Effect of dry-wet cycles on dynamic properties and microstructures of sandstone:Experiments and modelling

Underground pumped storage power plant(UPSP)is an innovative concept for space recycling of abandoned mines.Its realization requires better understanding of the dynamic performance and durability of reservoir rock.This paper conducted ultrasonic detection,split Hopkinson pressure bar(SHPB)impact,mercury intrusion porosimetry(MIP),and backscatter electron observation(BSE)tests to investigate the dynamical behaviour and microstructure of sandstone with cyclical dry-wet damage.A coupling FEM-DEM model was constructed for reappearing mesoscopic structure damage.The results show that dry-wet cycles decrease the dynamic compressive strength(DCS)with a maximum reduction of 39.40%,the elastic limit strength is reduced from 41.75 to 25.62 MPa.The sieved fragments obtain the highest crack growth rate during the 23rd dry-wet cycle with a predictable life of 25 cycles for each rock particle.The pore fractal features of the macropores and micro-meso pores show great differences between the early and late cycles,which verifies the computational statistics analysis of particle deterioration.The numerical results show that the failure patterns are governed by the strain in pre-peak stage and the shear cracks are dominant.The dry-wet cycles reduce the energy transfer efficiency and lead to the discretization of force chain and crack fields.

Exploring the mechanical behavior and microstructure of compacted loess subjected to dry-wet cycles and chemical contamination

Due to climatic factors and rapid urbanization,the soil in the Loess Plateau,China,experiences the coupled effects of dry-wet cycles and chemical contamination.Understanding the mechanical behavior and corresponding microstructural evolution of contaminated loess subjected to dry-wet cycles is essential to elucidate the soil degradation mechanism.Therefore,direct shear and consolidation tests were performed to investigate the variations in mechanical properties of compacted loess contaminated with acetic acid,sodium hydroxide,and sodium sulfate during dry-wet cycles.The mechanical response mechanisms were investigated using zeta potential,mineral chemical composition,and scanning electron microscopy(SEM)tests.The results indicate that the mechanical deterioration of sodium hydroxidecontaminated loess during dry-wet cycles decreases with increasing contaminant concentration,which is mainly attributed to the thickening of the electrical double layer(EDL)by Nat and the precipitation of calcite,as well as the formation of colloidal flocs induced by OH,thus inhibiting the development of large pores during the dry-wet process.In contrast,the attenuation of mechanical properties of both acetic acid-and sodium sulfate-contaminated loess becomes more severe with increasing contaminant concentration,with the latter being more particularly significant.This is primarily due to the reduction of the EDL thickness and the erosion of cement in the acidic environment,which facilitates the connectivity of pores during dry-wet cycles.Furthermore,the salt expansion generated by the drying process of saline loess further intensifies the structural disturbance.Consequently,the mechanical performance of compacted loess is sensitive to both pollutant type and concentration,exhibiting different response patterns in the dry-wet cycling condition.

Effects of dry-wet cycles on the mechanical properties of sandstone with unloading-induced damage

Sandstone is the fundamental material in various engineering and construction projects.However,the mechanical integrity of sandstone can be compromised by initial unloading damage resulting from activities such as engineering excavations.Furthermore,this degradation is further exacerbated under periodic dry-wet environmental conditions.This study investigated the effects of dry-wet cycles and unloading on the mechanical properties of jointed fine sandstone using uniaxial and triaxial compression tests.These tests were performed on rock samples subjected to varying unloading degrees and different numbers of dry-wet cycles.The results demonstrate that with an increase in the unloading degree from 0%to 70%,there is a corresponding decrease in peak stress ranging from 10%to 33%.Additionally,the cohesion exhibits a reduction of approximately 20%to 25%,while the internal friction angle experiences a decline of about 3.5%to 6%.These findings emphasize a significant unloading effect.Moreover,the degree of peak stress degradation in unloading jointed fine sandstone diminishes with an increase in confining pressure,suggesting that confining pressure mitigates the deterioration caused by dry-wet cycles.Additionally,as the number of dry-wet cycles increases,there is a notable decline in the mechanical properties of the sandstone,evidencing significant dry-wet degradation.Utilizing the Drucker Prager criterion,this study establishes a strength criterion and fracture criterion,denoted as σ_(1)(m,n) and K_(T)^(Ⅱ)(m, n), to quantify the combined impacts of dry-wet cycles and unloading on jointed fine sandstone,which provides a comprehensive understanding of its mechanical behavior under such conditions.

Stability analysis of gravity anchor foundation of layered argillaceous sandstone under dry-wet cycles

To investigate the stability of gravity anchors of suspension bridges,in-situ tests of the vertical bearing capacity of the bedrock,shear resistance of the anchor-rock interface,shear resistance of the bedrock were conducted in a suspension bridge project.Under dry-wet cycles,the deterioration law of the mechanical properties of argillaceous sandstone was identified in laboratory tests:the elastic modulus,cohesion and friction of the argillaceous sandstone deteriorated significantly at first few dry-wet cycles and then declined slowly after 10 cycles,ultimately these three mechanical parameters were reduced to about 1/3,1/3,2/3 of the initial value respectively.Moreover,numerical simulation was used to restore in-situ shear tests and a good agreement was obtained.Base on the results of in-situ and laboratory tests,the stability of the gravity anchor foundation under natural conditions and drywet cycles was calculated and its failure modes were analyzed.The results demonstrated that the dry-wet cycles caused uneven settlement of the anchor foundation,resulting in more serious stress concentration in the substrate.The dry-wet cycles remarkably reduced the stability coefficient of the anchor foundation,whose failure mode shifted from overturning failure under natural conditions to sliding failure.When there was weak interlayer in the rock layer,the anti-sliding stability of the anchor foundation was affected drastically.

Effect of Dry-Wet Cycles on the Transport and Mechanical Properties of Cement Mortar Subjected to Sulfate Attack

This study deals with the analysis of the detrimental effects of a“sulfate attack”on cement mortar for different dry-wet cycles.The mass loss,tensile strength,and gas permeability coefficient were determined and analyzed under different exposure conditions.At the same time,nitrogen adsorption(NAD),scanning electron microscopy(SEM),and X-ray diffraction(XRD)techniques were used to analyze the corresponding variations in the microstructure and the corrosion products.The results show that certain properties of the cement mortar evolve differently according to the durations of the dry-wet cycles and that some damage is caused to the mortars in aqueous solution.The pores fill with corrosion products,increasing the mortar specimen mass and tensile strength while reducing the permeability coefficient and pore size distribution.As corrosion proceeds,the crystallization pressure of the corrosion products increases,resulting in a 16%reduction in tensile strength from the initial value and a 2.6-factor increase in the permeability coefficient,indicating sensitivity to sulfate attack damage.Furthermore,the main corrosion products generated in the experiment are gypsum and ettringite.Application of osmotic pressure and extension of the immersion time can accelerate the erosion process.

The law of strength damage and deterioration of jointed sandstone after dry-wet cycles

Under the periodic rise and fall of the water level in the Three Gorges Reservoir in China,the rock mass in the ebb and flow zone of the slope is always in a state of a dry-wet cycle.In order to explore the influence of dry-wet cycle on mechanical properties of jointed sandstone,the triaxial and uniaxial compression tests of dry-wet cycle of jointed sandstone were carried out.For the experiment,four groups of samples with different numbers of joints were set up,and the jointed rock samples were subjected to 20 dry-wet cycles.Using both the triaxial compression test and the Mohr-Coulomb(M-C)rock fracture criterion,the strength envelope of the sandstone samples was fitted,and their strength degradation was further analyzed and studied.The results show that:(1)The peak intensity and elastic modulus of the sandstone samples decrease with increased number of dry-wet cycles.(2)The total deterioration of mechanical properties of intact rock samples is bigger than that of jointed sandstone samples as the number of dry-wet cycles increases.(3)With the increase of confining pressure,the peak intensity of intact sandstone samples increases much more than that of jointed sandstone samples,which indicates that joints and their numbers have obvious influence.(4)Joints and their numbers play an important role in guiding the damage effects of sandstone samples,which weaken the damage caused by dry-wet cycles.Therefore,the envelope of the M-C strength criterion of intact sandstone samples moves more than that of jointed sandstone samples.

The Quantification of Micro-structural Damage of Weak Muddy Intercalation in Dry-wet Cycles Combining in-situ SEM and DIP

In order to reflect truly the damage evolution mechanism of weak muddy intercalation in dry-wet cycles, two typical weak muddy intercalations were selected for dry-wet cycles. The mineral changes of specimens were analyzed via X-ray diffraction after dry-wet cycles. By combining in-situ SEM and digital image processing(DIP), the damage evolution process and damage characteristic parameters of each stage were obtained. The experimental results indicate that the hydration and dissolution of minerals can not be a determinant factor in structure damage. The micro-structural damage is due to disintegration of mineral aggregates, leading to changes in the number and size of cracks and pores. The damage degree of specimens is related to its initial structure, and the micro-structural damage intensifies and finally tends to stabilize with cycle times increased.

Investigation of Sulfate Attack Resistance of Shotcrete under Dry-wet Cycles

In order to research the sulfate attack resistance of shotcrete, the sulfate attack of shotcrete in the presence and absence of steel fiber was experimentally studied by using dry-wet cycle method. Meanwhile, compared with ordinary concrete by the same mixture, the difference of sulfate attack resistance of shotcrete was studied. The experimental results showed that, with dry-wet cycles increasing, the changes of loss rate of relative dynamic elastic modulus and mass loss rate of specimens included three stages： initial descent stage, stable stage, and rapid descent stage, respectively. However, the changes of mechanical properties first increased and then decreased. Furthermore, the corrosion products of shotcrete after sulfate attack were observed by using the method of XRD, thermal analysis, and SEM, respectively, and the failure mode of shotcrete turned from ettringite destruction to ettringite-gypsum comprehensive failure. Meanwhile, the contents of ettringite and gypsum increased with increasing dry-wet cycle. Simultaneously, the stratified powders drilled from shotcrete under 150＇s dry-wet cycle were analyzed for the mineral phase composition and thermal analysis. With the drywet cycle increasing, the content of ettringite first increased and then decreased and tended to stable. However, the determination of gypsum decreased gradually and even to 0 when the depth was more than 12 mm.

Effects of dry-wet cycles on three-dimensional pore structure and permeability characteristics of granite residual soil using X-ray micro computed tomography

Due to seasonal climate alterations,the microstructure and permeability of granite residual soil are easily affected by multiple dry-wet cycles.The X-ray micro computed tomography(micro-CT)acted as a nondestructive tool for characterizing the microstructure of soil samples exposed to a range of damage levels induced by dry-wet cycles.Subsequently,the variations of pore distribution and permeability due to drywet cycling effects were revealed based on three-dimensional(3D)pore distribution analysis and seepage simulations.According to the results,granite residual soils could be separated into four different components,namely,pores,clay,quartz,and hematite,from micro-CT images.The reconstructed 3D pore models dynamically demonstrated the expanding and connecting patterns of pore structures during drywet cycles.The values of porosity and connectivity are positively correlated with the number of dry-wet cycles,which were expressed by exponential and linear functions,respectively.The pore volume probability distribution curves of granite residual soil coincide with the χ^(2)distribution curve,which verifies the effectiveness of the assumption of χ^(2)distribution probability.The pore volume distribution curves suggest that the pores in soils were divided into four types based on their volumes,i.e.micropores,mesopores,macropores,and cracks.From a quantitative and visual perspective,considerable small pores are gradually transformed into cracks with a large volume and a high connectivity.Under the action of dry-wet cycles,the number of seepage flow streamlines which contribute to water permeation in seepage simulation increases distinctly,as well as the permeability and hydraulic conductivity.The calculated hydraulic conductivity is comparable with measured ones with an acceptable error margin in general,verifying the accuracy of seepage simulations based on micro-CT results.

Shot noise analysis on corrosion behavior of zinc alloy (ZnAl4Cul) under dry-wet cycles

The corrosion behaviors of zinc alloy （ZnAl4Cul） in 3.5% （mass fraction） NaCl, 7.3% （mass fraction） Na2SO4 and simulated acid rain solutions were investigated using electrochemical measurements. The potential noise during dry-wet cycle was monitored and analyzed by fast Fourier transform （FFT）, fast wavelet transform （FWT）, shot noise theory and stochastic theory. Cumulative probability curves of event frequency fn indicate that the corrosion events in the dry cycles are greater than those in the wet cycles. Uniform corrosion was observed in the NaCl solution compared with more localized corrosion in the Na2SO4 solution, which is evidenced by FWT and SEM. Conditional events generation rate r（t） for diffusion controlled reactions decreases with increasing the time. r（t） values for uniform corrosion and diffusion controlled process are the largest in the wet cycle in 3.5% NaCl solution. The values of r（t） for pitting corrosion in Na2SO4 solution are observed to become large during spraying periods, and r（t） for pitting corrosion has the largest value in the Na2SO4 solution. The intergranular corrosion of zinc is serious in simulated acid rain solution.

Creep damage properties of sandstone under dry-wet cycles

Rock creep properties can be used to predict the long-term stability in rock engineering.In reservoir bank slopes,sandstones which are frequently used in the bank slope undergoing longterm effects of dry-wet(DW) cycles due to periodic water inundation and drainage may gradually accumulate creep deformation,resulting in rock structure’s damage or even geological hazards such as landslides.To fully investigate the effect of DW cycles on the creep damage properties of sandstone,triaxial creep tests were conducted on saturated sandstone with different DW cycles by using a triaxial rheometer apparatus.The experimental results show that both the instantaneous strain and the stabilized strain increase with the DW cycles.In addition,using the Burgers model,four kinds of functions including an exponentially decreasing function,a linearly decreasing function,a linearly increasing function and an exponentially increasing function were proposed to express the relationships between the shear modulus,viscoelastic parameters of the Burgers model and the deviatoric stress under different DW cycles.Through comparative analysis,it is found that the theoretical curves generated using proposed four kinds of functions are in good agreement with the experimental data.Furthermore,macromorphological and microstructural observations were performed on specimens after various triaxial rheological tests.For samples with small number of DW cycles,approximately X-shaped fracture surfaces were observed in shear failure zones,whereas several shear fractures including obvious axial and horizontal tensile cracks,and flaws were found for samples with relatively large DW cycles due to long-term propagation and evolution of micro-fissures and micro-pores.Furthermore,as the DW cycles increases,the variation in micro-structure of samples after creep failure was summarized into three stages,namely,a stage with good and dense structure,a stage with pore and fissure propagation,and a stage with extensive increase of pores,fissures and loose particles.It is concluded that the combination effect of permeation of water molecules through pores and fissures within sandstone,and the propagation of preexisting pores and fissures owing to the dissolution of mineral particles leads to further deterioration of the mechanical properties of sandstone as the number of DW cycles increases.This study provides a fundamental basis for evaluating the long-term stability of reservoir bank slopes under cyclic fluctuations of water level.

Effect of drying-wetting cycles on pore characteristics and mechanical properties of enzyme-induced carbonate precipitation-reinforced sea sand

Enzyme-induced carbonate precipitation(EICP)is an emanating,eco-friendly and potentially sound technique that has presented promise in various geotechnical applications.However,the durability and microscopic characteristics of EICP-treated specimens against the impact of drying-wetting(D-W)cycles is under-explored yet.This study investigates the evolution of mechanical behavior and pore charac-teristics of EICP-treated sea sand subjected to D-W cycles.The uniaxial compressive strength(UCS)tests,synchrotron radiation micro-computed tomography(micro-CT),and three-dimensional(3D)recon-struction of CT images were performed to study the multiscale evolution characteristics of EICP-reinforced sea sand under the effect of D-W cycles.The potential correlations between microstructure characteristics and macro-mechanical property deterioration were investigated using gray relational analysis(GRA).Results showed that the UCS of EICP-treated specimens decreases by 63.7% after 15 D-W cycles.The proportion of mesopores gradually decreases whereas the proportion of macropores in-creases due to the exfoliated calcium carbonate with increasing number of D-W cycles.The micro-structure in EICP-reinforced sea sand was gradually disintegrated,resulting in increasing pore size and development of pore shape from ellipsoidal to columnar and branched.The gray relational degree suggested that the weight loss rate and UCS deterioration were attributed to the development of branched pores with a size of 100-1000 m m under the action of D-W cycles.Overall,the results in this study provide a useful guidancee for the long-term stability and evolution characteristics of EICP-reinforced sea sand under D-W weathering conditions.

Durable K-ion batteries with 100% capacity retention up to 40,000 cycles

Currently,the major challenge in terms of research on K-ion batteries is to ensure that they possess satisfactory cycle stability and specific capacity,especially in terms of the intrinsically sluggish kinetics induced by the large radius of K+ions.Here,we explore high-performance K-ion half/full batteries with high rate capability,high specific capacity,and extremely durable cycle stability based on carbon nanosheets with tailored N dopants,which can alleviate the change of volume,increase electronic conductivity,and enhance the K+ion adsorption.The as-assembled K-ion half-batteries show an excellent rate capability of 468 mA h g^(−1) at 100 mA g^(−1),which is superior to those of most carbon materials reported to date.Moreover,the as-assembled half-cells have an outstanding life span,running 40,000 cycles over 8 months with a specific capacity retention of 100%at a high current density of 2000 mA g^(−1),and the target full cells deliver a high reversible specific capacity of 146 mA h g^(−1) after 2000 cycles over 2 months,with a specific capacity retention of 113%at a high current density of 500 mA g^(−1),both of which are state of the art in the field of K-ion batteries.This study might provide some insights into and potential avenues for exploration of advanced K-ion batteries with durable stability for practical applications.

A Review on Technologies for the Use of CO2 as a Working Fluid in Refrigeration and Power Cycles

The use of carbon dioxide as a working fluid has been the subject of extensive studies in recent years, particularly in the field of refrigeration where it is at the heart of research to replace CFC and HCFC. Its thermodynamic properties make it a fluid of choice in the efficient use of energy at low and medium temperatures in engine cycles. However, the performance of transcritical CO2 cycles weakens under high temperature and pressure conditions, especially in refrigeration systems;On the other hand, this disadvantage becomes rather interesting in engine cycles where CO2 can be used as an alternative to the organic working fluid in small and medium-sized electrical systems for low quality or waste heat sources. In order to improve the performance of systems operating with CO2 in the field of refrigeration and electricity production, research has made it possible to develop several concepts, of which this article deals with a review of the state of the art, followed by analyzes in-depth and critical of the various developments to the most recent modifications in these fields. Detailed discussions on the performance and technical characteristics of the different evolutions are also highlighted as well as the factors affecting the overall performance of the systems studied. Finally, perspectives on the future development of the use of CO2 in these different cycles are presented.

Jovian Planet Influence on the Forcing of Sunspot Cycles

The history of our solar system has been greatly influenced by the fact that there is a large gas giant planet, Jupiter that has a nearly circular orbit. This has allowed relics of the early solar system formation to still be observable today. Since Jupiter orbits the Sun with a period of approximately 12 years, it has always been thought that this could be connected to the nearly 11-year periodic peak in the number of sunspots observed. In this paper, the Sun and planets are considered to be moving about a center of mass point as the different planets orbit the Sun. This is the action of gravity that holds the solar system together. The center of mass for the Jupiter-Sun system actually lies outside the Sun. The four gas giant planets dominate such effects and the four gas giant Jovian planets can be projected together to determine an effective distance from the Sun’s center. Taken together these effects do seem to function as a sunspot forcing factor with a periodicity very close to 11 years. These predictions are made without consideration of any details of what is happening in the interior of the Sun. From these estimates, sunspot cycle 25 will be expected to peak in about September-October of 2025. Sunspot cycle 26 should peak in the year March of 2037.

Coupling Effect of Cryogenic Freeze-Thaw Cycles and Chloride Ion Erosion Effect in Pre-Cracked Reinforced Concrete

Chloride (Cl−) ion erosion effects can seriously impact the safety and service life of marine liquefied natural gas(LNG) storage tanks and other polar offshore structures. This study investigates the impact of different low-temperaturecycles (20°C, –80°C, and −160°C) and concrete specimen crack widths (0, 0.3, and 0.6 mm) on the Cl−ion diffusion performance through rapid erosion tests conducted on pre-cracked concrete. The results show thatthe minimum temperature and crack width of freeze-thaw cycles enhance the erosive effect of chloride ions. TheCl− ion concentration and growth rate increased with the increasing crack width. Based on the experimental modeland in accordance with Fick’s second law of diffusion, the Cl− ion diffusion equation was modified by introducingcorrection factors in consideration of the freeze-thaw temperature, crack width, and their coupling effect.The experimental and fitting results obtained from this model can provide excellent reference for practical engineeringapplications.

Failure Characteristics of Rock-like Mortar Specimens with Arc-shaped Flaws under Freezing-thaw Cycles and Uniaxial Compression

To investigate the freeze-thaw(F-T)damages and failure characteristics of rock mass with arc-shaped joints in cold regions,three types of cement mortar specimens with different central angles and prefabricated arc-shaped flaws are subjected to uniaxial compressive tests under different F-T cycles.Experimental observations show that the uniaxial compressive strength of specimens are significantly influenced by F-T cycles and their failure modes are mainly affected by the central angleαof the prefabricated flaws.Unlike the specimens with a central angle of 60°,the specimens with a central angle of 120°and 180°have greater curvature of flaws,so tensile cracks occur in the arc-top area of their prefabricated flaws.According to experimental images observed by environmental scanning electron microscope(ESEM),as the number of F-T cycles increases,the deterioration effect of the specimen becomes more obvious,which is specifically reflected in the increase of the mass loss,peak stress loss,and damage variables as a power function,and the peak strain decreases as a quadratic polynomial.According to numerical results using two-dimensional particle flow code(PFC2D),it is found that F-T cycles cause more damage to the specimen in the early stages than in the later ones.The area of the concentrated compressive stress zone in the middle is decreased due to the increased number of F-T cycles,while the area of the surrounding tensile-shear stress zone is increased.The models appear different failure modes due to the release of concentrated stress in different tensile-shear zones.

Impact of wetting-drying cycles and acidic conditions on the soil aggregate stability of yellow‒brown soil

Soil aggregate is the basic structural unit of soil,which is the foundation for supporting ecosystem functions,while its composition and stability is significantly affected by the external environment.This study was conducted to explore the effect of external environment(wetting-drying cycles and acidic conditions)on the soil aggregate distribution and stability and identify the key soil physicochemical factors that affect the soil aggregate stability.The yellow‒brown soil from the Three Gorges Reservoir area(TGRA)was used,and 8 wetting-drying conditions(0,1,2,3,4,5,10 and 15 cycles)were simulated under 4 acidic conditions(pH=3,4,5 and 7).The particle size distribution and soil aggregate stability were determined by wet sieving method,the contribution of environmental factors(acid condition,wetting-drying cycle and their combined action)to the soil aggregate stability was clarified and the key soil physicochemical factors that affect the soil aggregate stability under wetting-drying cycles and acidic conditions were determined by using the Pearson’s correlation analysis,Partial least squares path modeling(PLS‒PM)and multiple linear regression analysis.The results indicate that wetting-drying cycles and acidic conditions have significant effects on the stability of soil aggregates,the soil aggregate stability gradually decreases with increasing number of wetting-drying cycles and it obviously decreases with the increase of acidity.Moreover,the combination of wetting-drying cycles and acidic conditions aggravate the reduction in the soil aggregate stability.The wetting-drying cycles,acidic conditions and their combined effect imposes significant impact on the soil aggregate stability,and the wetting-drying cycles exert the greatest influence.The soil aggregate stability is significantly correlated with the pH,Ca^(2+),Mg^(2+),maximum disintegration index(MDI)and soil bulk density(SBD).The PLS‒PM and multiple linear regression analysis further reveal that the soil aggregate stability is primarily influenced by SBD,Ca^(2+),and MDI.These results offer a scientific basis for understanding the soil aggregate breakdown mechanism and are helpful for clarifying the coupled effect of wetting-drying cycles and acid rain on terrestrial ecosystems in the TGRA.

Interrelationships between Length of the Day, Moon Distance, Phanerozoic Geodynamic Cycles, Tidal Dissipation and Earth’s Core: Review and Analysis

The rotation of the Earth and the related length of the day (LOD) are predominantly affected by tidal dissipation through the Moon and the growth of the Earth’s core. Due to the increased concentration of mass around the rotation axis of the spinning Earth during the growth of the core the rotation should have been accelerated. Controversially the tidal dissipation by the Moon, which is mainly dependent on the availability of open shallow seas and the kind of Moon escape from a nearby position, acts towards a deceleration of the rotating Earth. Measurements of LOD for Phanerozoic and Precambrian times open ways to solve questions concerning the geodynamical history of the Earth. These measurements encompass investigations of growth patterns in fossils and depositional patterns in sediments (Cyclostratigraphy, Tidalites, Stromatolites, Rhythmites). These patterns contain information on the LOD and on the changing distance between Earth and Moon and can be used as well for a discussion about the growth of the Earth’s core. By updating an older paper with its simple approach as well as incorporating newly published results provided by the geoscientific community, a moderate to fast growth of the core in a hot early Earth will be favored controversially to the assumption of a delayed development of the core in an originally cold Earth. Core development with acceleration of Earth’s rotation and the contemporaneous slowing down due to tidal dissipation during the filling of the ocean may significantly interrelate.

Migration and role of zinc in biogeochemical cycles in the Antarctic Ice Sheet and the Southern Ocean

Zinc(Zn),a widespread metal in the Earth’s crust,serves as a crucial nutrient in the Southern Ocean’s primary production.Studies on Zn in Antarctic snow and ice offer insights into the origins of this metal and its transport routes,as well as its impact on the biogeochemical processes within the Antarctic atmosphere–land–ocean system.This review examines research on the spatial and temporal distribution of Zn in Antarctic snow and ice,as well as in Southern Ocean waters.It includes an overview of advanced methods for sampling and analyzing Zn,along with explanations for the observed variations.The review also discusses various sources of Zn as a nutrient to the Southern Ocean.Finally,it addresses prospective issues related to the use of Zn isotopes in identifying atmospheric sources and their biogeochemical effects on the development of the Southern Ocean ecosystem.