Instrumented oscillographic study on impact toughness of an axle steel DZ2 with different tempering temperatures

Compared with the conventional Charpy impact test method,the oscillographic impact test can help in the behavioral analysis of materials during the fracture process.In this study,the trade-off relationship between the strength and toughness of a DZ2 axle steel at various tempering temperatures and the cause of the improvement in impact toughness was evaluated.The tempering process dramatically influenced carbide precipitation behavior,which resulted in different aspect ratios of carbides.Impact toughness improved along with the rise in tempering temperature mainly due to the increase in energy required in impact crack propagation.The characteristics of the impact crack propagation process were studied through a comprehensive analysis of stress distribution,oscilloscopic impact statistics,fracture morphology,and carbide morphology.The poor impact toughness of low-tempering-temperature specimens was attributed to the increased number of stress concentration points caused by carbide morphology in the small plastic zone during the propagation process,which resulted in a mixed distribution of brittle and ductile fractures on the fracture surface.

Effect of Seasonal Variations on the Behavior of Flexible Pavements in Burkina Faso: Towards Alternating and Periodic Loading of Multi-Axle Heavy Goods Vehicles for Road Durability

Bituminous materials are heat-sensitive, and their mechanical properties vary with temperature. This variation in properties is not without consequences on the performance of flexible road structures under the repeated passage of multi-axles. This study determines the influence of seasonal variations on the rate of permanent deformation, the rut depth of flexible pavements and the effect of alternating loading of heavy goods vehicles following the temperature variations on the durability of roads. Thus, an ambient and pavement surface temperature measurement was carried out in 2022. The temperature profile at different layers of the modelled pavement, the evaluation of deformation rates and rutting depth were determined using several models. The results show that the permanent deformation and rutting rates are higher at the level of the bituminous concrete layer than at the level of the asphalt gravel layer because the stresses decrease from the surface to the depth of the pavement. On the other hand, the variations in these rates, permanent deformations and ruts between the hot and so-called cold periods are more pronounced in the bitumen gravel than in bituminous concrete, showing that gravel bitumen is more sensitive to temperature variations than bituminous concrete despite its higher rigidity. Of these results, we suggested a periodic and alternating loading of the different types of heavy goods vehicles. These loads consist of fully applying the WAEMU standards with a tolerance of 15% during periods of high and low temperatures. This regulation has increased 2 to 3 times in the durability of roadways depending on the type of heavy goods vehicle.

可溶性Axl受体酪氨酸激酶在老年急性失代偿性心力衰竭患者短期预后中的价值

目的 探讨急性失代偿性心力衰竭(ADHF)患者血清可溶性Axl受体酪氨酸激酶(sAxlTK)水平在评估短期预后中的临床价值。方法 选择2018年1月1日至2021年10月1日亳州市人民医院收治的老年ADHF患者238例,根据随访90 d内复合事件发生情况分为预后不良组45例和预后良好组193例。又根据血清sAxlTK最佳截断值分为高水平组80例和低水平组158例。检测血清sAxlTK、肌钙蛋白I(cTnI)和N末端B型钠尿肽前体(NT-proBNP)水平。结果 预后不良组血清sAxlTK水平明显高于预后良好组[43.89(33.95,51.44)μg/L vs 23.89(18.73,33.92)μg/L,P<0.01]。多因素logistic回归分析显示,血清cTnI和sAxlTK是ADHF患者短期预后不良的独立危险因素(OR=1.922,95%CI:1.035~3.568,P=0.039;OR=1.021,95%CI:1.008~1.034,P=0.001)。ROC曲线分析显示,血清sAxlTK、cTnI和NT-proBNP联合预测短期预后不良的曲线下面积为0.836(95%CI:0.778~0.895)。高水平组90 d内复合事件发生率明显高于低水平组(45.0%vs 5.7%,P<0.05)。Kaplan-Meier曲线分析显示,高水平组复合事件累积发生率较低水平组更高(χ^(2)=66.991,P_(log rank)<0.01)。高水平组总生存率较低水平组更低,生存预后更差(χ^(2)=16.899,P_(log rank)<0.01)。结论 老年ADHF患者入院时高血清sAxlTK水平与短期预后不良高风险有关。血清sAxlTK有希望成为短期预后不良早期预测的有用工具,且其与cTnI、NT-proBNP联合使用可进一步提高预后预测准确性。

受体酪氨酸激酶AXL在肿瘤生物学中的作用研究进展

AXL是一种受体酪氨酸激酶(receptor tyrosine kinase,RTK),属于TAM(TYRO3-AXL-MER)家族。在生理条件下,AXL表达于人体的心脏、骨骼肌、甲状腺中。AXL通过调控多条信号通路介导了肿瘤细胞的血管生成、迁移、侵袭、增殖与转移等过程。此外,AXL在多种癌症中高表达,对于肿瘤患者的预后评价具有重要意义,并极有可能成为一种新的诊断及预后生物标志物和治疗靶点。本文就近年来AXL在肿瘤生物学中的作用研究进展进行综述。

Research on fatigue evaluation method of high-speed train axle based on axle box acceleration

As a key safety component of the high-speed train, fatigue fracture of the axle would lead to major accidents such as derailment or overturning. The complexity of the axle dynamic stress test seriously enhances the difficulty of axle fatigue damage analysis. In this paper, the dynamic stress test of the high-speed train axle was carried out,the axle box acceleration was monitored on-track during the test, and the relationship between the axle stress spectrum and acceleration was analyzed on-track. The results show that the relationships between the axle equivalent stresses and the Root Mean Square(RMS) values of the axle box vertical acceleration and lateral acceleration exhibit a strong joint probability density distribution. The concept of the virtual surface density of wheel-rail contact is also proposed to realize the purpose of using axle box acceleration to deduce axle equivalent force. The results quantify the relationship between axle box acceleration and axle equivalent force, provide a new method for predicting the axle damage using the acceleration RMS values, and open up a new approach for structural health monitoring of high-speed train axles.

血清Occludin、Axl水平与急性缺血性脑卒中溶栓后出血转化的关系

目的探讨血清闭合蛋白(Occludin)、Axl水平与急性缺血性脑卒中(AIS)溶栓治疗后出血转化(HT)的关系。方法选取2019年1月至2022年1月该院AIS患者126例为研究对象,根据是否发生HT分为HT组(43例)和非HT组(83例)。比较两组一般资料及血清Occludin、Axl水平,采用多因素Logistic回归分析AIS患者发生HT的影响因素,采用受试者工作特征(ROC)曲线分析血清Occludin、Axl对AIS患者发生HT的预测价值,并分析血清Occludin、Axl预测HT发生的交互作用。结果两组心房颤动、入院时美国国立卫生研究院卒中量表(NIHSS)评分及血清Occludin、Axl水平比较,差异有统计学意义(P<0.05);多因素Logistic回归分析显示,心房颤动、入院时NIHSS评分高、血清Occludin高水平、Axl低水平均为AIS患者发生HT的独立危险因素(P<0.05);ROC曲线结果显示,血清Occludin、Axl预测AIS患者溶栓治疗后HT风险均有较高价值,二者联合预测的曲线下面积(AUC)、灵敏度、特异度分别为0.742、70.73%、66.93%。Occludin和Axl对HT发生存在负向交互作用。结论AIS患者血清Occludin、Axl均异常表达,可作为HT的预测指标,且二者对HT发生存在负向交互作用。

Impact of Multi-Axle Vehicles and Road Overloads on the Durability of Asphalt Pavements

The multiplication of heavy vehicle axles and road overloads are phenomena that are becoming increasingly important on the road network of the WAEMU community. These phenomena, although framed by standards, have an impact on the durability of pavements. In this manuscript it is a question of evaluating the life of the road under the effect of traffic of these multi-axle vehicles and the different tolerances of overloads observed on the road network. To achieve this, a modeling of a bituminous pavement was made with the software ALIZE Lcpc Version 231 based on the principle of the French method of sizing. An inventory of multi-axle heavy goods vehicles was also made on a road with a weighing station. This traffic counting made it possible to classify heavy goods vehicles into three categories, namely: 1) trucks, 2) dual-wheeled semi-trailers and 3) single-wheeled semi-trailers. The results obtained show that in terms of aggressiveness, single-wheeled semi-trailers are the most aggressive, followed by heavy goods vehicles in the category of trucks with more than five axles and semi-trailers with dual wheels with more than seven axles. The durability of the road depends on the aggressiveness of heavy goods vehicles, it was found that the tolerance threshold for overloads of 15% of the total permissible rolling weight (TARW) or the total permissible laden weight (TALW) currently granted in the Community area needs to be reviewed. For durable road surfaces, this tolerance may only be allowed for heavy goods vehicles of type P11, P12 and P13. The 5% tolerance can be applied to all vehicles except heavy goods vehicles with single wheels.

Simulation Research on Stress Intensity Factors of Different Crack Aspect Ratios on Hollow Axles

Because of the wicked service environment of the high speed train, it is possible that the hollow axle of the train may encounter the foreign object damage and form a sharp notch. Under the fatigue loading a crack can initiate from the notch and propagate to failure. It is noted that the stress intensity factor is the control parameter of the crack propagating, for the purpose of getting the more exact propagation characteristics, the stress intensity factor is studied mainly. The service loads of hollow axles are defined, and the stress distribution of hollow axles is obtained according to the load spectrum. The semi-ellipse crack configuration is defined with three parameters： the aspect ratio, the relative depth and the relative location along the crack front. Quarter point 20-node isoparametric degenerate singular elements are used for the region near the crack tip. The finite element model of crack extension of hollow axle is created, and the crack front is dispersed which can realize orthogonal extension. Based on this the stress intensity factors of crack front were calculated, and the distribution rules of the stress intensity factors of different initial crack shapes are obtained. The conclusions are compared with that of the analytic method and they agree with each other very well, and the calculating results show that there is a close relationship between the stress intensity factor and the initial crack shape. For a round crack the stress intensity factor at the surface point increases faster than the one at the center point with the crock propagation. However, for a narrow crack, the results are in contrast with that of a round one. So, all the cracks with different shapes propagate toward to a similar shape, and they grow at this shape to end. The study may contribute to the crack propagate characteristics research.

Analysis of Quenching Stresses in 35CrMo Axle

By using the finite element method （FEM）, we comprehensively analyzed the fields of temperature, organization, and stress in 35CrMo train axles during the quenching process is conducted, and experimentally studied the formation and evolution of inner stresses in axles during the quenching process. The results show that in the quenching process, stresses on the axle surface change from tensile to compressive gradually, while stresses in the axle core change from compressive to tensile gradually. Heat stresses and the amount of martensitic transformation are all increased with the increase of cooling rate. As a result, the maximmn instantaneous stresses in the axle are increased greatly when the cooling rate is increased with brine quenching. Large instantaneous tensile stress in the axle core with brine quenching is very likely to cause quench cracking and should be avoided.

Analysis and Optimization on Factors Affecting Forming Quality of Half Axle Gears Warm Precision Forging

Half axle gears is produced by precision forging popularly because of the advantages in minimum machining allowances, lower material consumption and good service properties. But the forming quality of precision forging is difficult to control. Many simulations and analysis of precision forging process were taken by previous researchers. But no concrete method is proposed to evaluate and optimize the forming quality of half axel gears. The primary purpose of this work is improving the forming quality of half axel gears by analyzing and optimizing the affected factors of forming quality. The enclosed-die warm forging process of half axle gears was developed, and a new type of die-set used on double action hydraulic press was brought forward. The main influential factors of precision forming quality were analyzed after the forming process had been simulated by using finite element method（FEM）. These factors include die structure, web thickness and web position. A method used to evaluate the forming quality was established, which investigated the maximal forming load, the metal filling rate and the material damage factor. The FEM simulations of half axle gears precision forging were evaluated by this method. The results show that the best forming quality can be achieved when the punches were added with bosses, the web located at the middle plant of the gear, and the web thickness was 30 percent of the inner hole diameter. Verification experiments taking the above optimized parameters were performed on a 7.8 MN double action hydraulic press. The trial products were formed well. And their geometric precision meets the demand. The verification result shows that the optimization of the influential factors, according to the simulations and the evaluation method, can improve the forming quality. The new structure of precision forging die-set and the new evaluation method guarantee a high forming quality ofhalfaxel gears.

凝血因子Ⅷ、血小板反应蛋白1及可溶性Axl受体酪氨酸激酶在慢性肾小球肾炎患者中的表达情况及诊断价值

目的分析慢性肾小球肾炎(CGN)患者血浆凝血因子Ⅷ(FⅧ)、血小板反应蛋白1(TSP-1)及可溶性Axl受体酪氨酸激酶(sAxl)水平,并探讨三者对CGN的诊断价值。方法选取63例CGN患者作为研究组,55例健康体检者作为对照组。比较两组研究对象的一般临床资料,以及血浆FⅧ活性、TSP-1水平、sAxl水平。分析CGN患者血浆FⅧ活性、TSP-1水平和sAxl水平与肾功能的相关性。采用受试者工作特征曲线分析FⅧ、TSP-1及sAxl对CGN的诊断价值。结果与对照组相比,研究组患者的24 h尿蛋白水平、血尿素氮水平、血肌酐水平、血尿酸水平、血浆FⅧ活性、血浆TSP-1水平、sAxl水平均升高,肾小球滤过率(GFR)降低(均P<0.05)。CGN患者血浆FⅧ活性及TSP-1、sAxl水平与血尿素氮水平、血肌酐水平、血尿酸水平均呈正相关,与GFR均呈负相关(均P<0.05)。血浆FⅧ活性、TSP-1水平、sAxl水平单独检测及联合检测诊断CGN的灵敏度分别为87.30%、77.78%、85.71%、84.13%,特异度分别为56.36%、50.91%、58.18%、61.82%,曲线下面积分别为0.724、0.719、0.702、0.793。结论CGN患者血浆FⅧ活性及TSP-1、sAxl水平明显升高,且与肾功能具有一定相关性,三者联合检测对CGN具有较高的诊断价值。

Experimental and numerical study on fretting wear and fatigue of full-scale railway axles

This study investigated the fretting wear and fatigue of full-scale railway axles.Fatigue tests were conducted on full-scale railway axles,and the fretting wear and fretting fatigue in the fretted zone of the railway axles were analysed.Three-dimensional finite element models were established based on the experimental results.Then,multi-axial fatigue parameters and a linear elastic fracture mechanics-based approach were used to investigate the fretting fatigue crack initiation and propagation,respectively,in which the role of the fretting wear was taken into account.The experimental and simulated results showed that the fretted zone could be divided into zones I-III according to the surface damage morphologies.Fretting wear alleviated the stress concentration near the wheel seat edge and resulted in a new stress concentration near the worn/unworn boundary in zone II,which greatly promoted the fretting crack initiation at the inner side of the fretted zone.Meanwhile,the stress concentration also increased the equivalent stress intensity factor range DKeq below the mating surface,and thus promoted the propagation of fretting fatigue crack.Based on these findings,the effect of the stress redistribution resulting from fretting wear is suggested to be taken into account when evaluating the fretting fatigue in railway axles.

DAMAGE TOLERANCE ANALYSIS ON HOLLOW AXLES OF HIGH SPEED MOTOR TRAINS

According to the rules of UIC515-3, the service loads of the axles are defined, which include some different loads cases as follows： the static loads; the impact loads resulted from running through the rail joints and unevenness rails; the loads through curves and from braking. Through the calculating and analysis, the stress distribution of the hollow axles is obtained for 200 km/h high speed motor trains used in China. At the same time, the fatigue crack growth of hollow axles is studied, and the initial surface cracks of 2 mm depth caused by hard objects strike or the other causes are discussed. On the basis of the linear elastic fracture mechanics theory, the stress intensity factor of the crack of the geometry transition outside the wheel seat is also studied. Associated with fatigue crack propagation equation and the corresponding crack propagation threshold, the crack propagation characteristics under different shapes are calculated. Then the running distances are educed with different shapes propagating to the critical length, and the estimation of the residual lives about hollow axles which are the reference values of examine and repair limit of the hollow axle is given.

Seismic and Geological Model of Jura Sedimentation from the South-West Part of Tarskii Axle Part

Seismic attributes have proliferated in the last three decades at a rapid rate and have helped interpreters in making accurate predictions in hydrocarbon exploration and development.Attributes sensitive to amplitude, such as impedance inversion and AVO,are widely used for lithological and petrophysical prediction of reservoir properties.Other attributes,such as coherence and curvature,are particularly useful

Dynamic Characteristics Analysis on Truck Drive Axle Assembly

A kind of single impulse welding drive axle used in a truck was selected as research object.The dynamic characteristic simulation of the drive axle was analyzed through building the vehicle dynamics simulation model in virtual software.Comparison between different speeds and different roads were made to get the corresponding dynamics of drive axle.

肝癌标志物受体酪氨酸激酶AXL、软骨寡聚基质蛋白和骨桥蛋白多重检测试剂开发与验证

目的:基于流式荧光技术开发血清中肝癌标志物受体酪氨酸激酶AXL、软骨寡聚基质蛋白(COMP)和骨桥蛋白(OPN)的多重检测试剂。方法:建立检测血清甲胎蛋白(AFP)、AXL、COMP和OPN的流式荧光免疫法,并进行检测性能分析,筛选两个队列的肝癌血清样本进行临床验证并初步探讨四项标志物对肝癌的诊断价值。结果:AFP、AXL、COMP和OPN的检测范围依次为0.046~100.000、0.014~30.000、0.007~15.000、0.023~50.000 ng/mL,最低检测限依次为0.010、0.014、0.004、0.007 ng/mL,批内精密度<8%,批间精密度<5%,回收率为84%~101%,线性度为95%~102%。AXL、COMP和OPN之间没有观察到交叉反应。流式荧光免疫法与临床化学发光免疫法具有显著相关性(r=0.995,P<0.001)。肝癌血清AFP、AXL、COMP和OPN水平均高于健康对照,差异有统计学意义(P<0.01)。针对所有血清样本(n=100),绘制肝癌与健康对照的受试者工作特征(ROC)曲线,血清OPN的曲线下面积(AUC)为0.913,在单项标志物中,OPN对肝癌的诊断效果最佳;AFP、AXL和OPN组合的AUC为0.937,AFP、AXL、COMP和OPN组合的AUC为0.940。结论:本研究建立了四项肝癌血清标志物联合检测方法。AXL、COMP和OPN是诊断肝癌的潜在血清标志物,AXL、OPN与AFP联合检测的肝癌预测模型展示出较好的检测性能。结果对进一步开发其他标志物的多重检测试剂具有重要的参考价值。

DEVELOPMENT OF MATERIAL USED FOR AVIATION APPARATUS AXLE JOURNALS

ＤＥＶＥＬＯＰＭＥＮＴＯＦＭＡＴＥＲＩＡＬＵＳＥＤＦＯＲＡＶＩＡＴＩＯＮＡＰＰＡＲＡＴＵＳＡＸＬＥＪＯＵＲＮＡＬＳ①ＷｕＥｎｘｉ，ＬｉＳｈｅｎ，ＱｉａｎＣｈｏｎｇｌｉａｎｇａｎｄＺｏｕＺｈｉｑｉａｎｇＳｔａｔｅＫｅｙＬａｂｏｒａｔｏｒｙｆｏｒＰｏｗｄ...

FLEXIBLE 2-DOF STEERING MODEL OF MULTI-AXLE HEAVY-DUTY VEHICLE

A flexible two degrees of freedom (2-DOF) steering model of multi-axlevehicle (MAV) is presented with considering the effect of frame flexibility based on the classic2-DOF model. A method to calculate the frame flexibility is derived by using three moments equation.The steering stability of MAV is analyzed. The steering performance of MAV is also researched infrequency domain. Simulation results show that the dynamic effects of flexible model are more severethan rigid model and the flexible effect of frame will weaken the steering stability of MAV.Different disposals of steering axles lead to different steering characteristics of MAV. Thein-phase steering mode improves the steering characteristics and stability at high speed. Theanti-phase steering mode increases the steering mobility at low vehicle speed.

RNA结合蛋白PTBP 1与磷酸化-AXL共表达在骨肉瘤中的临床意义

【目的】探索RNA结合蛋白PTBP1与p-AXL在骨肉瘤中的表达情况及其临床病理联系,并进一步探讨PTBP1/p-AXL共表达在骨肉瘤中的预后评估意义。【方法】应用GEO和Target数据库分析PTBP1与AXL在骨肉瘤和正常组织中的表达差异及PTBP1的预后价值。收集2016年3月至2020年10月中山大学第一附属医院76例骨肉瘤和37例非恶性骨组织(骨痂、骨纤维结构不良或骨样骨瘤)及其病例信息,应用免疫组化法检测PTBP1和p-AXL蛋白的表达情况并行统计学分析。【结果】GEO数据库分析结果显示PTBP1和AXL在骨肉瘤组织的表达具有高于正常组织的趋势,但尚未达到统计学意义;Target数据分析结果显示PTBP1高表达组骨肉瘤患者总生存期(OS)与无进展生存期(PFS)均短于低表达组,但差异尚未达统计学意义(P=0.064;P=0.134)。免疫组化结果显示PTBP1和p-AXL蛋白的表达在骨肉瘤组织中显著高于非恶性骨组织;p-AXL阳性表达率与肺转移相关(P=0.025);Kaplan-Meier分析发现肺转移、复发、PTBP1表达及PTBP1/p-AXL共表达等因素与骨肉瘤患者不良总生存期相关;且多变量Cox回归分析显示肺转移(P<0.0001)、PTBP1表达阳性(P=0.041)是骨肉瘤患者总生存期(OS)独立危险因素;PTBP1/p-AXL共表达患者的OS(P=0.017)和PFS(P=0.043)均低于非PTBP1/p-AXL共表达患者。【结论】PTBP1、p-AXL在骨肉瘤中高表达,PTBP1与p-AXL共表达与患者预后差相关,且PTBP1可作为骨肉瘤患者独立预后指标。

NEW TECHNOLOGY AND MACHINE TOOL FOR THE FORMING OF THE REAR AXLE SHAFT OF LIGHT TRUCK

A new technology of forward extrusion and cross rolling has been developed to process the rear axle shaft sleeve of light truck with the use of tube billets. This technology is characterized by large reductions of material, energy and cost of production and has significant economical benefits. This technology is stable and reliable. The three rolls transverse rolling mill built based on this technology has novelty construction, higher production efficiency, non-vibration and noise. The research results have been extensively applied to light trucks and farm transport with load of 1 to 3 tones.