An aqueous BiI_(3)-Zn battery with dual mechanisms of Zn^(2+)(de)intercalation and I^(-)/I_(2)redox

The development of aqueous battery with dual mechanisms is now arousing more and more interest.The dual mechanisms of Zn^(2+)(de)intercalation and I^(-)/I_(2)redox bring unexpected effects.Herein,differing from previous studies using Zn I_(2)additive,this work designs an aqueous Bi I_(3)-Zn battery with selfsupplied I^(-).Ex situ tests reveal the conversion of Bi I_(3)into Bi(discharge)and Bi OI(charge)at the 1st cycle and the dissolved I^(-)in electrolyte.The active I^(-)species enhances the specific capacity and discharge medium voltage of electrode as well as improves the generation of Zn dendrite and by-product.Furthermore,the porous hard carbon is introduced to enhance the electronic/ionic conductivity and adsorb iodine species,proven by experimental and theoretical studies.Accordingly,the well-designed Bi I_(3)-Zn battery delivers a high reversible capacity of 182 m A h g^(-1)at 0.2 A g^(-1),an excellent rate capability with 88 m A h g^(-1)at 10 A g^(-1),and an impressive cyclability with 63%capacity retention over 20 K cycles at 10 A g^(-1).An excellent electrochemical performance is obtained even at a high mass loading of 6 mg cm^(-2).Moreover,a flexible quasi-solid-state Bi I_(3)-Zn battery exhibits satisfactory battery performances.This work provides a new idea for designing high-performance aqueous battery with dual mechanisms.

An integrated quantitative proteomics strategy reveals the dual mechanisms of celastrol against acute inflammation

Inflammation is a defense mechanism associated with a wide range of diseases.Celastrol is a small molecule isolated from traditional Chinese medicine with potent anti-inflammation activity.In this study,we established an integrated quantitative proteomics strategy to investigate the acute response to celastrol treatment in a rat macrophage cell line challenged with lipopolysaccharide(LPS).Both stableisotopic based non-targeted quantitative profiling and PRM-based targeted quantitation methods were employed.Dimethyl-labeling based non-targeted profiling revealed 28 and 52 proteins that significantly up-and down-regulated by celastrol.Bioinformatics analysis pinpoint key signaling pathways affected.Seven proteins were selected for examining their time-dependent regulatory pattern in response to celastrol using targeted PRM quantitation.The abundance of mRNA at multiple time-points of selected proteins was also examined.Celastrol induced an acute response of selected key transcriptional factors in terms of mRNA or protein abundance within one hour.Interestingly,regulatory trend of mRNA and protein abundance suggested a novel dual mechanism of celastrol in the terms of acute antiinflammation.The integrated quantitative proteomic strategy established in this study constitutes an efficient workflow to characterize key components and their time-dependent regulatory pattern for monitoring drug response.

Coupling Characteristics and Control of Dual Mechanical Port Machine with Spoke Type Permanent Magnet Arrangement

Dual mechanical port machine（DMPM）, as a novel electromechanical energy conversion device, has attracted widespread attention. DMPM with spoke type permanent magnet arrangements（STPM-DMPM）, which is one of several types of DMPM, has been of interest recently. The unique coupling characteristics of STPM-DMPM are beneficial to improving system performance, but these same characteristics increase the difficulties of control. Now there has been little research about the control of STPM-DMPM, and this has hindered its practical application. Based on a mathematical model of STPM-DMPM, the coupling characteristics and the merits and demerits of such devices are analyzed as applied to a hybrid system. The control strategies for improving the disadvantages and for utilizing the advantage of coupling are researched. In order to weaken the interaction effect of torque outputs in the inner motor and the outer motor that results from coupling in STPM-DMPM, a decoupling control method based on equivalent current control is proposed, and independent torque control for the inner motor and outer motor is achieved. In order to solve address the problem of adequately utilization of coupling, minimizing the overall copper loss of the inner motor and the outer motor of STPM-DMPM is taken as the optimization objective for optimal control, and the purpose of utilizing the coupling adequately and reasonably is achieved. The verification tests of the proposed decoupling control and optimal control strategies are carried out on a prototype STPM-DMPM, and the experimental results show that the interaction effect of torque outputs in the inner motor and the outer motor can be markedly weakened through use of the control method. The overall copper loss of the inner motor and the outer motor can be markedly reduced through use of the optimal control method, while the power output remains unchanged. A breakthrough in the control problem of STPM-DMPM is accomplished by combining the control methods. Good performance in the control of STPM-DMPM will enhance its practicality, particularly as applied to hybrid systems.

A thermoviscoelastic finite deformation constitutive model based on dual relaxation mechanisms for amorphous shape memory polymers

This paper proposes a new thermoviscoelastic finite deformation model incorporating dual relaxation mechanisms to predict the complete thermo-mechanical response of amorphous shape memory polymers.The model is underpinned by the detailed microscopic molecular mechanism and effectively reflects the current understanding of the glass transition phenomenon.Novel evolution rules are obtained from the model to characterize the viscous flow,and a new theory named an internal stress model is introduced and combined with the dual relaxation mechanisms to capture the stress recovery.The rationality of the constitutive model is verified as the theoretical results agree well with the experimental data.Moreover,the constitutive model is further simplified to facilitate engineering applications,and it can roughly capture the characteristics of shape memory polymers.

New Knowledge-based Genetic Algorithm for Excavator Boom Structural Optimization

Due to the insufficiency of utilizing knowledge to guide the complex optimal searching, existing genetic algorithms fail to effectively solve excavator boom structural optimization problem. To improve the optimization efficiency and quality, a new knowledge-based real-coded genetic algorithm is proposed. A dual evolution mechanism combining knowledge evolution with genetic algorithm is established to extract, handle and utilize the shallow and deep implicit constraint knowledge to guide the optimal searching of genetic algorithm circularly. Based on this dual evolution mechanism, knowledge evolution and population evolution can be connected by knowledge influence operators to improve the conflgurability of knowledge and genetic operators. Then, the new knowledge-based selection operator, crossover operator and mutation operator are proposed to integrate the optimal process knowledge and domain culture to guide the excavator boom structural optimization. Eight kinds of testing algorithms, which include different genetic operators, arc taken as examples to solve the structural optimization of a medium-sized excavator boom. By comparing the results of optimization, it is shown that the algorithm including all the new knowledge-based genetic operators can more remarkably improve the evolutionary rate and searching ability than other testing algorithms, which demonstrates the effectiveness of knowledge for guiding optimal searching. The proposed knowledge-based genetic algorithm by combining multi-level knowledge evolution with numerical optimization provides a new effective method for solving the complex engineering optimization problem.

Robust UV/moisture dual curable PDMS-microcapsule-silica functional material for self-healing,antifouling,and antibacterial applications

Polydimethylsiloxane containing methacryloyloxy and methoxy silane groups(MAPDMS)-microcapsule-SiO_(2)(MPMS)functional materials were prepared by constructing micro-nano hierarchical structures on the surface of MAPDMS matrix.Herein,MAPDMS@1,1-stilbene-modified hydrolyzed polyglycidyl methacrylate/graphene oxide/dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride(MAPDMS@PGMA_(m)/GO/QC18)self-healing microcapsules with compact multi-shell structure were synthesized and combined with nano-SiO_(2)to construct the hierarchical structures.Furthermore,ultraviolet(UV)/moisture dual curing mode was introduced into deep curing reaction and efficient self-healing reaction of the MPMS.The results show that the introduction of UV/moisture dual curing mode and micro-nano hierarchical structure gives MPMS functional materials excellent mechanical properties,antifouling properties,self-healing properties,antibacterial properties.The shear strength and tensile strength of MPMS increase from 3.32 and 4.26 MPa of MAPDMS to 3.81 and 5.06 MPa,respectively.Its static contact angle increases from 115.9°of MAPDMS to 156.5°,its slide angle decreases from 68.5°of MAPDMS to 7.8°,respectively.The antifouling performance of MPMS against seawater,soy sauce,juice,coffee,protein,other contaminants is effectively improved compared with MAPDMS matrix.At the same time,the tensile strength and elongation at break of MPMS after healing reach 98.22%and 96.57%of those in original state,respectively.In addition,the antibacterial rates of MPMS against Escherichia coli and Staphylococcus aureus reach 99.85%and 100%,respectively.The MPMS prepared in this paper is expected to be widely used in marine antifouling,pipeline network,anti-icing,microfluidics,wearable devices,medical devices,electrochemical biosensors,other fields.

Boosted Storage Kinetics in Thick Hierarchical Micro-Nano Carbon Architectures for High Areal Capacity Li-Ion Batteries

A practical and effective approach to increase the energy storage capacity of lithium ion batteries(LIBs)is to boost their areal capacity.Developing thick electrodes is one of the most crucial ways to achieve high areal capacity but limited by sluggish ion/electron transport,poor mechanical stability,and high-cost manufacturing strategies.Here we address these constraints by engineering a unique hierarchical-networked 10 mm thick all-carbon electrode,providing a scalable strategy to produce high areal capacity LIB electrodes.The hierarchical-networked structure utilizes micrometer-sized carbon fibers(MCFs)as building blocks,nano-sized carbon nanotubes(CNTs)as good continuous network with excellent electrical conductivity,and pyrolytic carbon as the binder and active material with excellent storage capacity.The combination of the above features endows our HNT-MCF/CNT/PC electrode with excellent performance including high reversible capacity of 15.44 mAh cm^(-2) at 2.0 mA cm^(-2) and exhibits excellent rate capability of 2.50 mAh cm^(-2) under 10.0 mA cm^(-2) current density.The Li-ion storage mechanism in HNT-MCF/CNT/PC involves dual-storage mechanism including intercalation and surface adsorption(pseudocapacitance)confirmed by the cyclic voltammetry and symmetric cell analysis.This work provides insights into the construction of high mechanical stability thick electrode for the next generation high areal capacity LIBs and beyond.

Wire-feed laser additive manufacturing of dissimilar metals via dual molten pool interface interlocking mechanism

Intermetallic compounds produced in laser additive manufacturing are the main factors restricting the joint performance of dissimilar metals.To solve this problem,a dual molten pool interface interlocking mechanism was proposed in this study.Based on a dual molten pool interface interlocking mechanism,the dissimilar metals,aluminum alloy and stainless steel,were produced as single-layer and multilayer samples,using the wire-feed laser additive manufacturing directed energy deposition technology.The preferred parameters for the dual molten pool interface interlocking mechanism process of the dissimilar metals,aluminum alloy and stainless steel,were obtained.The matching relationship between the interface connection of dissimilar metals and the process parameters was established.The results demonstrated excellent mechanical occlusion at the connection interface and no apparent intermetallic compound layer.Good feature size and high microhardness were observed under a laser power of 660 W,a wire feeding speed of 55 mm/s,and a platform moving speed of 10 mm/s.Molecular dynamics simulations demonstrated a faster rate of aluminum diffusion in the aluminum alloy substrate to stainless steel under the action of the initial contact force than without the initial contact force.Thus,the dual molten pool interface interlocking mechanism can effectively reduce the intermetallic compound layer when dissimilar metals are connected in the aerospace field.

Microstructure and properties in dissimilar/similar weld joints between DP780 and DP980 steels processed by fiber laser welding

The microstructure and mechanical properties（strength, fatigue and formability） of dissimilar/similar weld joints between DP780 and DP980 steels were studied. The microstructure in fusion zone（FZ） was lath martensite（LM）, and alloying elements in the FZ were uniformly distributed. The hardness in the FZ of dissimilar weld joint was similar to the average value（375 HV） of the two similar weld joints. The microstructural evolution in heat affected zone（HAZ） of dissimilar/similar weld joints was as follows：LM（coarse-grained HAZ） →finer LM（fine-grained HAZ） →M-A constituent and ferrite（intercritically HAZ） →tempered martensite（TM） and ferrite（sub-critical HAZ）. Lower hardness in intercritically HAZ and sub-critical HAZ（softening zones） was observed compared to base metal（BM） in dissimilar/similar weld joints. The size of softening zone was 0.2-0.3 mm and reduction in hardness was ~7.6%-12.7% of BM in all the weld joints, which did not influence the tensile properties of weld joints such that fracture location was in BM. Formability of dissimilar weld joints was inferior compared to similar weld joints because of the softening zone, non-uniform microstructure and hardness on the two sides of FZ. The effect of microstructure on fatigue life was not influenced due to the presence of welding concavity.