This paper aims to present the experimental result obtained from dynamic response on flee-flee beam in driving point and transfer mobility analysis using impact test method using hammer tips that are steel, plastic an...This paper aims to present the experimental result obtained from dynamic response on flee-flee beam in driving point and transfer mobility analysis using impact test method using hammer tips that are steel, plastic and rubber. The 8630C accelerometer and analyzer is used for data logging and for the analysis, the plastic hammer tip is chosen. The analytical and the experimental value then are compared for the free-free beam natural frequency, damping ratio, and stiffness value. As a result, the highest percentage error for natural frequency is approximated to 2.7%, the damping ratio is approximated to 3.115 × 10^-3 and the stiffness value gives the major different between the experiment value and theoretical value. Finally, this method can be used to determine the properties of a structure such as natural frequency, mode shapes, damping ration and stiffness, respectively.展开更多
Investigation of the vertical vibration characteristics of the seated human body is beneficial for the design and development of vehicle ride comfort.In this study,we first established models of the seated human body ...Investigation of the vertical vibration characteristics of the seated human body is beneficial for the design and development of vehicle ride comfort.In this study,we first established models of the seated human body with two,three and four degrees of freedom(DOF).Then,the vibration characteristics of 30 volunteers were tested under standard conditions with a vibration test rig to obtain data for the apparent mass,driving point mechanical impedance,and seat-to-head transfer function.Based on the experimental data,the parameters of these models are identified and the results show that the four-DOF model can simulate the vertical vibration characteristics of the seated human body more comprehensively.Then,different seated human body models were applied to optimize the damping of shock absorber.The results show that the optimized damping with the four-DOF Chinese seated human body model is 27%more than that with rigid mass and 7%less than that with ISO 5982:2001 seated human body model.展开更多
文摘This paper aims to present the experimental result obtained from dynamic response on flee-flee beam in driving point and transfer mobility analysis using impact test method using hammer tips that are steel, plastic and rubber. The 8630C accelerometer and analyzer is used for data logging and for the analysis, the plastic hammer tip is chosen. The analytical and the experimental value then are compared for the free-free beam natural frequency, damping ratio, and stiffness value. As a result, the highest percentage error for natural frequency is approximated to 2.7%, the damping ratio is approximated to 3.115 × 10^-3 and the stiffness value gives the major different between the experiment value and theoretical value. Finally, this method can be used to determine the properties of a structure such as natural frequency, mode shapes, damping ration and stiffness, respectively.
文摘Investigation of the vertical vibration characteristics of the seated human body is beneficial for the design and development of vehicle ride comfort.In this study,we first established models of the seated human body with two,three and four degrees of freedom(DOF).Then,the vibration characteristics of 30 volunteers were tested under standard conditions with a vibration test rig to obtain data for the apparent mass,driving point mechanical impedance,and seat-to-head transfer function.Based on the experimental data,the parameters of these models are identified and the results show that the four-DOF model can simulate the vertical vibration characteristics of the seated human body more comprehensively.Then,different seated human body models were applied to optimize the damping of shock absorber.The results show that the optimized damping with the four-DOF Chinese seated human body model is 27%more than that with rigid mass and 7%less than that with ISO 5982:2001 seated human body model.
