In this pape,we give four methods of discriminations its nonsingularity by utilizing only parametr r1,r2 and elements of the first row of level-2 (r1, r2)-circulant matrices of type (m,n).
In order to effectively predict the fracture of AA7075-T6 sheet, the forming limit curves of AA7075-T6 high-strength sheet were drawn according to Morciniak Kuczyski (M K) model and Lou Huh criterion, respectively. Th...In order to effectively predict the fracture of AA7075-T6 sheet, the forming limit curves of AA7075-T6 high-strength sheet were drawn according to Morciniak Kuczyski (M K) model and Lou Huh criterion, respectively. The errors between the predicted values of the two theoretical prediction models and experimental values were calculated by error analysis. The forming limit curves were verified by the punch stretch test to evaluate the prediction accuracy of M K model and Lou Huh criterion. The error analysis results show that the mean error of Lou Huh criterion with the optimal parameters for all tensile specimens is 25.04%, while the mean error of M K model for all tensile specimens is 74.24%. The prediction accuracy of Lou Huh criterion in predicting the fracture of AA7075-T6 sheet is higher. The punch stretch test results show that the forming limit curve drawn by Lou Huh criterion can effectively predict the fracture of AA7075-T6 sheet, but the prediction accuracy of M K model is relatively poor.展开更多
The current research of the Q-P and Q-P-T process has been focused on controlling the heating temperature and holding time,or adding alloy elements into the steel to induce precipitation strengthening and improve the ...The current research of the Q-P and Q-P-T process has been focused on controlling the heating temperature and holding time,or adding alloy elements into the steel to induce precipitation strengthening and improve the strength and plasticity of the steel.In this article,based on a quenching-partitioning-tempering(Q-P-T)process combined with a hot deformation technology,a deforming-quenching-partitioning-tempering(D-Q-P-T)process was applied to medium carbon steel.The effect of the heat treatment parameters on the microstructure and mechanical properties of experimental steel under deformation was studied.Through use of a scanning electron microscope(SEM),transmission electron microscopy(TEM)and tensile tests,the optimal heat treatment conditions for realizing high strength and plasticity that meet the safety requirements were obtained.The mechanism for the D-Q-P-T process to improve the strength and plasticity of experimental steel was discussed.A multiphase composite structure of lath martensite and retained austenite was obtained.Compared with the Q-P-T process,use of the D-Q-P-T process can increase the strength of steel by 57.77 MPa and the elongation by 5%.This study proposes a method to improve the strength and plasticity of steel.展开更多
It is generally agreed that appropriate content of boron is beneficial to mechanical properties of many superalloys. In an effort to improve stress rupture properties of a new superalloy M951, the content of boron is ...It is generally agreed that appropriate content of boron is beneficial to mechanical properties of many superalloys. In an effort to improve stress rupture properties of a new superalloy M951, the content of boron is optimized. Stress rupture tests were carried out using a FC-20 high temperature creep testing machine. The micro- structure, fracture surface and dislocation structure were investigated by optical microscopy, scanning electron microscopy and transmitting electron microscopy. The results indicate that the addition of boron improves the stress-rupture life at 1100℃ and 40MPa, but does not affect elongation remarkably. The stress-rupture life is the longest when the content of boron is 0.024%. Boron also enhances the tensile ductility and has no obvious effect on the tensile strength.展开更多
文摘In this pape,we give four methods of discriminations its nonsingularity by utilizing only parametr r1,r2 and elements of the first row of level-2 (r1, r2)-circulant matrices of type (m,n).
基金Project (51775481) supported by the National Natural Science Foundation of ChinaProject (E2019203418) supported by the Natural Science Foundation of Hebei Province, ChinaProject (ZD2017078) supported by the Science and Technology Plan of Hebei Higher School of Education Department, China。
文摘In order to effectively predict the fracture of AA7075-T6 sheet, the forming limit curves of AA7075-T6 high-strength sheet were drawn according to Morciniak Kuczyski (M K) model and Lou Huh criterion, respectively. The errors between the predicted values of the two theoretical prediction models and experimental values were calculated by error analysis. The forming limit curves were verified by the punch stretch test to evaluate the prediction accuracy of M K model and Lou Huh criterion. The error analysis results show that the mean error of Lou Huh criterion with the optimal parameters for all tensile specimens is 25.04%, while the mean error of M K model for all tensile specimens is 74.24%. The prediction accuracy of Lou Huh criterion in predicting the fracture of AA7075-T6 sheet is higher. The punch stretch test results show that the forming limit curve drawn by Lou Huh criterion can effectively predict the fracture of AA7075-T6 sheet, but the prediction accuracy of M K model is relatively poor.
基金Supported by Regional Joint Funds of National Natural Science Foundation of China(Grant No.U20A20289).
文摘The current research of the Q-P and Q-P-T process has been focused on controlling the heating temperature and holding time,or adding alloy elements into the steel to induce precipitation strengthening and improve the strength and plasticity of the steel.In this article,based on a quenching-partitioning-tempering(Q-P-T)process combined with a hot deformation technology,a deforming-quenching-partitioning-tempering(D-Q-P-T)process was applied to medium carbon steel.The effect of the heat treatment parameters on the microstructure and mechanical properties of experimental steel under deformation was studied.Through use of a scanning electron microscope(SEM),transmission electron microscopy(TEM)and tensile tests,the optimal heat treatment conditions for realizing high strength and plasticity that meet the safety requirements were obtained.The mechanism for the D-Q-P-T process to improve the strength and plasticity of experimental steel was discussed.A multiphase composite structure of lath martensite and retained austenite was obtained.Compared with the Q-P-T process,use of the D-Q-P-T process can increase the strength of steel by 57.77 MPa and the elongation by 5%.This study proposes a method to improve the strength and plasticity of steel.
文摘It is generally agreed that appropriate content of boron is beneficial to mechanical properties of many superalloys. In an effort to improve stress rupture properties of a new superalloy M951, the content of boron is optimized. Stress rupture tests were carried out using a FC-20 high temperature creep testing machine. The micro- structure, fracture surface and dislocation structure were investigated by optical microscopy, scanning electron microscopy and transmitting electron microscopy. The results indicate that the addition of boron improves the stress-rupture life at 1100℃ and 40MPa, but does not affect elongation remarkably. The stress-rupture life is the longest when the content of boron is 0.024%. Boron also enhances the tensile ductility and has no obvious effect on the tensile strength.
