Predicting the Growth of Ash Deposits in Drop Tube Furnace Using Dynamic Mesh Technique

Modeling and experiments of the growth of ash deposits during the combustion in a drop tube furnace are presented in this paper.An existing deposition model for ash deposit was used,which involves relationship among the force of gravity,elastic rebound and adhesion forces acting at the moment of ash particle impaction.Important parameters of this model were determined by the experimental data.The influence of particle size and velocity on deposit geometry was investigated.The growth of ash deposits involving various inlet velocities,tube diameters and tube arrangements were simulated with dynamic mesh technique in Fluent.The simulation results show that particle normal impacted velocity plays an important role due to elastic bounce force term.Deposited geometry was influenced by side velocity(velocity of inlet⁃2),and large velocity has an obvious effect to change the shape of deposition and postpone the steady time.

Numerical Investigation of the Aerodynamic Performance Affected by Spiral Inlet and Outlet in a Positive Displacement Blower

The flow in the positive displacement blower is very complex.The existing two-dimensional numerical simulation cannot provide the detailed flow information,especially flow characteristics along the axial direction,which is unfavorable to improve the performance of positive displacement blower.To investigate the effects of spiral inlet and outlet on the aerodynamic performance of positive displacement blower,three-dimensional unsteady flow characteristics in a three-lobe positive displacement blower with and without the spiral inlet and outlet are simulated by solving Navier-Stokes equations coupled with RNG k-ε turbulent model.In the numerical simulation,the dynamic mesh technique and overset mesh updating method are used.The computational results are compared with the experimental measurements on the variation of flow rate with the outlet pressure to verify the validity of the numerical method presented.The results show that the mass flow rate with the change of pressure is slightly affected by the application of spiral inlet and outlet,but the internal flow state is largely affected.In the exhaust region,the fluctuations of pressure,velocity and temperature as well as the average values of velocity are significantly reduced.This illustrates that the spiral outlet can effectively suppress the fluctuations of pressure,thus reducing reflux shock and energy dissipation.In the intake area,the average value of pressure,velocity and temperature are slightly declined,but the fluctuations of them are significantly reduced,indicating that the spiral inlet plays the role in making the flow more stable.The numerical results obtained reveal the three-dimensional flow characteristics of the positive displacement blower with spiral inlet and outlet,and provide useful reference to improve performance and empirical correction in the noise-reduction design of the positive displacement blowers.

Numerical Simulation of PMM Tests for A Ship in Close Proximity to Sidewall and Maneuvering Stability Analysis

As the maneuverability of a ship navigating close to a bank is influenced by the sidewall, the assessment of ship maneuvering stability is important. The hydrodynamic derivatives measured by the planar motion mechanism （PMM） test provide a way to predict the change of ship maneuverability. This paper presents a numerical simulation of PMM model tests with variant distances to a vertical bank by using unsteady RANS equations. A hybrid dynamic mesh technique is developed to realize the mesh configuration and remeshing of dynamic PMM tests when the ship is close to the bank. The proposed method is validated by comparing numerical results with results of PMM tests in a circulating water channel. The first-order hydrodynamic derivatives of the ship are analyzed from the time history of lateral force and yaw moment according to the multiple-run simulating procedure and the variations of hydrodynamic derivatives with the ship-sidewall distance are given. The straight line stability and directional stability are also discussed and stable or unstable zone of proportional-derivative （PD） controller parameters for directional stability is shown, which can be a reference for course keeping operation when sailing near a bank.

Unsteady Flow Simulations in a Three-lobe Positive Displacement Blower

To improve the performance of the positive displacement blower, it is imperative to understand the detailed internal flow characteristics or enable a visualization of flow status. However, the existing two-dimensional unsteady, three-dimensional steady or quasi-unsteady numerical simulation and theoretical analysis cannot provide the detailed flow information, which is unfavorable to improve the performance of positive displacement blower. Therefore, the unsteady flow characteristics in a three-lobe positive displacement blower are numerically investigated by solving the three-dimensional, unsteady, compressible Navier-Stokes equations coupled with RNG k-e turbulent model. In the numerical simulation, the dynamic mesh technique and overset mesh updating method are adopted. Due to the air being compressed in the process of the rotors rotating, the variation of the temperature field in the positive displacement blower is considered. By comparing the experimental measurements and the numerical results on the variation of flow rate with the outlet pressure, the maximum relative error of the flow rate is less than 2.15% even at the maximum outlet pressure condition, which means that the calculation model and numerical computational method used are effective. The numerical results show that in the intake region, the fluctuations of the inlet flow are greatly affected by the direction of the velocity vectors. In the exhaust region, the temperature changes significantly, which leads to the increase of the airflow pulsation. Through analysis on the velocity, pressure and temperature fields obtained from the numerical simulations, three-dimensional unsteady flow characteristics in the positive displacement blower are revealed. The studied results will provide useful reference for improving the performance and empirical correction in the design of the positive displacement blower.

THE TRANSIENT AERODYNAMIC CHARACTERISTICS AROUND VANS RUNNING INTO A ROAD TUNNEL

In this article,the processes of vans running into a one-way two-lane road tunnel are simulated numerically using the dynamic mesh technique and RNG k ？ ε turbulence model.The transient aerodynamic characteristics around vans are obtained in three cases：a single van,two vans side-by-side and two vans one after another running into the tunnel,respectively.Through a comparison with the results of the wind tunnel experiment,the transient simulation method is verified.The results show that,when a van runs into the tunnel,the aerodynamic drag coefficient increases near the tunnel entrance,and after entering the tunnel,the side force is generated,pointing to the tunnel wall nearer to the van.When two vans run into the tunnel side-by-side,their drag coefficients increase by 50%,and the side force varies sharply with directions changing twice near the tunnel entrance.When two vans run into tunnel one after another,the aerodynamic characteristics around the van in the front is similar to that of a single van,but the aerodynamic forces on the van behind do not have obvious change.Among the three cases,the aerodynamic forces have a sharp change when two vans run side-by-side,so driving side-by-side into a tunnel should be avoided for safety.