Multiple off-axis acoustic vortices generated by dual coaxial vortex beams

As a kind of special acoustic field, the helical wavefront of an acoustic vortex（AV） beam is demonstrated to have a pressure zero with phase singularity at the center in the transverse plane. The orbital angular momentum of AVs can be applied to the field of particle manipulation, which attracts more and more attention in acoustic researches. In this paper,by using the simplified circular array of point sources, dual coaxial AV beams are excited by the even-and odd-numbered sources with the topological charges of l_E and l_O based on the phase-coded approach, and the composite acoustic field with an on-axis center-AV and multiple off-axis sub-AVs can be generated by the superimposition of the AV beams for｜l_E｜ ≠ ｜l_O｜. The generation of edge phase dislocation is theoretically derived and numerically analyzed for l_E=-l_O. The numbers and the topological charges as well as the locations of the center-AV and sub-AVs are demonstrated, which are proved to be determined by the topological charges of the coaxial AV beams. The proposed approach breaks through the limit of only one on-axis AV with a single topological charge along the beam axis, and also provides the feasibility of off-axis particle trapping with multiple AVs in object manipulation.

Effect of process parameters on the morphology of aluminum/copper alloy lap joints by red and blue hybrid laser welding

In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduced for welding.T2 copper and 6063 aluminum thin plates were lap welded by coaxial dual-beam laser welding.The morphology of weld cross section was compared to explore the influence of process parameters on the formation of lap joints.The microstructure characteristics of the weld zone were observed and compared by optical microscope.The results show that the addition of laser beam swing can eliminate the internal pores of the weld.With the increase of the swing width,the weld depth decreases,and the weld width increases first and then decreases.The influence of welding speed on the weld cross section morphology is similar to that of swing width.With the increase of welding speed,the weld width increases first and then decreases,while the weld depth decreases all the time.This is because that the red laser is used as the main heat source to melt the base metals,with the increase of red laser power,the weld depth increases.As an auxiliary laser source,blue laser reduces the total energy consumption,consequently,the effective heat input increases and the spatter is restrained effectively.As a result,the increase of red laser power has an enhancement effect on the weld width and weld depth.When the swing width is 1.2 mm,the red laser power is 550 W,the blue laser power is 500 W,and the welding speed is 35 mm/s,the weld forming is the best.The lap joint of T2 copper and 6063 aluminum alloy thin plate can be connected stably with the hybrid of blue laser.The effect rules of laser beam swing on the weld formation were obtained,which improved the quality of the joints.

Intense Yellow Photoluminescence from Silicon Oxynitride Films Prepared by Dual Ion Beam Sputtering

In this work, results on the study of the structure and photoluminescence (PL) properties of SiOxNy thin films are presented. The films were deposited at room temperature using a dual-ion-beam co-sputtering system. The XRD and TEM results show that the deposited films have an amorphous structure. In the XPS result, we find N 1s spectra consist of one symmetric single peak at 397.8 eV, indicating that the nitrogen atoms are mainly bonded to silicon. It is in agreement to the result of FTIR. In SiOxNy films, an intense single PL peak at 590 nm is observed. Furthermore, with the increase of the N content in the SiOxNy films, the intensity of the PL peak at 590 nm increases a lot. The PL peak of 590 nm is suggested to originate from N-related defects.

Structure and Magnetic Properties of Fe-N Films Prepared by Dual Ion Beam Sputtering

Fe-N films were prepared on Si substrate by dual ion beam sputtering (DIBS). It is found that the crystal structure of the films varies from α-Fe, to ε-Fe2-3N, ε-Fe2-3N +γ-Fe4N, and finally γ'-Fe4N with the increase in substrate temperature (TS). The magnetic properties of the films were investigated by a vibrating sample magnetometer (VSM). The structure of the films is insensitive to the ratios of N2/Ar in main ion source(MIS), and is mainly influenced by the substrate temperature (Ts).

Infrared transition properties of vanadium dioxide thin films across semiconductor-metal transition

Vanadium dioxide thin films were fabricated through annealing vanadium oxide thin films deposited by dual ion beam sputtering. X-ray diffraction （XRD）, atom force microscopy （AFM）, and Fourier transform infrared spectrum （FTIR） were employed to measure the crystalline structure, surface morphology, and infrared optical transmittance. The phase transition properties were characterized by transmittance. The results show that the annealed vanadium oxide thin film is composed of monoclinic VO2, with preferred orientation of （011）. The maximum of transmittance change is beyond 65% as the temperature increases from 20 to 80 C. The reversible changes in optical transmittance against temperature were observed. The change rate of transmittance at short wavelength is higher than that at long wavelength at the same temperature across semiconductor-metal phase transition. This phenomenon was discussed using diffraction effect.