Variable spot size optical system for a dual-wavelength laser therapy device

The majority of existing high-power laser therapeutic instruments employ a single wavelength for a single target;thus,they do not meet the requirements for clinical treatment.Therefore,this study designs an optical system for a dual-wavelength high-power laser therapeutic device with a variable spot size.The waist of the short arm of the optical cavity and the G1G2 parameter(G-parameter equivalent cavity method)is calculated using MATLAB software,the spot size and divergence angle on the lens are calculated using an ABCD matrix,and the distance between the treatment spot at different spot sizes and the transformation lens is calculated in order to design the treatment handpiece.Experiments are conducted to analyze the stability at an output power of 532 nm before beam combination and the power loss after beam combination.The results show that the output power stability of the 532-nm beam varies by less than 2%over 150 min,and the loss of both wavelengths is less than 20%,which meets the clinical requirements of the system.The safety performance can meet the requirements of national general standards for medical electrical safety.The proposed dual-wavelength laser therapy instrument has both visible wave and near-infrared wave characteristics;thus,it can accurately target both superficial vessels and vessels with a larger diameter and deeper position.This therapeutic device has the advantages of simple operation,stable and reliable laser output,high security and strong anti-interference ability,and meets the comprehensive clinical treat-ment demands of vascular diseases.

Improvement of carrier distribution in dual wavelength light-emitting diodes

The effect of different barriers between green and blue light regions in dual wavelength light emitting diodes was studied. Compared with a traditional sample, electroluminescence and photoluminescence spectra of the newly designed samples showed peak intensity improvements and smaller blue-shifts with increasing injection current level, and the bottom quantum-wells light emitting is enhanced. All these phenomena can be ascribed to reduced barrier thickness and indium doping in the quantum-barrier influencing electric fields and more holes injecting into the bottom QWs.

Study on Monoxide Emission Spectrometry of Rare Earth Elements Ⅰ. Determination of Sm in Rare Earth Concentrate by Dual Wavelength Method

On the basis of investigated enhancement effect of La, Nd, Eu, and Y on Sm determination with monoxide molecular emission spectrometry, La was selected as enhancement agent and chemical interference inhibitor. In the presence of La, dual wavelength mothod was introduced to eliminate the spectral interference on Sm by other elements. A new method was established to determine samarium in high yttrium rare earth samples with satisfactory results.

Titanium dioxide-based Q-switched dual wavelength in the 1 micron region

In this work a passively Q-switched dual-wavelength ytterbium-doped fiber laser using a titanium dioxide-based saturable absorber is proposed and proven. The system also utilizes a side-polished fiber in a ring cavity configuration to obtain the desired pulse train. A stable dual-wavelength pulse output is obtained at 1034.7and 1039.0 nm, with a maximum pulse energy of 2.0 n J, and a shortest pulse width of 3.2 μs. The generated pulse train is stable, and has a pulse repetition rate from 31.2 to 64.5 kHz.

A Dual Wavelength Differential First Derivative Spectrophotometric Method for Identification and Determination of Carbon Monoxide Generated During the Microsomal Metabolism of Xenobiotics in vitro

本文研究了双波长差示一阶导数分光光度法运用于作为对照品的一氧化碳（ＣＯ）饱和水浓度标定及定性与定量测定微粒体代谢中生成的一氧化碳的方法。本法的优点在于能显著消除试样本底干扰，大大提高了定量准确性及灵敏度。在ＣＯ浓度２～１０μｍｏｌ·Ｌ１范围内与导数光谱峰（４１５ｎｍ）和谷（４２６ｎｍ）之间距离（Ｄ）呈良好线性关系，ｒ＝０．９９９９（ｎ＝５），回归方程Ｃ（ｍｍｏｌ·Ｌ１）＝１７．６Ｄ０．４。最低检测浓度低于０．１μｍｏｌ·Ｌ１ＣＯ。系统回收率和加样回收率（Ｘ±ＲＳＤ）分别为１０２．１±２．９％（ｎ＝７）和７９．７±６．８％（ｎ＝１２）；日内、日间精密度（ＲＳＤ）分别为４．４％（ｎ＝１８）和６．１％（ｎ＝１６）。将本法用于４个三卤苯胺和一个三卤苯的体外代谢测定，结果表明，仅２，４，５三氟苯胺在体外能被大鼠肝微粒体、ＮＡＤＰＨ和分子氧代谢生成一氧化碳。苯巴比妥和地塞米松等肝药酶诱导剂能显著提高一氧化碳的代谢转化速率，它们分别为空白对照组的３或８倍。

A Study of Air/Space-borne Dual-Wavelength Radar for Estimation of Rain Profiles

In this study, a framework is given by which air/space-borne dual-wavelength radar data can be used to estimate the characteristic parameters of hydrometeors. The focus of the study is on the Global Precipitation Measurement （GPM） precipitation radar, a dual-wavelength radar that will operate in the Ku （13.6 GHz） and Ka （35 GHz） bands. A key aspect of the retrievals is the relationship between the differential frequency ratio （DFR） and the median volume diameter, Do, and its dependence on the phase state of the hydrometeors. It is shown that parametric plots of Do and particle concentration in the plane of the DFR and the radar reflectivity factor in the Ku band can be used to reduce the ambiguities in deriving Do from DFR. A self-consistent iterative algorithm, which does not require the use of an independent pathattenuation constraint, is examined by applying it to the apparent radar reflectivity profiles simulated from a drop size distribution （DSD） model. For light to moderate rain, the self-consistent rain profiling approach converges to the correct solution only if the same shape factor of the Gamma distributions is used both to generate and retrieve the rain profiles. On the other hand, if the shape factors differ, the iteration generally converges but not to the correct solution. To further examine the dual-wavelength techniques, the selfconsistent iterative algorithm, along with forward and backward rain profiling algorithms, are applied to measurements taken from the 2nd generation Precipitation Radar （PR-2） built by the Jet Propulsion Laboratory. Consistent with the model results, it is found that the estimated rain profiles are sensitive to the shape factor of the size distribution when the iterative, self-consistent approach is used but relatively insensitive to this parameter when the forward- and backward-constrained approaches are used.

Advantage of dual wavelength light-emitting diodes with dip-shaped quantum wells

Dual-wavelength light-emitting diodes (DW-LEDs) with dip-shaped quantum wells have been studied by numerical simulation.The emission spectra,light output power,carrier concentration in the quantum wells and internal quantum efficiency are investigated.The simulation results indicate that the DW-LEDs with dip-shaped quantum wells perform better than conventional LEDs with rectangular quantum wells in terms of light output power,leakage current and efficiency droop.These improvements in the electrical and optical characteristics are mainly attributed to the alleviation of the electrostatic field in the dip-shaped quantum wells.

Passively Q-switched dual-wavelength Yb：LSO laser based on tungsten disulphide saturable absorber

We demonstrate a passively Q-switched Yb：LSO laser based on tungsten disulphide （WS2） saturable absorber op- erating at 1034 nm and 1056 nm simultaneously. The saturable absorbers were fabricated by spin coating method. With low speed, the WS2 nanoplatelets embedded in polyvinyl alcohol could be coated on a BK7 glass substrate coated with high-refractive-index thin polymer. The shortest pulse width of 1.6 gs with a repetition rate of 76.9 kHz is obtained. As the pump power increases to 9 W, the maximum output power is measured to be 250 mW, corresponding to a single pulse energy of 3.25 μJ. To the best of our knowledge, this is the first time to obtain dual-wavelength Q-switched solid-state laser using few-layer WS2 nanoplatelets.

Dual-wavelength dual-indicator catalytic kinetic spectrophotometry for determination of trace Ru(Ⅲ)

A new dual-wavelength dual-indicator catalytic kinetic spectrophotometric method for the determination of trace Ru(III)was studied.This method was based on Ru(III)-catalyzing oxidation of Arsenazo I and indigo carmine by potassium bromate in sulfuric acid.The absorbances of the catalytic and noncatalytic systems were measured at 510 and610 nm,respectively.Under the optimum conditions,the linear range of determination is 0–0.12 lgáml-1and the detection limit is 1.21 9 10-4lgáml-1.The method was applied for the determination of trace Ru(III)in ore samples with satisfactory results.

An all-solid-state high power quasi-continuous-wave tunable dual-wavelength Ti：sapphire laser system using birefringence filter

This paper describes a tunable dual-wavelength Ti：sapphire laser system with quasi-continuous-wave and high-power outputs. In the design of the laser, it adopts a frequency-doubled Nd：YAG laser as the pumping source, and the birefringence filter as the tuning element. Tunable dual-wavelength outputs with one wavelength range from 700 nm to 756.5 nm, another from 830 nm to 900mn have been demonstrated. With a pump power of 23 W at 532 nm, a repetition rate of 7 kHz and a pulse width of 47.6 ns, an output power of 5.1 W at 744.8 nm and 860.9 nm with a pulse width of 13.2 ns and a line width of 3 nm has been obtained, it indicates an optical-to-optical conversion efficiency of 22.2%.

Dual-wavelength distributed Bragg reflector semiconductor laser based on a composite resonant cavity

We report a monolithic integrated dual-wavelength laser diode based on a distributed Bragg reflector （DBR） composite resonant cavity. The device consists of three sections, a DBR grating section, a passive phase section, and an active gain section. The gain section facet is cleaved to work as a laser cavity mirror. The other laser mirror is the DBR grating, which also functions as a wavelength filter and can control the number of wavelengths involved in the laser action. The reflection bandwidth of the DBR grating is fabricated to have an appropriate value to make the device work at the dual-wavelength lasing state. We adopt the quantum well intermixing （QWI） technique to provide low-absorption loss grating and passive phase section in the fabrication process. By tuning the injection currents on the DBR and the gain sections, the device can generate 0.596 nm-spaced dual-wavelength lasing at room temperature.

Correcting Wavefront Distortion of Dual-Wavelength Beams Due to Atmospheric Turbulence with a Correction Coefficient

In order to improve the correction effect of the adaptive optical system in coherent optical communication, we investigate the relative distortion between the wavefronts of different wavelengths of the beams transmitted on the near-ground horizontal atmospheric turbulent links emitted by coherent optical communication system. And the situation is analyzed when the wavelength corresponding to the wavefront detected by the wavefront detector and the wavelength corrected by the deformed mirror are different, the influence of the wavelength factor on the adaptive optical system correction. We use a series of trigonometric functions and the Hankel transformation to derive the corrected residual variance and the Strehl ratio between the wavefront distortions of the wavelengths of the dual-wavelength combined beam in atmospheric turbulence. In relation to the parameters of the turbulent environment, the ensemble average of the wavefront difference corresponding to different wavelengths the derived is proposed as the coefficient to correct the dual-wavelength adaptive optical system. The results show that the statistic of the turbulence internal scale has a major influence on the difference between the wavefronts. By adding the correction coefficient, the signal light’s wavefront of the coherent optical communication system can be corrected more effectively by the dual-wavelength adaptive optical closure.

Observation of stable bound soliton with dual-wavelength in a passively mode-locked Er-doped fiber laser

A phase-locked bound state soliton with dual-wavelength is observed experimentally in a passively mode-locked Erdoped fiber（EDF） laser with a fiber loop mirror（FLM）. The pulse duration of the soliton is 15 ps and the peak-to-peak separation is 125 ps. The repetition rate of the pulse sequence is 3.47 MHz. The output power is 11.8 mW at the pump power of 128 mW, corresponding to the pulse energy of 1.52 nJ. The FLM with a polarization controller can produce a comb spectrum, which acts as a filter. By adjusting the polarization controller or varying the pump power, the central wavelength of the comb spectrum can be tuned. When it combines with the reflective spectrum of the fiber Bragg grating, the total spectrum of the cavity can be cleaved into two parts, then the bound state soliton with dual-wavelength at 1549.7 nm and 1550.4 nm is obtained.

Dual-wavelength dissipative soliton operation of an erbium-doped fibre laser using a nonlinear polarization rotation technique

We report on the generation of dual-wavelength dissipative solitons in a passively mode-locked fibre laser with a net normal dispersion using the nonlinear polarization rotation （NPR） technique. Taking the intrinsic advantage of the intracavity birefringence-induced spectral filtering effect in the NPR-based ring laser cavity, the dual-wavelength dissipative solitons are obtained. In addition, the wavelength separation and the lasing location of the dual-wavelength solitons can be flexibly tuned by changing the orientation of the polarization controller.

Determination of Cholesterol Content in Waste Fat by Dual-wavelength Spectrophotometry

[Objective]The aim was to find a way to measure the cholesterol content in deserted oil.[Method]Dual-wavelength spectrophotometry method was used for the determination of cholesterol in edible oil.630 nm and 720 nm were set as target band and reference band in this method,respectively.The result was compared to liquid chromatography method.[Result]The relative standard deviation(RSD)was at 1.26% and recovery was between 101.9% and 110.7%.Linear range was 8.0-40.0 μg/ml.The tested result was close to the result of liquid chromatography.[Conclusion]It was proved that this method was easy,fast and accurate.The disturbance of sitosterol was eliminated without isolation.It can be used for fast identification of the authenticity of waste fat.

Output Characteristics of Narrow No-Gain Competition Linewidth Dual-Wavelength Laser at 912 nm and 1064 nm

The output characteristics of a narrow linewidth, no-gain competition, dual-wavelength solid-state laser using an intra-cavity pumped method are reported. This system consists of an intra-cavity pumped Nd:YVO4 laser emitting at 1064 nm, using a 912 nm Nd:GdVO4 laser. A Fabry-Perot etalon is used to compress the linewidth that located at the common cavity of 912 nm and 1064 nm laser. Theoretical analysis and experimental verification were carried out. When the pump power is 32.8 W, the output of 912 nm and 1064 nm theoretical value is 0.036 W and 0.046 W, and the experimental value is 0.017 W and 0.016 W, respectively. The change trend of the theoretical simulated output power value was the same as the actual measured value in the experiment. In addition to this, the experimental measurement shows when the etalon with an angle of 15?, corresponding minimum linewidths were 0.284 nm and 0.627 nm, respectively.

Mid-IR dual-wavelength difference frequency generation in uniform grating PPLN using index dispersion control

A novel widely tunable dual-wavelength mid-IR difference frequency generation （DFG） scheme with uniform grating periodically poled lithium niobate （PPLN） is presented in this paper. By using the temperature-dependent dispersion property of PPLN, the quasi-phase matching （QPM） peak for the pump may evolve into two separate ones and the wavelength spacing between them increases with the decrease of the crystal temperature. Such two pump QPM peaks may allow simultaneous dual-wavelength mid-IR laser radiations while properly setting the two fundamental pump wavelengths. With this scheme, mid-IR dual-wavelength laser radiations at around 3.228 and 3.548, 3.114 and 3.661, and 3.019 and 3.76 μm, are experimentally achieved for the crystal temperatures of 90, 65, and 30 ℃, respectively, based on the fiber laser fundamental lights.

双波长光度法测定热处理橡胶木中支链淀粉和直链淀粉的含量

橡胶木中直链淀粉和支链淀粉的组成比例直接影响淀粉的化学特性,橡胶木热处理过程中,淀粉发生不同程度热降解影响其比例发生变化,分析其含量变化将为热处理橡胶木热解机制研究提供理论基础.研究采用单因素法优化了提取方法参数,并建立了双波长光度法检测橡胶木中直链淀粉和支链淀粉含量的定量分析方法,检验了该分析方法的精密度、稳定性和加标回收率.结果表明,直链淀粉和支链淀粉的标准曲线方程分别为y=0.02499x-0.1136和y=0.00159x-0.0005,其回归系数R^(2)均为0.998,方法前处理样品简便、快速,分析方法稳定性好、灵敏度高,回收率稳定,适用于橡胶木中直链淀粉和支链淀粉含量的定量分析.分析比较了橡胶木素材及不同温度(125、155、185℃)热处理橡胶木中直链淀粉和支链淀粉的含量,橡胶木素材中支链淀粉含量远高于直链淀粉,质量比约为8∶1.随着热处理温度升高至155℃,直链淀粉含量出现明显下降,而温度升高至185℃,支链淀粉含量出现明显下降趋势.

基于光谱合束的双波长输出Nd:YAG固体激光器

报道了一种基于光谱合束的Nd:YAG固体激光器双波长光源。系统由两个固体Nd:YAG脉冲激光器通过光谱合束组合而成,两个固体Nd:YAG脉冲激光器可独立工作,有利于输出脉冲的波长调谐、功率调节和相对延迟调整。通过光栅的色散特性以及输出镜的共同外腔反馈将各个激光器锁定在不同波长,从而实现合束,获得的激光源中心波长锁定在1 061.5 nm和1 064.6 nm,两谱线中心间距为3.1 nm,组合光束的输出能量为173 mJ,组合光束的光束质量因子M2为2.8×2.2;两个Nd:YAG激光器独立工作的输出能量分别为94 mJ和92 mJ,在合束方向上的光束质量因子M2分别为2.7和2.1,在非合束方向上的光束质量因子M2分别为2.2和1.9;组合光束的输出能量为两个Nd:YAG激光器能量总和的93%,组合光束的光束质量因子与单个Nd:YAG激光束的光束质量因子M2基本相同。该双波长激光源满足波长间隔小、输出功率大小相近、同光轴等要求,在太赫兹波产生、测速激光雷达以及医疗仪器等应用领域具有重要作用。

双波长近红外拉曼光谱仪及在腐蚀产物分析中的应用

在拉曼光谱测试中某些物质存在荧光发射背景,由于荧光强度一般比拉曼散射强度高几个数量级,在荧光干扰时几乎无法获得有效的拉曼光谱信号。为抑制荧光背景,可选用近红外波段激光作为激发光源,而硅基探测器在1 000 nm以上波段时光量子效率严重下降,导致近红外拉曼光谱仪器难以探测3 000 cm^(-1)以上的波段,存在荧光抑制效果与检测范围无法兼顾的问题。由于高波数的拉曼特征峰是识别材料种类和解析材料结构的重要依据,如氨基的N—H伸缩振动峰在3 300 cm^(-1)附近、 OH-伸缩振动峰在3 650 cm^(-1),这些基团是分析材料腐蚀产物、水合物、有机物等的重要依据。因此,迫切需要开发一种解决拉曼光谱仪器无法兼顾荧光抑制效果和检测光谱范围问题的方法。该工作提出一种采用光谱仪固定检测波段、 730和830 nm双波长激光“接力”激发的方案(即830 nm激发低波数拉曼、 730 nm激发高波数拉曼)。通过双激光波长“接力”激发、固定检测波段的新设计,可有效拓宽检测范围至200~3 700 cm^(-1),并且不会降低光谱分辨率(达到6 cm^(-1)),与此同时整机光路无机械可动部件,可靠性高便于实现便携式设计。通过样机进行测试,证明该技术方案具备高灵敏度、较好荧光抑制效果、宽检测范围和较高光谱分辨率等优势。通过研制的双波长近红外拉曼光谱仪获得了铀腐蚀产物、有机涂层下的LiH潮解产物的清晰拉曼信号,解决了特种材料无损检测的技术难题。该技术也适用于其他研究及检测领域,特别是拉曼散射截面小、荧光背景高的物质检测。由于双波长近红外拉曼光谱仪可覆盖200~3 700 cm^(-1)检测范围,为多数水合物、含羟基及氨基官能团物质的拉曼检测提供了一种可行的技术途径。