Optimal Operation with Dynamic Partitioning Strategy for Centralized Shared Energy Storage Station with Integration of Large-scale Renewable Energy

As renewable energy continues to be integrated into the grid,energy storage has become a vital technique supporting power system development.To effectively promote the efficiency and economics of energy storage,centralized shared energy storage(SES)station with multiple energy storage batteries is developed to enable energy trading among a group of entities.In this paper,we propose the optimal operation with dynamic partitioning strategy for the centralized SES station,considering the day-ahead demands of large-scale renewable energy power plants.We implement a multi-entity cooperative optimization operation model based on Nash bargaining theory.This model is decomposed into two subproblems:the operation profit maximization problem with energy trading and the leasing payment bargaining problem.The distributed alternating direction multiplier method(ADMM)is employed to address the subproblems separately.Simulations reveal that the optimal operation with a dynamic partitioning strategy improves the tracking of planned output of renewable energy entities,enhances the actual utilization rate of energy storage,and increases the profits of each participating entity.The results confirm the practicality and effectiveness of the strategy.

Dynamic cache partitioning based on hot page migration

Static cache partitioning can reduce inter- application cache interference and improve the composite performance of a cache-polluted application and a cache- sensitive application when they run on cores that share the last level cache in the same multi-core processor. In a virtu- alized system, since different applications might run on dif- ferent virtual machines （VMs） in different time, it is inappli- cable to partition the cache statically in advance. This paper proposes a dynamic cache partitioning scheme that makes use of hot page detection and page migration to improve the com- posite performance of co-hosted virtual machines dynami- cally according to prior knowledge of cache-sensitive appli- cations. Experimental results show that the overhead of our page migration scheme is low, while in most cases, the com- posite performance is an improvement over free composition.

Reversible Data Hiding Based on Pixel-Value-Ordering and Pixel Block Merging Strategy

With the reversible data hiding method based on pixel-value-ordering,data are embedded through the modification of the maximum and minimum values of a block.A significant relationship exists between the embedding performance and the block size.Traditional pixel-value-ordering methods utilize pixel blocks with a fixed size to embed data;the smaller the pixel blocks,greater is the embedding capacity.However,it tends to result in the deterioration of the quality of the marked image.Herein,a novel reversible data hiding method is proposed by incorporating a block merging strategy into Li et al.’s pixel-value-ordering method,which realizes the dynamic control of block size by considering the image texture.First,the cover image is divided into non-overlapping 2×2 pixel blocks.Subsequently,according to their complexity,similarity and thresholds,these blocks are employed for data embedding through the pixel-value-ordering method directly or after being emerged into 2×4,4×2,or 4×4 sized blocks.Hence,smaller blocks can be used in the smooth region to create a high embedding capacity and larger blocks in the texture region to maintain a high peak signal-to-noise ratio.Experimental results prove that the proposed method is superior to the other three advanced methods.It achieves a high embedding capacity while maintaining low distortion and improves the embedding performance of the pixel-value-ordering algorithm.

一种应用于自组织网络的动态节点划分算法(英文)

A dynamic nodes partition algorithm for the Ad Hoc network is proposed. Firstly, Roam cluster method is used to cluster 926 random nodes in a square region. Subsequently, the central moving model based on the simulated annealing algorithm and the least circle overlay model is constructed to remove the network redundancy of the circle number and circle radius respectively. Simulation results show that the algorithm can effectively maintain the stability of network structure and increase balancing capabilities of Ad Hoc network load. The future work is to study how to improve the adaptability for the application in the complicated areas.

Local Hybrid Linear State Estimation for Electric Power Systems Using Stream Processing

The increasing penetration of renewable energy resources with highly fluctuating outputs has placed increasing concern on the accuracy and timeliness of electric power system state estimation(SE).Meanwhile,we note that only a fraction of system states fluctuate at the millisecond level and require to be updated.As such,refreshing only those states with significant variation would enhance the computational efficiency of SE and make fast-continuous update of states possible.However,this is difficult to achieve with conventional SE methods,which generally refresh states of the entire system every 4–5 s.In this context,we propose a local hybrid linear SE framework using stream processing,in which synchronized measurements received from phasor measurement units(PMUs),and trigger/timingmode measurements received from remote terminal units(RTUs)are used to update the associated local states.Moreover,the measurement update process efficiency and timeliness are enhanced by proposing a trigger measurement-based fast dynamic partitioning algorithm for determining the areas of the system with states requiring recalculation.In particular,non-iterative hybrid linear formulations with both RTUs and PMUs are employed to solve the local SE problem.The timeliness,accuracy,and computational efficiency of the proposed method are demonstrated by extensive simulations based on IEEE 118-,300-,and 2383-bus systems.

Decision Support System for Adaptive Restoration Control of Distribution System

Aiming at the high-dimensional uncertainties of restoration process, an optimization model for distribution system restoration control is proposed considering expected restoration benefits, expected restoration costs, and security risks of the overall restoration scheme. In the proposed model, the effect of security control on restoration process is actively analyzed considering the security control costs of preventive, emergency, and correction controls. A two-layer decision support framework for distribution system restoration decision support system(DRDSS) is also designed. The upper layer of the proposed framework generates the pre-adjustment schemes of operation mode for energized power grid by load transfer and selects the optimal pre-adjustment scheme and the corresponding partitioning scheme based on the partition adjustment results of each pre-adjustment scheme. In addition, it optimizes the spatial-temporal decision-making of the inter-partition connectivity. For each partition, the lower layer of the proposed framework pre-selects the units and loads to be restored according to the pre-evaluated restoration income, generates the table of alternative restoration scheme for coping with uncertain events through simulation and deduction, and evaluates the risk and benefit of each scheme.For the uncertain events in the actual restoration process, the current restoration scheme can be adaptively switched to a sub-optimal scheme or re-optimized if necessary. Meanwhile, the proposed framework provides an information interaction interface for collaborative restoration with the related transmission system. A 123-node test system is built to evaluate the effectiveness and adaptability of the proposed model and framework.

An Introduction to Advanced Hot-Formed Steel for Automobile

A recently developed advanced hot-formed （AHF） steel for automobile is introduced and three physical metallurgy concepts based on which the AHF steel was designed are reviewed, they are dynamic carbon partitioning （DCP）, flash copper precipitation and bake toughening. AHF steel is an upgrade of the existing hot-formed steel especially suitable for making components with superior crashworthiness; it can be processed by regular hot stamping equipment and process. A kinetics model for DCP is expressed in detail, which can be used to calculate the volume fraction of retained austenite based on four materials and processing parameters. The flash copper precipitation used as an additional strengthening mechanism for AHF steel is also discussed and its ultrafast kinetics can be attributed to the enhancement of quenched-in vacancies on copper diffusion. Also, the bake toughening of AHF steel is addressed; the mechanism of which may be related to the elimination of the less stable block-like retained austenite.

Renewable Generation Capacity and Reliability Assessments for Resilient Active Distribution Networks Based on Time-sequence Production Simulation

The penetration of renewable generation will affect the energy utilization efficiency,economic benefit and reliability of the active distribution network(ADN).This paper proposes a time-sequence production simulation(TSPS)method for re-newable generation capacity and reliability assessments in ADN considering two operational status:the normal status and the fault status.During normal operation,an optimal dispatch model is proposed to promote the renewable consumption and increase the economic benefit.When a failure occurs,the renewable generators are partitioned into islands for resilient power supply and reliability improvement.A novel dynamic island partition model is presented based on mixed integer second-order cone programming(MISOCP).The effectiveness of the proposed TSPS method is demonstrated in a standard network integrated with historical data of load and renewable generations.