The pursuit of incorporating eco-friendly reinforcing agents in polymer composites has accentuated the exploration of various natural biomass-derived materials.The burgeoning environmental crisis spurred by the discha...The pursuit of incorporating eco-friendly reinforcing agents in polymer composites has accentuated the exploration of various natural biomass-derived materials.The burgeoning environmental crisis spurred by the discharge of synthetic dyes into wastewater has catalyzed the search for effective and sustainable treatment technologies.Among the various sorbent materials explored,biochar,being renewable,has gained prominence due to its excellent adsorption properties and environmental sustainability.It has also emerged as a focal point for its potential to replace other conventional reinforcing agents,viz.,fumed silica,aluminum oxide,treated clays,etc.This study introduces a novel class of polymer nanocomposites comprising of lignin-based biochar particles and poly(ester amide urethane)matrix via a feasible method.The structural evaluation of these nanocomposites was accomplished using Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,and powder X-ray diffraction.The polymer nanocomposites exhibited superior mechanical properties with an increment in tensile strength factor by 45%in comparison to its pristine matrix,along with an excellent toughness value of 90.22 MJm^(−3)at a low loading amount of only 1 wt%.The composites showed excellent improvement in thermal properties with a sharp rise in the glass transition temperature(Tg)value from−28.15℃to 84℃,while also championing sustainability through inherent biodegradability attributes.Beyond their structural prowess,these polymer nanocomposites demonstrated excellent potential as adsorbents,displaying efficient removal of malachite green and tartrazine dyes from aqueous systems with a removal efficiency of 87.25%and 73.98%,respectively.The kinetics study revealed the pseudo second order model to be the precision tool to assess the dye removal study.Complementing this,the Langmuir adsorption isotherm provided a framework to assess the sorption features of the polymer nanocomposites.Overall,these renewable biochar integrated polymer matrices boast remarkable recovery capabilities up to seven cycles of usage with an excellent dye recovery percentage of 95.21%for the last cycle,thereby defining sustainability as well as economic feasibility.展开更多
Hydrophilic hyperbranched poly(ester-amine) (HPEA) synthesized from diethanolamine and methyl acrylate was used as phase transfer agent for the first time to transfer methyl orange (MO) from water into chloroform. Thi...Hydrophilic hyperbranched poly(ester-amine) (HPEA) synthesized from diethanolamine and methyl acrylate was used as phase transfer agent for the first time to transfer methyl orange (MO) from water into chloroform. This process was quantified by UV-Vis spectra. A possible mechanism was put forward based on the formation of amphiphilic aggregates.展开更多
After gas drainage, the outburst seam is dry and, consequently, during subsequent mechanized mining, unwanted dust production is extensive. Because the hard dustfall typically has a small particle size it contains a h...After gas drainage, the outburst seam is dry and, consequently, during subsequent mechanized mining, unwanted dust production is extensive. Because the hard dustfall typically has a small particle size it contains a high percentage of respirable dust. Considering these factors, this paper improved the efficiency of dustfall by reducing the surface tension of the liquid used as a wetting agent, then configuring five kinds of wetting agents by adopting various doses and types of surfactants, neutral inorganic salts and chemical additives, etc. After purchasing DA-85 and SRJ-1 wetting agent, the surface tension and critical micelle concentration of seven kinds of wetting agents were measured using the capillary rise method. Wetting agent A was confirmed to have the best comprehensive effect. The experiments were optimized by measuring and comparatively analyzing contact angles of pure water, SRJ-1 wetting agent and wetting agent A on the surface of different coal samples using a contact angle measurement instrument （HARKE- SPCA）. By comparative analysis, dust-proof effects of seam, dynamic pressure water infusion and high- pressure spray in the tunneling face at the Daning coal mine using pure water, wetting agent SRJ-1 and A, it was determined that after using wetting agent A, the average dust concentration in the place of the mining machine driver, 10 m and 110 m away from the tunneling front is approximately 300 rag/ m^3, 240 mg/m^3 and 100 mg/m^3, respectively, This practice increased the dust-proof efficiency dramati- cally and achieved a good comprehensive dust-proof effect.展开更多
To remove effectively the pollutants from printing and dyeing wastewater, a new complex adsorption-coagulation agent was developed and employed in dyeing wastewater treatment. The experimental results showed that bett...To remove effectively the pollutants from printing and dyeing wastewater, a new complex adsorption-coagulation agent was developed and employed in dyeing wastewater treatment. The experimental results showed that better removals of COD, turbidity and color could be efficiently realized under the operating conditions of mixing at 150 r/min, reacting within 5 min and dosing at 15 g/L and 20 g/L, respectively. Combined with the settled sludge, the agent could be recycled for further adsorption and coagulation within 10 times. Compared to the conventional coagulants, the newly-developed agent had such merits as suitability for wide pH range of wastewater, less sludge production, reutilization of the condensed sludge and low operation cost.展开更多
文摘The pursuit of incorporating eco-friendly reinforcing agents in polymer composites has accentuated the exploration of various natural biomass-derived materials.The burgeoning environmental crisis spurred by the discharge of synthetic dyes into wastewater has catalyzed the search for effective and sustainable treatment technologies.Among the various sorbent materials explored,biochar,being renewable,has gained prominence due to its excellent adsorption properties and environmental sustainability.It has also emerged as a focal point for its potential to replace other conventional reinforcing agents,viz.,fumed silica,aluminum oxide,treated clays,etc.This study introduces a novel class of polymer nanocomposites comprising of lignin-based biochar particles and poly(ester amide urethane)matrix via a feasible method.The structural evaluation of these nanocomposites was accomplished using Fourier-transform infrared spectroscopy,X-ray photoelectron spectroscopy,and powder X-ray diffraction.The polymer nanocomposites exhibited superior mechanical properties with an increment in tensile strength factor by 45%in comparison to its pristine matrix,along with an excellent toughness value of 90.22 MJm^(−3)at a low loading amount of only 1 wt%.The composites showed excellent improvement in thermal properties with a sharp rise in the glass transition temperature(Tg)value from−28.15℃to 84℃,while also championing sustainability through inherent biodegradability attributes.Beyond their structural prowess,these polymer nanocomposites demonstrated excellent potential as adsorbents,displaying efficient removal of malachite green and tartrazine dyes from aqueous systems with a removal efficiency of 87.25%and 73.98%,respectively.The kinetics study revealed the pseudo second order model to be the precision tool to assess the dye removal study.Complementing this,the Langmuir adsorption isotherm provided a framework to assess the sorption features of the polymer nanocomposites.Overall,these renewable biochar integrated polymer matrices boast remarkable recovery capabilities up to seven cycles of usage with an excellent dye recovery percentage of 95.21%for the last cycle,thereby defining sustainability as well as economic feasibility.
文摘Hydrophilic hyperbranched poly(ester-amine) (HPEA) synthesized from diethanolamine and methyl acrylate was used as phase transfer agent for the first time to transfer methyl orange (MO) from water into chloroform. This process was quantified by UV-Vis spectra. A possible mechanism was put forward based on the formation of amphiphilic aggregates.
基金partly supported by the National Natural Science Foundation of China (No.51404263)the National Natural Science Foundation of Jiangsu Province (No.BK20130203)+3 种基金the Coal Mine Joint Funds of the National Natural Science Foundation of China (No.51134023)the State Key Laboratory Cultivation Base for Gas Geology and Gas Control (No.WS2013A05)the Priority Academic Program Development of Jiangsu Higher Education Institutions (PAPD)the independent study for State Key Laboratory of Coal Resources and Safe Mining,China University of Mining and Technology (No.SKLCRSM09X04)
文摘After gas drainage, the outburst seam is dry and, consequently, during subsequent mechanized mining, unwanted dust production is extensive. Because the hard dustfall typically has a small particle size it contains a high percentage of respirable dust. Considering these factors, this paper improved the efficiency of dustfall by reducing the surface tension of the liquid used as a wetting agent, then configuring five kinds of wetting agents by adopting various doses and types of surfactants, neutral inorganic salts and chemical additives, etc. After purchasing DA-85 and SRJ-1 wetting agent, the surface tension and critical micelle concentration of seven kinds of wetting agents were measured using the capillary rise method. Wetting agent A was confirmed to have the best comprehensive effect. The experiments were optimized by measuring and comparatively analyzing contact angles of pure water, SRJ-1 wetting agent and wetting agent A on the surface of different coal samples using a contact angle measurement instrument （HARKE- SPCA）. By comparative analysis, dust-proof effects of seam, dynamic pressure water infusion and high- pressure spray in the tunneling face at the Daning coal mine using pure water, wetting agent SRJ-1 and A, it was determined that after using wetting agent A, the average dust concentration in the place of the mining machine driver, 10 m and 110 m away from the tunneling front is approximately 300 rag/ m^3, 240 mg/m^3 and 100 mg/m^3, respectively, This practice increased the dust-proof efficiency dramati- cally and achieved a good comprehensive dust-proof effect.
文摘To remove effectively the pollutants from printing and dyeing wastewater, a new complex adsorption-coagulation agent was developed and employed in dyeing wastewater treatment. The experimental results showed that better removals of COD, turbidity and color could be efficiently realized under the operating conditions of mixing at 150 r/min, reacting within 5 min and dosing at 15 g/L and 20 g/L, respectively. Combined with the settled sludge, the agent could be recycled for further adsorption and coagulation within 10 times. Compared to the conventional coagulants, the newly-developed agent had such merits as suitability for wide pH range of wastewater, less sludge production, reutilization of the condensed sludge and low operation cost.
