[Objective] The aim was to compare effects of three curing techniques （Chinese tobacco curing-method for improving tobacco quality and fragrance, Chi-nese （three-phase） tobacco curing technique, and Zimbabwe tobac...[Objective] The aim was to compare effects of three curing techniques （Chinese tobacco curing-method for improving tobacco quality and fragrance, Chi-nese （three-phase） tobacco curing technique, and Zimbabwe tobacco curing tech-nique） on quality of tobacco and to select optimal curing method. [Method] In Peng-shui county in Chongqing, tobacco variety K326 was chosen as test materials to conduct tobacco curing tests as per three techniques to analyze key components of raw tobacco, grade quality and evaluation quality. [Result] The content of starch in tobacco was reduced by Chinese tobacco curing-method for improving tobacco quality and fragrance, and the ratio of middle and high quality grade tobaccos improved by 1.8%-7.95%; average price increased by 1.64-3.21 yuan/kg; evaluation grade grew by 1.5-4.4. The technique is proved in enhancing tobacco fragrance quality and quantity as wel as improving and adjusting fragrance, taste and flavor. [Conclusion] Chinese （three-phase） tobacco curing technique improves tobacco quality and provides references for production demonstration areas of tobacco curing.展开更多
[Objective]This study aimed to optimize the conditions for curing tobacco leaf, so as to improve its flavor and quality. [Method] Leaves of Yuanyan 87 were col ected and cured by three different techniques （moderate-...[Objective]This study aimed to optimize the conditions for curing tobacco leaf, so as to improve its flavor and quality. [Method] Leaves of Yuanyan 87 were col ected and cured by three different techniques （moderate-intensity conditions throughout the curing course; high-intensity conditions at leaf yel owing and wilting stages, moderate-intensity conditions at leaf drying and vein drying stages; high-in-tensity conditions throughout the curing course）, and then the contents of 48 aroma substances and taste indices of the finished tobacco leaves were measured. [Result] The contents of 28 aroma substances in the tobacco leaves cured under high-inten-sity conditions throughout the course were higher and the taste indices of these to-bacco leaves were better, compared with those flue-cured by the other two tech-niques. The contents of the other 20 aroma substances were not significantly af-fected by the curing techniques. The second best technique was high-intensity con-ditions at leaf yel owing and wilting stages and moderate-intensity conditions at leaf drying and vein drying stages. Curing tobacco leaves at moderate-intensity condi-tions throughout the course was the worst one. [Conclusion] Compared with the oth-er two methods, the contents of aroma substances and taste indices of the tobacco leaves cured under high-intensive conditions throughout the course were the best.展开更多
Concrete structures in main coal cleaning plants have been rebuilt and reinforced in the coal mines of the Shanghai Datun Energy Sources Co. Ltd., the first colliery of the Pingdingshan Coal Co. Ltd. and the Sanhejian...Concrete structures in main coal cleaning plants have been rebuilt and reinforced in the coal mines of the Shanghai Datun Energy Sources Co. Ltd., the first colliery of the Pingdingshan Coal Co. Ltd. and the Sanhejian mine of the Xuzhou Mining Group Co. Ltd. In these projects, the operating environment and reliability of concrete structures in the main plants of the three companies were investigated and the safety of the structures inspected. Qualitative and quantitative analyses were made on the special natural, technological and mechanical environments around the structures. On the basis of these analyses, we discuss the long-term, combined actions of the harsh natural (corrosive gases, liquids and solids) and mechanical environments on concrete structures and further investigated the damage and deteriorating mechanisms and curing techniques of concrete structures in the main coal cleaning plants. Our study can provide a theoretical basis for ensuring the reliability of concrete structures in main coal cleaning plants.展开更多
[Objective]The aim was to explore effects of curing technique parameters on chemical components and aromatic material accumulation to formulate a suitable curing technique and for and to achieve tobacco scalding, dryi...[Objective]The aim was to explore effects of curing technique parameters on chemical components and aromatic material accumulation to formulate a suitable curing technique and for and to achieve tobacco scalding, drying and giving aromat- ic flavor. [Method] With tobacco variety KRK 26 as test materials, the test involved parameters of three curing-techniques in down, middle and upper parts of flue-cured tobaccos in an oven to measure chemical components and aromatic substances in tobaccos. [Result] The effects of curing techniques on total sugar and reducing sug- ar differed upon temperature and humidity. The contents of chemical components, such as total alkaloid, total N and the ratio of sugar/ alkali by moderate temperature and high humidity technique were of significant differences with those by moderate temperature and moderate humidity technique and with low temperature and low hu- midity technique; the chemical components by moderate temperature and moderate humidity were of insignificant differences with the treatment by low temperature and low humidity technique. Total amount of aroma components by different curing tech- niques from high to low was the treatment by low temperature and low humidity technique （461.72 μg/g）, the treatment by moderate temperature and moderate hu- midity technique （450.06μg/g） and the treatment by moderate temperature and high humidity technique （385.12μg/g）, suggesting the content of aromatic substances is high at low temperature and low humidity. [Conclusion] Moderate temperature and high humidity curing technique has significant effects on total alkaloid, total N and the ratio of sugar/ alkali of tobaccos and different curing techniques also affect the total amount of aromatic substances of flue-cured tobaccos.展开更多
Considering that copper mine tailings(CMTs)are commonly mixed with ordinary Portland cement,fly ash(FA),and kaolin to produce geopolymers,to make full use of CMTs,the properties of geopolymers manufactured under diffe...Considering that copper mine tailings(CMTs)are commonly mixed with ordinary Portland cement,fly ash(FA),and kaolin to produce geopolymers,to make full use of CMTs,the properties of geopolymers manufactured under different material mass ratios and curing methods(standard curing,water bath curing,and 60℃curing)are evaluated with significantly increased dosage of CMTs.Porosity and unconfined compressive strength tests,X-ray diffraction,field emission scanning electron microscopy,and energy dispersive spectroscopy are used to determine the physical and mechanical properties,microstructure,and mineral composition of geopolymers.Finally,costs and CO 2 emissions of specimens with different material mass ratios during the preparation processes are compared.The results show that during the geopolymerization of low-calcium materials,various geopolymer gels,including calcium silicate,calcium silicoaluminate,and mainly sodium silicoaluminate gels,coexist.The solid waste,cost,and carbon dioxide emission reductions can reach 100%,166.3 yuan/t,and 73.3 kg/t,respectively.Under a curing condition of 60℃,the sample with a CMTs mass fraction of 70%and an FA mass fraction of 30%meets the requirements of porosity,compressive strength.The resource utilization of CMT and FA is realized in a more economical way.展开更多
基金Supported by China National Tobacco Corporation General Project[(2012)No.122]Chongqing Branch Company S&T Project of China National Tobacco Corporation(NY20110601070010)~~
文摘[Objective] The aim was to compare effects of three curing techniques （Chinese tobacco curing-method for improving tobacco quality and fragrance, Chi-nese （three-phase） tobacco curing technique, and Zimbabwe tobacco curing tech-nique） on quality of tobacco and to select optimal curing method. [Method] In Peng-shui county in Chongqing, tobacco variety K326 was chosen as test materials to conduct tobacco curing tests as per three techniques to analyze key components of raw tobacco, grade quality and evaluation quality. [Result] The content of starch in tobacco was reduced by Chinese tobacco curing-method for improving tobacco quality and fragrance, and the ratio of middle and high quality grade tobaccos improved by 1.8%-7.95%; average price increased by 1.64-3.21 yuan/kg; evaluation grade grew by 1.5-4.4. The technique is proved in enhancing tobacco fragrance quality and quantity as wel as improving and adjusting fragrance, taste and flavor. [Conclusion] Chinese （three-phase） tobacco curing technique improves tobacco quality and provides references for production demonstration areas of tobacco curing.
基金Supported by the General Program of Science and Technology Research of ChinaNational Tobacco Corporation[(2012)122]Science and Technology Research Programof Chongqing Branch of China National Tobacco Corporation(NY20110601070010)~~
文摘[Objective]This study aimed to optimize the conditions for curing tobacco leaf, so as to improve its flavor and quality. [Method] Leaves of Yuanyan 87 were col ected and cured by three different techniques （moderate-intensity conditions throughout the curing course; high-intensity conditions at leaf yel owing and wilting stages, moderate-intensity conditions at leaf drying and vein drying stages; high-in-tensity conditions throughout the curing course）, and then the contents of 48 aroma substances and taste indices of the finished tobacco leaves were measured. [Result] The contents of 28 aroma substances in the tobacco leaves cured under high-inten-sity conditions throughout the course were higher and the taste indices of these to-bacco leaves were better, compared with those flue-cured by the other two tech-niques. The contents of the other 20 aroma substances were not significantly af-fected by the curing techniques. The second best technique was high-intensity con-ditions at leaf yel owing and wilting stages and moderate-intensity conditions at leaf drying and vein drying stages. Curing tobacco leaves at moderate-intensity condi-tions throughout the course was the worst one. [Conclusion] Compared with the oth-er two methods, the contents of aroma substances and taste indices of the tobacco leaves cured under high-intensive conditions throughout the course were the best.
基金Project BK2008128 supported by the Natural Science Foundation of Jiangsu Province
文摘Concrete structures in main coal cleaning plants have been rebuilt and reinforced in the coal mines of the Shanghai Datun Energy Sources Co. Ltd., the first colliery of the Pingdingshan Coal Co. Ltd. and the Sanhejian mine of the Xuzhou Mining Group Co. Ltd. In these projects, the operating environment and reliability of concrete structures in the main plants of the three companies were investigated and the safety of the structures inspected. Qualitative and quantitative analyses were made on the special natural, technological and mechanical environments around the structures. On the basis of these analyses, we discuss the long-term, combined actions of the harsh natural (corrosive gases, liquids and solids) and mechanical environments on concrete structures and further investigated the damage and deteriorating mechanisms and curing techniques of concrete structures in the main coal cleaning plants. Our study can provide a theoretical basis for ensuring the reliability of concrete structures in main coal cleaning plants.
基金Supported by China National Tobacco Corporation General Project(〔2012〕122)Chongqing Branch Company S&T Project of China National Tobacco Corporation(NY20110601070010)~~
文摘[Objective]The aim was to explore effects of curing technique parameters on chemical components and aromatic material accumulation to formulate a suitable curing technique and for and to achieve tobacco scalding, drying and giving aromat- ic flavor. [Method] With tobacco variety KRK 26 as test materials, the test involved parameters of three curing-techniques in down, middle and upper parts of flue-cured tobaccos in an oven to measure chemical components and aromatic substances in tobaccos. [Result] The effects of curing techniques on total sugar and reducing sug- ar differed upon temperature and humidity. The contents of chemical components, such as total alkaloid, total N and the ratio of sugar/ alkali by moderate temperature and high humidity technique were of significant differences with those by moderate temperature and moderate humidity technique and with low temperature and low hu- midity technique; the chemical components by moderate temperature and moderate humidity were of insignificant differences with the treatment by low temperature and low humidity technique. Total amount of aroma components by different curing tech- niques from high to low was the treatment by low temperature and low humidity technique （461.72 μg/g）, the treatment by moderate temperature and moderate hu- midity technique （450.06μg/g） and the treatment by moderate temperature and high humidity technique （385.12μg/g）, suggesting the content of aromatic substances is high at low temperature and low humidity. [Conclusion] Moderate temperature and high humidity curing technique has significant effects on total alkaloid, total N and the ratio of sugar/ alkali of tobaccos and different curing techniques also affect the total amount of aromatic substances of flue-cured tobaccos.
基金The National Natural Science Foundation of China(No.41877240)Scientific Research Foundation of Graduate School of Southeast University(No.YBPY1930).
文摘Considering that copper mine tailings(CMTs)are commonly mixed with ordinary Portland cement,fly ash(FA),and kaolin to produce geopolymers,to make full use of CMTs,the properties of geopolymers manufactured under different material mass ratios and curing methods(standard curing,water bath curing,and 60℃curing)are evaluated with significantly increased dosage of CMTs.Porosity and unconfined compressive strength tests,X-ray diffraction,field emission scanning electron microscopy,and energy dispersive spectroscopy are used to determine the physical and mechanical properties,microstructure,and mineral composition of geopolymers.Finally,costs and CO 2 emissions of specimens with different material mass ratios during the preparation processes are compared.The results show that during the geopolymerization of low-calcium materials,various geopolymer gels,including calcium silicate,calcium silicoaluminate,and mainly sodium silicoaluminate gels,coexist.The solid waste,cost,and carbon dioxide emission reductions can reach 100%,166.3 yuan/t,and 73.3 kg/t,respectively.Under a curing condition of 60℃,the sample with a CMTs mass fraction of 70%and an FA mass fraction of 30%meets the requirements of porosity,compressive strength.The resource utilization of CMT and FA is realized in a more economical way.
