采用多个P IN管设计并制作了一种串/并联结构的宽带高隔离度微带单刀双掷(s ing le po le doub le throw,SPDT)开关.首先建立了所用型号的P IN管开路、短路的等效电路模型;然后借助于CAD软件Serenade进行了电路仿真和参数优化,得到了很...采用多个P IN管设计并制作了一种串/并联结构的宽带高隔离度微带单刀双掷(s ing le po le doub le throw,SPDT)开关.首先建立了所用型号的P IN管开路、短路的等效电路模型;然后借助于CAD软件Serenade进行了电路仿真和参数优化,得到了很好的仿真结果;最后设计出电路制版图并制作了经济实用的微带开关,经过实验测量达到了技术指标要求.展开更多
1.0μm gate-length GaAs-based MHEMTs have been fabricated by MBE epitaxial material and contact-mode lithography technology. Pt/Ti/Pt/Au and Ti/Pt/Au were evaporated to form gate metals. Excellent DC and RF performanc...1.0μm gate-length GaAs-based MHEMTs have been fabricated by MBE epitaxial material and contact-mode lithography technology. Pt/Ti/Pt/Au and Ti/Pt/Au were evaporated to form gate metals. Excellent DC and RF performances have been obtained, and the transconductance, maximum saturation drain current density, threshold voltage, current cut-off frequency,and maximum oscillation frequency of Pt/Ti/Pt/Au and Ti/Pt/Au MHEMTs were 502 （503） mS/mm, 382（530）mA/mm,0.1（ - 0.5）V,13.4（14.8）GHz,and 17.0（17.5）GHz,respectively. DC-10GHz single-pole double-throw （SPDT） switch MMICs have been designed and fabricated by Ti/Pt/Au MHEMTs. Insertion loss,isolation,input,and out- put return losses of SPDT chips were better than 2.93,23.34,and 20dB.展开更多
Design and simulation results of a novel multifunctional electronic calibration kit based on microelectromechanical system(MEMS)single-pole double-throw(SPDT)switches are presented in this paper.The short-open-load-th...Design and simulation results of a novel multifunctional electronic calibration kit based on microelectromechanical system(MEMS)single-pole double-throw(SPDT)switches are presented in this paper.The short-open-load-through(SOLT)calibration states can be completed simultaneously by using the MEMS electronic calibration,and the electronic calibrator can be reused 10^(6) times.The simulation results show that this novel electronic calibration can be used in a frequency range of 0.1 GHz–20 GHz,the return loss is less than 0.18 dB and 0.035 dB in short-circuit and open-circuit states,respectively,and the insertion loss in through(thru)state is less than 0.27 dB.On the other hand,the size of this novel calibration kit is only 6 mm×2.8 mm×0.8 mm.Our results demonstrate that the calibrator with integrated radiofrequency microelectromechanical system(RF MEMS)switches can not only provide reduced size,loss,and calibration cost compared with traditional calibration kit but also improves the calibration accuracy and efficiency.It has great potential applications in millimeter-wave measurement and testing technologies,such as device testing,vector network analyzers,and RF probe stations.展开更多
文摘采用多个P IN管设计并制作了一种串/并联结构的宽带高隔离度微带单刀双掷(s ing le po le doub le throw,SPDT)开关.首先建立了所用型号的P IN管开路、短路的等效电路模型;然后借助于CAD软件Serenade进行了电路仿真和参数优化,得到了很好的仿真结果;最后设计出电路制版图并制作了经济实用的微带开关,经过实验测量达到了技术指标要求.
文摘1.0μm gate-length GaAs-based MHEMTs have been fabricated by MBE epitaxial material and contact-mode lithography technology. Pt/Ti/Pt/Au and Ti/Pt/Au were evaporated to form gate metals. Excellent DC and RF performances have been obtained, and the transconductance, maximum saturation drain current density, threshold voltage, current cut-off frequency,and maximum oscillation frequency of Pt/Ti/Pt/Au and Ti/Pt/Au MHEMTs were 502 （503） mS/mm, 382（530）mA/mm,0.1（ - 0.5）V,13.4（14.8）GHz,and 17.0（17.5）GHz,respectively. DC-10GHz single-pole double-throw （SPDT） switch MMICs have been designed and fabricated by Ti/Pt/Au MHEMTs. Insertion loss,isolation,input,and out- put return losses of SPDT chips were better than 2.93,23.34,and 20dB.
基金Project supported by the National Defense Technology Industry Strong,China (Grant No. JCKY2018408B006)the Information System New Items Project,China (Grant Nos. 2018XW0026 and 2019XW0010)the Information System Pre-research Project,China (Grant No. 31513060101)
文摘Design and simulation results of a novel multifunctional electronic calibration kit based on microelectromechanical system(MEMS)single-pole double-throw(SPDT)switches are presented in this paper.The short-open-load-through(SOLT)calibration states can be completed simultaneously by using the MEMS electronic calibration,and the electronic calibrator can be reused 10^(6) times.The simulation results show that this novel electronic calibration can be used in a frequency range of 0.1 GHz–20 GHz,the return loss is less than 0.18 dB and 0.035 dB in short-circuit and open-circuit states,respectively,and the insertion loss in through(thru)state is less than 0.27 dB.On the other hand,the size of this novel calibration kit is only 6 mm×2.8 mm×0.8 mm.Our results demonstrate that the calibrator with integrated radiofrequency microelectromechanical system(RF MEMS)switches can not only provide reduced size,loss,and calibration cost compared with traditional calibration kit but also improves the calibration accuracy and efficiency.It has great potential applications in millimeter-wave measurement and testing technologies,such as device testing,vector network analyzers,and RF probe stations.
