numerical simulation was conducted to study the influence of bleeding. The Euler-Lagrange method was used to investigate the two-phase turbulent combustion flow. Standard k-ε turbulent model was adopted in the contin...numerical simulation was conducted to study the influence of bleeding. The Euler-Lagrange method was used to investigate the two-phase turbulent combustion flow. Standard k-ε turbulent model was adopted in the continuous phase simulation and particle-trajectory model was adopted in the dispersed phase simulation. The results demonstrates: air bleeding can improve the flow field after the strut and the stability of trapped vortex in the cavity; change of bleeding temperature has little effect on the total pressure recovery coefficient and significant effect on combustion efficiency; When fuel-air ratio changes, the combustor performs better in a lean oil state.展开更多
The fundamental performance analysis of an advanced concept ramjet propulsion system using antimatter is presented. Antimatter is generated by ultra-intense laser pulses incident on a gold target. The scientific found...The fundamental performance analysis of an advanced concept ramjet propulsion system using antimatter is presented. Antimatter is generated by ultra-intense laser pulses incident on a gold target. The scientific foundation for the generation of antimatter by an ultra-intense laser was established in the early 1970’s and later demonstrated at Lawrence Livermore National Laboratory from 2008 to 2009. Antimatter on the scale of 2 × 1010 positrons were generated through a ~1 ps pulse from the Lawrence Livermore National Laboratory Titan laser that has an intensity of ~1020 W/cm2. The predominant mechanism is the Bethe-Heitler process, which involves high-energy bremsstrahlung photons as a result of electron-nuclei interaction. Propulsion involving lasers through chemical rather than non-chemical interaction has been previously advocated by Phipps. The major utilities of the ultra-intense laser derived antimatter ramjet are the capability to generate antimatter without a complex storage system and the ability to decouple the antimatter ramjet propulsion system from the energy source. For instance the ultra-intense laser and energy source could be terrestrial, while the ramjet could be mounted to a UAV as a propulsion system. With the extrapolation of current technologies, a sufficient number of pulses by ultra-intense lasers are eventually anticipated for the generation of antimatter to heat the propulsive flow of a ramjet. Fundamental performance analysis is provided based on an ideal ramjet derivation that is modified to address the proposed antimatter ramjet architecture.展开更多
Water ramjets using outer water as an oxidizer have been demonstrated as a potential propulsion mode for underwater High Speed Supercavitating Vehicles (HSSVs) because of their higher energy density, power density, an...Water ramjets using outer water as an oxidizer have been demonstrated as a potential propulsion mode for underwater High Speed Supercavitating Vehicles (HSSVs) because of their higher energy density, power density, and specific impulse, but water flux changes the shapes of supercavity. To uncover the cavitator drag characteristics and the supercavity shape of HSSVs with water inflow for ramjets, supercavitation flows around a disk cavitator with inlet hole are studied using the homogenous model. By changing the water inflow in the range of 0-10 L/s through cavitators having different water inlet areas, a series of numerical simulations of supercavitation flows was performed. The water inflow flux of ramjets significantly influences the drag features of disk cavitators and the supercavity shape, but it has little influence on the slender ratio of supercavitaty. Furthermore, as the water inlet area increases, the drag coefficient of the cavitators' front face decreases, but this increase does not influence the diameter of the supercavity's maximum cross section and the drag coefficient of the entire cavitator significantly. In addition, with increasing waterflux of the ramjet, both the drag coefficient of cavitators and the maximum diameter of supercavities decrease stably. This research will be helpful for layout optimization and supercavitaty scheme design of HSSVs with water inflow for ramjets.展开更多
为探索脉冲爆轰水冲压发动机水下工作时导水器内燃气射流发展特性,利用可燃气体的爆轰在水下受限空间内产生脉动气泡,对爆轰管在圆筒形受限空间内的水下爆轰燃气射流进行了数值仿真与实验验证。基于雷诺时均基本方程组与k-ε两方程模型...为探索脉冲爆轰水冲压发动机水下工作时导水器内燃气射流发展特性,利用可燃气体的爆轰在水下受限空间内产生脉动气泡,对爆轰管在圆筒形受限空间内的水下爆轰燃气射流进行了数值仿真与实验验证。基于雷诺时均基本方程组与k-ε两方程模型耦合流体体积气液界面追踪方法的相输运方程建立受限空间中水下单次燃气射流流场流动模型,使用OpenFOAM中的Compressible Inter Foam求解器对受限空间中脉冲爆轰燃气射流进行数值求解。结果表明:受限空间对水下爆轰的前导激波的影响较小,前导激波幅值与自由空间相比变化不大,由爆轰燃气射流所引起的压力扰动大幅升高且持续时间明显增加,受限空间中各处压力显著高于受限空间之外;受限空间中燃气泡的脉动周期延长至60 ms左右,然而受限空间径向尺寸对燃气泡的脉动周期影响较小。可见,受限空间可提高水下爆轰管出口近场压力并延长燃气射流作用时间,研究结果对脉冲爆轰水冲压发动机推力性能提升方法研究具有重要指导作用。展开更多
文摘numerical simulation was conducted to study the influence of bleeding. The Euler-Lagrange method was used to investigate the two-phase turbulent combustion flow. Standard k-ε turbulent model was adopted in the continuous phase simulation and particle-trajectory model was adopted in the dispersed phase simulation. The results demonstrates: air bleeding can improve the flow field after the strut and the stability of trapped vortex in the cavity; change of bleeding temperature has little effect on the total pressure recovery coefficient and significant effect on combustion efficiency; When fuel-air ratio changes, the combustor performs better in a lean oil state.
文摘The fundamental performance analysis of an advanced concept ramjet propulsion system using antimatter is presented. Antimatter is generated by ultra-intense laser pulses incident on a gold target. The scientific foundation for the generation of antimatter by an ultra-intense laser was established in the early 1970’s and later demonstrated at Lawrence Livermore National Laboratory from 2008 to 2009. Antimatter on the scale of 2 × 1010 positrons were generated through a ~1 ps pulse from the Lawrence Livermore National Laboratory Titan laser that has an intensity of ~1020 W/cm2. The predominant mechanism is the Bethe-Heitler process, which involves high-energy bremsstrahlung photons as a result of electron-nuclei interaction. Propulsion involving lasers through chemical rather than non-chemical interaction has been previously advocated by Phipps. The major utilities of the ultra-intense laser derived antimatter ramjet are the capability to generate antimatter without a complex storage system and the ability to decouple the antimatter ramjet propulsion system from the energy source. For instance the ultra-intense laser and energy source could be terrestrial, while the ramjet could be mounted to a UAV as a propulsion system. With the extrapolation of current technologies, a sufficient number of pulses by ultra-intense lasers are eventually anticipated for the generation of antimatter to heat the propulsive flow of a ramjet. Fundamental performance analysis is provided based on an ideal ramjet derivation that is modified to address the proposed antimatter ramjet architecture.
基金Supported by the National Natural Science Foundation of China under Grant Nos. 51579209, 51409215 and 51679202
文摘Water ramjets using outer water as an oxidizer have been demonstrated as a potential propulsion mode for underwater High Speed Supercavitating Vehicles (HSSVs) because of their higher energy density, power density, and specific impulse, but water flux changes the shapes of supercavity. To uncover the cavitator drag characteristics and the supercavity shape of HSSVs with water inflow for ramjets, supercavitation flows around a disk cavitator with inlet hole are studied using the homogenous model. By changing the water inflow in the range of 0-10 L/s through cavitators having different water inlet areas, a series of numerical simulations of supercavitation flows was performed. The water inflow flux of ramjets significantly influences the drag features of disk cavitators and the supercavity shape, but it has little influence on the slender ratio of supercavitaty. Furthermore, as the water inlet area increases, the drag coefficient of the cavitators' front face decreases, but this increase does not influence the diameter of the supercavity's maximum cross section and the drag coefficient of the entire cavitator significantly. In addition, with increasing waterflux of the ramjet, both the drag coefficient of cavitators and the maximum diameter of supercavities decrease stably. This research will be helpful for layout optimization and supercavitaty scheme design of HSSVs with water inflow for ramjets.
文摘为探索脉冲爆轰水冲压发动机水下工作时导水器内燃气射流发展特性,利用可燃气体的爆轰在水下受限空间内产生脉动气泡,对爆轰管在圆筒形受限空间内的水下爆轰燃气射流进行了数值仿真与实验验证。基于雷诺时均基本方程组与k-ε两方程模型耦合流体体积气液界面追踪方法的相输运方程建立受限空间中水下单次燃气射流流场流动模型,使用OpenFOAM中的Compressible Inter Foam求解器对受限空间中脉冲爆轰燃气射流进行数值求解。结果表明:受限空间对水下爆轰的前导激波的影响较小,前导激波幅值与自由空间相比变化不大,由爆轰燃气射流所引起的压力扰动大幅升高且持续时间明显增加,受限空间中各处压力显著高于受限空间之外;受限空间中燃气泡的脉动周期延长至60 ms左右,然而受限空间径向尺寸对燃气泡的脉动周期影响较小。可见,受限空间可提高水下爆轰管出口近场压力并延长燃气射流作用时间,研究结果对脉冲爆轰水冲压发动机推力性能提升方法研究具有重要指导作用。
