The quality of real time traffic information is of the great importance, therefore the factors having effect on traffic characteristics are analyzed in general, and the necessities of real time data processing are sum...The quality of real time traffic information is of the great importance, therefore the factors having effect on traffic characteristics are analyzed in general, and the necessities of real time data processing are summarized. The identification and reconstruction of real time traffic data are analyzed using Kalman filter equation and statistical approach. Four methods for ITS (Intelligent transportation system) detector data screening in traffic management systems are discussed in detail. Meanwhile traffic data examinations are discussed with solutions formulated through analysis, and recommendations are made for information collection and data management in future.展开更多
Cervical cancer remains a critically important problem for women, especially those women in the developing world where the case-fatality rate is high. There are an estimated 528,000 cases and 266,000 deaths worldwide....Cervical cancer remains a critically important problem for women, especially those women in the developing world where the case-fatality rate is high. There are an estimated 528,000 cases and 266,000 deaths worldwide. Established screening and detection programs in the developed world have lowered the mortality from 40/100,000 to 2/100,000 over the last 60 years. The standard of care has been and continues to be: a screening Papanicolaou smear with or without Human Papilloma Virus (HPV) testing;followed by colposcopy and biopsies and if the smear is abnormal;and followed by treatment if the biopsies show high grade disease (cervical intraepithelial neoplasia (CIN) grades 2 and 3 and Carcinoma-in-situ). Low grade lesions (Pap smears with Atypical Cells of Uncertain Significance (ASCUS), Low Grade Squamous Intraepithelial Lesions (LGSIL), biopsies showing HPV changes or showing CIN 1);are usually followed for two years and then treated if persistent. Treatment can be performed with loop excision, LASER, or cryotherapy. Loop excision yields a specimen which can be reviewed to establish the diagnosis more accurately. LASER vaporizes the lesion and cryotherapy leads to tissue destruction. Under long term study;loop excision, LASER, and cryotherapy have the same rate of cure. The standard of care is expensive and takes 6 - 12 weeks for the individual patient. During the last twenty years, new technologies that can view the cervix and even image the cervix with cellular resolution have been developed. These technologies could lead to a new paradigm in which diagnosis and treatment occurs at a single visit. These technologies include fluorescence and reflectance spectroscopy (probe or wide-field, whole cervix scanning approaches) and fluorescence confocal endomicroscopy or high resolution micro-endoscopy. Both technologies have received Federal Drug Administration (FDA) and have been commercialized. Research trials continue to show their remarkable performance. These technologies are reviewed and clinical trials are summarized. Emerging technologies are coming along that may compete with those already approved and include optical coherence tomography, optical coherence tomography with autofluorescence, diffuse optical microscopy, and dual mode micro-endoscopy. These technologies are also reviewed and where available, clinical data is reported. Optical technologies are ready to diffuse into clinical practice because they will save money and 3 or 4 visits in the developed world and offer the same standard of care to the developing world where more cervical cancer exists.展开更多
Intellectualization of sheet metal in deep drawing is a new combined technology, which is concerned with control science and computer science and sheet metal forming theory. The intelligent control system for sheet me...Intellectualization of sheet metal in deep drawing is a new combined technology, which is concerned with control science and computer science and sheet metal forming theory. The intelligent control system for sheet metal deep drawing consists of four fundamental factors: real time measurement, identification, prediction and control. Real time identification of material properties and friction coefficient is the most important factor in the whole system. An artificial neural network model for identification of the material properties and friction coefficient was established according to deep drawing characteristics and more automation. The identification of the material properties and friction coefficient was realized.展开更多
Key techniques to improve the quality of developing Web-based engineering drawing CAI software are discussed and some experience in applying commercial tools for generating vector drawing, concise representation of 3D...Key techniques to improve the quality of developing Web-based engineering drawing CAI software are discussed and some experience in applying commercial tools for generating vector drawing, concise representation of 3D solids, real-time interactive animation, data management etc. is illustrated. A Web-based Engineering Drawing CAI software 'Solid Projection' has been implemented by using these techniques.展开更多
We aimed to establish for the rapid detection of morphine,O6‑monoacetylmorphine,heroin,codeine,cocaine,methamphetamine,ketamine,methadone,and dolantin in human blood and urine by direct analysis in real‑time coupled w...We aimed to establish for the rapid detection of morphine,O6‑monoacetylmorphine,heroin,codeine,cocaine,methamphetamine,ketamine,methadone,and dolantin in human blood and urine by direct analysis in real‑time coupled with tandem mass spectrometry(DART‑MS/MS).These samples were extracted by acetonitrile‑methanol(V/V=4:1),using DART 12 Dip‑it automatic sampling system.They were injected at 400℃,and analyzed by positive ion and multiple reaction monitoring mode.The detection limits of morphine,O6‑Monoacetylmorphine,heroin,codeine,cocaine,methamphetamine,ketamine,methadone,and dolantin were 100,50,50,100,20,20,10,1,and 0.01 ng/mL,respectively.The practical cases contained methamphetamine,codeine,cocaine,and O6‑monoacetylmorphine were detected accurately and rapidly.The method has the advantages of high sensitivity and good accuracy.The sample processing is simple and can be analyzed in a short time.This method is suitable for the analysis of morphine,O6‑monoacetylmorphine,heroin,codeine,cocaine,methamphetamine,ketamine,methadone,and dolantin in some practical cases.展开更多
文摘The quality of real time traffic information is of the great importance, therefore the factors having effect on traffic characteristics are analyzed in general, and the necessities of real time data processing are summarized. The identification and reconstruction of real time traffic data are analyzed using Kalman filter equation and statistical approach. Four methods for ITS (Intelligent transportation system) detector data screening in traffic management systems are discussed in detail. Meanwhile traffic data examinations are discussed with solutions formulated through analysis, and recommendations are made for information collection and data management in future.
文摘Cervical cancer remains a critically important problem for women, especially those women in the developing world where the case-fatality rate is high. There are an estimated 528,000 cases and 266,000 deaths worldwide. Established screening and detection programs in the developed world have lowered the mortality from 40/100,000 to 2/100,000 over the last 60 years. The standard of care has been and continues to be: a screening Papanicolaou smear with or without Human Papilloma Virus (HPV) testing;followed by colposcopy and biopsies and if the smear is abnormal;and followed by treatment if the biopsies show high grade disease (cervical intraepithelial neoplasia (CIN) grades 2 and 3 and Carcinoma-in-situ). Low grade lesions (Pap smears with Atypical Cells of Uncertain Significance (ASCUS), Low Grade Squamous Intraepithelial Lesions (LGSIL), biopsies showing HPV changes or showing CIN 1);are usually followed for two years and then treated if persistent. Treatment can be performed with loop excision, LASER, or cryotherapy. Loop excision yields a specimen which can be reviewed to establish the diagnosis more accurately. LASER vaporizes the lesion and cryotherapy leads to tissue destruction. Under long term study;loop excision, LASER, and cryotherapy have the same rate of cure. The standard of care is expensive and takes 6 - 12 weeks for the individual patient. During the last twenty years, new technologies that can view the cervix and even image the cervix with cellular resolution have been developed. These technologies could lead to a new paradigm in which diagnosis and treatment occurs at a single visit. These technologies include fluorescence and reflectance spectroscopy (probe or wide-field, whole cervix scanning approaches) and fluorescence confocal endomicroscopy or high resolution micro-endoscopy. Both technologies have received Federal Drug Administration (FDA) and have been commercialized. Research trials continue to show their remarkable performance. These technologies are reviewed and clinical trials are summarized. Emerging technologies are coming along that may compete with those already approved and include optical coherence tomography, optical coherence tomography with autofluorescence, diffuse optical microscopy, and dual mode micro-endoscopy. These technologies are also reviewed and where available, clinical data is reported. Optical technologies are ready to diffuse into clinical practice because they will save money and 3 or 4 visits in the developed world and offer the same standard of care to the developing world where more cervical cancer exists.
文摘Intellectualization of sheet metal in deep drawing is a new combined technology, which is concerned with control science and computer science and sheet metal forming theory. The intelligent control system for sheet metal deep drawing consists of four fundamental factors: real time measurement, identification, prediction and control. Real time identification of material properties and friction coefficient is the most important factor in the whole system. An artificial neural network model for identification of the material properties and friction coefficient was established according to deep drawing characteristics and more automation. The identification of the material properties and friction coefficient was realized.
文摘Key techniques to improve the quality of developing Web-based engineering drawing CAI software are discussed and some experience in applying commercial tools for generating vector drawing, concise representation of 3D solids, real-time interactive animation, data management etc. is illustrated. A Web-based Engineering Drawing CAI software 'Solid Projection' has been implemented by using these techniques.
基金This research was supported by the Project for Strengthening the Police Force with Science and Technology(project number 2018GABJC29).
文摘We aimed to establish for the rapid detection of morphine,O6‑monoacetylmorphine,heroin,codeine,cocaine,methamphetamine,ketamine,methadone,and dolantin in human blood and urine by direct analysis in real‑time coupled with tandem mass spectrometry(DART‑MS/MS).These samples were extracted by acetonitrile‑methanol(V/V=4:1),using DART 12 Dip‑it automatic sampling system.They were injected at 400℃,and analyzed by positive ion and multiple reaction monitoring mode.The detection limits of morphine,O6‑Monoacetylmorphine,heroin,codeine,cocaine,methamphetamine,ketamine,methadone,and dolantin were 100,50,50,100,20,20,10,1,and 0.01 ng/mL,respectively.The practical cases contained methamphetamine,codeine,cocaine,and O6‑monoacetylmorphine were detected accurately and rapidly.The method has the advantages of high sensitivity and good accuracy.The sample processing is simple and can be analyzed in a short time.This method is suitable for the analysis of morphine,O6‑monoacetylmorphine,heroin,codeine,cocaine,methamphetamine,ketamine,methadone,and dolantin in some practical cases.
