This paper presents a planar microstrip wideband dual mode Band-Pass Filter(BPF) from 2 GHz to 3.4 GHz with a notched band at 2.62 GHz.The dual mode band-pass filter consists of a ring resonator with two quarter-wavel...This paper presents a planar microstrip wideband dual mode Band-Pass Filter(BPF) from 2 GHz to 3.4 GHz with a notched band at 2.62 GHz.The dual mode band-pass filter consists of a ring resonator with two quarter-wavelength open-circuited stubs at =90o and =0o,respectively.A square perturbation stub has been put at the corner of the ring resonator to increase the narrow stopbands and improve the performance of selectivity.By using a parallel-coupled feed line,a narrow notched band is introduced at the required frequency and its Fractional BandWidth(FBW) is about 5%.The proposed filter has a narrow notched band and a wide pass-band with a sharp cutoff frequency characteristic,the attenuation rate for the sharp cutoff frequency responses is 297.17 dB/GHz(cal-culated from 1.959 GHz with-34.43 dB to 2.065 GHz with-2.93 dB) and 228.10 dB/GHz(calculated from 3.395 GHz with-2.873 dB to 3.507 GHz with-28.42 dB).This filter has the advantages of good insertion loss in both operating bands and two rejections of greater than 16 dB in the range of 1.59 GHz to 1.99 GHz and 3.49 GHz to 3.98 GHz.Having been presented in this article,the measurement results agree well with the simulation results,which validates our idea.展开更多
A novel equilateral triangular patch with a rectangular notch etched to one radiating edge on organic magnetic substrate is proposed for dual frequency operation. Both operations of these dual frequencies arise from t...A novel equilateral triangular patch with a rectangular notch etched to one radiating edge on organic magnetic substrate is proposed for dual frequency operation. Both operations of these dual frequencies arise from the perturbation of TM 10 and TM 11 mode by simply cutting a rectangular notch at the patch bottom. Simulations and experiments have shown the validity of this design. Using an organic magnetic material as the substrate, the antenna exhibits a broader bandwidth of 5.5% and 4.7% at dual-frequencies 1.56 GHz and 2.45 GHz, respectively, as well as a reduced size compared to the dual-frequency patch antennas on non-magnetic material.展开更多
In this paper a design of single layer rectangular notch microstrip antenna for dual-band is proposed and experimentally investigated. This antenna is excited by microstrip line. Direct microstrip coupling with proper...In this paper a design of single layer rectangular notch microstrip antenna for dual-band is proposed and experimentally investigated. This antenna is excited by microstrip line. Direct microstrip coupling with proper matching transformer has been used. Design is made for optimized notch dimension for two resonant frequencies. These resonance frequencies change with the variation in length and width of the notch. The input impedance and VSWR have been measured with the help of Network analyzer. It is found that the input impedance and VSWR depends variation in length and width of the notch microstrip antenna.展开更多
This paper introduces a compact dual notched UWB antenna with an independently controllable WLAN notched band integrated with fixed WiMAX band-notch.The proposed antenna utilizes a slot resonator placed in the main ra...This paper introduces a compact dual notched UWB antenna with an independently controllable WLAN notched band integrated with fixed WiMAX band-notch.The proposed antenna utilizes a slot resonator placed in the main radiator of the antenna for fixed WiMAX band notch,while an inverted L-shaped resonator in the partial ground plane for achieving frequency agility within WLAN notched band.The inverted L-shaped resonator is also loaded with fixed and variable capacitors to control and adjust the WLAN notch.The WLAN notched band can be controlled independently with a wide range of tunability without disturbing the WiMAX bandnotch performance.Step by step design approach of the proposed antenna is discussed and the corresponding mathematical analysis of the proposed resonators are provided in both cases.Simulation of the proposed antenna is performed utilizing commercially available 3D-EM simulator,Ansoft High Frequency Structure Simulator(HFSS).The proposed antenna has high selectivity with experimental validation in terms of reflection coefficient,radiation characteristics,antenna gain,and percentage radiation efficiency.The corresponding measured frequency response of the input port corresponds quite well with the calculations and simulations in both cases.The proposed antenna is advantageous and can adjust according to the device requirements and be one of the attractive candidates for overlay cognitive radio UWB applications and URLLC service in 5G tactile internet.The proposed multifunctional antenna can also be used for wireless vital signs monitoring,sensing applications,and microwave imaging techniques.展开更多
为了避免如WiMax和WLAN等窄带通信系统对超宽带通信系统的影响,该文提出一种具有双陷波特性的超宽带天线。该天线采用圆形贴片作为辐射单元,通过在贴片和接地板上分别开圆弧状的H形槽和L形槽来实现双陷波特性。天线在3.1~10.6 GHz的...为了避免如WiMax和WLAN等窄带通信系统对超宽带通信系统的影响,该文提出一种具有双陷波特性的超宽带天线。该天线采用圆形贴片作为辐射单元,通过在贴片和接地板上分别开圆弧状的H形槽和L形槽来实现双陷波特性。天线在3.1~10.6 GHz的超宽带频段内能够有效地工作并抑制两种不同的窄带通信系统的干扰。同时圆弧状 H 形槽的参数研究表明,这种开槽结构能够以槽参数组合的形式更有效地控制陷波中心频率。实测和仿真结果吻合,该天线实现了良好的陷波功能,在工作频段内有良好的辐射方向特性。展开更多
传统高频脉振电压注入法采用基于带通滤波器与低通滤波器结合的策略,实现位置误差信号提取。但该策略的不足在于无法同时兼顾位置观测闭环的滤波精度与动态性能。为此,提出一种基于双频陷波器(dual frequency notch filter,DFNF)级联低...传统高频脉振电压注入法采用基于带通滤波器与低通滤波器结合的策略,实现位置误差信号提取。但该策略的不足在于无法同时兼顾位置观测闭环的滤波精度与动态性能。为此,提出一种基于双频陷波器(dual frequency notch filter,DFNF)级联低通滤波器的改进型位置误差信号提取策略。该策略通过提高环路增益实现带宽扩展,再利用DFNF加强对二次注入谐波的抑制能力,使位置观测环同时具备高带宽与强滤波特性。首先,对位置观测等效闭环进行建模,并利用闭环传递函数幅频特性分析传统位置误差信号提取策略存在的问题;然后,对改进型位置误差信号提取策略的原理进行介绍,并对比2种位置误差信号提取策略的性能;最后,基于RT-LAB实验平台,对2种位置误差信号提取策略的位置辨识效果进行对比验证。展开更多
基金Supported by the National Natural Science Foundation of China (No. 51007040)
文摘This paper presents a planar microstrip wideband dual mode Band-Pass Filter(BPF) from 2 GHz to 3.4 GHz with a notched band at 2.62 GHz.The dual mode band-pass filter consists of a ring resonator with two quarter-wavelength open-circuited stubs at =90o and =0o,respectively.A square perturbation stub has been put at the corner of the ring resonator to increase the narrow stopbands and improve the performance of selectivity.By using a parallel-coupled feed line,a narrow notched band is introduced at the required frequency and its Fractional BandWidth(FBW) is about 5%.The proposed filter has a narrow notched band and a wide pass-band with a sharp cutoff frequency characteristic,the attenuation rate for the sharp cutoff frequency responses is 297.17 dB/GHz(cal-culated from 1.959 GHz with-34.43 dB to 2.065 GHz with-2.93 dB) and 228.10 dB/GHz(calculated from 3.395 GHz with-2.873 dB to 3.507 GHz with-28.42 dB).This filter has the advantages of good insertion loss in both operating bands and two rejections of greater than 16 dB in the range of 1.59 GHz to 1.99 GHz and 3.49 GHz to 3.98 GHz.Having been presented in this article,the measurement results agree well with the simulation results,which validates our idea.
文摘A novel equilateral triangular patch with a rectangular notch etched to one radiating edge on organic magnetic substrate is proposed for dual frequency operation. Both operations of these dual frequencies arise from the perturbation of TM 10 and TM 11 mode by simply cutting a rectangular notch at the patch bottom. Simulations and experiments have shown the validity of this design. Using an organic magnetic material as the substrate, the antenna exhibits a broader bandwidth of 5.5% and 4.7% at dual-frequencies 1.56 GHz and 2.45 GHz, respectively, as well as a reduced size compared to the dual-frequency patch antennas on non-magnetic material.
文摘In this paper a design of single layer rectangular notch microstrip antenna for dual-band is proposed and experimentally investigated. This antenna is excited by microstrip line. Direct microstrip coupling with proper matching transformer has been used. Design is made for optimized notch dimension for two resonant frequencies. These resonance frequencies change with the variation in length and width of the notch. The input impedance and VSWR have been measured with the help of Network analyzer. It is found that the input impedance and VSWR depends variation in length and width of the notch microstrip antenna.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(No.2019R1A4A1023746,No.2019R1F1A1060799)the Strengthening R&D Capability Program of Sejong University.
文摘This paper introduces a compact dual notched UWB antenna with an independently controllable WLAN notched band integrated with fixed WiMAX band-notch.The proposed antenna utilizes a slot resonator placed in the main radiator of the antenna for fixed WiMAX band notch,while an inverted L-shaped resonator in the partial ground plane for achieving frequency agility within WLAN notched band.The inverted L-shaped resonator is also loaded with fixed and variable capacitors to control and adjust the WLAN notch.The WLAN notched band can be controlled independently with a wide range of tunability without disturbing the WiMAX bandnotch performance.Step by step design approach of the proposed antenna is discussed and the corresponding mathematical analysis of the proposed resonators are provided in both cases.Simulation of the proposed antenna is performed utilizing commercially available 3D-EM simulator,Ansoft High Frequency Structure Simulator(HFSS).The proposed antenna has high selectivity with experimental validation in terms of reflection coefficient,radiation characteristics,antenna gain,and percentage radiation efficiency.The corresponding measured frequency response of the input port corresponds quite well with the calculations and simulations in both cases.The proposed antenna is advantageous and can adjust according to the device requirements and be one of the attractive candidates for overlay cognitive radio UWB applications and URLLC service in 5G tactile internet.The proposed multifunctional antenna can also be used for wireless vital signs monitoring,sensing applications,and microwave imaging techniques.
文摘为了避免如WiMax和WLAN等窄带通信系统对超宽带通信系统的影响,该文提出一种具有双陷波特性的超宽带天线。该天线采用圆形贴片作为辐射单元,通过在贴片和接地板上分别开圆弧状的H形槽和L形槽来实现双陷波特性。天线在3.1~10.6 GHz的超宽带频段内能够有效地工作并抑制两种不同的窄带通信系统的干扰。同时圆弧状 H 形槽的参数研究表明,这种开槽结构能够以槽参数组合的形式更有效地控制陷波中心频率。实测和仿真结果吻合,该天线实现了良好的陷波功能,在工作频段内有良好的辐射方向特性。
文摘传统高频脉振电压注入法采用基于带通滤波器与低通滤波器结合的策略,实现位置误差信号提取。但该策略的不足在于无法同时兼顾位置观测闭环的滤波精度与动态性能。为此,提出一种基于双频陷波器(dual frequency notch filter,DFNF)级联低通滤波器的改进型位置误差信号提取策略。该策略通过提高环路增益实现带宽扩展,再利用DFNF加强对二次注入谐波的抑制能力,使位置观测环同时具备高带宽与强滤波特性。首先,对位置观测等效闭环进行建模,并利用闭环传递函数幅频特性分析传统位置误差信号提取策略存在的问题;然后,对改进型位置误差信号提取策略的原理进行介绍,并对比2种位置误差信号提取策略的性能;最后,基于RT-LAB实验平台,对2种位置误差信号提取策略的位置辨识效果进行对比验证。