Droplet size distributions have been investigated with a two-probe system above a rotatingstream tray of 300 mm diameter.The measured distributions are found to follow the upper limitedlognormal distribution with thre...Droplet size distributions have been investigated with a two-probe system above a rotatingstream tray of 300 mm diameter.The measured distributions are found to follow the upper limitedlognormal distribution with three parameters dependent primarily on gas hole F-factor.A probabilitymethod is used to describe the initial state of the droplet population above the tray,and a model fordroplet motion is presented.The results computed with model agree well with experimental data.展开更多
In order to characterize the mechanics of jet breakup, the finite volume formulations were employed to solve the Navier-Stokes equations and continuity equation of jet. The volume of fluid(VOF) method was used to trac...In order to characterize the mechanics of jet breakup, the finite volume formulations were employed to solve the Navier-Stokes equations and continuity equation of jet. The volume of fluid(VOF) method was used to track the free surface of jet. The spray process of the molten Pb63Sn37 alloy was simulated based on the mathematical model by means of FLUENT code. The configuration of jets generated in different disturbance ratios and modulation ratios was obtained. The theoretical results show that the droplets merge together by the number of disturbance ratio N, which agrees with the corresponding picture captured in the experiment. In addition, the droplet streams broken at non-optimal frequency are also uniform according to simulation results, which proves that the A-M disturbance can increase the width of the uniform droplet generating frequency.展开更多
基金Supported by the National and Zhejiang Provincial Natural Science Foundations.
文摘Droplet size distributions have been investigated with a two-probe system above a rotatingstream tray of 300 mm diameter.The measured distributions are found to follow the upper limitedlognormal distribution with three parameters dependent primarily on gas hole F-factor.A probabilitymethod is used to describe the initial state of the droplet population above the tray,and a model fordroplet motion is presented.The results computed with model agree well with experimental data.
基金Project(20070699076) supported by Specialized Research Fund of the Doctoral Program of Higher Education of ChinaProject supported by the Innovation Foundation by Northwestern Polytechnical University, China
文摘In order to characterize the mechanics of jet breakup, the finite volume formulations were employed to solve the Navier-Stokes equations and continuity equation of jet. The volume of fluid(VOF) method was used to track the free surface of jet. The spray process of the molten Pb63Sn37 alloy was simulated based on the mathematical model by means of FLUENT code. The configuration of jets generated in different disturbance ratios and modulation ratios was obtained. The theoretical results show that the droplets merge together by the number of disturbance ratio N, which agrees with the corresponding picture captured in the experiment. In addition, the droplet streams broken at non-optimal frequency are also uniform according to simulation results, which proves that the A-M disturbance can increase the width of the uniform droplet generating frequency.
