Magnesium oxide(MgO)nanoadsorbents in wastewater treatment:A comprehensive review

Wastewater contamination by heavy metals and synthetic dyes presents a significant environmental challenge,necessitating effective and sustainable separation techniques.This review article provides a detailed examination of magnesium oxide(MgO)nanoparticles as an innovative nanoadsorbent for wastewater treatment,with a specific focus on heavy metal and dye removal.The review comprehensively explores various aspects of MgO nanoparticles,including their structural characteristics and synthesis techniques.The article delves into the morphology and crystallographic arrangement of MgO nanoparticles,offering insights into their structural attributes.Given the complexity of adsorption processes,the review identifies and analyzes parameters influencing the adsorption efficiency of MgO nanoparticles,such as temperature,pH,contact time,initial concentration,and co-existing ions.The interplay between these parameters and the adsorption capability of MgO nanoparticles emphasizes the importance of optimizing operational conditions.Furthermore,the review assesses various synthesis methods for MgO nanoparticles,including sol-gel,hydrothermal,precipitation,green synthesis,solvothermal,and template-assisted techniques.It discusses the advantages,limitations,and resulting nanoparticle characteristics of each method,enabling readers to grasp the implications of synthesis processes on adsorption efficiency.This comprehensive review consolidates current insights into the effectiveness of MgO nanoparticles as a potent nanoadsorbent for removing heavy metals and dyes from wastewater covering a wide spectrum of aspects related to MgO nanoparticles.Moreover,there is a need to investigate the use of MgO in the treatment of actual wastewater or river water,in order to leverage its cost-effectiveness and high efficiency for practical water treatment applications in real-time.

Stability of expanded granular sludge bed process for terylene artificial silk printing and dyeing wastewater treatment

Terylene artificial silk printing and dyeing wastewater(TPD wastewater), containing averaged 710 mg/L terephthalic acid(TA) as the main carbon source and the character pollutant, was subjected to expanded granular sludge bed(EGSB) process. The stability of the EGSB process was firstly conducted by laboratory experiment. TA ionization was the predominated factor influencing the acid-base balance of the system. High concentration of TA in wastewater resulted in sufficient buffering capacity to neutralize the volatile fatty acids(VFA) generated from substrate degradation and provided strong base for anaerobic system to resist the pH decrease below 6.5. VFA and UFA caused almost no inhibition on the anaerobic process and biogas production except that pH was below 6.35 and VFA was at its maximum value. Along with the granulating of the activated sludge, the efficiency of organic removal and production rate of biogas increased gradually and became more stable. After start-up, the efficiency of COD removal increased to 57%—64%, pH stabilized in a range of 7.99—8.04, and production rate of biogas was relatively high and stable. Sludge granulating, suitable influent of pH and loading were responsible for the EGSB stability. The variation of VFA concentration only resulted in neglectable rebound of pH, and the inhibition from VFA could be ignored in EGSB. The EGSB reactor was stable for TPD wastewater treatment.

Dyeing and printing wastewater treatment using fly-ash coated with chitosan

Printing and dyeing industry is a considerable source of environmental contamination. In this study treatment of printing and dyeing wastewater with a new type of sewage treatment agent, fly-ash coated with chitosan particles （FCCP）, was examined. The effects ofpH, stirring time, sedimentation time and temperature on color, COD, turbidity and NH3-N removal were determined. The optimum dosage of FCCP and the influence of individual factors on removal efficiency were tested. The optimum parameters determined using the L16 （45） orthogonal experiment were as follows： FCCP （weight ratio of chitosan to fly-ash 1：6） dosage, 4 g.L^-1; temperature, 35℃; pH, 4. The stirring time and sedimentation time were 20 min and 5 h, respectively. Under these optimum conditions, the color, COD and NH3-N removal ratios were 97%, 80% and 75%, respectively.

A pilot scale anoxic/oxic membrane bioreactor(A/O MBR) for woolen mill dyeing wastewater treatment

A pilot scale(10 m 3/d) anoxic/oxic membrane bioreactor(A/O MBR) was tested for dyeing wastewater treatment of woolen mill without wasting sludge in 125 days operation. Results showed that the effluent quality was excellent, i.e. effluent COD less than 25 mg/L, BOD 5 under 5 mg/L, turbidity lower than 0 65 NTU, and colour less than 30 DT, and met with the reuse water standard of China. The removal rates of COD, BOD 5, colour, and turbidity were 92 4%, 98 4%, 74% and 98 9%, respectively. Constant flux operation mode was carried out in this study, and backwash was effective for reducing membrane fouling and maintaining constant flux. Membrane fouling had heavy impact on energy consumption. More attention should be paid on pipe selection and design for the sidestream MBR system, too.

Treatment of anthraquinone dye wastewater by hydrolytic acidification-aerobic process

Experiment on microbial degradation with two kinds of biological process, hydrolytic acidification-aerobic process and aerobic process was conducted to treat the anthraquinone dye wastewater with COD Cr concentration of 400 mg/L and chroma 800. The experimental result demonstrated that the hydrolytic-aerobic process could raise the biodegradability of anthraquinone dye wastewater effectively. The effluent COD Cr can reach 120170 mg/L and chroma 150 which is superior to that from simple aerobic process.

Preparation and characterization of Fe_2O_3-CeO_2-TiO_2/γ-Al_2O_3 catalyst for degradation dye wastewater

In order to develop a catalyst with high activity for catalytic wet oxidation （CWO） process at room temperature and atmospheric pressure, Fe2O3-CeO2-TiO2/γ-Al2O3 catalyst was prepared by consecutive impregnation method and the prepared parameters were optimized. The structure of the catalyst was characterized by BET, XRF, SEM and XPS technologies, and the actual wastewater was used to investigate the catalytic activity of Fe2O3-CeO2-TiO2/γ-Al2O3 in CWO process. The experimental results showed that the prepared catalyst exhibited good catalytic activity when the doping amount of Ti was 1.0 wt% （the weight ratio of Ti to carriers）, and the middle product, Fe2O3-CeO2-TiO2/γ-Al2O3, was calcined in 450℃ for 2 h. The CWO experiment for treating actual dye wastewater indicated that the COD, color and TOC of actual wastewater were decreased by 62.23%, 50.12% and 41.26% in 3 h, respectively, and the ratio of BOD5/COD was increased from 0.19 to 0.30.

Charged modified tight ceramic ultrafiltration membranes for treatment of cationic dye wastewater

Tight ceramic ultrafiltration membranes have been proven to exhibit good rejection performance for reactive dye wastewater at high temperatures because of their high thermal and chemical resistance.However,the application of ceramic membranes for the treatment of cationic dye wastewater is challenging because of their surface charge.In this study,a ceramic membrane is modified by grafting aminosilane(KH-551)to enhance the positive charge of the membrane surface.The rejection performance of the charged modified ceramic membrane toward the methylene blue solution is significantly improved.The modification substance is bonded to the ceramic membrane surface via covalent bonding,which imparts good thermal stability.The modified ceramic membrane exhibits stable separation performance toward the methylene blue solution.Overall,this study provides valuable guidance for the adjustment of the ceramic membrane surface charge for treating industrial cationic dye wastewater.

Biodegradability of terephthalic acid in terylene artificial silk printing and dyeing wastewater

As the characteristic pollutant, terephthalic acid(TA)was in charge of 40%—78% of the total COD of terylene artificial silk printing and dyeing wastewater(TPW-water). The studies on biodegradability of TA were conducted in a serial of activated sludge reactors with TPW-water. TA appeared to be readily biodegradable with removal efficiency over 96.5% under aerobic conditions, hardly biodegradable with removal efficiency below 10% under anoxic conditions and slowly biodegradable with a turnover between 31.4% and 56.0% under anaerobic conditions. TA also accounted for the majority of BOD in TPW-water. The process combined by anoxic, anaerobic and aerobic activated sludge reactor was suitable for TA degradation and TPW-water treatment. Further, the aerobic process was essentially much more effective than the anaerobic or anoxic one to degrade TA in TPW-water.

Treatment of Practical Dye Wastewater Using a Double Dielectric Barrier Discharge System Combined with a Sequencing Batch Reactor System

Synthetic dyes are substances that are relatively stable and difficult to degrade in wastewater treatment plants using normal physical,chemical or / and biological treatment. The present work explored the synergistic effect of non-thermal plasma( NTP) and biological wastewater treatment technologies on practical dye wastewater degradation by establishing a double dielectric barrier discharge( DDBD) system combined with a sequencing batch reactor( SBR) system. The biodegradation and degradation efficiency of the DDBD-SBR system was investigated. The investigation results indicated that the DDBD technology was effective in treating the practical dye wastewater as a pre-treatment process. After a 10-min treatment,although the total organic carbon( TOC) removal efficiency was not so significant, the decolouration and the biodegradation were improved greatly. The microbial toxicity test revealed that the sample after degradation became less toxic than the original dye,which demonstrated the treatment had a significant effect on the reduction of toxicity. In addition,the SBR technology remedied the defects of DDBD treatment and improved TOC removal efficiency noticeably. The hybrid DDBD-SBR system made full use of the advantages of the individual technologies and exhibited an efficient capability for practical dye wastewater treatment.

Advancements in adsorption and photodegradation technologies for Rhodamine B dye wastewater treatment:fundamentals,applications,and future directions

Organic dye pollutants present in wastewater pose a significant global challenge.Among pollutants,the synthetic dye Rhodamine B(RB)stands out due to its non-biodegradable nature and associated neurotoxic,carcinogenic,and respiratory irritant properties.Extensive research has been conducted on the efficacy of adsorption and photodegradation techniques for the removal of RB from wastewater.While adsorption and advanced oxidation processes(AOPs)have gained considerable attention for their effectiveness in recent years,the underlying behaviors and mechanisms of these technologies remain incompletely understood.Therefore,a comprehensive of recent research progress in this domain is imperative to clarify the basics and present the up-to-date achievements.This review provides an in-depth exploration of the fundamentals,advancements,and future trajectories of RB wastewater treatment technologies,mainly encompassing adsorption and photodegradation.This work starts with a general introduction of outlining the sources,toxicity,and diverse applicable removal strategies.Subsequently,it thoroughly examines crucial techniques within non-photochemical,photochemical,and adsorption technologies,such as UV light assisted AOP,catalyst assisted AOP,ozonation,Fenton system,electrochemical AOP,and adsorption technology.The primary objective is to furnish a broad overview of these techniques,elucidating their effectiveness,limitations,and applicability.Following this,the review encapsulates state-of-theart computational simulations pertaining to RB adsorption and interactions with clays and other adsorbents.Lastly,it delves into column adsorption of RB dye,and elucidates various influencing factors,including bed height,feed concentration,pollutant(RB)feeding or flow rate,and column regeneration.This panoramic review aims to provide valuable insights into suitable techniques,research gaps,and the applicability of nonphotochemical,photochemical,and adsorption technologies in the treatment of wastewater containing RB dye.

An innovative integrated oxidation ditch with vertical circle(IODVC) for wastewater treatment

The oxidation ditch process is economic and efficient for wastewater treatment, but its application is limited in case where land is costly due to its large land area required. An innovative integrated oxidation ditch with vertical circle(IODVC) system was developed to treat domestic and industrial wastewater aiming to save land area. The new system consists of a single channel divided into two ditches(the top one and the bottom one by a plate), a brush, and an innovative integral clarifier. Different from the horizontal circle of the conventional oxidation ditch, the flow of IODVC system recycles from the top zone to the bottom zone in the vertical circle as the brush is running, and then the IODVC saved land area required by about 50% compared with a conventional oxidation ditch with an intrachannel clarifier. The innovative integral clarifier is effective for separation of liquid and solids, and is preferably positioned at the opposite end of the brush in the ditch. It does not affect the hydrodynamic characteristics of the mixed liquor in the ditch, and the sludge can automatically return to the down ditch without any pump. In this study, experiments of domestic and dye wastewater treatment were carried out in bench scale and in full scale, respectively. Results clearly showed that the IODVC efficiently removed pollutants in the wastewaters, i.e., the average of COD removals for domestic and dye wastewater treatment were 95% and 90%, respectively, and that the IODVC process may provide a cost effective way for full scale dye wastewater treatment.

Efficient decolorization of dye-containing wastewater using mycelial pellets formed of marine-derived Aspergillus niger

In order to improve the efficient decolorization of dye-containing water by biosorbent and understand the biosorption mechanism, the self-immobilization mycelial pellets were prepared using a marine-derived fungus Aspergillus niger ZJUBE-1, and an azo dye, Congo red was chosen as a model dye to investigate batch decolorization efficiency by pellets. The pellets as biosorbent showed strong salt and acid tolerance in biosorption process. The results for dye adsorption showed that the biosorption process fitted well with models of pseudo-second-order kinetic and Langmuir isotherm, with a maximum adsorption capacity of 263.2 mg·g^(-1) mycelium. During 6 batches of continuous decolorization operation, the mycelial pellets could possess efficient decolorization abilities(>98.5%).The appearance of new peak in the UV–Vis spectral result indicated that the decolorization process may also contain biodegradation. The mechanism studies showed that efficient biosorption ability of pellets only relies on the active zone on the surface of the pellet, which can be enhanced by nutrition supplement or be shifted outward by a reculture process.

Removal of Dyes from Wastewater by Adsorption onto Activated Carbon: Mini Review

Nowadays, wastewater from dyeing industries became a challenging issue in the world. Researchers have reported several techniques to treat those effluents based on their projects. Adsorption is the most common method because of cheap, simple and effective method. In this work, activated carbon was used for dye adsorption purpose. This adsorbent has high surface area and high porosity to remove dye. This review highlighted some important results of the last few years regarding the use of activated carbon in wastewater treatment. Research findings supported that adsorption process is spontaneous in nature. Adsorption data confirmed Langmuir model, indicating the chemisorption occurred.

ADSORPTION AND DESORPTION OF DSD ACID MANUFACTURING WASTEWATER ON MACROPOROUS RESIN

4,4’-diaminostilbene-2, 2’-disulfonic acid (DSD acid) manufacturing wastewater was treated by a macroporous resin in a fixed-bed column. The results showed that this method was suitable for removal of chemical oxygen demands (COD) and color. About 91% COD and 99.5% color removal were obtained under the optimum adsorption conditions, i.e. temperature 20℃, flow rate 1bed volume/hour (BV/hr) and pH1-2. The resin was efficiently regenerated with aqueous sodium hydroxide and water. Furthermore, 65.5% of 4,4’-dinitrostilbene-2, 2’-disulfonic acid (DNS) could be recovered from wastewater for possible recycling to the manufacturing process. The adsorption capacity of resin remained constant during the repetition process of adsorption and desorption.

Wastewater treatment using Fe-doped perovskite manganites by photocatalytic degradation of methyl orange,crystal violet and indigo carmine dyes in tungsten bulb/sunlight

We documented(ⅰ) the decolorization of wastewater in visible light,which contains methyl orange,crystal violet and indigo carmine dyes,using La_(0.7)Sr_(0.3)Mn_(1-x)Fe_(x)O_(3)(x=0.0,0.05,0.1 and 0.5) manganites and(ⅱ) efficient separation of photocatalysts from water using magnetic field.These ceramic photocatalysts were sintered at 1050℃ for 12 h.Ceramics were characterized by X-ray diffraction(XRD),soft X-ray absorption spectroscopy(SXAS),Fourier transform infrared spectroscopy(FTIR) and UV-visible diffuse reflectance spectroscopy(DRS).SXAS studies show the presence of Mn(Mn^(3+)/Mn^(4+)) and Fe(Fe^(3+)/Fe^(4+)) mixes valences in Fe-doped compositions.Optical band gap is found in visible light range for La_(0.7)Sr_(0.3)Mn_(1-x)Fe_(x)O_(3)(x=0.0,0.05,0.1) compositions.La_(0.7)Sr_(0.3)MnO_(3) degrades 94.6% methyl orange in7 min,81.9% crystal violet in 10 min and 99.1% indigo carmine in 5 min.La_(0.7)Sr_(0.3)Mn_(0.9)Fe_(0.1)O_(3) degrades the 92.6% methyl orange dye solution in 9 min,94.8% crystal violet in 25 min and 97.1% indigo carmine in3 min.Parent and Fe doped manganites can be separated in 60 s from wastewater.

Potential of plant polyphenol oxidases in the decolorization and removal of textile and non-textile dyes

In this study an effort has been made to use plant polyphenol oxidases; potato （Solanum tuberosum） and brinjal （Solanum melongena）, for the treatment of various important dyes used in textile and other industries. The ammonium sulphate fractionated enzyme preparations were used to treat a number of dyes under various experimental conditions. Majority of the treated dyes were maximally decolorized at pH 3.0. Some of the dyes were quickly decolorized whereas others were marginally decolorized. The initial first hour was sufficient for the maximum decolorization of dyes. The rate of decolorization was quite slow on long treatment of dyes. Enhancement in the dye decolorization was noticed on increasing the concentration of enzymes. The complex mixtures of dyes were treated with both preparations of polyphenol oxidases in the buffers of varying pH values. Potato polyphenol oxidase was significantly more effective in decolorizing the dyes to higher extent as compared to the enzyme obtained from brinjal polyphenol oxidase. Decolorization of dyes and their mixtures, followed by the formation of an insoluble precipitate, which could be easily removed simply by centrifugation.

Synthesis of activated carbons from black sapote seeds,characterization and application in the elimination of heavy metals and textile dyes

Many different techniques may be used to remove industrial pollutants from wastewater. Adsorption using activated carbon has been reported to be an effective method. This work proposes the use of a vegetable residue(black sapote seeds) as a raw material for its synthesis. These carbons were chemically activated using phosphoric acid and carbonized at 673 and 873 K. Adsorption isotherms were constructed for the textile dyes on the carbons, and this data was treated using Langmuir’s equation to quantitatively describe the adsorption process. The synthesized carbons were characterized using FTIR, EA, SEM, Nitrogen adsorption(specific surface areas of 879 and 652 m2·g-1), and their points of zero charge(2.1 and 2.3). It was possible to adsorb both heavy metals and textile dyes present in aqueous solutions and wastewaters using these activated carbons. Heavy metals were adsorbed almost completely by both carbons. Cationic dyes where adsorbed(58–59.8 mg·g-1) in greater amounts compared to anionic dyes(10–58.8 mg·g-1). The amount of anionic dyes adsorbed increased almost 30% by changing the pH of the solutions. One of the carbons was thermally regenerated on three occasions without losing its adsorption capacity and it was proved in a flow system.

沸石咪唑酯骨架-8的制备及其对刚果红的吸附性能

为制备印染废水的吸附材料,以六水合硝酸锌和2-甲基咪唑为原材料,以去离子水作溶剂,采用水溶剂法制备沸石咪唑酯骨架-8(ZIF-8)材料。借助扫描电子显微镜、红外光谱仪、X射线衍射仪等探究ZIF-8材料的结构,测试其对阴离子刚果红染料的吸附性能,并分析其吸附机制。结果表明:ZIF-8颗粒大小均匀,表面光滑,呈多面体结构;其热裂解温度为258℃,具有良好的热稳定性;ZIF-8对刚果红的吸附更符合准二级动力学模型和Langmuir吸附等温线模型,即以化学吸附为主且吸附位点等效;吸附过程为自发进行的放热反应,低温有利于吸附;在温度为20℃、pH值为7的条件下,ZIF-8对95 mg/L的刚果红溶液的吸附效果最佳,吸附量可达671.41 mg/g。

论纺织印染废水低碳治理

纺织印染行业是废水及污染物排放量最大的工业行业之一,同时也是能源密集及碳排放高的行业;废水低碳治理已成为纺织印染行业可持续发展的重要路径。在分析印染废水处理工艺温室气体排放特征的基础上,提出依据染化料助剂推定的碳排放潜势概念;针对纺织印染废水处理工艺复杂及水质时变性大的问题,建立了基于碳氮物料平衡的废水处理工艺碳排放精准核算方法。面向废水低碳处理运行需求,总结了纺织印染废水低碳治理技术进展及发展方向。

铁离子配位聚丙烯酸基芬顿催化纤维的制备及其性能

为改善聚丙烯酸(PAA)纤维的性能,在湿法纺丝过程中基于铁离子配位反应成功制备了可拉伸PAA初生纤维,利用后拉伸以及热定型工艺优化纤维性能,并探究其作为Fenton催化剂在染料废水处理领域的应用。结果表明:相较硫酸铁盐,氯化铁盐配位的PAA纤维具有更为优异的力学性能和尺寸稳定性;后拉伸和热定型工艺可显著提高PAA纤维的力学性能和催化活性,并抑制铁离子的流失,拉伸20倍且在130℃定型的纤维断裂强度为1.42 cN/dtex,与未拉伸纤维相比提高了914.3%,且可在3 min内脱色90%以上的亚甲基蓝(MB),循环使用40次未出现脱色率衰减现象。