Mitochondrial recruitment in myelin:an anchor for myelin dynamics and plasticity?

Optimal propagation of neuronal electrical impulses depends on the insulation of axons by myelin,produced in the central nervous system by oligodendrocytes.Myelin is an extension of the oligodendrocyte plasma membrane,which wraps around an axon to form a compact multi-layered sheath.Myelin is composed of a substantially higher proportion of lipids compared to other biological membranes and enriched in a small number of specialized proteins.

Molecular dynamics simulation on plasticity deformation mechanism and failure near void for magnesium alloy

The plastic deformation processes of magnesium alloys near a void at atomic scale level were examined through molecular dynamics(MD)simulation.The modified embedded atom method(MEAM)potentials were employed to characterize the interaction between atoms of the magnesium alloy specimen with only a void.The void growth and crystal failure processes for hexagonal close-packed(hcp)structure were observed.The calculating results reveal that the deformation mechanism near a void in magnesium alloy is a complex process.The passivation around the void,dislocation emission,and coalescence of the void and micro-cavities lead to rapid void growth.

Anisotropic plasticity of nanocrystalline Ti:A molecular dynamics simulation

Using molecular dynamics simulations,the plastic deformation behavior of nanocrytalline Ti has been investigated under tension and compression normal to the{0001},{1010},and{1210}planes.The results indicate that the plastic deformation strongly depends on crystal orientation and loading directions.Under tension normal to basal plane,the deformation mechanism is mainly the grain reorientation and the subsequent deformation twinning.Under compression,the transformation of hexagonal-close packed(HCP)-Ti to face-centered cubic(FCC)-Ti dominates the deformation.When loading is normal to the prismatic planes(both{1010}and{1210}),the deformation mechanism is primarily the phase transformation among HCP,body-centered cubic(BCC),and FCC structures,regardless of loading mode.The orientation relations(OR)of{0001}HCP||{111}FCC and<1210>HCP||<110>FCC,and{1010}HCP||{110}FCC and<0001>HCP||<010>FCC between the HCP and FCC phases have been observed in the present work.For the transformation of HCP→BCC→HCP,the OR is{0001}α1||{110}β||{1010}α2(HCP phase before the critical strain is defined as α1-Ti,BCC phase is defined as β-Ti,and the HCP phase after the critical strain is defined as α2-Ti).Energy evolution during the various loading processes further shows the plastic anisotropy of nanocrystalline Ti is determined by the stacking order of the atoms.The results in the present work will promote the in-depth study of the plastic deformation mechanism of HCP materials.

A CONSTITUTIVE MODEL FOR CREEP-PLASTICITY INTERACTION BASED ON DISLOCATION DYNAMICS

A glide-plus-climb micromechanism of dislocation evolution with the formation of subgrains is pro- posed for modelling of the creep-plasticity interaction (CPI). The long-range internal stress can be divided into the resistance for dislocation climb in subgrain boundaries and that for dislocation glide within grains or subgrains. Their evolution equations are then derived based on dislocation dynamics. Furthermore, a unified constitutive model for CPI is developed from Orowan's formula. Theoretical calculations on the basis of this model show a very good agreement between the model prediction and experimental results of benchmark tests for 2 1/4 Cr -1 Mo steel at 600℃.

Effects of Planting Density, Duration of Disclosing Plastic Film and Nitrogen Fertilization on the Growth Dynamics of Rapeseed under No-tillage Cultivation

[ Objective] This study was to understend the optimized combination of planting density, duration of disclosing plastic film and nitrogen fertilization under no-tillage cultivation. [ Method] Quadratic polynomial regression and saturated D-optimal design were employed to investigate the effects of planting density, duration of disclosing plastic film and nitrogen fertilization on the dynamics growth of rapeseed under no-tillage cultivation.[ Result] Within the experimental range, the growth dynamics of no-tillage cultivated rapeseed assumed a rise-fall tend. For the effects to the growth dynamics of no-tillage cultivated rapeseed, nitrogen application amount was higher than planting density and duration of disclosing plastic film. The interaction effect between planting density and duration of disclosing plastic film was higher than that between nitrogen application amount and planting density, and between nitrogen application amount and duration of disclosing plastic film. [ Conclusion] The optimized combination of these factors for dynamic growth of rapeseed under no-tillage cultivation was determined to be： planting density of per hectare 154 925 individuals, duration of disclosing plastic film of 110 d, nitrogen application amount of 315 kg/hm^2.

Recent Advance in Synaptic Plasticity Modulation Techniques for Neuromorphic Applications

Manipulating the expression of synaptic plasticity of neuromorphic devices provides fascinating opportunities to develop hardware platforms for artifi-cial intelligence.However,great efforts have been devoted to exploring biomimetic mechanisms of plasticity simulation in the last few years.Recent progress in various plasticity modulation techniques has pushed the research of synaptic electronics from static plasticity simulation to dynamic plasticity modulation,improving the accuracy of neuromorphic computing and providing strategies for implementing neuromorphic sensing functions.Herein,several fascinating strategies for synap-tic plasticity modulation through chemical techniques,device structure design,and physical signal sensing are reviewed.For chemical techniques,the underly-ing mechanisms for the modification of functional materials were clarified and its effect on the expression of synaptic plasticity was also highlighted.Based on device structure design,the reconfigurable operation of neuromorphic devices was well demonstrated to achieve programmable neuromorphic functions.Besides,integrating the sensory units with neuromorphic processing circuits paved a new way to achieve human-like intelligent perception under the modulation of physical signals such as light,strain,and temperature.Finally,considering that the relevant technology is still in the basic exploration stage,some prospects or development suggestions are put forward to promote the development of neuromorphic devices.

Dynamic Plastic Analysis of Ship-Platform Collision

This paper studies intensively the problems of ship-platform collision. The ship and platform are treated as one structural system connected with spring elements and then motion equation of the collision system is established. A nonlinear force-displacement relationship is derived for the simulation of local dent in a hit member and the yield surface of a dented tubular section is developed to consider the reduction of load carrying capacity of hit members. Large deformations, plasticity and strain-hardening of the beam-column element are taken into account by combining the elastic large displacement analysis theory with the plastic node method. The effect of the hydrodynamic forces acting on the platform, the rubber fender the property of the local dent and the buckling behavior of beam-column on collision are analyzed. The numerical simulation of the nonlinear dynamic response is carried out by Wilson theta method with updated Newton-Raphson iteration. And the numerical example of the dynamic response of a offshore platform in ship-platform collision is also present.

A viscoelastic-plastic constitutive model with Mohr-Coulomb yielding criterion for sea ice dynamics

A new viscoelastic-plastic （VEP） constitutive model for sea ice dynamics was developed based on continuum mechanics. This model consists of four components： Kelvin-Vogit viscoelastic model, Mohr-Coulomb yielding criterion, associated normality flow rule for plastic rehololgy, and hydrostatic pressure. The numerical simulations for ice motion in an idealized rectangular basin were made using smoothed particle hydrodynamics （SPH） method, and compared with the analytical solution as well as those based on the modified viscous plastic（VP） model and static ice jam theory. These simulations show that the new VEP model can simulate ice dynamics accurately. The new constitutive model was further applied to simulate ice dynamics of the Bohai Sea and compared with the traditional VP, and modified VP models. The results of the VEP model are compared better with the satellite remote images, and the simulated ice conditions in the JZ20-2 oil platform area were more reasonable.

Molecular dynamics simulation on mechanisms of plastic anisotropy in nanotwinned polycrystalline copper with{111}texture during tensile deformation

Based on molecular dynamics(MD)simulation,the mechanisms of plastic anisotropy in nanotwinned polycrystalline copper with{111}texture during tensile deformation were systematically studied from the aspects of Schmid factor of the dominant slip system and the dislocation mechanism.The results show that the Schmid factor of dominated slip system is altered by changing the inclining angle of the twin boundaries(TBs),while the yield stress or flow stress does not strictly follow the Schmid law.There exist hard and soft orientations involving different dislocation mechanisms during the tensile deformation.The strengthening mechanism of hard orientation lies in the fact that there exist interactions between the dislocations and the TBs during plastic deformation,which leads to the dislocation blocking and reactions.The softening mechanism of soft orientation lies in the fact that there is no interaction between the dislocations and the TBs because only the slip systems parallel to the TBs are activated and the dislocations slip on the planes parallel to the TBs.It is concluded that the plastic anisotropy in the nanotwinned polycrystalline copper with{111}texture is aroused by the combination effect of the Schmid factor of dominated slip system and the dislocation mechanism.

Temperature effect on nanotwinned Ni under nanoindentation using molecular dynamic simulation

Temperature effect on atomic deformation of nanotwinned Ni (nt-Ni) under localized nanoindentation is investigated in comparison with nanocrystalline Ni (nc-Ni) through molecular simulation.The nt-Ni exhibits enhanced critical load and hardness compared to nc-Ni,where perfect,stair-rod and Shockley dislocations are activated at (111),(111) and (111) slip planes in nt-Ni compared to only SSockley dislocation nucleation at (111) and (111) slip planes of nc-Ni.The nt-Ni exhibits a less significant indentation size effect in comparison with nc-Ni due to the dislocation slips hindrance of the twin boundary.The atomic deformation associated with the indentation size effect is investigated during dislocation transmission.Different from the decreasing partial slips parallel to the indenter surface in nc-Ni with increasing temperature,the temperaturedependent atomic deformation of nt-Ni is closely related to the twin boundary:from the partial slips parallel to the twin boundary (~10 K),to increased confined layer slips and decreased twin migration(300 K–600 K),to decreased confined layer slips and increased dislocation interaction of dislocation pinning and dissociation (900 K–1200 K).Dislocation density and atomic structure types through quantitative analysis are implemented to further reveal the above-mentioned dislocation motion and atomic structure alteration.Our study is helpful for understanding the temperature-dependent plasticity of twin boundary in nanotwinned materials.

Anelasticity to plasticity transition in a model two-dimensional amorphous solid

Anelasticity, as an intrinsic property of amorphous solids, plays a significant role in understanding their relaxation and deformation mechanism. However, due to the lack of long-range order in amorphous solids, the structural origin of anelasticity and its distinction from plasticity remain elusive. In this work, using frozen matrix method, we study the transition from anelasticity to plasticity in a two-dimensional model glass. Three distinct mechanical behaviors, namely,elasticity, anelasticity, and plasticity, are identified with control parameters in the amorphous solid. Through the study of finite size effects on these mechanical behaviors, it is revealed that anelasticity can be distinguished from plasticity.Anelasticity serves as an intrinsic bridge connecting the elasticity and plasticity of amorphous solids. Additionally, it is observed that anelastic events are localized, while plastic events are subextensive. The transition from anelasticity to plasticity is found to resemble the entanglement of long-range interactions between element excitations. This study sheds light on the fundamental nature of anelasticity as a key property of element excitations in amorphous solids.

A Model of Dynamic Recrystallization in Alloys during High Strain Plastic Deformation

Recrystallized grains, less than 200 nm in diameter were observed in heavily shear zones of a high strength low alloy steel and a Ni-based alloy, and Also grain refinement, less than 3 μm in diameter was made in high purity aluminum by ECAE at ambient temperature. The experimental results showed that high strain rate and large deformation could induce dynamic recrystallization.Based on dislocation dynamics and grain orientation change enhanced by plastic deformation,a model for the recrystallization process is developed. The model is used to explain the ultra fine grains which are formed at a temperature still much lower than that for the conventional recrystallization

ANALYSIS OF THE LARGE DEFLECTION DYNAMIC PLASTIC RESPONSE OF SIMPLY-SUPPORTED CIRCULAR PLATES BY THE“MEMBRANE FACTOR METHOD”

Based on energy equilibrium,a new procedure called the Membrane Factor Method is devel- oped to analyze the dynamic plastic response of plates with deflections in the range where both bending mo- ments and membrane forces are important.The final deflection of a simply -supported circular rigid-plastic plate loaded by a uniformly distributed impulse is obtained.In comparison with other approximate solutions, the present results are found to be simpler and in better agreement with the corresponding experimental values reoorded by Florence.

Dynamic Buckling of Elasto-Plastic Cylindrical Shells Under Axial Fluid-Solid Impact Load

The dynamic buckling of elasto-plastic cylindrical shells under axial fluid-solid impact is investigated theoretically. A simplified liquid- gas- structure model is given to approximately imitate the problem. The basic equation of the structure is derived from a minimum principle in dynamics of elasto-plastic continua at finite deformation, and the flow theory of plasticity is employed. The liquid is incompressible and the gas is compressed adiabatically. A number of numerical results are presented and the characteristics of the buckling behavior under fluid-solid impact are illustrated.

DYNAMIC RESPONSE OF A RIGID,PERFECTLY PLASTIC FREE-FREE BEAM STRUCK BY A PROJECTILE ATANY CROSS-SECTION ALONG ITS SPAN

The rigid, perfectly plastic dynamic response of a free-free beam subjected to impact by a projectile at any cross-section is studied. The instantaneous deformations of the beam are given through an analysis of the complete solution for rigid plastic structures. The in?uence of some parameters such as the input energy and mass ratio on the plastic deformation, travelling plastic hinge position and energy partitioning of the beam are discussed.

A NOVEL METHOD FOR MEASURING AND CHARACTERIZING DYNAMIC FRACTURE-INITIATION TOUGHNESS OF ELASTIC-PLASTIC MATERIALS

The characterization and testing methods of the dynamic fractureinitiation toughness of elas- tic-plastic materials under tensileimpact are studied. By using the self-designed bar-bar tensile impactappa- ratus, a novel test method for studying dynamicfracture-initiation ahs been proposed based on the one-di- mensionaltest principle. The curve of average load v. s. displacement (P-δ)is smooth until unstable crack propagation, and the kinetic energywhich does not contribute to the crack growth can be removed fromtotal work done by external-force to the specimen.

Plastic deformation mechanism transition of Ti/Ni nanolaminate with pre-existing crack:Molecular dynamics study

Tensile behaviors of Ti/Ni nanolaminate with model-I crack are investigated by molecular dynamics simulations.The Ti/Ni nanolaminates with center crack either in Ti layer or in Ni layer under different loading directions are utilized to systematically study the mechanical performance of the cracked material.The results indicate that pre-existing crack dramatically changes the plastic deformation mechanism of the Ti/Ni nanolaminate.Unlike the initial plastic deformation originating from the interface or weak Ti layer of the crack-free samples,the plastic behavior of cracked Ti/Ni nanolaminate first occurs at the crack tip due to the local stress concentration.Subsequent plastic deformation is dominated by the interaction between the crack and interface.The Ti/Ni interface not only impedes the movement of the initial plastic deformation carriers(dislocation,slip band,and deformation twinning)from the crack tip,but also promotes the movement of interfacial dislocations in the tension process.Microstructure evolution analysis further confirms that the plastic deformation mechanism transition is ascribed to the orientation-dependent tensile behavior at the crack tip,which is intrinsically attributed to the anisotropy of the certain crystal structure and loading direction of the cracked Ti/Ni nanolaminate.In addition,by analyzing the effects of different plastic deformation carriers on crack propagation in specific crystal,it can be discovered that the interfacial dislocations moving towards the crack tip can further promote the crack growth.

Dynamic plastic response of clamped stiffened plates with large deflection

Study on the dynamic response, and especially the nonlinear dynamic response of stiffened plates is complicated by their discontinuity and inhomogeneity. The finite element method (FEM) and the finite strip method are usually adopted in their analysis. Although many useful conclusions have been obtained, the computational cost is enormous. Based on some assumptions, the dynamic plastic response of clamped stiffened plates with large deflections was theoretically investigated herein by a singly symmetric beam model. Firstly, the deflection conditions that a plastic string must satisfy were obtained by the linearized moment-axial force interaction curve for singly symmetric cross sections and the associated plastic flow rule. Secondly, the possible motion mechanisms of the beam under different load intensity were analysed in detail. For structures with plastic deformations, a simplified method was then given that the arbitrary impact load can be replaced equivalently by a rectangular pulse. Finally, to confirm the validity of the proposed method, the dynamic plastic response of a one-way stiffened plate with four fully clamped edges was calculated. The theoretical results were in good agreement with those of FEM. It indicates that the present calculation model is easy and feasible, and the equivalent substitution of load almost has no influence on the final deflection.

TIME DISCONTINUOUS GALERKIN FINITE ELEMENT METHOD FOR DYNAMIC ANALYSES IN SATURATED PORO-ELASTO-PLASTIC MEDIUM

A time-discontinuous Galerkin finite element method for dynamic analyses in saturated poro-elasto-plastic medium is proposed.As compared with the existing discontinuous Galerkin finite element methods,the distinct feature of the proposed method is that the continuity of the displacement vector at each discrete time instant is automatically ensured,whereas the discontinuity of the velocity vector at the discrete time levels still remains.The computational cost is then obviously reduced, particularly,for material non-linear problems.Both the implicit and explicit algorithms to solve the derived formulations for material non-linear problems are developed.Numerical results show a good performance of the present method in eliminating spurious numerical oscillations and providing with much more accurate solutions over the traditional Galerkin finite element method using the Newmark algorithm in the time domain.

Contact dynamics of elasto-plastic thin beams simulated via absolute nodal coordinate formulation

Under the frame of multibody dynamics, the contact dynamics of elasto-plastic spatial thin beams is numerically studied by using the spatial thin beam elements of absolute nodal coordinate formulation（ANCF）. The internal force of the elasto-plastic spatial thin beam element is derived under the assumption that the plastic strain of the beam element depends only on its longitudinal deformation.A new body-fixed local coordinate system is introduced into the spatial thin beam element of ANCF for efficient contact detection in the contact dynamics simulation. The linear isotropic hardening constitutive law is used to describe the elasto-plastic deformation of beam material, and the classical return mapping algorithm is adopted to evaluate the plastic strains. A multi-zone contact approach of thin beams previously proposed by the authors is also introduced to detect the multiple contact zones of beams accurately, and the penalty method is used to compute the normal contact force of thin beams in contact. Four numerical examples are given to demonstrate the applicability and effectiveness of the proposed elasto-plastic spatial thin beam element of ANCF for flexible multibody system dynamics.