One stone two birds:electrochemical and colorimetric dual-mode biosensor based on copper peroxide/covalent organic framework nanocomposite for ultrasensentive norovirus detection

Norovirus(NoV)is regarded as one of the most common causes of foodborne diarrhea in the world.It is urgent to identify the pathogenic microorganism of the diarrhea in short time.In this work,we developed an electrochemical and colorimetric dual-mode detection for NoV based on the excellent dual catalytic properties of copper peroxide/COF-NH_(2)nanocomposite(CuO_(2)@COF-NH_(2)).For the colorimetric detection,NoV can be directly detected by the naked eye based on CuO_(2)@COF-NH_(2)as a laccase-like nonazyme using“peptide-NoV-antibody”recognition mode.The colorimetric assay displayed a wide and quality linear detection range from 1 copy/mL to 5000 copies/mL of NoV with a low limit of detection(LOD)of 0.125 copy/mL.For the electrochemical detection of NoV,CuO_(2)@COF-NH_(2)showed an oxidation peak of copper ion from Cu^(+)to Cu^(2+)using“peptide-NoV-antibody”recognition mode.The electrochemical assay showed a linear detection range was 1-5000 copies/mL with a LOD of 0.152 copy/mL.It's worthy to note that this assay does not need other electrical signal molecule,which provide the stable and sensitive electrochemial detection for NoV.The electrochemical and colorimetric dual-mode detection was used to detect NoV in foods and faceal samples,which has the potential for improving food safety and diagnosing of NoV-infected diarrhea.

Comparison of the clinical effects of dual-modality endoscopy and traditional laparotomy for the treatment of intra-and extrahepatic bile duct stones

BACKGROUND Bile duct stones(BDSs)may cause patients to develop liver cirrhosis or even liver cancer.Currently,the success rate of surgical treatment for intrahepatic and extrahepatic BDSs is not satisfactory,and there is a risk of postoperative complic-ations.AIM To compare the clinical effects of dual-modality endoscopy(duodenoscopy and laparoscopy)with those of traditional laparotomy in the treatment of intra-and extrahepatic BDSs.METHODS Ninety-five patients with intra-and extrahepatic BDSs who sought medical services at Wuhan No.1 Hospital between August 2019 and May 2023 were selected;45 patients in the control group were treated by traditional laparotomy,and 50 patients in the research group were treated by dual-modality endoscopy.The following factors were collected for analysis:curative effects,safety(incision infection,biliary fistula,lung infection,hemobilia),surgical factors[surgery time,intraoperative blood loss(IBL)volume,gastrointestinal function recovery time,and length of hospital stay],serum inflammatory markers[tumor necrosis factor(TNF)-α,interleukin(IL)-6,and IL-8],and oxidative stress[glutathione peroxidase(GSH-Px),superoxide dismutase(SOD),malondialdehyde(MDA),and advanced protein oxidation products(AOPPs)].RESULTS The analysis revealed markedly better efficacy(an obviously higher total effective rate)in the research group than in the control group.In addition,an evidently lower postoperative complication rate,shorter surgical duration,gastrointestinal function recovery time and hospital stay,and lower IBL volume were observed in the research group.Furthermore,the posttreatment serum inflammatory marker(TNF-α,IL-6,and IL-8)levels were significantly lower in the research group than in the control group.Compared with those in the control group,the posttreatment GSH-Px,SOD,MDA and AOPPs in the research group were equivalent to the pretreatment levels;for example,the GSH-Px and SOD levels were significantly higher,while the MDA and AOPP levels were lower.CONCLUSION Dual-modality endoscopy therapy(duodenoscopy and laparoscopy)is more effective than traditional laparotomy in the treatment of intra-and extrahepatic BDSs and has a lower risk of postoperative complications;significantly shortened surgical time;shorter gastrointestinal function recovery time;shorter hospital stay;and lower intraop-erative bleeding volume,while having a significant inhibitory effect on excessive serum inflammation and causing little postoperative oxidative stress.

Force and impulse multi-sensor based on flexible gate dielectric field effect transistor

Nowadays,force sensors play an important role in industrial production,electronic information,medical health,and many other fields.Two-dimensional material-based filed effect transistor(2D-FET)sensors are competitive with nano-level size,lower power consumption,and accurate response.However,few of them has the capability of impulse detection which is a path function,expressing the cumulative effect of the force on the particle over a period of time.Herein we fabricated the flexible polymethyl methacrylate(PMMA)gate dielectric MoS_(2)-FET for force and impulse sensor application.We systematically investigated the responses of the sensor to constant force and varying forces,and achieved the conversion factors of the drain current signals(I_(ds))to the detected impulse(I).The applied force was detected and recorded by I_(ds)with a low power consumption of~30 nW.The sensitivity of the device can reach~8000%and the 4×1 sensor array is able to detect and locate the normal force applied on it.Moreover,there was almost no performance loss for the device as left in the air for two months.

Bioinspired Passive Tactile Sensors Enabled by Reversible Polarization of Conjugated Polymers

Tactile perception plays a vital role for the human body and is also highly desired for smart prosthesis and advanced robots.Compared to active sensing devices,passive piezoelectric and triboelectric tactile sensors consume less power,but lack the capability to resolve static stimuli.Here,we address this issue by utilizing the unique polarization chemistry of conjugated polymers for the first time and propose a new type of bioinspired,passive,and bio-friendly tactile sensors for resolving both static and dynamic stimuli.Specifically,to emulate the polarization process of natural sensory cells,conjugated polymers(including poly(3,4-ethylenedioxythiophen e):poly(styrenesulfonate),polyaniline,or polypyrrole)are controllably polarized into two opposite states to create artificial potential differences.The controllable and reversible polarization process of the conjugated polymers is fully in situ characterized.Then,a micro-structured ionic electrolyte is employed to imitate the natural ion channels and to encode external touch stimulations into the variation in potential difference outputs.Compared with the currently existing tactile sensing devices,the developed tactile sensors feature distinct characteristics including fully organic composition,high sensitivity(up to 773 mV N^(−1)),ultralow power consumption(nW),as well as superior bio-friendliness.As demonstrations,both single point tactile perception(surface texture perception and material property perception)and two-dimensional tactile recognitions(shape or profile perception)with high accuracy are successfully realized using self-defined machine learning algorithms.This tactile sensing concept innovation based on the polarization chemistry of conjugated polymers opens up a new path to create robotic tactile sensors and prosthetic electronic skins.

A crosstalk-free dual-mode sweat sensing system for naked-eye sweat loss quantification via changes in structural reflectance

Sweat loss monitoring is important for understanding the body’s thermoregulation and hydration status,as well as for comprehensive sweat analysis.Despite recent advances,developing a low-cost,scalable,and universal method for the fabrication of colorimetric microfluidics designed for sweat loss monitoring remains challenging.In this study,we propose a novel laserengraved surface roughening strategy for various flexible substrates.This process permits the construction of microchannels that show distinct structural reflectance changes before and after sweat filling.By leveraging these unique optical properties,we have developed a fully laser-engraved microfluidic device for the quantification of naked-eye sweat loss.This sweat loss sensor is capable of a volume resolution of 0.5µL and a total volume capacity of 11µL,and can be customized to meet different performance requirements.Moreover,we report the development of a crosstalk-free dual-mode sweat microfluidic system that integrates an Ag/AgCl chloride sensor and a matching wireless measurement flexible printed circuit board.This integrated system enables the real-time monitoring of colorimetric sweat loss signals and potential ion concentration signals without crosstalk.Finally,we demonstrate the potential practical use of this microfluidic sweat loss sensor and its integrated system for sports medicine via on-body studies.

A single dual-mode gas sensor for early safety warning of Li-ion batteries:Micro-scale Li dendrite and electrolyte leakage

Li dendrites and electrolyte leakage are common causes of Li-ion battery failure.H_(2),generated by Li dendrites,and electrolyte vapors have been regarded as gas markers of the early safety warning of Li-ion batteries.SnO_(2)-based gas sensors,widely used for a variety of applications,are promising for the early safety detection of Li-ion batteries,which are necessary and urgently required for the development of Li-ion battery systems.However,the traditional SnO_(2)sensor,with a single signal,cannot demonstrate intelligent multi-gas recognition.Here,a single dual-mode(direct and alternating current modes)SnO_(2)sensor demonstrates clear discrimination of electrolyte vapors and H_(2),released in different states of Li-ion batteries,together with principal component analysis(PCA)analysis.This work provides insight into the intelligent technology of single gas sensors.

Axial Micro-Strain Sensor Based on FM-FBG via Dual-Mode ML-FMF in Sensor Networks

An in-fiber axial micro-strain sensor based on a Few Mode Fiber Bragg Grating (FM-FBG) is proposed and experimentally characterized. This FM-FBG is in inscribed in a multi-layer few-mode fiber (ML-FMF), and could acquire the change of the axial strain along fibers, which depends on the transmission dips. On account of the distinct dual-mode property, a good stability of this sensor is realized. The two transmission dips could have the different sensing behaviors. Both the propagation characteristics and operation principle of such a sensor are demonstrated in detail. High sensitivity of the FM-FBG, ~4 pm/με and ~4.5 pm/με within the range of 0 με - 1456 με, is experimentally achieved. FM-FBGs could be easily scattered along one fiber. So this sensor may have a great potential of being used in sensor networks.

Collaborative positioning for swarms:A brief survey of vision,LiDAR and wireless sensors based methods

As positioning sensors,edge computation power,and communication technologies continue to develop,a moving agent can now sense its surroundings and communicate with other agents.By receiving spatial information from both its environment and other agents,an agent can use various methods and sensor types to localize itself.With its high flexibility and robustness,collaborative positioning has become a widely used method in both military and civilian applications.This paper introduces the basic fundamental concepts and applications of collaborative positioning,and reviews recent progress in the field based on camera,LiDAR(Light Detection and Ranging),wireless sensor,and their integration.The paper compares the current methods with respect to their sensor type,summarizes their main paradigms,and analyzes their evaluation experiments.Finally,the paper discusses the main challenges and open issues that require further research.

A Dual-Mode Bow Tie Optical Fiber Sensor for Measurement of Axial Strain

An optical fiber strain sensor utilizing the mode-mode interference of LP01x, and LPJ11x modes in bow tie optical fibers is described. The heterodyne interference caused by frequency modulation of laser diode (LD) with ramp injection current is used to realize the detection of linear phase. Experimental results show a resolution of about 2% of one fringe corresponding to a strain of 2.9m.

Intelligent Recognition Using Ultralight Multifunctional Nano‑Layered Carbon Aerogel Sensors with Human‑Like Tactile Perception

Humans can perceive our complex world through multi-sensory fusion.Under limited visual conditions,people can sense a variety of tactile signals to identify objects accurately and rapidly.However,replicating this unique capability in robots remains a significant challenge.Here,we present a new form of ultralight multifunctional tactile nano-layered carbon aerogel sensor that provides pressure,temperature,material recognition and 3D location capabilities,which is combined with multimodal supervised learning algorithms for object recognition.The sensor exhibits human-like pressure(0.04–100 kPa)and temperature(21.5–66.2℃)detection,millisecond response times(11 ms),a pressure sensitivity of 92.22 kPa^(−1)and triboelectric durability of over 6000 cycles.The devised algorithm has universality and can accommodate a range of application scenarios.The tactile system can identify common foods in a kitchen scene with 94.63%accuracy and explore the topographic and geomorphic features of a Mars scene with 100%accuracy.This sensing approach empowers robots with versatile tactile perception to advance future society toward heightened sensing,recognition and intelligence.

IN VIVO VALIDATION OF DUAL-MODALITY SYSTEM FOR SIMULTANEOUS POSITRON EMISSION TOMOGRAPHY AND OPTICAL TOMOGRAPHIC IMAGING

We report on tests of combined positron emission tomography(PET)andfluorescence molecular tomography(FMT)imaging system for in vivo investigation on small animals.A nude mouse was inoculated with MD-MB-231 breast cancer cells which expressed redfluorescent protein(RFP).For FMT system,reflective illumination mode was adopted with full-angle data acquisition.[18F]-Fluorodeoxyglucose([18F]-FDG)was used as radioactive tracer for PET.Both data were acquired simultaneously and then reconstructed separately before fusion.Fluorescent tomography results showed exactly where the tumor was located while PET results offered more metabolic information.Results confirmed feasibility for tumor detection and showed superiority to single modality imaging.

High-speed all-optic optical coherence tomography and photoacoustic microscopy dual-modal system for microcirculation evaluation

We propose a high-speed all-optic dual-modal system that integrates spectral domain optical coherence tomography and photoacoustic microscopy(PAM).A 3*3 coupler-based interfer-ometer is used to remotely detect the surface vibration caused by photoacoustic(PA)waves.Three outputs of the interferometer are acquired simultaneously with a multi-channel data ac-quisition card.One channel data with the highest PA signal detection sensitivity is selected for sensitivity compensation.Experiment on the phantom demonstrates that the proposed method can sucessfully compensate for the loss of intensity caused by sensitivity variation.The imaging speed of the PAM is improved compared to our previous system.The total time to image a sample with 256×256 pixels is~20s.Using the proposed system,the microvasculature in the mouse auricle is visualized and the blood flow state is accessed.

Mesoporous MnSiO3@Fe3O4@C Nanoparticle as p H-responsive T1-T2* Dual-modal Magnetic Resonance Imaging Contrast Agent for Tumor Diagnosis

Mesoporous structured MnSiO3@Fe3O4@C nanoparticles(NPs)were prepared via a facile and efficient strategy,with negligible cytotoxicity and minor side efforts.The as-prepared MnSiO3@Fe3O4@C NPs hold great potential in serving as pH-responsive T1-T2^*dual-modal magnetic resonance(MR)imaging contrast agents.The released Mn^2+shortened T1 relaxation time,meanwhile the superparamagnetic Fe3O4 enhanced T2 contrast imaging.The release rate of Mn ions reaches 31.66%under the condition of pH=5.0,which is similar to tumor microenvironment and organelles.Cytotoxicity assays show that MnSiO3@Fe3O4@C NPs have minor toxicity,even at high concentrations.After intravenous injection of MnSiO3@Fe3O4@C NPs,a rapid contrast enhancement in tumors was achieved with a significant enhancement of 132%after 24 h of the administration.Moreover,a significant decreasement of 53.8%was witnessed in T2 MR imaging signal.It demonstrated that MnSiO3@Fe3O4@C NPs can act as both positive and negative MR imaging contrast agents.Besides,owing to the pH-responsive degradation of mesoporous MnSiO3,MnSiO3@Fe3O4@C NPs can also be used as potential drug systems for cancer theranostics.

Rao Algorithms-Based Structure Optimization for Heterogeneous Wireless Sensor Networks

The structural optimization of wireless sensor networks is a critical issue because it impacts energy consumption and hence the network’s lifetime.Many studies have been conducted for homogeneous networks,but few have been performed for heterogeneouswireless sensor networks.This paper utilizes Rao algorithms to optimize the structure of heterogeneous wireless sensor networks according to node locations and their initial energies.The proposed algorithms lack algorithm-specific parameters and metaphorical connotations.The proposed algorithms examine the search space based on the relations of the population with the best,worst,and randomly assigned solutions.The proposed algorithms can be evaluated using any routing protocol,however,we have chosen the well-known routing protocols in the literature:Low Energy Adaptive Clustering Hierarchy(LEACH),Power-Efficient Gathering in Sensor Information Systems(PEAGSIS),Partitioned-based Energy-efficient LEACH(PE-LEACH),and the Power-Efficient Gathering in Sensor Information Systems Neural Network(PEAGSIS-NN)recent routing protocol.We compare our optimized method with the Jaya,the Particle Swarm Optimization-based Energy Efficient Clustering(PSO-EEC)protocol,and the hybrid Harmony Search Algorithm and PSO(HSA-PSO)algorithms.The efficiencies of our proposed algorithms are evaluated by conducting experiments in terms of the network lifetime(first dead node,half dead nodes,and last dead node),energy consumption,packets to cluster head,and packets to the base station.The experimental results were compared with those obtained using the Jaya optimization algorithm.The proposed algorithms exhibited the best performance.The proposed approach successfully prolongs the network lifetime by 71% for the PEAGSIS protocol,51% for the LEACH protocol,10% for the PE-LEACH protocol,and 73% for the PEGSIS-NN protocol;Moreover,it enhances other criteria such as energy conservation,fitness convergence,packets to cluster head,and packets to the base station.

Electrochemical biosensors for point-of-care testing

Point-of-care testing(POCT)is the practice of diagnosing and monitoring diseases where the patient is located,as opposed to traditional treatment conducted solely in a medical laboratory or other clinical setting.POCT has been less common in the recent past due to a lack of portable medical devices capable of facilitating effective medical testing.However,recent growth has occurred in this field due to advances in diagnostic technologies,device miniaturization,and progress in wearable electronics.Among these developments,electrochemical sensors have attracted interest in the POCT field due to their high sensitivity,compact size,and affordability.They are used in various applications,from disease diagnosis to health status monitoring.In this paper we explore recent advancements in electrochemical sensors,the methods of fabricating them,and the various types of sensing mechanisms that can be used.Furthermore,we delve into methods for immobilizing specific biorecognition elements,including enzymes,antibodies,and aptamers,onto electrode surfaces and how these sensors are used in real-world POCT settings.

MXene-Based Elastomer Mimetic StretchableSensors: Design, Properties, and Applications

Flexible sensors based on MXene-polymer composites are highly prospective for next-generation wearable electronics used in human-machine interfaces.One of the motivating factors behind the progress of flexible sensors is the steady arrival of new conductive materials.MXenes,a new family of 2D nanomaterials,have been draw-ing attention since the last decade due to their high electronic conduc-tivity,processability,mechanical robustness and chemical tunability.In this review,we encompass the fabrication of MXene-based polymeric nanocomposites,their structure-property relationship,and applications in the flexible sensor domain.Moreover,our discussion is not only lim-ited to sensor design,their mechanism,and various modes of sensing platform,but also their future perspective and market throughout the world.With our article,we intend to fortify the bond between flexible matrices and MXenes thus promoting the swift advancement of flexible MXene-sensors for wearable technologies.

UAV-assisted data collection for wireless sensor networks with dynamic working modes

Wireless Sensor Network(WSN)is a cornerstone of Internet of Things(IoT)and has rich application scenarios.In this work,we consider a heterogeneous WSN whose sensor nodes have a diversity in their Residual Energy(RE).In this work,to protect the sensor nodes with low RE,we investigate dynamic working modes for sensor nodes which are determined by their RE and an introduced energy threshold.Besides,we employ an Unmanned Aerial Vehicle(UAV)to collect the stored data from the heterogeneous WSN.We aim to jointly optimize the cluster head selection,energy threshold and sensor nodes’working mode to minimize the weighted sum of energy con-sumption from the WSN and UAV,subject to the data collection rate constraint.To this end,we propose an efficient search method to search for an optimal energy threshold,and develop a penalty-based successive convex approximation algorithm to select the cluster heads.Then we present a low-complexity iterative approach to solve the joint optimization problem and discuss the implementation procedure.Numerical results justify that our proposed approach is able to reduce the energy consumption of the sensor nodes with low RE significantly and also saves energy for the whole WSN.

Fe3O4-based Nanoparticles for pH-responsive Dual-modality Imaging and Photothermal Therapy

The study designed a polyacrylic acid(PAA)modified Fe3O4@MnO2 nanoparticles(Fe3O4@MnO2@PAA)for T1/T2 dualmode imaging.In addition,this nano-drug has pH response and anti-tumor photothermal therapy.First,using Fe3O4 as the core can significantly reduce the signal of Fe3O4@MnO2@PAA nanoparticles.MnO2 nanoshells can be decomposed into paramagnetic Mn2+under the acidic environment in the tumor,which enhanced the T1 signal.The pH-responsive T1/T2 dual-mode magnetic resonance imaging(MRI)contrast agent had good sensitivity and specificity,providing more comprehensive and detailed information for tumor diagnosis.In addition,Fe3O4@MnO2@PAA nanoparticles showed excellent absorption capacity in the near-infrared region(NIR),which could be used as a good photothermal conversion material to mediate photothermal treatment of tumors.Therefore,the pHresponsive dual-mode MRI nanoparticle-mediated photothermal therapy showed good application potential in tumor treatment and diagnosis.

A utility and easily fabricated dual-mode fiber film for efficient and comfortable thermal management

Nowadays, the global climate is constantly being destroyed and the fluctuations in ambient temperature are becoming more frequent. However, conventional single-mode thermal management strategies(heating or cooling) failed to resolve such dynamic temperature changes. Moreover, developing thermal management devices capable of accommodating these temperature variations while remaining simple to fabricate and durable has remained a formidable obstacle. To address these bottlenecks, we design and successfully fabricate a novel dual-mode hierarchical(DMH) composite film featuring a micronanofiber network structure, achieved through a straightforward two-step continuous electrospinning process. In cooling mode, it presents a high solar reflectivity of up to 97.7% and an excellent atmospheric transparent window(ATW) infrared emissivity of up to 98.9%. Noted that this DMH film could realize a cooling of 8.1 ℃ compared to the ambient temperature outdoors. In heating mode, it also exhibits a high solar absorptivity of 94.7% and heats up to 11.9 ℃ higher than black cotton fabric when utilized by individuals. In practical application scenarios, a seamless transition between efficient cooling and heating is achieved by simply flipping the film. More importantly, the DMH film combining the benefits of composites demonstrates portability, durability, and easy-cleaning, promising to achieve large-scale production and use of thermally managed textiles in the future. The energy savings offered by film applications provide a viable solution for the early realization of carbon neutrality.

Progress of Proximity Sensors for Potential Applications in Electronic Skins

Recently,electronic skins and fl exible wearable devices have been developed for widespread applications in medical monitoring,artifi cial intelligence,human–machine interaction,and artifi cial prosthetics.Flexible proximity sensors can accurately perceive external objects without contact,introducing a new way to achieve an ultrasensitive perception of objects.This article reviews the progress of fl exible capacitive proximity sensors,fl exible triboelectric proximity sensors,and fl exible gate-enhanced proximity sensors,focusing on their applications in the electronic skin fi eld.Herein,their working mechanism,materials,preparation methods,and research progress are discussed in detail.Finally,we summarize the future challenges in developing fl exible proximity sensors.