The marine risers are often subjected to parametric excitations from the fluctuation top tension. The top tension on the riser may fluctuate with multiple frequencies caused by irregular waves. In this paper, the infl...The marine risers are often subjected to parametric excitations from the fluctuation top tension. The top tension on the riser may fluctuate with multiple frequencies caused by irregular waves. In this paper, the influence between different frequency components in the top tension on the riser system is theoretically simulated and analyzed. With the Euler-Bernoulli beam theory, a dynamic model for the vibrations of the riser is established. The top tension is set as fluctuating with time and it has two different frequencies. The influences from the fluctuation amplitudes, circular frequencies and phase angles of these frequency components on the riser system are analyzed in detail. When these two frequencies are fluctuating in the stable regions, the riser system may become unstable because ω1+ω2≈2Ωn. The fluctuation amplitudes of these frequencies have little effect on the components of the vibration frequencies of the riser. For different phase angles, the stability and dynamic behaviors of the riser would be different.展开更多
We experimentally observe the dynamic evolution of atoms in the evaporative cooling, by in-situ imaging the plugged hole of ultracold atoms. Ultracold rubidium atoms confined in a magnetic trap are plugged using a blu...We experimentally observe the dynamic evolution of atoms in the evaporative cooling, by in-situ imaging the plugged hole of ultracold atoms. Ultracold rubidium atoms confined in a magnetic trap are plugged using a blue-detuned laser beam with a waist of 20 m at a wavelength of 767 nm. We probe the variation of the atomic temperature and width versus the radio frequency in the evaporative cooling. Both the behaviors are in good agreement with the calculation of the trapping potential dressed by the rf signal above the threshold temperature,while deviating from the calculation near the phase transition. To accurately obtain the atomic width, we use the plugged hole as the reference to optimize the optical imaging system by precisely minimizing the artificial structures due to the defocus effect.展开更多
High-energy gas fracturing of shale is a novel,high efficacy and eco-friendly mining technique,which is a typical dynamic perturbing behavior.To effectively extract shale gas,it is important to understand the dynamic ...High-energy gas fracturing of shale is a novel,high efficacy and eco-friendly mining technique,which is a typical dynamic perturbing behavior.To effectively extract shale gas,it is important to understand the dynamic mechanical properties of shale.Dynamic experiments on shale subjected to true triaxial compression at different strain rates are first conducted in this research.The dynamic stress-strain curves,peak strain,peak stress and failure modes of shale are investigated.The results of the study indicate that the intermediate principal stress and the minor principal stress have the significant influence on the dynamic mechanical behaviors,although this effect decreases as the strain rate increases.The characteristics of compression-shear failure primarily occur in shale subjected to triaxial compression at high strain rates,which distinguishes it from the fragmentation characteristics observed in shale under dynamic uniaxial compression.Additionally,a numerical three-dimensional Split Hopkinson Pressure Bar(3D-SHPB),which is established by coupling PFC3D and FLAC3D methods,is validated to replicate the laboratory characteristics of shale.The dynamic mechanical characteristics of shale subjected to different confining stresses are systematically investigated by the coupling PFC3D and FLAC3D method.The numerical results are in good agreement with the experimental data.展开更多
In this paper,we propose a combined form of the bilinear Kadomtsev-Petviashvili equation and the bilinear extended(2+1)-dimensional shallow water wave equation,which is linked with a novel(2+1)-dimensional nonlinear m...In this paper,we propose a combined form of the bilinear Kadomtsev-Petviashvili equation and the bilinear extended(2+1)-dimensional shallow water wave equation,which is linked with a novel(2+1)-dimensional nonlinear model.This model might be applied to describe the evolution of nonlinear waves in the ocean.Under the effect of a novel combination of nonlinearity and dispersion terms,two cases of lump solutions to the(2+1)-dimensional nonlinear model are derived by searching for the quadratic function solutions to the bilinear form.Moreover,the one-lump-multi-stripe solutions are constructed by the test function combining quadratic functions and multiple exponential functions.The one-lump-multi-soliton solutions are derived by the test function combining quadratic functions and multiple hyperbolic cosine functions.Dynamic behaviors of the lump solutions and mixed solutions are analyzed via numerical simulation.The result is of importance to provide efficient expressions to model nonlinear waves and explain some interaction mechanism of nonlinear waves in physics.展开更多
This paper presents a numerical analysis of the dynamic transient behaviors of undersea cables.In this numerical study,the governing equations based on Euler-Bernoulli beam theory are adopted,and they can satisfy many...This paper presents a numerical analysis of the dynamic transient behaviors of undersea cables.In this numerical study,the governing equations based on Euler-Bernoulli beam theory are adopted,and they can satisfy many applications no matter what the magnitude of the cable tension is.The nonlinear coupled equations are solved by a popular central finite difference method,and the numerical results of transient behaviors are presented when several kinds of surrounding conditions,such as different towing speeds of surface vessel,different currents and waves with various frequencies and amplitudes,are exerted.Then a detailed comparison of the results,including the upper end tension and cable shape in time-domain,is made under the above external excitations,and finally the possible reasons for these are further explained.展开更多
Based on the Magneto-Hydro-Dynamic(MHD) theory, a united three-dimensional(3D) transient numerical model is developed to investigate the dynamic behaviors of arc plasma for a magnesium alloy AZ61A gas tungsten arc...Based on the Magneto-Hydro-Dynamic(MHD) theory, a united three-dimensional(3D) transient numerical model is developed to investigate the dynamic behaviors of arc plasma for a magnesium alloy AZ61A gas tungsten arc welding(GTAW) arc. The arc, electrode and workpiece are integrated into one calculation domain to avoid both presumed distribution of the current density at the electrode tip and the assumption of constant conditions of interface between welding arc and workpiece. The distributions of electric potential, current density, magnetic flux density, electromagnetic force, velocity, temperature, and pressure of the arc plasma in the 3D space are analyzed by using the numerical model. Results indicate that the maximum gradient of the electric potential in the whole arc space exists around the electrode tip, where the electric current density, electromagnetic force, and temperature are also the maximum. However, maximum pressure is found at the velocity stagnation, which is above the workpiece.Comparison between predicted temperature and measured one in arc region shows a good agreement.展开更多
The reliability and service life of wind turbines are influenced by the complex loading applied on the hub, especially amidst a poor external wind environment. A three-point elastic support, which includes the main be...The reliability and service life of wind turbines are influenced by the complex loading applied on the hub, especially amidst a poor external wind environment. A three-point elastic support, which includes the main bearing and two torque arms, was considered in this study. Based on the flexibilities of the planet carrier and the housing, a coupled dynamic model was developed for a wind turbine drive train. Then, the dynamic behaviors of the drive train for different elastic support parameters were computed and analyzed. Frequency response functions were used to examine how different elastic support parameters influence the dynamic behaviors of the drive train. Results showed that the elastic support parameters considerably influenced the dynamic behaviors of the wind turbine drive train. A large support stiffness of the torque arms decreased the dynamic response of the planet carrier and the main bearing, whereas a large support stiffness of the main bearing decreased the dynamic response of planet carrier while increasing that of the main bearing. The findings of this study provide the foundation for optimizing the elastic support stiffness of the wind turbine drive train.展开更多
This paper is a further study of reference [1]. In this paper, we mainly discuss the complicated dynamical behaviors resulting from a simple one-dimensional model of nonlinear ecosystems: fixed point motion, periodic ...This paper is a further study of reference [1]. In this paper, we mainly discuss the complicated dynamical behaviors resulting from a simple one-dimensional model of nonlinear ecosystems: fixed point motion, periodic motion and chaotic motion etc., and briefly discuss the universality of the complicated dynamical behaviors, which can be described by the first and the second M. Feigenbaun. constants. At last, we discuss the 'one-side lowering phenomenon' due to near unstabilization when the nonlinear ecosystem approaches bifurcation points from unbifurcation side. It is of important theoretical and practical meanings both in the development and utilization of ecological resources ar.d in the design and management of artifilial ecosystems.展开更多
The Schamel–Korteweg–de Vries equation is investigated by the approach of dynamics.The existences of solitary wave including ω-shape solitary wave and periodic wave are proved via investigating the dynamical behavi...The Schamel–Korteweg–de Vries equation is investigated by the approach of dynamics.The existences of solitary wave including ω-shape solitary wave and periodic wave are proved via investigating the dynamical behaviors with phase space analyses.The sufficient conditions to guarantee the existences of the above solutions in different regions of the parametric space are given.All possible exact explicit parametric representations of the waves are also presented.Along with the details of the analyses,the analytical results are numerically simulated lastly.展开更多
The dynamic mechanical behaviors of as-cast 1Cr25Ni20Si2 austenite stainless steel during hot deformation for been studied using Gleeble-1500 hot working simulator.The hot deformation equation, the deformation activa...The dynamic mechanical behaviors of as-cast 1Cr25Ni20Si2 austenite stainless steel during hot deformation for been studied using Gleeble-1500 hot working simulator.The hot deformation equation, the deformation activation energy, the criterion of occurring dynamic recrystallization and the relationship between peak strain and peak stress have been resulted through the experiments.展开更多
We study dynamical behaviors of traveling wave solutions to a Fujimoto-Watanabe equation using the method of dynamical systems. We obtain all possible bifurcations of phase portraits of the system in different regions...We study dynamical behaviors of traveling wave solutions to a Fujimoto-Watanabe equation using the method of dynamical systems. We obtain all possible bifurcations of phase portraits of the system in different regions of the threedimensional parameter space. Then we show the required conditions to guarantee the existence of traveling wave solutions including solitary wave solutions, periodic wave solutions, kink-like(antikink-like) wave solutions, and compactons. Moreover, we present exact expressions and simulations of these traveling wave solutions. The dynamical behaviors of these new traveling wave solutions will greatly enrich the previews results and further help us understand the physical structures and analyze the propagation of nonlinear waves.展开更多
Although the research history of triboelectrification has been more than 2000 years, there are still many problems to be solved so far.The use of scanning probe microscopy provides an important way to quantitatively s...Although the research history of triboelectrification has been more than 2000 years, there are still many problems to be solved so far.The use of scanning probe microscopy provides an important way to quantitatively study the transfer, accumulation, and dissipation of triboelectric charges in the process of triboelectrification. Two-dimensional materials are considered to be key materials for new electronic devices in the post-Moore era due to their atomic-scale size advantages. If the electrostatic field generated by triboelectrification can be used to replace the traditional gate electrostatic field, it is expected to simplify the structure of two-dimensional electronic devices and reconfigure them at any time according to actual needs. Here, we investigate the triboelectrification process of various two-dimensional materials such as MoS_(2), WSe_(2),and ZnO. Different from traditional bulk materials, after two-dimensional materials are rubbed, the triboelectric charges generated may tunnel through the two-dimensional materials to the underlying substrate surface. Because the tunneling triboelectric charge is protected by the twodimensional material, its stable residence time on the substrate surface can reach more than 7 days, which is more than tens of minutes for the traditional triboelectric charge. In addition, the electrostatic field generated by the tunneling triboelectric charge can effectively regulate the carrier transport performance of two-dimensional materials, and the source–drain current of the field effect device regulated by the triboelectric floating gate is increased by nearly 60 times. The triboelectric charge tunneling phenomenon in two-dimensional materials is expected to be applied in the fields of new two-dimensional electronic devices and reconfigurable functional circuits.展开更多
This paper presents a new 3D mesoscopic model of ultra-high performance cement-based composite(UHPCC)to investigate its dynamic tensile behavior.In this model,the UHPCC is regarded as a two-phase material composed of ...This paper presents a new 3D mesoscopic model of ultra-high performance cement-based composite(UHPCC)to investigate its dynamic tensile behavior.In this model,the UHPCC is regarded as a two-phase material composed of cementitious matrix and randomly distributed fibers.The model is established using the commercial software LS-DYNA and involves generating the randomly distributed fiber elements with considerations of diameter,length,orientation and volume fraction,and then fully constraining them with the matrix.In particular,to capture the slipping effect between fibers and matrix that has a strong influence on the dynamic tensile behavior,the fibers are modelled by a fictitious material represented by the load-slip relation.The strain-rate effect of slipping force neglected in most of previous studies is considered by calibrating constitutive parameters of the fictitious material under different strain-rates based on the single fiber pullout tests.Finally,the 3D mesoscopic model is validated against three sets of tension-dominated experiments covered a wide range of loading intensity.Numerical predictions demonstrate that strain-rate effect of slipping force must be considered,and the neglect of it may lead to a great underestimation of the dynamic tensile strength of UHPCC material and would unavoidably underestimate the blast resistance of UHPCC components.展开更多
Since the high penetration of renewable energy complicates the dynamic characteristics of the AC power electronic system(ACPES),it is essential to establish an accurate dynamic model to obtain its dynamic behavior for...Since the high penetration of renewable energy complicates the dynamic characteristics of the AC power electronic system(ACPES),it is essential to establish an accurate dynamic model to obtain its dynamic behavior for ensure the safe and stable operation of the system.However,due to the no or limited internal control details,the state-space modeling method cannot be realized.It leads to the ACPES system becoming a black-box dynamic system.The dynamic modeling method based on deep neural network can simulate the dynamic behavior using port data without obtaining internal control details.However,deep neural network modeling methods are rarely systematically evaluated.In practice,the construction of neural network faces the selection of massive data and various network structure parameters.However,different sample distributions make the trained network performance quite different.Different network structure hyperparameters also mean different convergence time.Due to the lack of systematic evaluation and targeted suggestions,neural network modeling with high precision and high training speed cannot be realized quickly and conveniently in practical engineering applications.To fill this gap,this paper systematically evaluates the deep neural network from sample distribution and structural hyperparameter selection.The influence on modeling accuracy is analyzed in detail,then some modeling suggestions are presented.Simulation results under multiple operating points verify the effectiveness of the proposed method.展开更多
The single-layer latticed cylindrical shell is one of the most widely adopted space-fl'amed structures.In this paper,free vibration properties and dynamic response to horizontal and vertical seismic waves of singl...The single-layer latticed cylindrical shell is one of the most widely adopted space-fl'amed structures.In this paper,free vibration properties and dynamic response to horizontal and vertical seismic waves of single-layer latticed cylindrical shells are analyzed by the finite element method using ANSYS software.In the numerical study,where hundreds of cases were analyzed,the parameters considered included rise-span ratio,length-span ratio,surface load and member section size.Moreover,to better define the actual behavior of single-layer latticed shells,the study is focused on the dynamic stress response to both axial forces and bending moments.Based on the numerical results,the effects of the parameters considered on the stresses are discussed and a modified seismic force coefficient method is suggested.In addition,some advice based on these research results is presented to help in the future design of such structures.展开更多
To identify the unstable individuals of networks is of great importance for information mining and security management.Exploring a broad range of steady-state dynamical processes including biochemical dynamics,epidemi...To identify the unstable individuals of networks is of great importance for information mining and security management.Exploring a broad range of steady-state dynamical processes including biochemical dynamics,epidemic processes,birth-death processes and regulatory dynamics,we propose a new index from the microscopic perspective to measure the stability of network nodes based on the local correlation matrix.The proposed index describes the stability of each node based on the activity change of the node after its neighbor is disturbed.Simulation and comparison results show our index can identify the most unstable nodes in the network with various dynamical behaviors,which would actually create a richer way and a novel insight of exploring the problem of network controlling and optimization.展开更多
Torsional vibration generally causes serious instability and damage problems in many rotating machinery parts. The global dynamic characteristic of nonlinear torsional vibration system with nonlinear rigidity and nonl...Torsional vibration generally causes serious instability and damage problems in many rotating machinery parts. The global dynamic characteristic of nonlinear torsional vibration system with nonlinear rigidity and nonlinear friction force is investigated. On the basis of the generalized dissipation Lagrange's equation, the dynamics equation of nonlinear torsional vibration system is deduced. The bifurcation and chaotic motion in the system subjected to an external harmonic excitation is studied by theoretical analysis and numerical simulation. The stability of unperturbed system is analyzed by using the stability theory of equilibrium positions of Hamiltonian systems. The criterion of existence of chaos phenomena under a periodic perturbation is given by means of Melnikov's method. It is shown that the existence of homoclinic and heteroclinic orbits in the unperturbed system implies chaos arising from breaking of homoclinic or heteroclinic orbits under perturbation. The validity of the result is checked numerically. Periodic doubling bifurcation route to chaos, quasi-periodic route to chaos, intermittency route to chaos are found to occur due to the amplitude varying in some range. The evolution of system dynamic responses is demonstrated in detail by Poincare maps and bifurcation diagrams when the system undergoes a sequence of periodic doubling or quasi-periodic bifurcations to chaos. The conclusion can provide reference for deeply researching the dynamic behavior of mechanical drive systems.展开更多
Dynamic rheological characteristics of polypropylene (PP) filled with ultra-fine full-vulcanized powdered rubber (UFPR) composed of styrene-butadiene copolymer were studied through dynamic rheological measurements on ...Dynamic rheological characteristics of polypropylene (PP) filled with ultra-fine full-vulcanized powdered rubber (UFPR) composed of styrene-butadiene copolymer were studied through dynamic rheological measurements on an Advanced Rheometric Expansion System (ARES). A specific viscoelastic phenomenon, i.e. 'the second plateau', appeared at low frequencies, and exhibits a certain dependence on the amount of rubber particles and the dispersion state in the matrix. This phenomenon is attributed to the formation of aggregation structure of rubber particles. The analyses of Cole-Cole diagrams of the dynamic viscoelastic functions suggest that the heterogeneity of the composites is enhanced on increasing both particle content and temperature.展开更多
The radial symmetric motion problem was examined for a spherical shell composed of a class of imperfect incompressible hyper-elastic materials, in which the materials may be viewed as the homogeneous incompressible is...The radial symmetric motion problem was examined for a spherical shell composed of a class of imperfect incompressible hyper-elastic materials, in which the materials may be viewed as the homogeneous incompressible isotropic neo-Hookean material with radial perturbations. A second-order nonlinear ordinary differential equation that describes the radial motion of the inner surface of the shell was obtained. And the first integral of the equation was then carded out. Via analyzing the dynamical properties of the solution of the differential equation, the effects of the prescribed imperfection parameter of the material and the ratio of the inner and the outer radii of the underformed shell on the motion of the inner surface of the shell were discussed, and the corresponding numerical examples were carded out simultaneously. In particular, for some given parameters, it was proved that, there exists a positive critical value, and the motion of the inner surface with respect to time will present a nonlinear periodic oscillation as the difference between the inner and the outer presses does not exceed the critical value. However, as the difference exceeds the critical value, the motion of the inner surface with respect to time will increase infinitely. That is to say, the shell will be destroyed ultimately.展开更多
Single and multiple dynamic impacts tests were conducted on ultra-high performance cementitious composite (UHPCC) with various volume fractions of steel fibers (0, 1%, 2%, 3%, 4%) by using the split hopkinson pres...Single and multiple dynamic impacts tests were conducted on ultra-high performance cementitious composite (UHPCC) with various volume fractions of steel fibers (0, 1%, 2%, 3%, 4%) by using the split hopkinson pressure bar (SHPB). Besides, the ultrasonic velocity method was used to test the damage on specimens caused by dynamic impacts. For single dynamic impact, the data suggest that UHPCC obviously presents dynamic strength enhancement. With increasing of strain rate, the peak stress and peak strain increase rapidly. For multiple dynamic impacts, the results show that addition of steel fibers can obviously enhance the properties of UHPCC to resist the repeated dynamic impacts. Firstly, the number of impacts sharply increases with the increasing of volume fraction of steel fibers. Secondly, the energy absorption ability linearly increases with addition of steel fibers. Thirdly, the steel fibers can prevent the disruption phenomenon and maintain the integrity of specimen.展开更多
基金financially supported by the National Natural Science Foundation of China(Grant No.51679167 and 51979193)
文摘The marine risers are often subjected to parametric excitations from the fluctuation top tension. The top tension on the riser may fluctuate with multiple frequencies caused by irregular waves. In this paper, the influence between different frequency components in the top tension on the riser system is theoretically simulated and analyzed. With the Euler-Bernoulli beam theory, a dynamic model for the vibrations of the riser is established. The top tension is set as fluctuating with time and it has two different frequencies. The influences from the fluctuation amplitudes, circular frequencies and phase angles of these frequency components on the riser system are analyzed in detail. When these two frequencies are fluctuating in the stable regions, the riser system may become unstable because ω1+ω2≈2Ωn. The fluctuation amplitudes of these frequencies have little effect on the components of the vibration frequencies of the riser. For different phase angles, the stability and dynamic behaviors of the riser would be different.
基金Supported by the National Key Research and Development Program of China under Grant No 2016YFA0301503the National Natural Science Foundation of China under Grant Nos 11674358 and 11434015the Instrument Project of the Chinese Academy of Sciences under Grant No YJKYYQ20170025
文摘We experimentally observe the dynamic evolution of atoms in the evaporative cooling, by in-situ imaging the plugged hole of ultracold atoms. Ultracold rubidium atoms confined in a magnetic trap are plugged using a blue-detuned laser beam with a waist of 20 m at a wavelength of 767 nm. We probe the variation of the atomic temperature and width versus the radio frequency in the evaporative cooling. Both the behaviors are in good agreement with the calculation of the trapping potential dressed by the rf signal above the threshold temperature,while deviating from the calculation near the phase transition. To accurately obtain the atomic width, we use the plugged hole as the reference to optimize the optical imaging system by precisely minimizing the artificial structures due to the defocus effect.
基金supported by the National Natural Science Foundation of China(Nos.51839009 and 52027814)the Natural Science Foundation of Hubei Province(No.2023AFB589).
文摘High-energy gas fracturing of shale is a novel,high efficacy and eco-friendly mining technique,which is a typical dynamic perturbing behavior.To effectively extract shale gas,it is important to understand the dynamic mechanical properties of shale.Dynamic experiments on shale subjected to true triaxial compression at different strain rates are first conducted in this research.The dynamic stress-strain curves,peak strain,peak stress and failure modes of shale are investigated.The results of the study indicate that the intermediate principal stress and the minor principal stress have the significant influence on the dynamic mechanical behaviors,although this effect decreases as the strain rate increases.The characteristics of compression-shear failure primarily occur in shale subjected to triaxial compression at high strain rates,which distinguishes it from the fragmentation characteristics observed in shale under dynamic uniaxial compression.Additionally,a numerical three-dimensional Split Hopkinson Pressure Bar(3D-SHPB),which is established by coupling PFC3D and FLAC3D methods,is validated to replicate the laboratory characteristics of shale.The dynamic mechanical characteristics of shale subjected to different confining stresses are systematically investigated by the coupling PFC3D and FLAC3D method.The numerical results are in good agreement with the experimental data.
基金supported by the Project of the Fundamental Research Funds for the Central Universities of China(2022JBMC034)the National Natural Science Foundation of China under Grant No.12275017Beijing Laboratory of National Economic Security Early-warning Engineering,Beijing Jiaotong University
文摘In this paper,we propose a combined form of the bilinear Kadomtsev-Petviashvili equation and the bilinear extended(2+1)-dimensional shallow water wave equation,which is linked with a novel(2+1)-dimensional nonlinear model.This model might be applied to describe the evolution of nonlinear waves in the ocean.Under the effect of a novel combination of nonlinearity and dispersion terms,two cases of lump solutions to the(2+1)-dimensional nonlinear model are derived by searching for the quadratic function solutions to the bilinear form.Moreover,the one-lump-multi-stripe solutions are constructed by the test function combining quadratic functions and multiple exponential functions.The one-lump-multi-soliton solutions are derived by the test function combining quadratic functions and multiple hyperbolic cosine functions.Dynamic behaviors of the lump solutions and mixed solutions are analyzed via numerical simulation.The result is of importance to provide efficient expressions to model nonlinear waves and explain some interaction mechanism of nonlinear waves in physics.
基金the National High Technology Research and Development Program (863) of China(No. 2008AA092301-1)the National Natural Science Foundation of China(No. 50909061)the Ph.D. Programs Foundation of Ministry of Education of China(No. 20070248103)
文摘This paper presents a numerical analysis of the dynamic transient behaviors of undersea cables.In this numerical study,the governing equations based on Euler-Bernoulli beam theory are adopted,and they can satisfy many applications no matter what the magnitude of the cable tension is.The nonlinear coupled equations are solved by a popular central finite difference method,and the numerical results of transient behaviors are presented when several kinds of surrounding conditions,such as different towing speeds of surface vessel,different currents and waves with various frequencies and amplitudes,are exerted.Then a detailed comparison of the results,including the upper end tension and cable shape in time-domain,is made under the above external excitations,and finally the possible reasons for these are further explained.
基金supported by the Fundamental Research Funds for the Central Universities (No. 2012ZZ0059)the National Natural Science Foundation of China (No. E51375173)+1 种基金the Open Fund of State Key Laboratory of Materials Processing and Die & Mould Technology (No. 2011-P02)a project of Shandong Province Higher Educational Science and Technology Program (No. J12LA16)
文摘Based on the Magneto-Hydro-Dynamic(MHD) theory, a united three-dimensional(3D) transient numerical model is developed to investigate the dynamic behaviors of arc plasma for a magnesium alloy AZ61A gas tungsten arc welding(GTAW) arc. The arc, electrode and workpiece are integrated into one calculation domain to avoid both presumed distribution of the current density at the electrode tip and the assumption of constant conditions of interface between welding arc and workpiece. The distributions of electric potential, current density, magnetic flux density, electromagnetic force, velocity, temperature, and pressure of the arc plasma in the 3D space are analyzed by using the numerical model. Results indicate that the maximum gradient of the electric potential in the whole arc space exists around the electrode tip, where the electric current density, electromagnetic force, and temperature are also the maximum. However, maximum pressure is found at the velocity stagnation, which is above the workpiece.Comparison between predicted temperature and measured one in arc region shows a good agreement.
基金The authors are grateful for the financial support given by the National Natural Science Foundation of China (Grant Nos. 51405043 and 51575060) and the Innovation Project of the City of Chongqing (Grant Nos. cstc2015zdcy-ztzx70010 and cstc2015zdcy-ztzx70012).
文摘The reliability and service life of wind turbines are influenced by the complex loading applied on the hub, especially amidst a poor external wind environment. A three-point elastic support, which includes the main bearing and two torque arms, was considered in this study. Based on the flexibilities of the planet carrier and the housing, a coupled dynamic model was developed for a wind turbine drive train. Then, the dynamic behaviors of the drive train for different elastic support parameters were computed and analyzed. Frequency response functions were used to examine how different elastic support parameters influence the dynamic behaviors of the drive train. Results showed that the elastic support parameters considerably influenced the dynamic behaviors of the wind turbine drive train. A large support stiffness of the torque arms decreased the dynamic response of the planet carrier and the main bearing, whereas a large support stiffness of the main bearing decreased the dynamic response of planet carrier while increasing that of the main bearing. The findings of this study provide the foundation for optimizing the elastic support stiffness of the wind turbine drive train.
基金Supported by the Youth Science Fundation of Chinese Academia SinicaYouth Fundation of Lanzhou Unviersity
文摘This paper is a further study of reference [1]. In this paper, we mainly discuss the complicated dynamical behaviors resulting from a simple one-dimensional model of nonlinear ecosystems: fixed point motion, periodic motion and chaotic motion etc., and briefly discuss the universality of the complicated dynamical behaviors, which can be described by the first and the second M. Feigenbaun. constants. At last, we discuss the 'one-side lowering phenomenon' due to near unstabilization when the nonlinear ecosystem approaches bifurcation points from unbifurcation side. It is of important theoretical and practical meanings both in the development and utilization of ecological resources ar.d in the design and management of artifilial ecosystems.
基金supported by the National Natural Science Foundation of China (Grant No.11461022)。
文摘The Schamel–Korteweg–de Vries equation is investigated by the approach of dynamics.The existences of solitary wave including ω-shape solitary wave and periodic wave are proved via investigating the dynamical behaviors with phase space analyses.The sufficient conditions to guarantee the existences of the above solutions in different regions of the parametric space are given.All possible exact explicit parametric representations of the waves are also presented.Along with the details of the analyses,the analytical results are numerically simulated lastly.
文摘The dynamic mechanical behaviors of as-cast 1Cr25Ni20Si2 austenite stainless steel during hot deformation for been studied using Gleeble-1500 hot working simulator.The hot deformation equation, the deformation activation energy, the criterion of occurring dynamic recrystallization and the relationship between peak strain and peak stress have been resulted through the experiments.
基金Project supported by the National Natural Science Foundation of China(Grant No.11701191)Subsidized Project for Cultivating Postgraduates’ Innovative Ability in Scientific Research of Huaqiao University,China
文摘We study dynamical behaviors of traveling wave solutions to a Fujimoto-Watanabe equation using the method of dynamical systems. We obtain all possible bifurcations of phase portraits of the system in different regions of the threedimensional parameter space. Then we show the required conditions to guarantee the existence of traveling wave solutions including solitary wave solutions, periodic wave solutions, kink-like(antikink-like) wave solutions, and compactons. Moreover, we present exact expressions and simulations of these traveling wave solutions. The dynamical behaviors of these new traveling wave solutions will greatly enrich the previews results and further help us understand the physical structures and analyze the propagation of nonlinear waves.
基金supported by the National Key Research and Development Program of China (No.2018YFA0703500)the National Natural Science Foundation of China(Nos.52232006,52188101,52102153,52072029,51991340,and 51991342)+2 种基金the Overseas Expertise Introduction Projects for Discipline Innovation (No.B14003)the China Postdoctoral Science Foundation (No.2021M700379)the Fundamental Research Funds for Central Universities(No.FRF-TP-18-001C1)。
文摘Although the research history of triboelectrification has been more than 2000 years, there are still many problems to be solved so far.The use of scanning probe microscopy provides an important way to quantitatively study the transfer, accumulation, and dissipation of triboelectric charges in the process of triboelectrification. Two-dimensional materials are considered to be key materials for new electronic devices in the post-Moore era due to their atomic-scale size advantages. If the electrostatic field generated by triboelectrification can be used to replace the traditional gate electrostatic field, it is expected to simplify the structure of two-dimensional electronic devices and reconfigure them at any time according to actual needs. Here, we investigate the triboelectrification process of various two-dimensional materials such as MoS_(2), WSe_(2),and ZnO. Different from traditional bulk materials, after two-dimensional materials are rubbed, the triboelectric charges generated may tunnel through the two-dimensional materials to the underlying substrate surface. Because the tunneling triboelectric charge is protected by the twodimensional material, its stable residence time on the substrate surface can reach more than 7 days, which is more than tens of minutes for the traditional triboelectric charge. In addition, the electrostatic field generated by the tunneling triboelectric charge can effectively regulate the carrier transport performance of two-dimensional materials, and the source–drain current of the field effect device regulated by the triboelectric floating gate is increased by nearly 60 times. The triboelectric charge tunneling phenomenon in two-dimensional materials is expected to be applied in the fields of new two-dimensional electronic devices and reconfigurable functional circuits.
基金supported by the National Natural Science Foundations of China(No.52178515,No.51808550 and No.51738011).
文摘This paper presents a new 3D mesoscopic model of ultra-high performance cement-based composite(UHPCC)to investigate its dynamic tensile behavior.In this model,the UHPCC is regarded as a two-phase material composed of cementitious matrix and randomly distributed fibers.The model is established using the commercial software LS-DYNA and involves generating the randomly distributed fiber elements with considerations of diameter,length,orientation and volume fraction,and then fully constraining them with the matrix.In particular,to capture the slipping effect between fibers and matrix that has a strong influence on the dynamic tensile behavior,the fibers are modelled by a fictitious material represented by the load-slip relation.The strain-rate effect of slipping force neglected in most of previous studies is considered by calibrating constitutive parameters of the fictitious material under different strain-rates based on the single fiber pullout tests.Finally,the 3D mesoscopic model is validated against three sets of tension-dominated experiments covered a wide range of loading intensity.Numerical predictions demonstrate that strain-rate effect of slipping force must be considered,and the neglect of it may lead to a great underestimation of the dynamic tensile strength of UHPCC material and would unavoidably underestimate the blast resistance of UHPCC components.
基金supported in part by the Science Search Foundation of Liaoning Educational Department。
文摘Since the high penetration of renewable energy complicates the dynamic characteristics of the AC power electronic system(ACPES),it is essential to establish an accurate dynamic model to obtain its dynamic behavior for ensure the safe and stable operation of the system.However,due to the no or limited internal control details,the state-space modeling method cannot be realized.It leads to the ACPES system becoming a black-box dynamic system.The dynamic modeling method based on deep neural network can simulate the dynamic behavior using port data without obtaining internal control details.However,deep neural network modeling methods are rarely systematically evaluated.In practice,the construction of neural network faces the selection of massive data and various network structure parameters.However,different sample distributions make the trained network performance quite different.Different network structure hyperparameters also mean different convergence time.Due to the lack of systematic evaluation and targeted suggestions,neural network modeling with high precision and high training speed cannot be realized quickly and conveniently in practical engineering applications.To fill this gap,this paper systematically evaluates the deep neural network from sample distribution and structural hyperparameter selection.The influence on modeling accuracy is analyzed in detail,then some modeling suggestions are presented.Simulation results under multiple operating points verify the effectiveness of the proposed method.
基金National Natural Science Foundation of China,Grant No.59895410
文摘The single-layer latticed cylindrical shell is one of the most widely adopted space-fl'amed structures.In this paper,free vibration properties and dynamic response to horizontal and vertical seismic waves of single-layer latticed cylindrical shells are analyzed by the finite element method using ANSYS software.In the numerical study,where hundreds of cases were analyzed,the parameters considered included rise-span ratio,length-span ratio,surface load and member section size.Moreover,to better define the actual behavior of single-layer latticed shells,the study is focused on the dynamic stress response to both axial forces and bending moments.Based on the numerical results,the effects of the parameters considered on the stresses are discussed and a modified seismic force coefficient method is suggested.In addition,some advice based on these research results is presented to help in the future design of such structures.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.72071153 and 71771186)Key Laboratory of Science and Technology on Integrated Logistics Support(Grant Nos.6142003190102)+1 种基金the Natural Science Foundation of Shaanxi Province,China(Grant Nos.2020JM-486)the China Postdoctoral Science Foundation(Grant No.2017M613336).
文摘To identify the unstable individuals of networks is of great importance for information mining and security management.Exploring a broad range of steady-state dynamical processes including biochemical dynamics,epidemic processes,birth-death processes and regulatory dynamics,we propose a new index from the microscopic perspective to measure the stability of network nodes based on the local correlation matrix.The proposed index describes the stability of each node based on the activity change of the node after its neighbor is disturbed.Simulation and comparison results show our index can identify the most unstable nodes in the network with various dynamical behaviors,which would actually create a richer way and a novel insight of exploring the problem of network controlling and optimization.
基金supported by National Key Technologies R&D Program of the 10th Five-year Plan of China (Grant No. ZZ02-13B-02-03-1)Hebei Provincial Natural Science Foundation of China (Grant No. F2008000882)Hebei Provincial Education Office Scientific Research Projects of China (Grant No. ZH2007102, 2007496)
文摘Torsional vibration generally causes serious instability and damage problems in many rotating machinery parts. The global dynamic characteristic of nonlinear torsional vibration system with nonlinear rigidity and nonlinear friction force is investigated. On the basis of the generalized dissipation Lagrange's equation, the dynamics equation of nonlinear torsional vibration system is deduced. The bifurcation and chaotic motion in the system subjected to an external harmonic excitation is studied by theoretical analysis and numerical simulation. The stability of unperturbed system is analyzed by using the stability theory of equilibrium positions of Hamiltonian systems. The criterion of existence of chaos phenomena under a periodic perturbation is given by means of Melnikov's method. It is shown that the existence of homoclinic and heteroclinic orbits in the unperturbed system implies chaos arising from breaking of homoclinic or heteroclinic orbits under perturbation. The validity of the result is checked numerically. Periodic doubling bifurcation route to chaos, quasi-periodic route to chaos, intermittency route to chaos are found to occur due to the amplitude varying in some range. The evolution of system dynamic responses is demonstrated in detail by Poincare maps and bifurcation diagrams when the system undergoes a sequence of periodic doubling or quasi-periodic bifurcations to chaos. The conclusion can provide reference for deeply researching the dynamic behavior of mechanical drive systems.
基金This work was supported by the National Science Fund for Distinguished Young Scholars of China (No.50125312) andSpecial Funds for Major State Basic Research Projects (No.G1999064800).
文摘Dynamic rheological characteristics of polypropylene (PP) filled with ultra-fine full-vulcanized powdered rubber (UFPR) composed of styrene-butadiene copolymer were studied through dynamic rheological measurements on an Advanced Rheometric Expansion System (ARES). A specific viscoelastic phenomenon, i.e. 'the second plateau', appeared at low frequencies, and exhibits a certain dependence on the amount of rubber particles and the dispersion state in the matrix. This phenomenon is attributed to the formation of aggregation structure of rubber particles. The analyses of Cole-Cole diagrams of the dynamic viscoelastic functions suggest that the heterogeneity of the composites is enhanced on increasing both particle content and temperature.
基金国家自然科学基金,Municipal Key Subject Program of Shanghai
文摘The radial symmetric motion problem was examined for a spherical shell composed of a class of imperfect incompressible hyper-elastic materials, in which the materials may be viewed as the homogeneous incompressible isotropic neo-Hookean material with radial perturbations. A second-order nonlinear ordinary differential equation that describes the radial motion of the inner surface of the shell was obtained. And the first integral of the equation was then carded out. Via analyzing the dynamical properties of the solution of the differential equation, the effects of the prescribed imperfection parameter of the material and the ratio of the inner and the outer radii of the underformed shell on the motion of the inner surface of the shell were discussed, and the corresponding numerical examples were carded out simultaneously. In particular, for some given parameters, it was proved that, there exists a positive critical value, and the motion of the inner surface with respect to time will present a nonlinear periodic oscillation as the difference between the inner and the outer presses does not exceed the critical value. However, as the difference exceeds the critical value, the motion of the inner surface with respect to time will increase infinitely. That is to say, the shell will be destroyed ultimately.
基金Funded by the National Natural Science Foundation of China(51178106)the Doctoral Program of Higher Education of China(20100092110029)the Key Laboratory of Urban and Architectural Heritage Conservation,Ministry of Education,Southeast University
文摘Single and multiple dynamic impacts tests were conducted on ultra-high performance cementitious composite (UHPCC) with various volume fractions of steel fibers (0, 1%, 2%, 3%, 4%) by using the split hopkinson pressure bar (SHPB). Besides, the ultrasonic velocity method was used to test the damage on specimens caused by dynamic impacts. For single dynamic impact, the data suggest that UHPCC obviously presents dynamic strength enhancement. With increasing of strain rate, the peak stress and peak strain increase rapidly. For multiple dynamic impacts, the results show that addition of steel fibers can obviously enhance the properties of UHPCC to resist the repeated dynamic impacts. Firstly, the number of impacts sharply increases with the increasing of volume fraction of steel fibers. Secondly, the energy absorption ability linearly increases with addition of steel fibers. Thirdly, the steel fibers can prevent the disruption phenomenon and maintain the integrity of specimen.