Energy-absorbing rockbolts have been widely adopted in burst-prone excavation support, and their serviceability is closely related to the frequency and magnitude of seismic events. In this research, the splittube drop...Energy-absorbing rockbolts have been widely adopted in burst-prone excavation support, and their serviceability is closely related to the frequency and magnitude of seismic events. In this research, the splittube drop test with varying impact energy was conducted to reproduce the dynamic performance of MP1rockbolts under a wide range of seismic event magnitudes. The test results showed that the impact process could be subdivided into four distinct stages, i.e. mobilization, strain hardening, plastic flow(ductile), and rebound stage, of which strain hardening and plastic flow are the primary energy absorbing stages. As the impact energy per drop increases from 8.1 to 46.7 k J, the strain rate of the shank varies between 1.20 and 2.70 s^(-1), and the average impact load is between 240 and 270kN, which may be considered as constant. The MP1 rockbolt has a cumulative maximum energy absorption(CMEA) of 31.9–40.0 k J/m, with an average of 35.0 k J/m, and the elongation rate is 11.4%–14.7%, with an average of 12.7%, both of which are negatively correlated with the impact energy per drop. Regression analysis shows that energy absorption and shank elongation, as well as momentum input and impact duration,conform to the linear relationship. The complete dynamic capacity envelope of MP1 rockbolts is proposed, which reflects the dynamic bearing capacity, elongation, and distinct stages. This study is helpful to better understand the dynamic characteristics of energy-absorbing rockbolts and assist design engineers in robust reinforcement systems design to mitigate rockburst damage in seismically active underground excavations.展开更多
A virtual thermal test system was built through the co-simulation using Simulink and Comsol to realize the complete virtualization of the thermal test.Using the co-simulation technology,comprehensive simulation analys...A virtual thermal test system was built through the co-simulation using Simulink and Comsol to realize the complete virtualization of the thermal test.Using the co-simulation technology,comprehensive simulation analysis of the control system,electric field and thermal field was realized.The data state of each observation point could be directly observed at one time,including the output state information of the power amplifier,the output state information of the heater,and the thermal state information of the test unit.The virtual thermal test system has a predictive and guiding role for engineering thermal tests,and can realize thermal environment simulation beyond the existing thermal environment ground simulation capabilities,providing a basis for the development of future models.展开更多
A control and test system of a landing gear drop test rig is developed considering the drop test specifica- tions for the ＂Seagull 300＂ multi-functional amphibious airplane. In order to realize the automation of dro...A control and test system of a landing gear drop test rig is developed considering the drop test specifica- tions for the ＂Seagull 300＂ multi-functional amphibious airplane. In order to realize the automation of drop test process, a servo system is proposed and programmable logic controller（PLC） technology is used. Several key technologies for measuring the horizontal load, the vertical load and the transient rotational speed are studied. According to the requirements of CCAR-23-R3, the drop test of landing gears of the ＂Seagull 300＂ airplane is accomplished. Test results show that the system has a high accuracy of data collection. The system is stable and reliable. The drop test satisfies the requirements of the drop test specifications and the results can be used as the certification of airworthiness for this kind of airplane.展开更多
A separation phenomenon occurring during the drop weight tear test of commercial thick-walled API （American Petroleum Institute） X80 strip steel was investigated in this work. Microstructural analysis showed that th...A separation phenomenon occurring during the drop weight tear test of commercial thick-walled API （American Petroleum Institute） X80 strip steel was investigated in this work. Microstructural analysis showed that the band structure of bainite elongated along the rolling direction works as the initiation sites of separation. The propagation of separation can be promoted not only by the occurrence of the band structure of martensite/austenite constituent, prior austenite grain boundaries, and elongated bainite, but also by fine acicular ferrite and bainite. Wide separation formed in the former case, while the narrow one appeared in the latter case. acicular ferrite in thick-walled X80 pipeline steel in order Some methods were proposed to obtain fine and homogeneous to minimize the occurrence of separation.展开更多
[Objectives] This study was conducted to establish a method for microbial limit test of Compound Yu E Nose Drops.[Methods] According to the Chinese Pharmacopoei (General Rules in the fourth part of the 2015 edition),t...[Objectives] This study was conducted to establish a method for microbial limit test of Compound Yu E Nose Drops.[Methods] According to the Chinese Pharmacopoei (General Rules in the fourth part of the 2015 edition),the microbial limit test method for Compound Yu E Nose Drops was verified.[Results] Compound Yu E Nose Drops has a strong inhibitory effect on Staphylococcus aureus and Bacillus subtilis,and the inhibitory activity was significantly eliminated after increasing the diluent (1∶ 20).The recoveries were all in the range of 0.5-2.0 when the total quantities of aerobic microbes were determined by the dilution method (1∶ 20).When the total quantities of mould and yeast were determined by the conventional method,the recoveries were both in the range of 0.5-2.0.When examining control bacteria,Escherichia coli,S.aureus and Pseudomonas aeruginosa can all be detected in the test groups by the test liquid dilution method.[Conclusions] For Compound Yu E Nose Drops,the total quantities of aerobic microbe can be counted by the dilution method;the quantities of mould and yeast can be examined by the conventional plate method;and the conventional method can be used for control microbe examination.展开更多
基金CCTEG Coal Mining Research Institute(No.TDKC-2022-MS-01)the National Natural Science Foundation of China(No.52274123)the Mining Education Australia(MEA),Collaborative Research Grant Scheme(No.RS-59041).
文摘Energy-absorbing rockbolts have been widely adopted in burst-prone excavation support, and their serviceability is closely related to the frequency and magnitude of seismic events. In this research, the splittube drop test with varying impact energy was conducted to reproduce the dynamic performance of MP1rockbolts under a wide range of seismic event magnitudes. The test results showed that the impact process could be subdivided into four distinct stages, i.e. mobilization, strain hardening, plastic flow(ductile), and rebound stage, of which strain hardening and plastic flow are the primary energy absorbing stages. As the impact energy per drop increases from 8.1 to 46.7 k J, the strain rate of the shank varies between 1.20 and 2.70 s^(-1), and the average impact load is between 240 and 270kN, which may be considered as constant. The MP1 rockbolt has a cumulative maximum energy absorption(CMEA) of 31.9–40.0 k J/m, with an average of 35.0 k J/m, and the elongation rate is 11.4%–14.7%, with an average of 12.7%, both of which are negatively correlated with the impact energy per drop. Regression analysis shows that energy absorption and shank elongation, as well as momentum input and impact duration,conform to the linear relationship. The complete dynamic capacity envelope of MP1 rockbolts is proposed, which reflects the dynamic bearing capacity, elongation, and distinct stages. This study is helpful to better understand the dynamic characteristics of energy-absorbing rockbolts and assist design engineers in robust reinforcement systems design to mitigate rockburst damage in seismically active underground excavations.
文摘A virtual thermal test system was built through the co-simulation using Simulink and Comsol to realize the complete virtualization of the thermal test.Using the co-simulation technology,comprehensive simulation analysis of the control system,electric field and thermal field was realized.The data state of each observation point could be directly observed at one time,including the output state information of the power amplifier,the output state information of the heater,and the thermal state information of the test unit.The virtual thermal test system has a predictive and guiding role for engineering thermal tests,and can realize thermal environment simulation beyond the existing thermal environment ground simulation capabilities,providing a basis for the development of future models.
基金Supported by the Aviation Science Foundation of China(2009ZA52001)the Research Foundation(20070287033)~~
文摘A control and test system of a landing gear drop test rig is developed considering the drop test specifica- tions for the ＂Seagull 300＂ multi-functional amphibious airplane. In order to realize the automation of drop test process, a servo system is proposed and programmable logic controller（PLC） technology is used. Several key technologies for measuring the horizontal load, the vertical load and the transient rotational speed are studied. According to the requirements of CCAR-23-R3, the drop test of landing gears of the ＂Seagull 300＂ airplane is accomplished. Test results show that the system has a high accuracy of data collection. The system is stable and reliable. The drop test satisfies the requirements of the drop test specifications and the results can be used as the certification of airworthiness for this kind of airplane.
文摘A separation phenomenon occurring during the drop weight tear test of commercial thick-walled API （American Petroleum Institute） X80 strip steel was investigated in this work. Microstructural analysis showed that the band structure of bainite elongated along the rolling direction works as the initiation sites of separation. The propagation of separation can be promoted not only by the occurrence of the band structure of martensite/austenite constituent, prior austenite grain boundaries, and elongated bainite, but also by fine acicular ferrite and bainite. Wide separation formed in the former case, while the narrow one appeared in the latter case. acicular ferrite in thick-walled X80 pipeline steel in order Some methods were proposed to obtain fine and homogeneous to minimize the occurrence of separation.
基金Supported by Traditional Chinese Medicine Modern Technology Industry Research and Development Special Project of Guizhou Province(QKHZYZ[2013]5018)First-class Construction Discipline Project of Guizhou Province(GNYL[2017]008)+1 种基金Traditional Chinese Medicine Characteristic Technology Inheriting Talent Project of State Administration of Traditional Chinese Medicine(GZYYRJH[2019]43)Traditional Chinese Medicine and Ethnic Minority Medicine Technique Research Subject of Guizhou Administrative Bureau of TCM(QZYY2013-75)
文摘[Objectives] This study was conducted to establish a method for microbial limit test of Compound Yu E Nose Drops.[Methods] According to the Chinese Pharmacopoei (General Rules in the fourth part of the 2015 edition),the microbial limit test method for Compound Yu E Nose Drops was verified.[Results] Compound Yu E Nose Drops has a strong inhibitory effect on Staphylococcus aureus and Bacillus subtilis,and the inhibitory activity was significantly eliminated after increasing the diluent (1∶ 20).The recoveries were all in the range of 0.5-2.0 when the total quantities of aerobic microbes were determined by the dilution method (1∶ 20).When the total quantities of mould and yeast were determined by the conventional method,the recoveries were both in the range of 0.5-2.0.When examining control bacteria,Escherichia coli,S.aureus and Pseudomonas aeruginosa can all be detected in the test groups by the test liquid dilution method.[Conclusions] For Compound Yu E Nose Drops,the total quantities of aerobic microbe can be counted by the dilution method;the quantities of mould and yeast can be examined by the conventional plate method;and the conventional method can be used for control microbe examination.
