Control of aliphatic halogenated DBP precursors with multiple drinking water treatment processes： Formation potential and integrated toxicity

The comprehensive control efficiency for the formation potentials（FPs） of a range of regulated and unregulated halogenated disinfection by-products（DBPs）（including carbonaceous DBPs（C-DBPs）, nitrogenous DBPs（N-DBPs）, and iodinated DBPs（I-DBPs）） with the multiple drinking water treatment processes, including pre-ozonation, conventional treatment（coagulation–sedimentation, pre-sand filtration）, ozone-biological activated carbon（O_3-BAC） advanced treatment, and post-sand filtration, was investigated. The potential toxic risks of DBPs by combing their FPs and toxicity values were also evaluated.The results showed that the multiple drinking water treatment processes had superior performance in removing organic/inorganic precursors and reducing the formation of a range of halogenated DBPs. Therein, ozonation significantly removed bromide and iodide,and thus reduced the formation of brominated and iodinated DBPs. The removal of organic carbon and nitrogen precursors by the conventional treatment processes was substantially improved by O_3-BAC advanced treatment, and thus prevented the formation of chlorinated C-DBPs and N-DBPs. However, BAC filtration leads to the increased formation of brominated C-DBPs and N-DBPs due to the increase of bromide/DOC and bromide/DON.After the whole multiple treatment processes, the rank order for integrated toxic risk values caused by these halogenated DBPs was haloacetonitriles（HANs）》haloacetamides（HAMs） 〉haloacetic acids（HAAs） 〉 trihalomethanes（THMs） 〉 halonitromethanes（HNMs） 》I-DBPs（I-HAMs and I-THMs）. I-DBPs failed to cause high integrated toxic risk because of their very low FPs. The significant higher integrated toxic risk value caused by HANs than other halogenated DBPs cannot be ignored.

Method to assess component contribution to toxicity of complex mixtures： Assessment of puberty acquisition in rats exposed to disinfection byproducts

A method based on regression modeling was developed to discern the contribution of component chemicals to the toxicity of highly complex, environmentally realistic mixtures of disinfection byproducts（DBPs）. Chemical disinfection of drinking water forms DBP mixtures.Because of concerns about possible reproductive and developmental toxicity, a whole mixture（WM） of DBPs produced by chlorination of a water concentrate was administered as drinking water to Sprague–Dawley（S–D） rats in a multigenerational study. Age of puberty acquisition,i.e., preputial separation（PPS） and vaginal opening（VO）, was examined in male and female offspring, respectively. When compared to controls, a slight, but statistically significant delay in puberty acquisition was observed in females but not in males. WM-induced differences in the age at puberty acquisition were compared to those reported in S–D rats administered either a defined mixture（DM） of nine regulated DBPs or individual DBPs. Regression models were developed using individual animal data on age at PPS or VO from the DM study. Puberty acquisition data reported in the WM and individual DBP studies were then compared with the DM models. The delay in puberty acquisition observed in the WM-treated female rats could not be distinguished from delays predicted by the DM regression model, suggesting that the nine regulated DBPs in the DM might account for much of the delay observed in the WM. This method is applicable to mixtures of other types of chemicals and other endpoints.