Analysis on the turning point of dynamic in-plane compressive strength for a plain weave composite

Experimental investigations on dynamic in-plane compressive behavior of a plain weave composite were performed using the split Hopkinson pressure bar. A quantitative criterion for calculating the constant strain rate of composites was established. Then the upper limit of strain rate, restricted by stress equilibrium and constant loading rate, was rationally estimated and confirmed by tests. Within the achievable range of 0.001/s-895/s, it was found that the strength increased first and subsequently decreased as the strain rate increased. This feature was also reflected by the turning point(579/s) of the bilinear model for strength prediction. The transition in failure mechanism, from local opening damage to completely splitting destruction, was mainly responsible for such strain rate effects. And three major failure modes were summarized under microscopic observations: fiber fracture, inter-fiber fracture, and interface delamination. Finally, by introducing a nonlinear damage variable, a simplified ZWT model was developed to characterize the dynamic mechanical response. Excellent agreement was shown between the experimental and simulated results.

Correction of dynamic Brazilian disc tensile strength of rocks under preloading conditions considering the overload phenomenon and invoking the Griffith criterion

Dynamic tensile failure is a common phenomenon in deep rock practices,and thus accurately evaluating the dynamic tensile responses of rocks under triaxial pressures is of great significance.The Brazilian disc(BD)test is the suggested method by the International Society for Rock Mechanics and Rock Engineering(ISRM)for measuring both the static and dynamic tensile strengths of rock-like materials.However,due to the overload phenomenon and the complex preloading conditions,the dynamic tensile strengths of rocks measured by the BD tests tend to be overestimated.To address this issue,the dynamic BD tensile strength(BTS)of Fangshan marble(FM)under different preloading conditions were measured through a triaxial split Hopkinson pressure bar(SHPB).The fracture onset in BD specimen was captured through a strain gage around the disc center.The discrepancy between the traditional tensile strength(TTS,determined by the peak load P_(f) of the BD specimen)and the nominal tensile strength(NTS,obtained from the load P_(i) when the diametral fracture commences in the tested BD specimen)was applied to quantitatively evaluating the overload phenomenon.The Griffith criterion was used to rectify the calculation of the tensile stress at the disc center under triaxial stress states.The results demonstrate that the overload ratio(s)increases with the loading rate(σ)and decreases with the hydrostatic pressure(σ_(s)).The TTS corrected by the Griffith criterion is independent of theσ_(s)due to the overload phenomenon,while the NTS corrected by the Griffith criterion is sensitive to both the andσ.Therefore,it is essential to modify the tensile stress in dynamic confined BD tests using both the overload correction and the Griffith criterion rectification to obtain the accurate dynamic BTS of rocks.

A viscoelastic-plastic constitutive model with Mohr-Coulomb yielding criterion for sea ice dynamics

A new viscoelastic-plastic （VEP） constitutive model for sea ice dynamics was developed based on continuum mechanics. This model consists of four components： Kelvin-Vogit viscoelastic model, Mohr-Coulomb yielding criterion, associated normality flow rule for plastic rehololgy, and hydrostatic pressure. The numerical simulations for ice motion in an idealized rectangular basin were made using smoothed particle hydrodynamics （SPH） method, and compared with the analytical solution as well as those based on the modified viscous plastic（VP） model and static ice jam theory. These simulations show that the new VEP model can simulate ice dynamics accurately. The new constitutive model was further applied to simulate ice dynamics of the Bohai Sea and compared with the traditional VP, and modified VP models. The results of the VEP model are compared better with the satellite remote images, and the simulated ice conditions in the JZ20-2 oil platform area were more reasonable.

Strength criterion of composite solid propellants under dynamic loading

Based on the dynamic loading(1-100 s^(-1)) experiments under different temperatures(223-298 K) and stress states, uniaxial and biaxial strength criterion of a Hydroxyl-terminated polybutadiene(HTPB)based composite solid propellant were further investigated. These experiments were conducted through the use of a new uniaxial INSTRON testing machine, different new designed gripping apparatus and samples with different configurations. According to the test results, dynamic uniaxial tensile strength criterion of the propellant was directly constructed with the master curve of the uniaxial maximum tensile stress. Whereas, a new method was proposed to determine the dynamic uniaxial compressive strength of the propellant in this study. Then uniaxial compressive strength criterion of the propellant was constructed based on the related master curve. Moreover, it found that the uniaxial tensilecompressive strength ratio of the propellant is more sensitive to loading temperature under the test conditions. The value of this parameter is about 0.4 at room temperature, and it reduces to 0.2-0.3 at low temperatures. Finally, the theoretical biaxial strength criterion of HTPB propellant under dynamic loading was constructed with the unified strength theory, the uniaxial strength and the typical biaxial tensile strength. In addition, the theoretical limit lines of the principal stress plane for the propellant under dynamic loading at different temperatures were further plotted, and the scope of the limit line increases with decreasing temperature.

Auditory BCI Research Using Spoken Digits Stimulation and Dynamic Stopping Criterion

Auditory brain-computer interfaces (BCI) provide a method of non-muscular commu-nication and control for late-stage amyotrophic lateral sclerosis (ALS) patients, who have impaired eye movements or compromised vision. In this study, random sequences of spoken digits were presented as auditory stimulation. According the protocol, the subject should pay attention to target digits and ignore non-target digits. EEG data were recorded and the components of P300 and N200 were extracted as features for pattern recognition. Fisher classifier was designed and provided likelihood estimates for the Dynamic Stopping Criterion (DSC). Dynamic data collection was controlled by a threshold of the posterior probabilities which were continually updated with each additional measurement. In addition, the experiment would be stopped and the decision was made once the probabilities were above the threshold. The results showed that this paradigm could effectively evoke the characteristic EEG, and the DSC algorithm could improve the accuracy and communication rate.

DYNAMIC TRAVERSAL CRITERION FOR GEOMETRIC FRACTALS

This paper presents a new generating criterion for self-similar geometric fractalsDynamic Traversal Criterion (DTC) and the principle to practice it. According to the principle,symbol shifting technique is put forward which can control the traversal symbols dynamically in recursive procession. The Dynamic Traversal Criterion inherits the mechanism for generating self-similar fractals from traditional way and creates more fractal images from one initiator and generator than Static traversal strategy.

An approximate nonlinear modified Mohr-Coulomb shear strength criterion with critical state for intact rocks

In this paper, the Mohr-Coulomb shear strength criterion is modified by mobilising the cohesion and internal friction angle with normal stress, in order to capture the nonlinearity and critical state concept for intact rocks reported in the literature. The mathematical expression for the strength is the same as the classical form, but the terms of cohesion and internal friction angle depend on the normal stress now,leading to a nonlinear relationship between the strength and normal stress. It covers both the tension and compression regions with different expressions for cohesion and internal friction angle. The strengths from the two regions join continuously at the transition of zero normal stress. The part in the compression region approximately satisfies the conditions of critical state, where the maximum shear strength is reached. Due to the nonlinearity, the classical simple relationship between the parameters of cohesion, internal friction angle and uniaxial compressive strength from the linear Mohr-Coulomb criterion does not hold anymore. The equation for determining one of the three parameters in terms of the other two is supplied. This equation is nonlinear and thus a nonlinear equation solver is needed. For simplicity, the classical linear relationship is used as a local approximation. The approximate modified Mohr-Coulomb criterion has been implemented in a fracture mechanics based numerical code FRACOD,and an example case of deep tunnel failure is presented to demonstrate the difference between the original and modified Mohr-Coulomb criteria. It is shown that the nonlinear modified Mohr-Coulomb criterion predicts somewhat deeper and more intensive fracturing regions in the surrounding rock mass than the original linear Mohr-Coulomb criterion. A more comprehensive piecewise nonlinear shear strength criterion is also included in Appendix B for those readers who are interested. It covers the tensile, compressive, brittle-ductile behaviour transition and the critical state, and gives smooth transitions.

New Oscillation Criteria of Second-Order Nonlinear Delay Dynamic Equations on Time Scales

By using the generalized Riccati transformation and the integral averaging technique, the paper establishes some new oscillation criteria for the second-order nonlinear delay dynamic equations on time scales. The results in this paper unify the oscillation of the second-order nonlinear delay differential equation and the second-order nonlinear delay difference equation on time scales. The Theorems in this paper are new even in the continuous and the discrete cases.

Modified Mohr-Coulomb strength criterion considering rock mass intrinsic material strength factorization

With the increase of mining depth of mineral resources,the rock mass stress state is being more and more complex.The rock mass show different features,namely,with the increase of hydrostatic pressure,rock mass failure mode turns from brittle tension failure to structure ductile failure and its limit strength also increases.The restriction of minimal principal stress on the initiation and development of microcrack and the change of micro-unit stress state by the intermediate principal stress play a decisive role in the increase of rock mass limit strength.Based on the rock mass failure behavior law under complex stress state and the σ2-dependence on the rock mass strength,we proposed a Modified Mohr-Coulomb(M-MC) strength criterion which is smooth and convex.Finally,the M-MC criterion is validated by multiaxial test data of eight kinds of rock mass.We also compared the fitting results with Mohr-Coulomb criterion(MC).It shows that the new criterion fits the test data better than the Mohr-Coulomb criterion.So the M-MC strength criterion well reveals the rock mass bearing behavior and can be widely used in the rock mass strength analysis.The results can provide theoretical foundations for stability analysis and reinforcement design of complex underground engineering.

Dynamic mechanical behaviors of Fangshan marble

Dynamic strength parameters are extensively used in mining engineering and rock mechanics.However,there are no widely accepted dynamic failure models for rocks.In this study,the dynamic punching shear strength,uniaxial compressive strength(UCS) and tensile strength of fine-grained Fangshan marble(FM)are first measured by using a split Hopkinson pressure bar(SHPB) system.The pulse-shaping technique is then implemented to maintain the dynamic force balance in SHPB tests.Experimental results show that the dynamic punching shear strength,UCS and tensile strength increase with the loading rate.A recently developed dynamic Mohr-Coulomb theory is then used to interpret the testing data.In this model,the angle of internal friction φ is assumed to be independent of loading rate and is obtained using the static strength values.According to the dynamic Mohr-Coulomb theory,the dynamic UCS and the dynamic tensile strength are predicted from the dynamic punching shear strength.Furthermore,based on this dynamic theory,the dynamic UCS is predicted from the dynamic tensile strength.The consistency between the predicted and measured dynamic strengths demonstrates that the dynamic Mohr-Coulomb theory is applicable to FM.

Dynamic mechanical properties and instability behavior of layered backfill under intermediate strain rates

To obtain dynamic mechanical properties and failure rule of layered backfill under strain rates from10to80s-1,impactloading test on layered backfill specimens(LBS)was conducted by using split Hopkinson pressure bar system.The results indicatethat positive correlation can be found between dynamic compressive strength and strain rate,as well as between strength increasefactor and strain rate.Dynamic compressive strength of LBS gets higher as the arithmetic average cement-sand ratio increases.Compared with static compressive strength,dynamic compressive strength of LBS is enhanced by11%to163%.In addition,theenergy dissipating rate of LBS lies between that of corresponding single specimens,and it decreases as the average cement contentincreases.Deformation of LBS shows obvious discontinuity,deformation degree of lower strength part of LBS is generally higherthan that of higher strength part.A revised brittle fracture criterion based on the Stenerding-Lehnigk criterion is applied to analyzingthe fracture status of LBS,and the average relevant errors of the3groups between the test results and calculation results are4.80%,3.89%and4.66%,respectively.

Determination of rock resistant coefficient based on Mohr-Coulomb criterion for underwater tunnel

According to the load-structure method, the wall rock with lining can bear the load caused by the surrounding rock, and the rock resistant coefficient (RRC) is a key parameter for evaluating the capacity of this wall rock. Based on the Mohr-Coulomb yield criterion, this paper develops a formula for calculating the RRC, which has been applied to the real engi-neering project, such as Xiamen Xiang’an East Passage Underwater Tunnel Project. The fact shows that this formula is helpful for designers to determine the RRC value.

Dynamic failure of dry and fully saturated limestone samples based on incubation time concept

This paper outlines the results of experimental study of the dynamic rock failure based on the comparison of dry and saturated limestone samples obtained during the dynamic compression and split tests. The tests were performed using the Kolsky method and its modifications for dynamic splitting. The mechanical data(e.g. strength, time and energy characteristics) of this material at high strain rates are obtained. It is shown that these characteristics are sensitive to the strain rate. A unified interpretation of these rate effects, based on the structuraletemporal approach, is hereby presented. It is demonstrated that the temporal dependence of the dynamic compressive and split tensile strengths of dry and saturated limestone samples can be predicted by the incubation time criterion. Previously discovered possibilities to optimize(minimize) the energy input for the failure process is discussed in connection with industrial rock failure processes. It is shown that the optimal energy input value associated with critical load, which is required to initialize failure in the rock media, strongly depends on the incubation time and the impact duration. The optimal load shapes, which minimize the momentum for a single failure impact, are demonstrated. Through this investigation, a possible approach to reduce the specific energy required for rock cutting by means of high-frequency vibrations is also discussed.

Upper bound analysis of ultimate pullout capacity of shallow 3-D circular plate anchors based on nonlinear Mohr-Coulomb failure criterion

Based on the nonlinear Mohr-Coulomb failure criterion and the associated flow rules,the three-dimensional(3-D)axisymmetric failure mechanism of shallow horizontal circular plate anchors that are subjected to the ultimate pullout capacity(UPC)is determined.A derivative function of the projection function for projecting the 3-D axisymmetric failure surface on plane is deduced using the variation theory.By using difference principle,the primitive function of failure surface satisfying boundary condition and numerical solution to its corresponding ultimate pullout capacity function are obtained.The influences of nonlinear Mohr-Coulomb parameters on UPC and failure mechanism are studied.The result shows that UPC decreases with dimensionless parameter m and uniaxial tensile strength increases but increases when depth and radius of plate anchor,surface overload,initial cohesion,geomaterial density and friction angle increase.The failure surface is similar to a symmetrical spatial funnel,and its shape is mainly determined by dimensionless parameter m;the surface damage range expands with the increase of radius and depth of the plate anchor as well as initial cohesion but decreases with the increase of dimensionless parameter m and uniaxial tensile strength as well as geomaterial density.As the dimensionless parameter m=2.0,the numerical solution of UPC based on the difference principle is proved to be feasible and effective through the comparison with the exact solution.In addition,the comparison between solutions of UPC computed by variation method and those computed by upper bound method indicate that variation method outperforms upper bound method.

Oscillation Criteria for Third-order NonlinearNeutral Dynamic Equations on Time Scales

Many practical problems, such as those from electronic engineering, mechanicalengineering, ecological engineering, aerospace engineering and so on, need to bedescribed by dynamic equations on time scales, so it is important in theory andpractical significance to study these equations. In this paper, the oscillation andasymptotic behavior of third-order nonlinear neutral delay dynamic equations ontime scales are studied by using generalized Riccati transformation technique, integralaveraging methods and comparison theorems. The main purpose of this paperis to establish some new oscillation criteria for such dynamic equations. The newKamenev criteria and Philos criteria are given, and an example is considered toillustrate our main results.

Cracking Patterns of Shear Walls in Reinforced Concrete Structure due to Strong Earthquake Based on Mohr-Coulomb Criterion

A primary goal of seismic design of buildings is to protect people's life safety during strong earthquakes. Fundamentally,to predict the survived space and estimate people escape intervals during structural collapse are very important,which requires to describe the failure process more detailedly not only for structural joints but also for slabs and shear walls. In the present paper,the details of Mohr-Coulomb failure criterion with tension-cutoff together with its expression in failure surface and local coordinate system of reinforced concrete( RC) shear wall are given firstly,and then several typical cracking patterns of RC shear wall,such as tension shear crack and compression shear crack, are analyzed based on Mohr-Coulomb failure criterion with tension-cutoff.

Threshold characteristics of short-pulsed loads combined with the ultrasound field causing dynamic delamination of adhesive joints

In the present work, we analyse the delamination problem under the combined dynamic load. We show the effect of background harmonic vibrations on critical amplitudes of the principal force pulse. The effect is demonstrated on the simple model of a string on an elastic foundation and the fracture phenomenon is predicted by the incubation time criterion. The results state the possibility of considerable decrease in threshold amplitude by a proper choice of the frequency of a background excitation.

DYNAMIC MIXED MODE FRACTURE INITIATION IN ROCK^+

In this paper, a distortion dynamic strain energy density factor criterion for dynamic mixed-mode fracture initiation in rock is suggested.The results of the investigation on 14 three-point bending (TPB) and four-point bending(FPB) rock specimens tested u

Research on dynamic stabilityrotational speed range of rolling projectiles with different characteristics

Traditional dynamic stability analyses of the rolling projectiles are mainly based on solving the systems＇ transfer functions or angular motion＇ s homogeneous equations to obtain their charac- teristic roots. The solving processes of these methods are complex and lacking further analysis of the results. To solve this problem, Routh stability criterion is introduced to determine the stability of rolling missiles based on the transfer function model, and an important advantage of this method is that it is unnecessary to solve the system＇ s characteristic equation. Rotational speed ranges satisfy- ing the dynamic stability of rolling projectiles with four different characteristics are acquired, and the correctness of analysis results is verified by computing the system＇ s root locus. The analysis results show that the relation between stability and rotational speed for static stable missiles is opposite to that for spin-stabilized projectiles, and the relative size of gyroscopic effect and Magnus effect has an extremely important influence on the trend of the stability of the system with increasing rotational speed.

基于动态空腔膨胀模型的土壤Mohr-Coulomb参数反演方法

为实现土壤原位力学参数的精准、快速解译,定量评估军事装备机动性,本文利用冲击贯入过程中测得的阻力-速度曲线、加速度时程曲线、速度时程曲线以及贯入深度-初速度关系,基于动态空腔膨胀模型建立了土壤Mohr-Coulomb参数的反演方法。本文分析表明准确拟合贯入阻力系数是反演Mohr-Coulomb参数的关键,而利用冲击贯入过程中的速度时程曲线进行拟合能够对Mohr-Coulomb参数进行准确的反演。针对Forrestal等人报道的实验结果,利用本文方法对土壤内聚力进行反演的相对误差为2.14%,对土壤内摩擦角反演的相对误差为9.77%。本文进一步给出了动态空腔膨胀模型下Mohr-Coulomb参数反演的可解域,讨论了参数敏感性。本文提出的反演方法突破了传统半经验解译方法中物理图像不清晰、经验参数依赖性强的问题,可为复杂地质环境下土壤Mohr-Coulomb参数快速确定及土壤承载力评估提供一个新的方法和途径。