The high-efficiency Shock Vectoring Control Serpentine Nozzle(SVCSN)takes into account both thrust vectoring and infrared stealth,and significantly improves the comprehensive performance of the aero-engines through an...The high-efficiency Shock Vectoring Control Serpentine Nozzle(SVCSN)takes into account both thrust vectoring and infrared stealth,and significantly improves the comprehensive performance of the aero-engines through an additional auxiliary duct.In this paper,the schlieren photographs at the exit of the high-efficiency SVCSN and the wall static pressure distributions were obtained by experiments,and the numerical results were used to enrich the thrust vectoring characteristics.The effects of the auxiliary injection were analyzed first to reveal the advantages of the high-efficiency SVCSN compared to the conventional SVCSN.Then,the aerodynamic parameters and the structural parameters of the high-efficiency SVCSN were investigated,including the Nozzle Pressure Ratio(NPR),the Secondary flow Pressure Ratio(SPR),the secondary flow relative area and the secondary flow injection angle.Finally,the coupling performance of the high-efficiency SVCSN is studied by using the approximate modeling technology.Results show that the auxiliary injection increases the range between the two shock legs of the‘‘k”shock wave induced by the secondary flow,then causes the separation zone and high-pressure boss of the down wall to expand upstream,and finally results in a prominent increase in the thrust vectoring performance.The thrust vectoring angle and Vectoring Efficiency(VE)of the high-efficiency SVCSN are about 61.6%and 75.7%,respectively,higher than those of the conventional SVCSN at NPR=6.The effects of the NPR and the SPR on the thrust vectoring performance of the high-efficiency SVCSN are coupled with each other.A larger NPR matched with a smaller SPR shows better thrust vectoring performance.The maximum fluctuations in thrust vectoring angle and VE caused by the NPR and SPR are about 22%and 64%.The VE decreases monotonously with the increase of the secondary flow relative area.Smaller secondary flow injection angle shows better thrust vector performance,and the thrust vectoring angle and VE of the secondary flow injection angle of 90are about 20%higher than those of the secondary flow injection angle of 110at NPR=6.Therefore,the secondary flow relative area of 0.06 and the secondary flow injection angle of 90are recommended.展开更多
The Bypass Dual Throat Nozzle(BDTN)is a novel fluidic Thrust Vectoring(TV)nozzle,it switches to TV state by opening the valve in the bypass.To greatly manipulate the BDTN,the dynamic characteristics in the TV starting...The Bypass Dual Throat Nozzle(BDTN)is a novel fluidic Thrust Vectoring(TV)nozzle,it switches to TV state by opening the valve in the bypass.To greatly manipulate the BDTN,the dynamic characteristics in the TV starting process should be analyzed.This paper conducts numerical simulations to grasp the variation processes of performances and the flow field evolution of BDTN and Dual Throat Nozzle(DTN).The dynamic responses of TV starting in typical DTN models are investigated at first.Then,the TV starting processes of BDTN in different Nozzle Pressure Ratio(NPR)conditions are simulated,and the valve opening durations(T)are also considered.Before the expected TV direction is achieved in the DTN,the jet is deflected to the opposite direction at the beginning of the dynamic process,which is called the reverse TV phenomenon.However,this phenomenon disappears in the BDTN.The larger injection width of DTN intensifies unsteady oscillations,and the reverse TV phenomenon is strengthened.In the BDTN,T determines the delay degree of performance variations compared to the static results,which is called hysteresis effect.At NPR=10,the hysteresis affects the final stable performance of BDTN.This study analyses the dynamic characteristics in DTN and BDTN,laying a foundation for further design of nozzles and control strategies.展开更多
Dual throat nozzle (DTN) is fast becoming a popular technique for thrust vectoring. The DTN is designed with two throats, an upstream minimum and a downstream minimum at the nozzle exit, with a cavity in between the u...Dual throat nozzle (DTN) is fast becoming a popular technique for thrust vectoring. The DTN is designed with two throats, an upstream minimum and a downstream minimum at the nozzle exit, with a cavity in between the upstream throat and exit. In the present study, a computational work has been carried out to analyze the performance of a dual throat nozzle at various mass flow rates of secondary flow and nozzle pressure ratios (NPR). Two-dimensional, steady, compressible Navier-Stokes equations were solved using a fully implicit finite volume scheme. The present computational results were validated with available experimental data. Based on the present results, the control effectiveness of thrust-vectoring is discussed in terms of the thrust coefficient and the coefficient of discharge.展开更多
Aiming at the deficiencies of notch filters on the aspect of vibration suppression for elastic missile with swing nozzle thrust vector control(SNTVC),an active vibration controller(AVC)is proposed.It is composed of an...Aiming at the deficiencies of notch filters on the aspect of vibration suppression for elastic missile with swing nozzle thrust vector control(SNTVC),an active vibration controller(AVC)is proposed.It is composed of an optimal state feedback controller(OSFC)and an optimal minimal order state observer(OMOSO),which can be respectively designed based on the separation principle.The design rules of these two elements are successively given.Computer simulation results present that AVC can realize strong vibration suppression and good convergence property after disturbing.Moreover,it has simple design and then it is easily implemented in engineering.In addition,the AVC scheme can also resolve the poor system stability to a great extent,which is resulted from the bad static stability of missile body.展开更多
基金supported by the Science Center for Gas Turbine Project,China(Nos.P2022-B-Ⅱ-010-001 and P2022-B-I-002-001)the National Natural Science Foundation of China(Nos.52376032 and 52076180)+2 种基金the Funds for Distinguished Young Scholars of Shaanxi Province,China(No.2021JC-10)the National Science and Technology Major Project,China(No.J2019-Ⅱ-0015-0036)the Fundamental Research Funds for the Central Universities,China(No.501XTCX2023146001).
文摘The high-efficiency Shock Vectoring Control Serpentine Nozzle(SVCSN)takes into account both thrust vectoring and infrared stealth,and significantly improves the comprehensive performance of the aero-engines through an additional auxiliary duct.In this paper,the schlieren photographs at the exit of the high-efficiency SVCSN and the wall static pressure distributions were obtained by experiments,and the numerical results were used to enrich the thrust vectoring characteristics.The effects of the auxiliary injection were analyzed first to reveal the advantages of the high-efficiency SVCSN compared to the conventional SVCSN.Then,the aerodynamic parameters and the structural parameters of the high-efficiency SVCSN were investigated,including the Nozzle Pressure Ratio(NPR),the Secondary flow Pressure Ratio(SPR),the secondary flow relative area and the secondary flow injection angle.Finally,the coupling performance of the high-efficiency SVCSN is studied by using the approximate modeling technology.Results show that the auxiliary injection increases the range between the two shock legs of the‘‘k”shock wave induced by the secondary flow,then causes the separation zone and high-pressure boss of the down wall to expand upstream,and finally results in a prominent increase in the thrust vectoring performance.The thrust vectoring angle and Vectoring Efficiency(VE)of the high-efficiency SVCSN are about 61.6%and 75.7%,respectively,higher than those of the conventional SVCSN at NPR=6.The effects of the NPR and the SPR on the thrust vectoring performance of the high-efficiency SVCSN are coupled with each other.A larger NPR matched with a smaller SPR shows better thrust vectoring performance.The maximum fluctuations in thrust vectoring angle and VE caused by the NPR and SPR are about 22%and 64%.The VE decreases monotonously with the increase of the secondary flow relative area.Smaller secondary flow injection angle shows better thrust vector performance,and the thrust vectoring angle and VE of the secondary flow injection angle of 90are about 20%higher than those of the secondary flow injection angle of 110at NPR=6.Therefore,the secondary flow relative area of 0.06 and the secondary flow injection angle of 90are recommended.
基金the continued support of Key Laboratory of Inlet and Exhaust system Technology (Nanjing University of Aeronautics and Astronautics), ChinaMinistry of Education, National Science and Technology Major Project of China (Nos. 2017-V-0004-0054, 2019-II-0007-0027, Y2022II-0005-0008)+6 种基金Defense Industrial Technology Development Program of China (No. JCKY2019605D001)Advanced Jet Propulsion Creativity Center of AEAC of China (No. HKCX2020-02-011)China Postdoctoral Science Foundation (No. 2022M721598)Jiangsu Funding Program for Excellent Postdoctoral Talent of China (No. 2022ZB214)the Youth Fund Project of Natural Science Foundation of Jiangsu Province of China (No. BK20230891)the National Natural Science Foundation of China (No. 12332018)Science Center for Gas Turbine Project, China (P2022-B-I-006-001) and some other related foundations
文摘The Bypass Dual Throat Nozzle(BDTN)is a novel fluidic Thrust Vectoring(TV)nozzle,it switches to TV state by opening the valve in the bypass.To greatly manipulate the BDTN,the dynamic characteristics in the TV starting process should be analyzed.This paper conducts numerical simulations to grasp the variation processes of performances and the flow field evolution of BDTN and Dual Throat Nozzle(DTN).The dynamic responses of TV starting in typical DTN models are investigated at first.Then,the TV starting processes of BDTN in different Nozzle Pressure Ratio(NPR)conditions are simulated,and the valve opening durations(T)are also considered.Before the expected TV direction is achieved in the DTN,the jet is deflected to the opposite direction at the beginning of the dynamic process,which is called the reverse TV phenomenon.However,this phenomenon disappears in the BDTN.The larger injection width of DTN intensifies unsteady oscillations,and the reverse TV phenomenon is strengthened.In the BDTN,T determines the delay degree of performance variations compared to the static results,which is called hysteresis effect.At NPR=10,the hysteresis affects the final stable performance of BDTN.This study analyses the dynamic characteristics in DTN and BDTN,laying a foundation for further design of nozzles and control strategies.
文摘Dual throat nozzle (DTN) is fast becoming a popular technique for thrust vectoring. The DTN is designed with two throats, an upstream minimum and a downstream minimum at the nozzle exit, with a cavity in between the upstream throat and exit. In the present study, a computational work has been carried out to analyze the performance of a dual throat nozzle at various mass flow rates of secondary flow and nozzle pressure ratios (NPR). Two-dimensional, steady, compressible Navier-Stokes equations were solved using a fully implicit finite volume scheme. The present computational results were validated with available experimental data. Based on the present results, the control effectiveness of thrust-vectoring is discussed in terms of the thrust coefficient and the coefficient of discharge.
文摘Aiming at the deficiencies of notch filters on the aspect of vibration suppression for elastic missile with swing nozzle thrust vector control(SNTVC),an active vibration controller(AVC)is proposed.It is composed of an optimal state feedback controller(OSFC)and an optimal minimal order state observer(OMOSO),which can be respectively designed based on the separation principle.The design rules of these two elements are successively given.Computer simulation results present that AVC can realize strong vibration suppression and good convergence property after disturbing.Moreover,it has simple design and then it is easily implemented in engineering.In addition,the AVC scheme can also resolve the poor system stability to a great extent,which is resulted from the bad static stability of missile body.
