Formation, microstructure and mechanical properties of double-sided laser beam welded Ti-6Al-4V T-joint

The T-joints of Ti?6Al?4V alloy were manufactured by double-sided synchronized laser beam welding with the homologous filler wire. The formation, microstructure and mechanical properties of welded joints as well as the correlations of each other were investigated. The results indicate that the quality of weld seams is good without defects such as discontinuity, beading, visible cracks or porosity, which is linked to the steady molten pool behavior and droplet transition. The morphologies of the heat affected zone (HAZ) located on the skin and stringer are disparate. The microstructure of the HAZ and fusion zone (FZ) is mainly comprised of acicular martensiticα′ phases. The microhardness of the HAZ and FZ is higher than that of the base metal (BM) and reaches a maximum value at the HAZ near FZ on the stringer. The tensile specimens along the skin and stringer fractured at the BM with ductile fracture surfaces.

Characterization of CIAE developed double-sided silicon strip detector for charged particles

A double-sided silicon strip detector(DSSD)with active area of 48 mm x 48 mm and thickness of300μm has been developed. Each side of DSSD consists of48 strips, each with width of 0.9 mm and inter-strip separation of 0.1 mm. Electrical properties and detection performances including full depletion bias voltage, reverse leakage current, rise time, energy resolution and cross talk have been studied. At a bias of 80 V, leakage current in each strip is less than 15 nA, and rise time for alpha particle at 5157 keV is approximately 15 ns on both sides.Good energy resolutions have been achieved with0.65-0.80% for the junction strips and 0.85-1.00% for the ohmic strips. The cross talk is found to be negligible on both sides. The overall good performance of DSSD indicates its readiness for various nuclear physics experiments.

Relationship between Randomness and Coefficient Alpha: A Monte Carlo Simulation Study

Cronbach’s Alpha coefficient is the most popular method of examining reliability. It is typically used when the researcher has several Likert-type items that are summed or averaged to make a composite score. Distribution of alpha coefficient has been subjected of many studies. In this study relationship between randomness and Cronbach alpha coefficient were investigated and in this context, present study was examined the question“What is the distribution of the coefficient alpha when a Likert-type scale is answered randomly?” Data were generated in the form of five point Likert-type items and Monte Carlosimulation was run for 5000 times for different item numbers.

Keyhole Double-Sided Arc Welding Process

In the proposed method, the current/arc is guided through the keyhole so that the energy of the plasma jet is compensated while it is consumed in heating the workpiece along the keyhole. As a result, deep narrow penetration has been achieved on 12.7 mm (1/2') thick stainless steel plates using 70 A welding current.

Effect of pin penetration depth on double-sided friction stir welded joints of AA6061-T913 alloy

Friction stir welding (FSW) of aluminum alloys is currently utilized in several modern industries. The joints must have sufficient elastic?plastic response and formability levels similar to that of the base metal. In this work, double-sided FSW of AA6061 sheet was compared with its conventional single-sided one. An adjustable tool with different pin lengths (50%?95% of the sheet thickness) was used to perform the double-sided welds. Macro- and micro-structures, strength, and hardness of the joints were investigated to determine the optimum pin penetration depth. The best results were obtained for a double-sided joint made by a pin length equal to 65% of the sheet thickness, which showed an increase of 41% in the ultimate tensile strength compared with the single-sided joint.

Numerical Simulation of Current Density Distribution in Keyhole Double-Sided Arc Welding

In the double-sided arc welding system (DSAW) composing of PAW+TIG arcs, the PAW arc is guided by the TIG arc so that the current mostly flows through the direction of the workpiece thickness and the penetration is greatly improved. To analyze the current density distribution in DSAW is beneficial to understanding of this process. Considering all kinds of dynamic factors acting on the weldpool, this paper discusses firstly the surface deformation of the weldpool and the keyhole formation in PAW+TIG DSAW process on the basis of the magnetohydrodynamic theory and variation principles. Hence, a model of the current density distribution is developed. Through numerical simulation, the current density distribution in PAW+TIG DSAW process is quantitatively analyzed. It shows that the minimal radius of keyhole formed in PAW+TIG DSAW process is 0.5 mm and 89.5 percent of current flows through the keyhole.

Nonlinear optical properties in double-sided nonlinear media with Z-scan technique based on the Huygens-Fresnel principle

We present a theoretical model to analyse the propagation of a Gaussian laser beam through double-sided nonlinear media. This model is based on the Huygens-Fresnel diffraction integral method. This theoretical model is not only consistent with the cascade structure model for a small nonlinear phase-shift but also can be used for a large nonlinear phase-shift. It has been verified that it is suitable to characterize the double-sided nonlinear media compared with the cascade structure model. A good agreement between the experimental data and the results from the theoretical model is obtained. It will be useful for the design of multi-sided nonlinear materials.

DEALING WITH SPATIAL RELATIONS FOR SPATIAL OBJECTS WITH RANDOMNESS IN GIS

To design retrieval algorithm of spatial relations for spatial objects with randomness in GIS,this paper builds up the membership functions based on set theory idea,used for determination of topological spatial relations between random objects,such as between point and point,point and line or polygon,which provides theoretical basis for retrieving spatial relations between certain and random objects.Finally,this paper interprets detailed methods and steps of realizing them by means of some simple examples under the GIS’s environment.

A High-Randomness and High-Stability Electronic Quantum Random Number Generator without Post Processing

Random numbers are one of the key foundations of cryptography.This work implements a discrete quantum random number generator(QRNG)based on the tunneling effect of electrons in an avalanche photo diode.Without any post-processing and conditioning,this QRNG can output raw sequences at a rate of 100 Mbps.Remarkably,the statistical min-entropy of the 8,000,000 bits sequence reaches 0.9944 bits/bit,and the min-entropy validated by NIST SP 800-90B reaches 0.9872 bits/bit.This metric is currently the highest value we have investigated for QRNG raw sequences.Moreover,this QRNG can continuously and stably output raw sequences with high randomness over extended periods.The system produced a continuous output of 1,174 Gbits raw sequence for a duration of 11,744 s,with every 8 Mbits forming a unit to obtain a statistical min-entropy distribution with an average value of 0.9892 bits/bit.The statistical min-entropy of all data(1,174 Gbits)achieves the value of0.9951 bits/bit.This QRNG can produce high-quality raw sequences with good randomness and stability.It has the potential to meet the high demand in cryptography for random numbers with high quality.

Integrated evaluation system under randomness and fuzziness for groundwater contamination risk assessment in a little town, Central China

An integrated evaluation system under randomness and fuzziness was developed in this work to systematically assess the risk of groundwater contamination in a little town, Central China. In this system, randomness of the parameters and the fuzziness of the risk were considered simultaneously, and the exceeding standard probability of contamination and human health risk due to the contamination were integrated. The contamination risk was defined as a combination of "vulnerability" and "hazard". To calculate the value of "vulnerability", pollutant concentration was simulated by MODFLOW with random input variables and a new modified health risk assessment(MRA) model was established to analyze the level of "hazard". The limit concentration based on environmental-guideline and health risk due to manganese were systematically examined to obtain the general risk levels through a fuzzy rule base. The "vulnerability" and "hazard" were divided into five categories of "high", "medium-high", "medium", "low-medium" and "low", respectively. Then, "vulnerability" and "hazard" were firstly combined by integrated evaluation. Compared with the other two scenarios under deterministic methods, the risk obtained in the proposed system is higher. This research illustrated that ignoring of uncertainties in evaluation process might underestimate the risk level.

Improved quantum randomness amplification with finite number of untrusted devices based on a novel extractor

Quantum randomness amplification protocols have increasingly attracted attention tbr their tantastic ability to ampllI~, weak randomness to almost ideal randomness by utilizing quantum systems. Recently, a realistic noise-tolerant randomness amplification protocol using a finite number of untrusted devices was proposed. The protocol has the composable security against non-signalling eavesdroppers and could produce a single bit of randomness from weak randomness sources, which is certified by the violation of certain Bell inequalities. However, the protocol has a non-ignorable limitation on the min- entropy of independent sources. In this paper, we further develop the randomness amplification method and present a novel quantum randomness amplification protocol based on an explicit non-malleable two independent-source randomness extractor, which could remarkably reduce the above-mentioned specific limitation. Moreover, the composable security of our improved protocol is also proposed. Our results could significantly expand the application range for practical quantum randomness amplification, and provide a new insight on the practical design method for randomness extraction.

Numerical Simulation of Electromagnetic Force in Double-Sided Arc Welding Process

Up till now, most of the researchers believe that there are four kinds of forces in the weld pool convection, they aresurface tension, electromagnetic force, buoyancy and gas shear stress. So electromagnetic force is very important,especially when large current is applied. In most of previous models, the electromagnetic force is calculated analytically,in which only the axial component of current is considered. Actually the radial component of current has thesame effect, and may be advanced in some locations. In double-sided arc welding process, instead of the earthclamp, another torch is placed on the opposite side; the current will go from one torch, through the weld zone,to another torch. In this case, the current is more concentrated in the weld zone; the electromagnetic force willhave significant effect compared with conventional welding process. In this paper, a new method of numericalcalculation for electromagnetic force is developed, in which both axial and radial components are considered. And asan example, the distribution of electromagnetic force in double-sided arc welding is calculated. It demonstrates thatthis new method could give more accurate simulation of electromagnetic force, and is close to the actual process.

INFLUENCE OF POLYMER CHARACTERISTICS AND MELT-SPINNING CONDITIONS ON THE PRODUCTION OF HIGH RANDOMNESS 60PHB/PET THERMOTROPIC LIQUID CRYSTAL COPOLYESTER FIBER

Six samples of linear high randomness 60PHB/ PET thermotropic liquid crystal copolyesters are made by melt copolymerization at 290℃ , whose randomness about 0.955 is measured by the discernible ’H-NMR spectrometer. High tenacity, high module fiber is prepared by melt spinning in liquid crystal phase. The effect of molecular weight, shear rate, temperature as well as spinning drawn ratio on the mechanical behavior of 60PHB / PET copolyester fiber are shown that, lower shear rate (2 10 s-1), higher temperature melting （300℃ ）, lower temperature spinning （280℃ ） and higher molecular weight are favourable to the increase of the fiber mechanical properties. With the variance of drawn ratio, fiber mechanical property has a transition point due to traversion from shear-orientation to drawn-orientation. The copolyester fiber has high crystallinity, high orientation at the crystalline region, high chain orientation and high regular fibrillar structure.

Characteristic studies on positive and negative streamers of double-sided pulsed surface dielectric barrier discharge

The mechanisms of streamer generation and propagation in double-sided pulsed surface dielectric barrier discharge(SDBD)on both sides have been analyzed and investigated by experiment and numerical simulation.The fully exposed asymmetric SDBD has two discharge processes located on the high voltage electrode(HVE)side and the ground electrode(GE)side.Discharge images of the HVE side and GE side are taken by a digital camera under continuous pulse and ICCD(Intensified Charge Coupled Device)is utilized to diagnose the generation and propagation of streamers in single pulse discharge.In order to understand the physical mechanisms of streamer evolution more deeply,we establish a 2D simulation model and analyze it from the aspects of electron density,ion density,reduced electric field and electron impact ionization source term.The results show that the primary and secondary discharges on the HVE side and the GE side of the double-sided SDBD are composed of positive streamer and negative streamer,respectively.On the HVE side,the accumulation of positive charges on the dielectric surface causes the direction of the electric field to reverse,which is the principal factor for the polarity reversal of the streamer.On the GE side,both the negative charges accumulated on the dielectric surface and the falling voltage are the key factors for the streamer polarity switch.

Penetration mechanism of aluminum alloy in double-sided GTAW process

The penetration mechanism of aluminum alloy in double-sided gas tungsten arc welding (GTAW) process was probed by means of theoretical analysis, experimentation and numerical simulation. The results show that, firstly, the welding current goes straight through the weld zone, forms a stronger electromagnetic force field, and causes a stronger fluid flow in the weld pool. Secondly, during double-sided GTAW process, when the weld is partial penetrated, a heat-congregated zone forms between the bottoms of the two weld pools, where the temperature can increase quickly even though only a small amount of heat is input. Thirdly, the buoyancy force causes an inward flow in the bottom weld pool, which can drive the hot liquid on the surface to the bottom of the pool.

Double-sided subduction with contrasting polarities beneath the Pamir-Hindu Kush:Evidence from focal mechanism solutions and stress field inversion

The Pamir-Hindu Kush region at the western end of the Himalayan-Tibet orogen is one of the most active regions on the globe with strong seismicity and deformation and provides a window to evaluate continental collision linked to two intra-continental subduction zones with different polarities.The seismicity and seismic tomography data show a steep northward subducting slab beneath the Hindu Kush and southward subducting slab under the Pamir.Here,we collect seismic catalogue with 3988 earthquake events to compute seismicity images and waveform data from 926 earthquake events to invert focal mechanism solutions and stress field with a view to characterize the subducting slabs under the Pamir-Hindu Kush region.Our results define two distinct seismic zones:a steep one beneath the Hindu Kush and a broad one beneath the Pamir.Deep and intermediate-depth earthquakes are mainly distributed in the Hindu Kush region which is controlled by thrust faulting,whereas the Pamir is dominated by strike-slip stress regime with shallow and intermediate-depth earthquakes.The area where the maximum principal stress axis is vertical in the southern Pamir corresponds to the location of a highconductivity low-velocity region that contributes to the seismogenic processes in this region.We interpret the two distinct seismic zones to represent a double-sided subduction system where the Hindu Kush zone represents the northward subduction of the Indian plate,and the Pamir zone shows southward subduction of the Eurasian plate.A transition fault is inferred in the region between the Hindu Kush and the Pamir which regulates the opposing directions of motion of the Indian and Eurasian plates.

Stress-Induced Deformation of Thin Copper Substrate in Double-Sided Lapping

Double-sided lapping is an precision machining method capable of obtaining high-precision surface.However,during the lapping process of thin pure copper substrate,the workpiece will be warped due to the influence of residual stress,including the machining stress and initial residual stress,which will deteriorate the flatness of the workpiece and ultimately affect the performance of components.In this study,finite element method(FEM)was adopted to study the effect of residual stress-related on the deformation of pure copper substrate during double-sided lapping.Considering the initial residual stress of the workpiece,the stress caused by the lapping and their distribution characteristics,a prediction model was proposed for simulating workpiece machining deformation in lapping process by measuring the material removal rate of the upper and lower surfaces of the workpiece under the corresponding parameters.The results showed that the primary cause of the warping deformation of the workpiece in the doublesided lapping is the redistribution of initial residual stress caused by uneven material removal on the both surfaces.The finite element simulation results were in good agreement with the experimental results.

Evaporated potassium chloride for double-sided interfacial passivation in inverted planar perovskite solar cells

Defect-induced charge carrier recombination at the interfaces between perovskite and adjacent charge transport layers restricts further improvements in the device performance of perovskite solar cells(PSCs).Defect passivation at these interfaces can reduce trap states and inhibit the induced nonradiative recombination.Herein,we report a double-sided interfacial passivation via simply evaporating potassium chloride(DIP-KCl)at both the hole transport layer(HTL)/perovskite and perovskite/electron transport layer(ETL)interfaces in inverted planar PSCs.We demonstrate that the bottom KCl layer at the HTL/perovskite interface not only reduces the interfacial defects and improves the interfacial contact,but also leads to increased perovskite crystallinity,while the top KCl layer at the perovskite/ETL interface efficiently passivates the perovskite top surface defects and facilitates electron extraction at this interface.Thus,suppressed nonradiative recombination and faster charge extraction at both interfaces close to the perovskite layer can be achieved by using our DIP-KCl strategy.As a result,inverted PSCs based on DIP-KCl present an increased efficiency from 17.1% to 19.2% and enhanced stability,retaining over 90% of their initial efficiency after aging at maximum power point tracking for 1000 h.This work provides a simple and efficient way for defect passivation to further increase the efficiency and stability of PSCs.

Microstructure of stainless steel weld in double-sided arc welding

Double-sided arc welding with a single power source can effectively increase the weld penetration, diminish distortion, improve welding speed and save energy. Compared to conventional arc welding processes, double-sided arc welding can generate a penetrating electromaguetic field to help to form fine dendritic microstrueture in the weld due to the symmetry of heating. Type 1Cr1SNi9Ti aastenitic stainless steel was bead-on-plate welded with double-sided arc welding and conventional plasma arc welding processes, respectively, and microstructure in the weld, heat-affected zone and base metal were examined. After analyzing the black carbon-enriched band in the weld during plasma arc welding with electron probe microanalyzer （ EPMA ） and X-ray diffraction （XRD） technology, it was found that the black band was shaped from the aggregation of ferrite in the fasion boundary. Hardness measurement showed that this black band does not apparently affect the microhardncss distribution in the weld.

Theoretical and experimental study of a bi-stable piezoelectric energy harvester under hybrid galloping and band-limited random excitations

In the practical environment,it is very common for the simultaneous occurrence of base excitation and crosswind.Scavenging the combined energy of vibration and wind with a single energy harvesting structure is fascinating.For this purpose,the effects of the wind speed and random excitation level are investigated with the stochastic averaging method(SAM)based on the energy envelope.The results of the analytical prediction are verified with the Monte-Carlo method(MCM).The numerical simulation shows that the introduction of wind can reduce the critical excitation level for triggering an inter-well jump and make a bi-stable energy harvester(BEH)realize the performance enhancement for a weak base excitation.However,as the strength of the wind increases to a particular level,the influence of the random base excitation on the dynamic responses is weakened,and the system exhibits a periodic galloping response.A comparison between a BEH and a linear energy harvester(LEH)indicates that the BEH demonstrates inferior performance for high-speed wind.Relevant experiments are conducted to investigate the validity of the theoretical prediction and numerical simulation.The experimental findings also show that strong random excitation is favorable for the BEH in the range of low wind speeds.However,as the speed of the incoming wind is up to a particular level,the disadvantage of the BEH becomes clear and evident.