS) system to achieve high-speed airplane shock waves visualization. The proposed method consists of three steps. Firstly, image registration is incorporated for reducing errors caused by the camera motion.Then, the background subtraction dual-model single Gaussian model(BS-DSGM) is proposed to build a precise background model. The BS-DSGM could prevent the background model from being contaminated by the shock waves. Finally, the twodimensional orthogonal discrete wavelet transformation is used to extract schlieren information and averaging schlieren data. Experimental results show our proposed algorithm is able to detect the aircraft in-flight and to extract the schlieren information. The precision of schlieren detection algorithm is 0.96. Three image quality evaluation indices are chosen for quantitative analysis of the shock waves visualization. The white Gaussian noise is added in the frames to validate the robustness of the proposed algorithm.Moreover, we adopt two times and four times down sampling to simulate different imaging distances for revealing how the imaging distance affects the schlieren information in the BOS system.

Quantitative Schlieren Image-Noise Reduction Using Inverse Process and Multi-Path Integration

This report deals with introducing two new techniques based on a novel concept of complex brightness gradient in quantitative schlieren images, “inverse process” and “multi-path integration” for image-noise reduction. Noise in schlieren images affects the projections (density thickness) images of computerized tomography (CT). One spot noise in the schlieren image appears in a line shape in the density thickness image. Noise effect like an infectious disease spreads from a noisy pixel to the next pixel in the direction of single-path integration. On the one hand, the noise in the schlieren image reduces the quality of the image and quantitative analysis and is undesirable;on the other it is unavoidable. Therefore, the importance of proper noise reduction techniques seems essential and tangible. In the present report, a novel technique “multi-path integration” is proposed for noise reduction in projections images of CT. Multi-path integration is required the schlieren brightness gradient in two orthogonal directions. The 20-directional quantitative schlieren optical system presents only images of schlieren brightness in the horizontal gradient and another 20-directional optical system seems necessary to obtain vertical schlieren brightness gradient, simultaneously. Using the “inverse process”, a new technique enables us to obtain vertical schlieren brightness gradient from horizontal experimental data without the necessity of a new optical system and can be used for obtaining any optional directions of schlieren brightness gradient.

Characteristics of Laser Produced Plasmas Obtained by Fast ICCD Photography, Schlieren Photography and Optical Emission Spectroscopy

Pulsed laser produced plasmas(LPP)are important for industrial applications and fundamental researches,and their complex,multi-physical and cross-chemical processes need to be investigated more comprehensively.In this work,images of the luminous plasma,the spatial density distribution,and the plasma parameters are experimentally investigated by using fast ICCD photography,schlieren photography,and optical emission spectroscopy.Plasmas are produced by a 1 064 nm,15 ns Nd:YAG laser.Free expanding and splitting phenomena are observed in vacuum(at the pressure of about 1×10 3Pa)and air(at the pressure of 20 Pa)using fast photography,respectively.Meanwhile,shock waves formed in the atmospheric laser produced plasma are visualized by schlieren photography.The formation of shock waves is interpreted with the Sedov-Taylor theory,and an averaged expansion velocity about 375 m/s of the shock waves is estimated during 200～1 000 ns.Atmospheric air is found to have significant confinement effects on the plasma expansions compared to that in vacuum or low pressure ambient.Based on the optical emission spectroscopy,after 1 000 ns,at 0.6 mm above the target,the plasma temperature is about 7 800 K and the electron number density is approximately 0.64×1016cm-3.

Schlieren方法中的二维空间滤波效应

在分析一维Ｓｃｈｌｉｅｒｅｎ方法不能有效显示二维弱位相分布的基础上，为有效地显示二维位相梯度分布，构造了几类二维直角空间滤波函数，并分别计算了它们的滤波效应．结果表明几类二维空间滤波都可以较大的衬度同时显示二维弱位相梯度分布，且不同形式的二维空间滤波对像面强度分布的“直流”分量有影响．

Schlieren Visualization of Acoustic Propagation Characteristics in a One-Dimensional Phononic Crystal

The acoustic propagation characteristics of a finite one-dimensional water-glass phononic crystal(PC)are studied using the Schlieren visualization method,which is fast and non-invasive.The band structures of this PC are measured experimentally with continuous acoustic waves incident on it using the Schlieren method,and the results are highly consistent with the theoretical calculations.The dynamic acoustic field in the PC at different frequencies is imaged and the resonance phenomena in the components of the PC are observed.The results show that the Schlieren method is an effective means of studying the interactions between acoustic waves and PCs.

Schlieren Visualization of M arangoni Effect in Gas-Liquid Systems

This paper is focused on the Marangoni effect in the gas-liquid mass transfer systems. A series of experiments were conducted to observe Marangoni effect by a laser Schlieren system. Experimental investigations of the occurrence of Marangoni convection were presented. The typical polygonal patterns and even the reaching of chaotic interfacial flow were observed. The visual evidences were discussed and the characteristic time and scale of Marangoni convection were obtained approximately as 0. 5 s and 1 mm according to the Schlieren images. From the perspective of hydrodynamic instability, the mechanism of the Marangoni convection was investigated. Though many external factors have influence on the interfacial instability, the local surface-tension gradient is the primary reason for the Marangoni convection. The small-scale interfacial flow increases the surface renewal rate. Consequently. due to the occurrence of the Marangoni effect, the mass transfer rate can be significantly enhanced.

A Flat-Gain Double-Pass Amplifier with New Hafnia-Bismuth-Erbium Codoped Fiber

An efficient and compact double-pass optical fiber amplifier is demonstrated using a newly developed hafnia bismuth erbium co-doped fiber（HBEDF） as a gain medium. The HBEDF is fabricated using a modified chemical vapor deposition in conjunction with solution doping. The fiber has an erbium ion concentration of 12500 ppm.At the optimum length of 0.5 m, the HBEDF amplifier（HBEDFA） achieves a flat gain of 26 d B with a gain variation of less than 1.5 d B within a wavelength region from 1530 to 1560 nm when the input signal and pump power are fixed at-30 d Bm and 140 m W, respectively. On the other hand, at the input signal power of-10 d Bm,the HBEDFA also achieves a flat gain of 14.2 d B with a gain variation of less than 2.5 d B within a wide wavelength region from 1525 to 1570 nm. Compared with the conventional zirconia erbium co-doped fiber based amplifier,the proposed HBEDFA obtains a more efficient gain and lower noise figure. For an input signal of-30 d Bm, the gain improvements of 6.2 d B and 4.8 d B are obtained at 1525 nm and 1540 nm, respectively.

Temperature Field Reconstruction in High-Temperature Gas by Using the Colored Background Oriented Schlieren Method

A 3D temperature field reconstruction method using the colored background oriented schlieren(CBOS)method is proposed to address image blurring due to the different refractive index of the multi-wavelength light and significant errors produced when the traditional background oriented schlieren(BOS)method is applied to high-temperature gas.First,the traditional method is employed to reconstruct the non-uniform 3D temperature field.Second,the CBOS method is applied to correct the distortion.Then,by analyzing the correlation coefficient among different color points of the colored background pattern,the non-uniform temperature field is reconstructed much more accurately.Finally,the experimental results are verified by applying the Runge-Kutta ray-tracing method and the thermocouple contact measurement method.The maximum average temperature error of the CBOS-reconstructed temperature field is 12.92°C,compared with the thermocouples.Therefore,an accurate three-dimensional reconstruction of the temperature field can be achieved by the proposed method effectively.

A NEW SCHLIEREN TEXTURE IN NEMATIC STATE OF A THERMOTRORIC AROMATIC COPOLYRSTER

A schlieren texture with six dark brushes emanating from a point and a closed inversion wall have been observed under polarizing optical microscope in nematic state of a thermotropic aromatic copolyester, which have not been reported so far in the field of liquid crystalline polymers (LCPs).

障碍物数量对含尘瓦斯爆炸特性影响的试验和数值模拟研究

为探究含尘瓦斯爆炸条件下不同数量障碍物的激励效应,运用中尺度激波管道和激光纹影系统,对比不同数量障碍物影响下含尘瓦斯爆炸的火焰传播和压力变化,分析爆炸流场结构的变化。通过数值模拟软件Fluent模拟含尘瓦斯爆炸,对试验结论进行补充说明。结果表明,障碍物对爆炸火焰的加速作用在单一瓦斯参与下更加强烈。煤尘的加入使得流场湍流度增大,混合爆炸释放更多能量,激波强度增大,爆炸压力提升。障碍物对火焰的影响仅在其附近有效,障碍物下游最大超压明显提升。随障碍物数量的增加,激波反复振荡、叠加,使得压力升高,湍流度增加,火焰形成射流并加速燃烧。火焰传播速度和最大超压与障碍物数量呈正相关关系。