Effects of Atmospheric Pressure on Developmental Characteristics and the Stability of Air Entraining Agent for Concrete

In order to ascertain the effects of atmospheric pressure on developmental characteristics and the stability of AEA(air-entraining agent)solution bubbles,AEA solution experiments and AEA solution bubble experiments were,respectively,conducted in Peking(50 m,101.2 kPa)and Lhasa(3,650 m,63.1 kPa).Surface tensions and inflection-point concentrations were tested based on AEA solutions,whilst developmental characteristics,thicknesses and elastic coefficients of liquid films were tested based on air bubbles of AEA solutions.The study involved three types of AEAs,which were TM-O,226A,and 226S.The experimental results show that initial sizes of TM-O,226A,and 226S are,respectively,increased by 43.5%,17.5%,and 3.8%.With the decrease of ambient pressure,the drainage rate and the drainage index of AEA solution bubbles increase.Interference experiments show that the liquid film thicknesses of all tested AEA solution bubbles are in micron scales.When the atmospheric pressure decreases from 101.2 to 63.1 kPa,the liquid film thicknesses of three types of AEA solutions decrease in various degrees;and film elasticities at critical thicknesses increase.Liquid film of 226S solution bubbles is the most stable,presenting as a minimum thickness variation.It should be noted that elastic coefficient of liquid film only represents the level at critical thickness,thus it can not be applied as the only evaluating indicator of bubble stability.For a type of AEA,factors affecting the stability of its bubbles under low atmospheric pressure include initial bubbles size,liquid film thickness,liquid film elasticity,ambient temperature,etc.

Influence of bias voltage and oxygen addition on the discharge aspects of a diffuse argon plume in an atmospheric pressure plasma jet

A remote plasma,also referred to as a plasma plume(diffuse or filamentary),is normally formed downstream of an atmospheric pressure plasma jet.In this study,a diffuse plume is formed by increasing the bias voltage(U_(b))applied to the downstream electrode of an argon plasma jet excited by a negatively pulsed voltage.The results indicate that the plume is filamentary when U_(b)is low,which transits to the diffuse plume with increasing U_(b).The discharge initiated at the rising edge of the pulsed voltage is attributed to the diffuse plume,while that at the falling edge contributes to the filament in the plume.For the diffuse plume,the discharge intensity decreases with the increasing oxygen content(C_o).Fast photography reveals that the diffuse plume results from a negative streamer,which has a dark region near the nozzle with C_o=0%.However,the dark region is absent with C_o=0.5%.From the optical emission spectrum,the electron density,electron excitation temperature,gas temperature,and oxygen atom concentration are investigated.

Discharge and mass transfer characteristics of atmospheric pressure gas-solid two-phase gliding arc

In this work,a gas-solid two-phase gliding arc discharge(GS-GAD)reactor was built.Gliding arc was formed in the gap between the blade electrodes,and solid powder was deposited on the sieve plate positioned beneath the blade electrodes.A range of experimental parameters,including the inter-electrode spacing,gas flow rate,applied voltage,and the type of the powder,were systematically varied to elucidate the influence of solid powder matter on the dynamics of gliding arc discharge(GAD).The discharge images were captured by ICCD and digital camera to investigate the mass transfer characteristics of GS-GAD,and the electrical parameters,such as the effective values of voltage,current,and discharge power were record to reveal the discharge characteristics of GS-GAD.The results demonstrate that powder undergoes spontaneous movement towards the upper region of the gliding arc due to the influence of electric field force.Increasing the discharge voltage,decreasing relative dielectric constant of the powder and reducing the electrode-to-sieve-plate distance all contribute to a greater involvement of powder in the GAD process,subsequently resulting in an enhanced powder concentration within the GAD region.Additionally,powder located beneath the gliding arc experiences downward resistance caused by the opposing gas flow and arc.Excessive gas flow rate notably hampers the powder concentration within the discharge region,and the velocity of powder motion in the upper part of the GAD region is reduced.Under the condition of electrode-to-sieve-plate distance of 30 mm,gas flow rate of 1.5 L/min,and peak-to-peak voltage of 31 kV,the best combination of arc gliding and powder spark discharge phenomena can be achieved with the addition of Al_(2)O_(3) powder.

A comparative study on the spectral characteristics of nanosecond pulsed discharges in atmospheric He and a He+2.3%H_(2)O mixture

Nanosecond pulsed discharges at atmospheric pressure in a pin-to-pin electrode configuration are well reproducible in time and space, which is beneficial to the fundamentals and applications of low-temperature plasmas. In this experiment, the discharges in helium(He) and He with 2.3%water vapor(H_(2)O) are driven by a series of 10 ns overvoltage pulses(~13 k V). Special attention is paid to the spectral characteristics obtained in the center of discharges by time-resolved optical emission spectroscopy. It is found that in helium, the emission of atomic and molecular helium during the afterglow is more intense than that in the active discharge, while in the He+2.3%H_(2)O mixture, helium emission is only observed during the discharge pulse and the molecular helium emission disappears. In addition, the emissions of OH(A-X) and Hα present similar behavior that increases sharply during the falling edge of the voltage pulse as the electrons cool down rapidly. The gas temperature is set to remain low at 540 K by fitting the OH(A-X) band. A comparative study on the emission of radiative species(He, He_(2), OH and H)is performed between these two discharge cases to derive their main production mechanisms. In both cases, the dominant primary ion is He^(+) at the onset of discharges, but their He^(+) charge transfer processes are quite different. Based on these experimental data and a qualitative discussion on the discharge kinetics, with regard to the present discharge conditions, it is shown that the electron-assisted three-body recombination processes appear to be the significant sources of radiative OH and H species in high-density plasmas.

Value of negative pressure sealing drainage on wound healing of Gustilo IIIB and IIIC open fractures

BACKGROUND Gustilo III fractures have a high incidence and are difficult to treat.Patients often experience difficulty in wound healing.Negative pressure drainage technology can help shorten wound healing time and has positive value in improving patient prognosis.AIM To explore the clinical value of the negative pressure sealing drainage technique in wound healing of Gustilo IIIB and IIIC open fractures.METHODS Eighty patients with Gustilo IIIB and IIIC open fractures with skin and soft tissue injuries who were treated in the Second People’s Hospital of Dalian from March 2019 to December 2021 were selected as the research subjects.They were divided into a study group(n=40,healed with negative pressure closed drainage)and a control group(n=40,healed with conventional dressing changes)according to the variation in the healing they received.The efficacy of the clinical interventions,the variations in the regression indicators(time to wound healing,time to fracture healing,time to hospitalization),and the conversion and healing of bacterial wounds were compared 1-3 mo after the intervention.RESULTS The total effective rate of patients among the study group was 95.00%(38/40),which was notably higher than 75.00%(30/40)among the control group(P<0.05).The wound healing time,fracture healing time,and hospital stay of the patients in the study group was shorter than the control group(P<0.05).After the intervention,the negative bacterial culture at the wound site rate and wound healing rate of the patients among the study group increased compared to the control group(P<0.05).CONCLUSION Negative pressure sealing and drainage technology has a good therapeutic effect on patients with Gustilo IIIB and IIIC open fracture wounds with skin and soft tissue injury.It can notably enhance the wound healing rate and the negative rate of bacteria on the wound surface and help to speed up the recovery process of patients.

Reactions in a Mixture of CH_4 and CO_2 under the Action of Microwave Discharge at Atmospheric Pressure

Reactions between CH_4 and CO_2 under the action of continuous microwave discharge at atmospheric pressure were studied in a special homemade reactor. The main products were CO and H2, while acetylene and ethylene were also found in the products. Experimental results show that conversions of CH4 and CO2 could be higher than 90% without the presence of any catalyst. Effects of CO2/CH4 molar ratio and total flow rate of the feed gas on the reaction were also investigated.

Comparison of the efficacy and safety of ultrasonic cycloplasty vs valve implantation and anti-VEGF for the treatment of fundus disease-related neovascular glaucoma

·AIM: To compare the clinical efficacy and safety of ultrasonic cycloplasty(UCP) vs Ahmed glaucoma drainage valve implantation(ADV) in addition to intravitreal antivascular endothelial growth factor(VEGF) for treatment of fundus disease-related neovascular glaucoma(NVG).·METHODS: A total of 43 patients(45 eyes) with NVG secondary to fundus diseases underwent anti-VEGF combined with UCP or ADV from August 2020 to March 2022 were enrolled in this retrospective cohort study. Of them, 14 patients(15 eyes) were treated with both UCP and anti-VEGF as the UCP group and 29 patients(30 eyes) treated with both ADV and anti-VEGF as the ADV group. The success of the treatment was defined as intraocular pressure(IOP) between 11-20 mm Hg with or without using IOP-lowering drugs. IOP measurement, IOP lowering drugs at baseline and follow-ups period and complications were recorded.·RESULTS: The average age was 63.03±9.95 and 52.27±12.89y in ADV and UCP groups, respectively(P=1.947). The fundus pathology included proliferative diabetic retinopathy in 42 eyes and retinal vein occlusion in 3 eyes. All eyes in both groups achieved successful treatment at 3mo. While the success rate was 90.0%(27/30) in the ADV group and 86.7%(13/15) in the UCP group at the last follow-up of 6mo(P>0.05). IOP was significantly lower with reduction of drug use than the baseline in both groups(both P<0.05). And the ADV group needed fewer anti-glaucoma drops than the UCP group from 1d to 3mo. The comfort scores of patients in the ADV group were significantly lower than those in the UCP group in the first week after the operation(P<0.05).·CONCLUSION: UCP is an alternative to the ADV with the same efficacy but non-invasive for the treatment of NVG.

Synthesis of methyl N-phenyl carbamate from dimethyl carbonate and 1,3-diphenyl urea under mild conditions

Synthesis of methyl N-phenyl carbamate from dimethyl carbonate and 1,3-diphenyl urea was investigated under atmospheric pressure. The results showed that homogenous catalyst sodium methoxide had the excellent activity to efficiently catalyze the synthesis of methyl N-phenyl carbamate under atmospheric pressure.

Kinetics Characteristics and Bremsstrahlung of Argon DC Discharge Under Atmospheric Pressure

An improved self-consistent, multi-component, and one-dimensional plasma model for simulating atmospheric pressure argon glow discharge is presented. In the model, both the plasma hydrodynamics model and chemical model are considered. The numerical simulation is carried out for parallel-plate geometry with a separation of 0.06 cm. The results show that Ar＊ plays a major role in the discharge, which is mainly produced by ground state excitation reaction. The electron temperature reaches its maximum in the cathode sheath but maintains a low value （0.23 eV） in bulk plasma. Elastic collision is the dominant volumetric electron energy loss in atmosphere argon glow discharge, which is negligible in low pressure argon glow discharge. The metastable step-wise ionization is the main mechanism for electron production to sustain the discharge. However, the highest contribution to electron production rate is ground state ionization reaction. The bremsstrahlung power density is related to electric voltage. With the increase of the electric voltage, the bremsstrahlung power density increases, namely, the strength of ultraviolet radiation spectrum enhances in the cathode sheath.

The influence of pressure waves in tidal gravity records

For the reduction of atmospheric effects,observed gravity has initially been corrected by using the computed barometric admittance k of the in situ measured pressure,expressed in nms-2/hPa units and estimated by least squares method.However,the local pressure changes alone cannot account for the atmospheric mass attraction and loading when the coherent pressure field exceeds a specific size,i.e.,with increasing periodicities.To overcome this difficulty,it is necessary to compute the total atmospheric effect at each station using the global pressure field.However,the direct subtraction of the total gravity effect,provided by the models of pressure correction,is not yet satisfactory for S2 and other tidal components,such as K2 and P1,which include solar heating pressure tides.This paper identifies the origin of the problem and presents strategies to obtain a satisfactory solution.First,we set up a difference vector between the tidal factors of M2 and S2 after correction of the pressure and ocean tides effects.This vector,hereafter denoted as RES,presents the advantage of being practically insensitive to calibration errors.The minimum discrepancy between the tidal parameters of M2 and S2 corresponds to the minimum of the RES vector norm d.Secondly we adopt the hybrid pressure correction method,separating the local and the global pressure contribution of the models and replacing the local contribution by the pressure measured at the station multiplied by an admittance kATM.We tested this procedure on 8 stations from the IGETS superconducting gravimeters network(former GGP network).For stations at an altitude lower than 1000 m,the value of dopt is always smaller than0.0005.The discrepancy between the tidal parameters of the M2 and S2 waves is always lower than0.05% on the amplitude factors and 0.025° on the phases.For these stations,a correlation exists between the altitude and the value kopt.The results at the three Central European stations Conrad,Pecny and Vienna are in excellent agreement(0.05%) with the DDW99NH model for all the main tidal waves.

Effect of periodic wide atmospheric pressure change on CO emission in closed goaf

Atmospheric pressure fuctuation is one of the most important factors afecting the climate environment and gas emission in the fre area.To obtain the infuence rule of the surface atmospheric pressure change on the gas sampling and abnormal emission in the mine closed goaf,the No.1 coal mine in Dananhu was taken as the research object.Using Fourier transform and Fisher harmonic analysis and other statistical methods,the infuence of the periodic variation of atmospheric pressure on the gas leakage and outfow in the closed goaf was studied.The results showed that there were three atmospheric pressure periods of 15.2 d,1 d and 182.2 d,and the probability was greater than 95%.The time period with the highest number of atmospheric pressure peaks was 7:00–8:00,which accounted for 20.2%of total occurrence number in a day.And the time periods with the highest number of atmospheric pressure trough were 2:00,15:00 and 16:00,accounting for 27.4%.The peak-to-trough transition time was mainly concentrated around 6 h,and the diurnal variation curve of atmospheric pressure was mainly bimodal.The atmospheric pressure change rate was mostly concentrated in 10–50 Pa/h.It was determined that the distance that the gas sampling pipe was pre-laid into the inner side of the closed wall should be greater than 44.4 m,and the CO concentration and atmospheric pressure in the closed goaf were both periodic and negative with atmospheric pressure.The research results have important guiding signifcance for the monitoring,early warning and environmental protection of the goaf.

Under the surface:Pressure-induced planetary-scale waves,volcanic lightning,and gaseous clouds caused by the submarine eruption of Hunga Tonga-Hunga Ha'apai volcano

We present a narrative of the eruptive events culminating in the cataclysmic January 15, 2022 eruption of Hunga Tonga-Hunga Ha’apai Volcano by synthesizing diverse preliminary seismic, volcanological, sound wave, and lightning data available within the first few weeks after the eruption occurred. The first hour of eruptive activity produced fast-propagating tsunami waves, long-period seismic waves, loud audible sound waves, infrasonic waves, exceptionally intense volcanic lightning and an unsteady volcanic plume that transiently reached-at 58km-the Earth’s mesosphere. Energetic seismic signals were recorded worldwide and the globally stacked seismogram showed episodic seismic events within the most intense periods of phreatoplinian activity, and they correlated well with the infrasound pressure waveform recorded in Fiji. Gravity wave signals were strong enough to be observed over the entire planet in just the first few hours, with some circling the Earth multiple times subsequently. These large-amplitude, long-wavelength atmospheric disturbances come from the Earth’s atmosphere being forced by the magmatic mixture of tephra, melt and gasses emitted by the unsteady but quasicontinuous eruption from 0402±1–1800 UTC on January 15, 2022. Atmospheric forcing lasted much longer than rupturing from large earthquakes recorded on modern instruments, producing a type of shock wave that originated from the interaction between compressed air and ambient(wavy) sea surface. This scenario differs from conventional ideas of earthquake slip, landslides, or caldera collapse-generated tsunami waves because of the enormous(~1000x) volumetric change due to the supercritical nature of volatiles associated with the hot,volatile-rich phreatoplinian plume. The time series of plume altitude can be translated to volumetric discharge and mass flow rate. For an eruption duration of ~12 h, the eruptive volume and mass are estimated at 1.9 km^(3) and~2 900 Tg, respectively, corresponding to a VEI of 5–6 for this event. The high frequency and intensity of lightning was enhanced by the production of fine ash due to magma-seawater interaction with concomitant high charge per unit mass and the high pre-eruptive concentration of dissolved volatiles. Analysis of lightning flash frequencies provides a rapid metric for plume activity and eruption magnitude. Many aspects of this eruption await further investigation by multidisciplinary teams. It represents a unique opportunity for fundamental research regarding the complex, non-linear behavior of high energetic volcanic eruptions and attendant phenomena, with critical implications for hazard mitigation, volcano forecasting, and first-response efforts in future disasters.

The Role of Metastable Atoms in a Homogeneous Atmospheric Pressure Barrier Discharge in Helium

A one-dimensional fluid model for homogeneous atmospheric pressure barrier discharges in helium is presented by considering elementary processes of excitation and ionization including a metastable atom effect. Using this model we investigate the behaviours of the helium metastable atoms in discharges as well as their influence on the discharge characteristics. It is shown that the metastable atoms with a relatively high concentration during the discharge are mainly produced in the active phase of the discharge and dissolved in the off phase. It is also found that the metastable atom collisions can not only provide seed electrons for discharges but also influence the concentration of ions. A reduction of matestable atom density results in a drop in the charged particle densities and causes a qualitative change in the discharge patterns.

Influence of Wellbore Trajectory on Pressure Drop and Fluid Discharge

An experimental analysis has been conducted to study the process of fluid accumulation for different borehole trajectories.More specifically,five heel angles have been experimentally realized to simulate the borehole trajectory of the sloping section of the formation.The fluid-carrying capacity,pressure drop and fluid discharge volatility have been investigated for these conditions and,accordingly,the relationship between heel angle and wellbore pressure drop fluid-carrying capacity has been determined.The results show that while the reasonable roll angle can increase the pressure loss in the wellbore,it is beneficial to drainage.In terms of pressure loss and liquid-carrying capacity,when the heeling angle is 50°,the latter is increased while the former becomes very high,which indicates that when drilling and completing wells on site,a 50°roll angle should be avoided.It is found that the main reason for the increase of the total pressure drop in the wellbore is the increase of the local pressure loss in the inclined section.From the perspective of drainage stability,when there is heeling in the inclined section of the horizontal well,the fluctuation of the wellbore drainage tends to be enhanced.Through the comparison of the Beggs-Brill(B-B)and Mukherjee-Brill liquid holdup methods,it is found that B-B method better predicts liquid holdup.A new method for calculating the pressure drop in the inclined section in the presence of lateral inclination is obtained by taking into account the pressure drop in the curved section.Through comparison with experimental data,it is found that the error is within 20%,and the prediction accuracy is high.

Atmospheric pressure pulsed modulated arc discharge plasma

Direct-current(DC)arc plasma has great application values in the field of the chemical industry,but it has the problem of low energy efficiency.Facing the requirement for improving the energy efficiency of the arc,this paper proposes a unique method of pulsed modulated arc(PMA).This method uses high-frequency pulses and reduces the arc current to improve the control of electron temperature.The electrical characteristics,optical characteristics and products are tested.The test results show that during the PMA process,all of the experimental results which include voltage,current and light will significantly increase.These results are analyzed from the perspective of functionality,repeatability and energy conversion.The analysis results show that although the PMA method does not show good parameter consistency,it has potential application prospects because it increases the energy conversion rate by 4.5%and 8%from the perspective of light and products,respectively.

Compared discharge characteristics and film modifications of atmospheric pressure plasma jets with two different electrode geometries

Atmospheric pressure plasma jet shows great potential for polymer film processing. The electrode geometry is the key factor to determine discharge characteristics and film modification of jets. In this paper, we compared the discharge characteristics and the film modifications of atmospheric pressure plasma jets with needle-ring electrode(NRE) and doublering electrode(DRE). The results show that jet with NRE has stronger electric field intensity and higher discharge power,making it present more reactive oxygen particles and higher electron temperature, but its discharge stability is insufficient.In contrast, the jet with DRE has uniform electric field distribution of lower field intensity, which allows it to maintain stable discharge over a wide range of applied voltages. Besides, the modification results show that the treatment efficiency of PET film by NRE is higher than that by DRE. These results provide a suitable atmospheric pressure plasma jets device selection scheme for polymer film processing process.

Characteristics of DBD micro-discharge at different pressure and its effect on the performance of oxygen plasma reactor

The oxygen plasma reactor based on dielectric barrier discharge principle can produce a high concentration of reactive oxygen species,which can cooperate with hydraulic cavitation gas-liquid mixer to realize the application of advanced oxidation technology in water treatment.In this technology,the work pressure of the oxygen plasma reactor is decreased by the vacuum suction effect generated in the snap-back section of the gas-liquid mixed container.In this paper,the characteristics of single micro-discharge at different pressures were investigated with the methods of discharge image,electrical characteristics and spectral diagnosis,in order to analyze the electrical characteristics and reactive oxygen species generation efficiency of oxygen plasma reactor at the pressure range from 60 kPa to 100 kPa.The study indicated that,when the pressure decreases,the duty ratio of ionization in the discharge gap and number of electrons with high energy increases,leading to a rise in reactive oxygen species production.When the oxygen reaches the maximum ionization,the concentration of reactive oxygen species is the highest.Then,the discharge intensity continues to increase,producing more heat,which will decompose the ozone and lower the production of reactive oxygen species.The oxygen plasma reactor has an optimum working pressure at different input powers,which makes the oxygen plasma reactor the most efficient in generating reactive oxygen species.

A two-dimensional air streamer discharge modified model based on artificial stability term under non-uniform electric field at low temperature and sub-atmospheric pressure

In this paper, an improved air discharge fluid model under non-uniform electric field is constructed based on the plasma module COMSOL Multiphysics with artificial stability term, and the boundary conditions developed in the previous paper are applied to the calculation of photoionization rate. Based on the modified model, the characteristics of low temperature subatmospheric air discharge under 13 kV direct current voltage are discussed, including needle-plate and needle-needle electrode structures. Firstly, in order to verify the reliability of the model, a numerical example and an experimental verification were carried out for the modified model respectively. Both verification results show that the model can ensure the accuracy and repeatability of the calculation. Secondly, according to the calculation results of the modified model, under the same voltage and spacing, the reduced electric field under low temperature subatmosphere pressure is larger than that under normal temperature and atmospheric pressure. The high electric field leads to the air discharge at low temperature and sub atmospheric pressure entering the streamer initiation stage earlier, and has a faster propagation speed in the streamer development stage, which shortens the overall discharge time. Finally, the discharge characteristics of the two electrode structures are compared, and it is found that the biggest difference between them is that there is a pre-ionization region near the cathode in the needle-needle electrode structure. When the pre-ionization level reaches 1013 cm-3, the propagation speed of the positive streamer remains unchanged throughout the discharge process, and is no longer affected by the negative streamer. The peak value of electric field decreases with the increase of pre-ionization level, and tends to be constant during streamer propagation. Based on the previous paper, this paper constructs the air discharge model under non-uniform electric field, complements with the previous paper, and forms a relatively complete set of air discharge simulation system under low temperature and sub atmospheric pressure, which provides a certain reference for future research.

The interaction of an atmospheric pressure plasma jet using argon or argon plus hydrogen peroxide vapour addition with bacillus subtilis

This paper reports that an atmospheric pressure dielectric barrier discharge plasma jet, which uses argon or argon ＋ hydrogen peroxide vapour as the working gas, is designed to sterilize the bacillus subtilis. Compared with the pure argon plasma, the bacterial inactivation efficacy has a significant improvement when hydrogen peroxide vapour is added into the plasma jet. In order to determine which factors play the main role in inactivation, several methods are used, such as determination of optical emission spectra, high temperature dry air treatment, protein leakage quantification, and scanning electron microscope. These results indicate that the possible inactivation mechanisms are the synergistic actions of chemically active species and charged species.

The effects of radio frequency atmospheric pressure plasma and thermal treatment on the hydrogenation of TiO_(2) thin film

The effects of radio frequency(RF)atmospheric pressure(AP)He/H_(2)plasma and thermal treatment on the hydrogenation of TiO_(2)thin films were investigated and compared in this work.The color of the original TiO_(2)film changes from white to black after being hydrogenated in He/H_(2)plasma at160 W(gas temperature~381℃)within 5 min,while the color of the thermally treated TiO_(2)film did not change significantly even in pure H_(2)or He/H_(2)atmosphere with higher temperature(470℃)and longer time(30 min).This indicated that a more effective hydrogenation reaction happened through RF AP He/H_(2)plasma treatment than through pure H_(2)or He/H_(2)thermal treatment.The color change of TiO_(2)film was measured based on the Commission Internationale d’Eclairage L*a*b*color space system.Hydrogenated TiO_(2)film displayed improved visible light absorption with increased plasma power.The morphology of the cauliflower-like nanoparticles of the TiO_(2)film surface remained unchanged after plasma processing.X-ray photoelectron spectroscopy results showed that the contents of Ti3+species and Ti-OH bonds in the plasma-hydrogenated black TiO_(2)increased compared with those in the thermally treated TiO_(2).X-ray diffraction(XRD)patterns and Raman spectra indicated that plasma would destroy the crystal structure of the TiO_(2)surface layer,while thermal annealing would increase the overall crystallinity.The different trends of XRD and Raman spectra results suggested that plasma modification on the TiO_(2)surface layer is more drastic than on its inner layer,which was also consistent with transmission electron microscopy results.Optical emission spectra results suggest that numerous active species were generated during RF AP He/H_(2)plasma processing,while there were no peaks detected from thermal processing.A possible mechanism for the TiO_(2)hydrogenation process by plasma has been proposed.Numerous active species were generated in the bulk plasma region,accelerated in the sheath region,and bumped toward the TiO_(2)film,which will react with the TiO_(2)surface to form OVs and disordered layers.This leads to the tailoring of the band gap of black TiO_(2)and causes its light absorption to extend into the visible region.