The present work used a methane-air mixture chemical kinetics scheme consisting of 119 elementary reaction steps and 41 chemical species to develop a simplified combustion model for prediction of the knock in dual fue...The present work used a methane-air mixture chemical kinetics scheme consisting of 119 elementary reaction steps and 41 chemical species to develop a simplified combustion model for prediction of the knock in dual fuel engines. Calculated values by the model for natural gas operation showed good agreement with corresponding experimental values over a broad range of operating conditions.展开更多
Numerical simulations of pilot fuel spray and compressing ignition forpre-mixed natural gas ignited by pilot diesel are described. By means of these modeling, the dualfuel and diesel fuel ignition mechanism of some ph...Numerical simulations of pilot fuel spray and compressing ignition forpre-mixed natural gas ignited by pilot diesel are described. By means of these modeling, the dualfuel and diesel fuel ignition mechanism of some phenomena investigated on an optional engine bytechnology of high-speed CCD is analyzed. It is demonstrated that the longer delay of ignition indual fuel engine is not mainly caused by change of the mixture thermodynamics parameters. Theanalysis results illustrate that the ignition of pre-mixed nataral gas ignited by pilot dieseltaking place in dual fuel engine is a process of homogenous charge compression ignition.展开更多
We investigate experimentally and analytically the combustion behavior of a high-metal magnesium-based hydro- reactive fuel under high temperature gaseous atmosphere. The fuel studied in this paper contains 73% magnes...We investigate experimentally and analytically the combustion behavior of a high-metal magnesium-based hydro- reactive fuel under high temperature gaseous atmosphere. The fuel studied in this paper contains 73% magnesium powders. An experimental system is designed and experiments are carried out in both argon and water vapor atmo- spheres. It is found that the burning surface temperature of the fuel is higher in water vapor than that in argon and both of them are higher than the melting point of magnesium, which indicates the molten state of magnesium particles in the burning surface of the fuel. Based on physical considerations and experimental results, a mathematical one-dimensional model is formulated to describe the combustion behavior of the high-metal magnesium-based hydro-reactive fuel. The model enables the evaluation of the burning surface temperature, the burning rate and the flame standoff distance each as a function of chamber pressure and water vapor concentration. The results predicted by the model show that the burning rate and the surface temperature increase when the chamber pressure and the water vapor concentration increase, which are in agreement with the observed experimental trends.展开更多
Natural gas/diesel dual-fuel combustion strategy has a great potential to reduce emissions for marine engines while the high fuel consumption is the major problem.Pre-chamber system is commonly employed as the ignitio...Natural gas/diesel dual-fuel combustion strategy has a great potential to reduce emissions for marine engines while the high fuel consumption is the major problem.Pre-chamber system is commonly employed as the ignition system on large-bore dual-fuel marine engines especially under lean-burn condition,due to its advanced ignition stability and engine efficiency.However,the ignition and combustion mechanism in such dual-fuel pre-chamber engine is still unclear and the effects of in-cylinder swirl flow and mixture stratification on combustion require further investigation specifically.This paper numerically studied the detailed ignition mechanism and combustion process in a marine engine equipped with a pre-chamber ignition system,and revealed the flame development process in main chamber.Moreover,the effects of mixture stratification and swirl ratio on the combustion rate and further engine thermal efficiency are investigated under decoupled condition.The results mainly show that the jet flame develops along the pre-chamber orifice centerline at the initial stage and premixed combustion play an important role,while after that,heat release zone only exist at flame surface,and premixed flame propagation controls the combustion process.In addition,with higher swirl ratio the combustion rate increases significantly due to the wider ignition area.Mixture stratification degree plays a role in accelerating the combustion,either too high or too low stratification degree reduce the combustion rate,while a moderate stratification increases the combustion rate.And appropriate stratification degree by verifying the gas injection parameters can reduce fuel consumption in 0.3%.展开更多
The combustion characteristics and emission behaviors of RP-3 jet fuel were studied and compared to commercial diesel fuel in a single-cylinder compression ignition(CI)engine.Engine operational parameters,including en...The combustion characteristics and emission behaviors of RP-3 jet fuel were studied and compared to commercial diesel fuel in a single-cylinder compression ignition(CI)engine.Engine operational parameters,including engine load(0.6,0.7,and 0.8 MPa indicating the mean effective pressure(IMEP)),the exhaust gas recirculation(EGR)rate(0%,10%,20%,and 30%),and the fuel injection timing(–20,–15,–10,and–5°crank angle(CA)after top dead center(ATDC))were adjusted to evaluate the engine performances of RP-3 jet fuel under changed operation conditions.In comparison to diesel fuel,RP-3 jet fuel shows a retarded heat release and lagged combustion phase,which is more obvious under heavy EGR rate conditions.In addition,the higher premixed combustion fraction of RP-3 jet fuel leads to a higher first-stage heat release peak than diesel fuel under all testing conditions.As a result,RP-3 jet fuel features a longer ignition delay(ID)time,a shorter combustion duration(CD),and an earlier CA50 than diesel fuel.The experimental results manifest that RP-3 jet fuel has a slightly lower indicated thermal efficiency(ITE)compared to diesel fuel,but the ITE difference becomes less noticeable under large EGR rate conditions.Compared with diesel fuel,the nitrogen oxides(NOx)emissions of RP-3 jet fuel are higher while its soot emissions are lower.The NOx emissions of RP-3 can be effectively reduced with the increased EGR rate and delayed injection timing.展开更多
文摘The present work used a methane-air mixture chemical kinetics scheme consisting of 119 elementary reaction steps and 41 chemical species to develop a simplified combustion model for prediction of the knock in dual fuel engines. Calculated values by the model for natural gas operation showed good agreement with corresponding experimental values over a broad range of operating conditions.
基金This project is supported by National Natural Science Foundation of China (No.50076031).
文摘Numerical simulations of pilot fuel spray and compressing ignition forpre-mixed natural gas ignited by pilot diesel are described. By means of these modeling, the dualfuel and diesel fuel ignition mechanism of some phenomena investigated on an optional engine bytechnology of high-speed CCD is analyzed. It is demonstrated that the longer delay of ignition indual fuel engine is not mainly caused by change of the mixture thermodynamics parameters. Theanalysis results illustrate that the ignition of pre-mixed nataral gas ignited by pilot dieseltaking place in dual fuel engine is a process of homogenous charge compression ignition.
基金Project supported by the Young Scientist Fund of the National Natural Science Foundation of China(Grant No.51006118)
文摘We investigate experimentally and analytically the combustion behavior of a high-metal magnesium-based hydro- reactive fuel under high temperature gaseous atmosphere. The fuel studied in this paper contains 73% magnesium powders. An experimental system is designed and experiments are carried out in both argon and water vapor atmo- spheres. It is found that the burning surface temperature of the fuel is higher in water vapor than that in argon and both of them are higher than the melting point of magnesium, which indicates the molten state of magnesium particles in the burning surface of the fuel. Based on physical considerations and experimental results, a mathematical one-dimensional model is formulated to describe the combustion behavior of the high-metal magnesium-based hydro-reactive fuel. The model enables the evaluation of the burning surface temperature, the burning rate and the flame standoff distance each as a function of chamber pressure and water vapor concentration. The results predicted by the model show that the burning rate and the surface temperature increase when the chamber pressure and the water vapor concentration increase, which are in agreement with the observed experimental trends.
基金the financial supports provided by the Low-speed Marine Diesel Project(Project No.CDGC01-KT0308)National Natural Science Foundation of China(Grant No.91941102)。
文摘Natural gas/diesel dual-fuel combustion strategy has a great potential to reduce emissions for marine engines while the high fuel consumption is the major problem.Pre-chamber system is commonly employed as the ignition system on large-bore dual-fuel marine engines especially under lean-burn condition,due to its advanced ignition stability and engine efficiency.However,the ignition and combustion mechanism in such dual-fuel pre-chamber engine is still unclear and the effects of in-cylinder swirl flow and mixture stratification on combustion require further investigation specifically.This paper numerically studied the detailed ignition mechanism and combustion process in a marine engine equipped with a pre-chamber ignition system,and revealed the flame development process in main chamber.Moreover,the effects of mixture stratification and swirl ratio on the combustion rate and further engine thermal efficiency are investigated under decoupled condition.The results mainly show that the jet flame develops along the pre-chamber orifice centerline at the initial stage and premixed combustion play an important role,while after that,heat release zone only exist at flame surface,and premixed flame propagation controls the combustion process.In addition,with higher swirl ratio the combustion rate increases significantly due to the wider ignition area.Mixture stratification degree plays a role in accelerating the combustion,either too high or too low stratification degree reduce the combustion rate,while a moderate stratification increases the combustion rate.And appropriate stratification degree by verifying the gas injection parameters can reduce fuel consumption in 0.3%.
基金supported by the National Natural Science Foundation of China(Grant Nos.52022058,51776124,51861135303)the Ministry of Education of China(Grant No.6141A020335).
文摘The combustion characteristics and emission behaviors of RP-3 jet fuel were studied and compared to commercial diesel fuel in a single-cylinder compression ignition(CI)engine.Engine operational parameters,including engine load(0.6,0.7,and 0.8 MPa indicating the mean effective pressure(IMEP)),the exhaust gas recirculation(EGR)rate(0%,10%,20%,and 30%),and the fuel injection timing(–20,–15,–10,and–5°crank angle(CA)after top dead center(ATDC))were adjusted to evaluate the engine performances of RP-3 jet fuel under changed operation conditions.In comparison to diesel fuel,RP-3 jet fuel shows a retarded heat release and lagged combustion phase,which is more obvious under heavy EGR rate conditions.In addition,the higher premixed combustion fraction of RP-3 jet fuel leads to a higher first-stage heat release peak than diesel fuel under all testing conditions.As a result,RP-3 jet fuel features a longer ignition delay(ID)time,a shorter combustion duration(CD),and an earlier CA50 than diesel fuel.The experimental results manifest that RP-3 jet fuel has a slightly lower indicated thermal efficiency(ITE)compared to diesel fuel,but the ITE difference becomes less noticeable under large EGR rate conditions.Compared with diesel fuel,the nitrogen oxides(NOx)emissions of RP-3 jet fuel are higher while its soot emissions are lower.The NOx emissions of RP-3 can be effectively reduced with the increased EGR rate and delayed injection timing.
